- 04 Oct, 2018 30 commits
-
-
Jan Beulich authored
[ Upstream commit 6709812f ] Sadly, other than claimed in: a368d7fd ("x86/entry/64: Add instruction suffix") ... there are two more instances which want to be adjusted. As said there, omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the other missing suffixes here as well. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5B3A02DD02000078001CFB78@prv1-mh.provo.novell.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Gerlach authored
[ Upstream commit 6d609b35 ] When the RTC lock and unlock functions were introduced it was likely assumed that they would always be called from irq enabled context, hence the use of local_irq_disable/enable. This is no longer true as the RTC+DDR path makes a late call during the suspend path after irqs have been disabled to enable the RTC hwmod which calls both unlock and lock, leading to IRQs being reenabled through the local_irq_enable call in omap_hwmod_rtc_lock call. To avoid this change the local_irq_disable/enable to local_irq_save/restore to ensure that from whatever context this is called the proper IRQ configuration is maintained. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit dbd0fbc7 ] Add a missing header otherwise compiler warns about missed prototype: CC arch/x86/kernel/tsc_msr.o arch/x86/kernel/tsc_msr.c:73:15: warning: no previous prototype for ‘cpu_khz_from_msr’ [-Wmissing-prototypes] unsigned long cpu_khz_from_msr(void) ^~~~~~~~~~~~~~~~ Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Link: https://lkml.kernel.org/r/20180629193113.84425-4-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Peter Seiderer authored
[ Upstream commit a38d4b71 ] - fixes gstreamer v4l2src warning: 0:00:00.716640334 349 0x164f720 WARN v4l2bufferpool gstv4l2bufferpool.c:1195:gst_v4l2_buffer_pool_dqbuf:<v4l2src0:pool:src> Driver should never set v4l2_buffer.field to ANY - fixes v4l2-compliance test failure: Streaming ioctls: test read/write: OK (Not Supported) Video Capture: Buffer: 0 Sequence: 0 Field: Any Timestamp: 58.383658s fail: v4l2-test-buffers.cpp(297): g_field() == V4L2_FIELD_ANY Signed-off-by:
Peter Seiderer <ps.report@gmx.net> Reviewed-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 662a99e1 ] viu_of_probe() ignores fails in i2c_get_adapter(), tries to unlock uninitialized mutex on error path. The patch streamlining the error handling in viu_of_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hari Bathini authored
[ Upstream commit 8950329c ] Memory reservation for crashkernel could fail if there are holes around kdump kernel offset (128M). Fail gracefully in such cases and print an error message. Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Tested-by:
David Gibson <dgibson@redhat.com> Reviewed-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Tarick Bedeir authored
[ Upstream commit f1228867 ] rdma_ah_find_type() can reach into ib_device->port_immutable with a potentially out-of-bounds port number, so check that the port number is valid first. Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by:
Tarick Bedeir <tarick@google.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 7c1b9a5a ] This patch fixes potential NULL pointer dereference as indicated by the following static checker warning: drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane() error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'. Fixes: 34947b8a: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit c2d7c8ff ] "nents" is an unsigned int, so if ib_map_mr_sg() returns a negative error code then it's type promoted to a high unsigned int which is treated as success. Fixes: a060b562 ("IB/core: generic RDMA READ/WRITE API") Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit 5d9a2b0e ] VMA lookup is supposed to be performed while mmap_sem is held. Fixes: f26c7c83 ("i40iw: Add 2MB page support") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 474e5a86 ] The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl(). It has sgid_tbl->max elements. So the > should be >= to prevent accessing one element beyond the end of the array. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Guoqing Jiang authored
[ Upstream commit 010228e4 ] When one node leaves cluster or stops the resyncing (resync or recovery) array, then other nodes need to call recover_bitmaps to continue the unfinished task. But we need to clear suspend_area later after other nodes copy the resync information to their bitmap (by call bitmap_copy_from_slot). Otherwise, all nodes could write to the suspend_area even the suspend_area is not handled by any node, because area_resyncing returns 0 at the beginning of raid1_write_request. Which means one node could write suspend_area while another node is resyncing the same area, then data could be inconsistent. So let's clear suspend_area later to avoid above issue with the protection of bm lock. Also it is straightforward to clear suspend_area after nodes have copied the resync info to bitmap. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 3ffa6583 ] If a device gets removed right after having registered a power_supply node, we might enter in a deadlock between the remove call (that has a lock on the parent device) and the deferred register work. Allow the deferred register work to exit without taking the lock when we are in the remove state. Stack trace on a Ubuntu 16.04: [16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds. [16072.109127] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109132] kworker/u16:2 D 0 1180 2 0x80000000 [16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work [16072.109144] Call Trace: [16072.109152] __schedule+0x3d6/0x8b0 [16072.109155] schedule+0x36/0x80 [16072.109158] schedule_preempt_disabled+0xe/0x10 [16072.109161] __mutex_lock.isra.2+0x2ab/0x4e0 [16072.109166] __mutex_lock_slowpath+0x13/0x20 [16072.109168] ? __mutex_lock_slowpath+0x13/0x20 [16072.109171] mutex_lock+0x2f/0x40 [16072.109174] power_supply_deferred_register_work+0x2b/0x50 [16072.109179] process_one_work+0x15b/0x410 [16072.109182] worker_thread+0x4b/0x460 [16072.109186] kthread+0x10c/0x140 [16072.109189] ? process_one_work+0x410/0x410 [16072.109191] ? kthread_create_on_node+0x70/0x70 [16072.109194] ret_from_fork+0x35/0x40 [16072.109199] INFO: task test:2257 blocked for more than 120 seconds. [16072.109202] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109206] test D 0 2257 2256 0x00000004 [16072.109208] Call Trace: [16072.109211] __schedule+0x3d6/0x8b0 [16072.109215] schedule+0x36/0x80 [16072.109218] schedule_timeout+0x1f3/0x360 [16072.109221] ? check_preempt_curr+0x5a/0xa0 [16072.109224] ? ttwu_do_wakeup+0x1e/0x150 [16072.109227] wait_for_completion+0xb4/0x140 [16072.109230] ? wait_for_completion+0xb4/0x140 [16072.109233] ? wake_up_q+0x70/0x70 [16072.109236] flush_work+0x129/0x1e0 [16072.109240] ? worker_detach_from_pool+0xb0/0xb0 [16072.109243] __cancel_work_timer+0x10f/0x190 [16072.109247] ? device_del+0x264/0x310 [16072.109250] ? __wake_up+0x44/0x50 [16072.109253] cancel_delayed_work_sync+0x13/0x20 [16072.109257] power_supply_unregister+0x37/0xb0 [16072.109260] devm_power_supply_release+0x11/0x20 [16072.109263] release_nodes+0x110/0x200 [16072.109266] devres_release_group+0x7c/0xb0 [16072.109274] wacom_remove+0xc2/0x110 [wacom] [16072.109279] hid_device_remove+0x6e/0xd0 [hid] [16072.109284] device_release_driver_internal+0x158/0x210 [16072.109288] device_release_driver+0x12/0x20 [16072.109291] bus_remove_device+0xec/0x160 [16072.109293] device_del+0x1de/0x310 [16072.109298] hid_destroy_device+0x27/0x60 [hid] [16072.109303] usbhid_disconnect+0x51/0x70 [usbhid] [16072.109308] usb_unbind_interface+0x77/0x270 [16072.109311] device_release_driver_internal+0x158/0x210 [16072.109315] device_release_driver+0x12/0x20 [16072.109318] usb_driver_release_interface+0x77/0x80 [16072.109321] proc_ioctl+0x20f/0x250 [16072.109325] usbdev_do_ioctl+0x57f/0x1140 [16072.109327] ? __wake_up+0x44/0x50 [16072.109331] usbdev_ioctl+0xe/0x20 [16072.109336] do_vfs_ioctl+0xa4/0x600 [16072.109339] ? vfs_write+0x15a/0x1b0 [16072.109343] SyS_ioctl+0x79/0x90 [16072.109347] entry_SYSCALL_64_fastpath+0x24/0xab [16072.109349] RIP: 0033:0x7f20da807f47 [16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47 [16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009 [16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010 [16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000 [16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000 Reported-and-tested-by:
Richard Hughes <rhughes@redhat.com> Tested-by:
Aaron Skomra <Aaron.Skomra@wacom.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Fixes: 7f1a57fd ("power_supply: Fix possible NULL pointer dereference on early uevent") Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 5bedf8aa ] Since proc_dointvec does not perform value range control, proc_dointvec_minmax should be used to limit value range, which is clearly intended here, as the internal representation of the value: unsigned int alloc_pgste:1; In fact it currently works, since we have mm->context.alloc_pgste = page_table_allocate_pgste || ... ... since commit 23fefe11 ("s390/kvm: avoid global config of vm.alloc_pgste=1") Before that it was mm->context.alloc_pgste = page_table_allocate_pgste; which was broken. That was introduced with commit 0b46e0a3 ("s390/kvm: remove delayed reallocation of page tables for KVM"). Fixes: 0b46e0a3 ("s390/kvm: remove delayed reallocation of page tables for KVM") Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 37952146 ] Fixes the following splat during boot: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 128, pid: 77, name: kworker/2:1 4 locks held by kworker/2:1/77: #0: (ptrval) ((wq_completion)"events"){+.+.}, at: process_one_work+0x1fc/0x8fc #1: (ptrval) (deferred_probe_work){+.+.}, at: process_one_work+0x1fc/0x8fc #2: (ptrval) (&dev->mutex){....}, at: __device_attach+0x40/0x178 #3: (ptrval) (msm_iommu_lock){....}, at: msm_iommu_add_device+0x28/0xcc irq event stamp: 348 hardirqs last enabled at (347): [<c049dc18>] kfree+0xe0/0x3c0 hardirqs last disabled at (348): [<c0c35cac>] _raw_spin_lock_irqsave+0x2c/0x68 softirqs last enabled at (0): [<c0322fd8>] copy_process.part.5+0x280/0x1a68 softirqs last disabled at (0): [<00000000>] (null) Preemption disabled at: [<00000000>] (null) CPU: 2 PID: 77 Comm: kworker/2:1 Not tainted 4.17.0-rc5-wt-ath-01075-gaca0516bb4cf #239 Hardware name: Generic DT based system Workqueue: events deferred_probe_work_func [<c0314e00>] (unwind_backtrace) from [<c030fc70>] (show_stack+0x20/0x24) [<c030fc70>] (show_stack) from [<c0c16ad8>] (dump_stack+0xa0/0xcc) [<c0c16ad8>] (dump_stack) from [<c035a978>] (___might_sleep+0x1f8/0x2d4) ath10k_sdio mmc2:0001:1: Direct firmware load for ath10k/QCA9377/hw1.0/board-2.bin failed with error -2 [<c035a978>] (___might_sleep) from [<c035aac4>] (__might_sleep+0x70/0xa8) [<c035aac4>] (__might_sleep) from [<c0c3066c>] (__mutex_lock+0x50/0xb28) [<c0c3066c>] (__mutex_lock) from [<c0c31170>] (mutex_lock_nested+0x2c/0x34) ath10k_sdio mmc2:0001:1: board_file api 1 bmi_id N/A crc32 544289f7 [<c0c31170>] (mutex_lock_nested) from [<c052d798>] (kernfs_find_and_get_ns+0x30/0x5c) [<c052d798>] (kernfs_find_and_get_ns) from [<c0531cc8>] (sysfs_add_link_to_group+0x28/0x58) [<c0531cc8>] (sysfs_add_link_to_group) from [<c07ef75c>] (iommu_device_link+0x50/0xb4) [<c07ef75c>] (iommu_device_link) from [<c07f2288>] (msm_iommu_add_device+0xa0/0xcc) [<c07f2288>] (msm_iommu_add_device) from [<c07ec6d0>] (add_iommu_group+0x3c/0x64) [<c07ec6d0>] (add_iommu_group) from [<c07f9d40>] (bus_for_each_dev+0x84/0xc4) [<c07f9d40>] (bus_for_each_dev) from [<c07ec7c8>] (bus_set_iommu+0xd0/0x10c) [<c07ec7c8>] (bus_set_iommu) from [<c07f1a68>] (msm_iommu_probe+0x5b8/0x66c) [<c07f1a68>] (msm_iommu_probe) from [<c07feaa8>] (platform_drv_probe+0x60/0xbc) [<c07feaa8>] (platform_drv_probe) from [<c07fc1fc>] (driver_probe_device+0x30c/0x4cc) [<c07fc1fc>] (driver_probe_device) from [<c07fc59c>] (__device_attach_driver+0xac/0x14c) [<c07fc59c>] (__device_attach_driver) from [<c07f9e14>] (bus_for_each_drv+0x68/0xc8) [<c07f9e14>] (bus_for_each_drv) from [<c07fbd3c>] (__device_attach+0xe4/0x178) [<c07fbd3c>] (__device_attach) from [<c07fc698>] (device_initial_probe+0x1c/0x20) [<c07fc698>] (device_initial_probe) from [<c07faee8>] (bus_probe_device+0x98/0xa0) [<c07faee8>] (bus_probe_device) from [<c07fb4f4>] (deferred_probe_work_func+0x74/0x198) [<c07fb4f4>] (deferred_probe_work_func) from [<c0348eb4>] (process_one_work+0x2c4/0x8fc) [<c0348eb4>] (process_one_work) from [<c03497b0>] (worker_thread+0x2c4/0x5cc) [<c03497b0>] (worker_thread) from [<c0350d10>] (kthread+0x180/0x188) [<c0350d10>] (kthread) from [<c03010b4>] (ret_from_fork+0x14/0x20) Fixes: 42df43b3 ("iommu/msm: Make use of iommu_device_register interface") Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Michael Scott authored
[ Upstream commit 03bc05e1 ] After decompression of 6lowpan socket data, an IPv6 header is inserted before the existing socket payload. After this, we reset the network_header value of the skb to account for the difference in payload size from prior to decompression + the addition of the IPv6 header. However, we fail to reset the mac_header value. Leaving the mac_header value untouched here, can cause a calculation error in net/packet/af_packet.c packet_rcv() function when an AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan interface. On line 2088, the data pointer is moved backward by the value returned from skb_mac_header(). If skb->data is adjusted so that it is before the skb->head pointer (which can happen when an old value of mac_header is left in place) the kernel generates a panic in net/core/skbuff.c line 1717. This panic can be generated by BLE 6lowpan interfaces (such as bt0) and 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan sources for compression and decompression. Signed-off-by:
Michael Scott <michael@opensourcefoundries.com> Acked-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit a420b5d9 ] Make sure to return -EIO in case of a short modem-status read request. While at it, split the debug message to not include the (zeroed) transfer-buffer content in case of errors. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jian-Hong Pan authored
[ Upstream commit 45ae68b8 ] Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Zhen Lei authored
[ Upstream commit 3c120143 ] Although the mapping has already been removed in the page table, it maybe still exist in TLB. Suppose the freed IOVAs is reused by others before the flush operation completed, the new user can not correctly access to its meomory. Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Fixes: b1516a14 ('iommu/amd: Implement flush queue') Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 09bebb1a ] Vexpress platforms provide two different restart handlers: SYS_REBOOT that restart the entire system, while DB_RESET only restarts the daughter board containing the CPU. DB_RESET is overridden by SYS_REBOOT if it exists. notifier_chain_register used in register_restart_handler by design relies on notifiers to be registered once only, however vexpress restart notifier can get registered twice. When this happen it corrupts list of notifiers, as result some notifiers can be not called on proper event, traverse on list can be cycled forever, and second unregister can access already freed memory. So far, since this was the only restart handler in the system, no issue was observed even if the same notifier was registered twice. However commit 6c5c0d48 ("watchdog: sp805: add restart handler") added support for SP805 restart handlers and since the system under test contains two vexpress restart and two SP805 watchdog instances, it was observed that during the boot traversing the restart handler list looped forever as there's a cycle in that list resulting in boot hang. This patch fixes the issues by ensuring that the notifier is installed only once. Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Fixes: 46c99ac6 ("power/reset: vexpress: Register with kernel restart handler") Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 11b71782 ] hwarc_probe() allocates memory for hwarc, but does not free it if uwb_rc_add() or hwarc_get_version() fail. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit c5a9262f ] The RX FIFO timer may be armed when the port is shut down, hence the timer function may still be called afterwards. Fix this race condition by deleting the timer during port shutdown. Fixes: 03940376 ("serial: sh-sci: SCIFA/B RX FIFO software timeout") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit d5b9653d ] Make sure to enable the clock before registering regions and exporting partitions to user space at which point we must be prepared for I/O. Fixes: ee895ccd ("misc: sram: fix enabled clock leak on error path") Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit f2a42595 ] We should look at val which contains the value read from the register, not ret which is always 0 on a successful read. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Fixes: eac53b36 ("power: supply: axp288_charger: Drop platform_data dependency") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit c5fae4f4 ] Currently the check on error return from the call to rtsx_write_register is checking the error status from the previous call. Fix this by adding in the missing assignment of retval. Detected by CoverityScan, CID#709877 Fixes: fa590c22 ("staging: rts5208: add support for rts5208 and rts5288") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Williams authored
[ Upstream commit 3b6c62f3 ] Without this change the distance table calculation for emulated nodes may use the wrong numa node and report an incorrect distance. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/153089328103.27680.14778434392225818887.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 7fb2fd4e ] The problem is that if get_user_pages_fast() fails and returns a negative error code, it gets type promoted to a high positive value and treated as a success. Fixes: 06164d2b ("VMCI: queue pairs implementation.") Signed-off-by:
-
Matt Ranostay authored
[ Upstream commit ce054546 ] ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN. This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit 7d6cd21d ] When the buffer is enabled for ina2xx driver, a dedicated kthread is invoked to capture mesurement data. When the buffer is disabled, the kthread is stopped. However if the kthread gets register access errors, it immediately exits and when the malfunctional buffer is disabled, the stale task_struct pointer is accessed as there is no kthread to be stopped. A similar issue in the usbip driver is prevented by kthread_get_run and kthread_stop_put helpers by increasing usage count of the task_struct. This change applies the same solution. Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Fixes: c43a102e ("iio: ina2xx: add support for TI INA2xx Power Monitors") Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Stafford Horne authored
[ Upstream commit cefd769f ] As of GCC 9.0.0 the build is reporting warnings like: crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’: crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation] strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(rblkcipher.geniv)); ~~~~~~~~~~~~~~~~~~~~~~~~~ This means the strnycpy might create a non null terminated string. Fix this by explicitly performing '\0' termination. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 29 Sep, 2018 10 commits
-
-
Greg Kroah-Hartman authored
-
Geert Uytterhoeven authored
commit 04b2d03a upstream. If the SPI bus number is provided by a DT alias, idr_alloc() is called twice, leading to: WARNING: CPU: 1 PID: 1 at drivers/spi/spi.c:2179 spi_register_controller+0x11c/0x5d8 couldn't get idr Fix this by moving the handling of fixed SPI bus numbers up, before the DT handling code fills in ctlr->bus_num. Fixes: 1a4327fb ("spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by:
-
Thomas Gleixner authored
Commit 0a0e0829 ("nohz: Fix missing tick reprogram when interrupting an inline softirq") got backported to stable trees and now causes the NOHZ softirq pending warning to trigger. It's not an upstream issue as the NOHZ update logic has been changed there. The problem is when a softirq disabled section gets interrupted and on return from interrupt the tick/nohz state is evaluated, which then can observe pending soft interrupts. These soft interrupts are legitimately pending because they cannot be processed as long as soft interrupts are disabled and the interrupted code will correctly process them when soft interrupts are reenabled. Add a check for softirqs disabled to the pending check to prevent the warning. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reported-by:
John Crispin <john@phrozen.org> Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Tested-by:
-
Steve Wise authored
commit 308aa2b8 upstream. Once the qp has been flushed, it cannot be flushed again. The user qp flush logic wasn't enforcing it however. The bug can cause touch-after-free crashes like: Unable to handle kernel paging request for data at address 0x000001ec Faulting instruction address: 0xc008000016069100 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4] LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] Call Trace: [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] [c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4] [c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core] [c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core] [c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm] [c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm] [c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm] [c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm] [c000000000444da4] __fput+0xe4/0x2f0 So fix flush_qp() to only flush the wq once. Cc: stable@vger.kernel.org Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Nadav Amit authored
commit a3b92ee6 upstream. Fix a build error due to missing virt_to_phys() Reported-by:
kbuild test robot <lkp@intel.com> Fixes: f0a1bf29 ("vmw_balloon: fix inflation with batching") Cc: stable@vger.kernel.org Cc: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
Zachary Zhang authored
commit 91a2968e upstream. The PCIE I/O and MEM resource allocation mechanism is that root bus goes through the following steps: 1. Check PCI bridges' range and computes I/O and Mem base/limits. 2. Sort all subordinate devices I/O and MEM resource requirements and allocate the resources and writes/updates subordinate devices' requirements to PCI bridges I/O and Mem MEM/limits registers. Currently, PCI Aardvark driver only handles the second step and lacks the first step, so there is an I/O and MEM resource allocation failure when using a PCI switch. This commit fixes that by sizing bridges before doing the resource allocation. Fixes: 8c39d710 ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by:
Zachary Zhang <zhangzg@marvell.com> [Thomas: edit commit log.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Steve Muckle authored
commit d0cdb3ce upstream. When a task which previously ran on a given CPU is remotely queued to wake up on that same CPU, there is a period where the task's state is TASK_WAKING and its vruntime is not normalized. This is not accounted for in vruntime_normalized() which will cause an error in the task's vruntime if it is switched from the fair class during this time. For example if it is boosted to RT priority via rt_mutex_setprio(), rq->min_vruntime will not be subtracted from the task's vruntime but it will be added again when the task returns to the fair class. The task's vruntime will have been erroneously doubled and the effective priority of the task will be reduced. Note this will also lead to inflation of all vruntimes since the doubled vruntime value will become the rq's min_vruntime when other tasks leave the rq. This leads to repeated doubling of the vruntime and priority penalty. Fix this by recognizing a WAKING task's vruntime as normalized only if sched_remote_wakeup is true. This indicates a migration, in which case the vruntime would have been normalized in migrate_task_rq_fair(). Based on a similar patch from John Dias <joaodias@google.com>. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Steve Muckle <smuckle@google.com> Signed-off-by:
-
Eric Biggers authored
commit 338affb5 upstream. When in effect, add "test_dummy_encryption" to _ext4_show_options() so that it is shown in /proc/mounts and other relevant procfs files. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Li Dongyang authored
commit fe18d649 upstream. Marking mmp bh dirty before writing it will make writeback pick up mmp block later and submit a write, we don't want the duplicate write as kmmpd thread should have full control of reading and writing the mmp block. Another reason is we will also have random I/O error on the writeback request when blk integrity is enabled, because kmmpd could modify the content of the mmp block(e.g. setting new seq and time) while the mmp block is under I/O requested by writeback. Signed-off-by:
Li Dongyang <dongyangli@ddn.com> Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 5f8c1093 upstream. An online resize of a file system with the bigalloc feature enabled and a 1k block size would be refused since ext4_resize_begin() did not understand s_first_data_block is 0 for all bigalloc file systems, even when the block size is 1k. Signed-off-by:
-
