Skip to content

L
linux
Switch branch/tag
  1. 23 Jul, 2014 1 commit
  3. 06 Jul, 2014 4 commits
    • Linus Torvalds's avatar
      Linux 3.16-rc4 · cd3de83f
      Linus Torvalds authored
      cd3de83f
    • Linus Torvalds's avatar
      Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux · 100193f5
      Linus Torvalds authored 
      Pull devicetree bugfix from Grant Likely:
 "Important bug fix for parsing 64-bit addresses on 32-bit platforms.
  Without this patch the kernel will try to use memory ranges that
  cannot be reached"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  of: Check for phys_addr_t overflows in early_init_dt_add_memory_arch
      100193f5
    • Linus Torvalds's avatar
      Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 8addf0c7
      Linus Torvalds authored 
      Pull SCSI fixes from James Bottomley:
 "This is a set of 13 fixes, a MAINTAINERS update and a sparse update.
  The fixes are mostly correct value initialisations, avoiding NULL
  derefs and some uninitialised pointer avoidance.

  All the patches have been incubated in -next for a few days.  The
  final patch (use the scsi data buffer length to extract transfer size)
  has been rebased to add a cc to stable, but only the commit message
  has changed"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] use the scsi data buffer length to extract transfer size
  virtio-scsi: fix various bad behavior on aborted requests
  virtio-scsi: avoid cancelling uninitialized work items
  ibmvscsi: Add memory barriers for send / receive
  ibmvscsi: Abort init sequence during error recovery
  qla2xxx: Fix sparse warning in qla_target.c.
  bnx2fc: Improve stats update mechanism
  bnx2fc: do not scan uninitialized lists in case of error.
  fc: ensure scan_work isn't active when freeing fc_rport
  pm8001: Fix potential null pointer dereference and memory leak.
  MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs
  be2iscsi: remove potential junk pointer free
  be2iscsi: add an missing goto in error path
  scsi_error: set DID_TIME_OUT correctly
  scsi_error: fix invalid setting of host byte
      8addf0c7
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 110e4308
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "i915, tda998x and vmwgfx fixes,

  The main one is i915 fix for missing VGA connectors, along with some
  fixes for the tda998x from Russell fixing some modesetting problems.

  (still on holidays, but got a spare moment to find these)"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix incorrect write to read-only register v2:
  drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin
  drm/i915: only apply crt_present check on VLV
  drm/i915: Wait for vblank after enabling the primary plane on BDW
  drm/i2c: tda998x: add some basic mode validation
  drm/i2c: tda998x: faster polling for edid
  drm/i2c: tda998x: move drm_i2c_encoder_destroy call
      110e4308
  5. 05 Jul, 2014 12 commits
  7. 04 Jul, 2014 15 commits
  9. 03 Jul, 2014 8 commits
    • Greg Kroah-Hartman's avatar
      lz4: add overrun checks to lz4_uncompress_unknownoutputsize() · 4a3a9904
      Greg Kroah-Hartman authored 
      Jan points out that I forgot to make the needed fixes to the
lz4_uncompress_unknownoutputsize() function to mirror the changes done
in lz4_decompress() with regards to potential pointer overflows.

The only in-kernel user of this function is the zram code, which only
takes data from a valid compressed buffer that it made itself, so it's
not a big issue.  But due to external kernel modules using this
function, it's better to be safe here.
Reported-by: default avatarJan Beulich <JBeulich@suse.com>
Cc: "Don A. Bailey" <donb@securitymouse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4a3a9904
    • James Bottomley's avatar
      Merge remote-tracking branch 'scsi-queue/drivers-for-3.16' into for-linus · 77ae174d
      James Bottomley authored
      77ae174d
    • Martin K. Petersen's avatar
      [SCSI] use the scsi data buffer length to extract transfer size · 5616b0a4
      Martin K. Petersen authored 
      Commit 8846bab1 introduced a helper that can be used to query the
wire transfer size for a SCSI command taking protection information into
account.

However, some commands do not have a 1:1 mapping between the block range
they work on and the payload size (discard, write same). After the
scatterlist has been set up these requests use __data_len to store the
number of bytes to report completion on. This means that callers of
scsi_transfer_length() would get the wrong byte count for these types of
requests.

To overcome this we make scsi_transfer_length() use the scatterlist
length in the scsi_data_buffer as basis for the wire transfer
calculation instead of __data_len.
Reported-by: default avatarChristoph Hellwig <hch@infradead.org>
Debugged-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarSagi Grimberg <sagig@mellanox.com>
Fixes: d77e6535
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
      5616b0a4
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew Morton) · 5170a3b2
      Linus Torvalds authored 
      Merge fixes from Andrew Morton:
 "14 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  shmem: fix init_page_accessed use to stop !PageLRU bug
  kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()"
  tools/testing/selftests/ipc/msgque.c: improve error handling when not running as root
  fs/seq_file: fallback to vmalloc allocation
  /proc/stat: convert to single_open_size()
  hwpoison: fix the handling path of the victimized page frame that belong to non-LRU
  mm:vmscan: update the trace-vmscan-postprocess.pl for event vmscan/mm_vmscan_lru_isolate
  msync: fix incorrect fstart calculation
  zram: revalidate disk after capacity change
  tools: memory-hotplug fix unexpected operator error
  tools: cpu-hotplug fix unexpected operator error
  autofs4: fix false positive compile error
  slub: fix off by one in number of slab tests
  mm: page_alloc: fix CMA area initialisation when pageblock > MAX_ORDER
      5170a3b2
    • Hugh Dickins's avatar
      shmem: fix init_page_accessed use to stop !PageLRU bug · 66d2f4d2
      Hugh Dickins authored 
      Under shmem swapping load, I sometimes hit the VM_BUG_ON_PAGE(!PageLRU)
in isolate_lru_pages() at mm/vmscan.c:1281!

Commit 2457aec6 ("mm: non-atomically mark page accessed during page
cache allocation where possible") looks like interrupted work-in-progress.

mm/filemap.c's call to init_page_accessed() is fine, but not mm/shmem.c's
- shmem_write_begin() is clearly wrong to use it after shmem_getpage(),
when the page is always visible in radix_tree, and often already on LRU.

Revert change to shmem_write_begin(), and use init_page_accessed() or
mark_page_accessed() appropriately for SGP_WRITE in shmem_getpage_gfp().

SGP_WRITE also covers shmem_symlink(), which did not mark_page_accessed()
before; but since many other filesystems use [__]page_symlink(), which did
and does mark the page accessed, consider this as rectifying an oversight.
Signed-off-by: default avatarHugh Dickins <hughd@google.com>
Acked-by: default avatarMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      66d2f4d2
    • Andrew Morton's avatar
      kernel/printk/printk.c: revert "printk: enable interrupts before calling... · d18bbc21
      Andrew Morton authored 
      kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()"

Revert commit 939f04be ("printk: enable interrupts before calling
console_trylock_for_printk()").

Andreas reported:

: None of the post 3.15 kernel boot for me. They all hang at the GRUB
: screen telling me it loaded and started the kernel, but the kernel
: itself stops before it prints anything (or even replaces the GRUB
: background graphics).

939f04be is modest latency reduction.  Revert it until we understand
the reason for these failures.
Reported-by: default avatarAndreas Bombe <aeb@debian.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d18bbc21
    • Shuah Khan's avatar
      tools/testing/selftests/ipc/msgque.c: improve error handling when not running as root · e84f1ab3
      Shuah Khan authored 
      The test fails in the middle when it is not run as root while accessing
/proc/sys/kernel/msg_next_id.  Changed it to check for root at the
beginning of the test and exit if not root.
Signed-off-by: default avatarShuah Khan <shuah.kh@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e84f1ab3
    • Heiko Carstens's avatar
      fs/seq_file: fallback to vmalloc allocation · 058504ed
      Heiko Carstens authored 
      There are a couple of seq_files which use the single_open() interface.
This interface requires that the whole output must fit into a single
buffer.

E.g.  for /proc/stat allocation failures have been observed because an
order-4 memory allocation failed due to memory fragmentation.  In such
situations reading /proc/stat is not possible anymore.

Therefore change the seq_file code to fallback to vmalloc allocations
which will usually result in a couple of order-0 allocations and hence
also work if memory is fragmented.

For reference a call trace where reading from /proc/stat failed:

  sadc: page allocation failure: order:4, mode:0x1040d0
  CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1
  [...]
  Call Trace:
    show_stack+0x6c/0xe8
    warn_alloc_failed+0xd6/0x138
    __alloc_pages_nodemask+0x9da/0xb68
    __get_free_pages+0x2e/0x58
    kmalloc_order_trace+0x44/0xc0
    stat_open+0x5a/0xd8
    proc_reg_open+0x8a/0x140
    do_dentry_open+0x1bc/0x2c8
    finish_open+0x46/0x60
    do_last+0x382/0x10d0
    path_openat+0xc8/0x4f8
    do_filp_open+0x46/0xa8
    do_sys_open+0x114/0x1f0
    sysc_tracego+0x14/0x1a
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: default avatarDavid Rientjes <rientjes@google.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com>
Cc: Andrea Righi <andrea@betterlinux.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      058504ed
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7