- 12 Feb, 2007 40 commits
-
-
Mike Chan authored
This fix/change returns the offset into the page for the ce/ue error, instead of just 0. The e752x dram controller reads 34:6 of the linear address with the error. Signed-off-by:
Mike Chan <mikechan@google.com> Signed-off-by:
doug thompson <norsk5@xmission.com> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Brian Pomerantz authored
The reading of the DRA registers should be a byte at a time (one register at a time) instead of 4 bytes at a time (four registers). Reading a dword at a time retrieves erroneous information from all but the first register. A change was made to read in each register in a loop prior to using the data in those registers. Signed-off-by:
Brian Pomerantz <bapper@mvista.com> Signed-off-by:
Dave Jiang <djiang@mvista.com> Signed-off-by:
-
Brian Pomerantz authored
The fatal vs. non-fatal mask for the sysbus FERR status is incorrect according to the E7520 datasheet. This patch corrects the mask to correctly handle fatal and non-fatal errors. Signed-off-by:
-
Eric W. Biederman authored
Now that I have changed all of the in-tree users remove the old version of these functions. This should make it clear to any out of tree users that they should be using kill_pgrp kill_pgrp_info or __kill_pgrp_info instead. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Eric W. Biederman authored
Now that I have changed all of the users remove the old version of these functions. This should be a clear hint to any out of tree users that they should use do_each_pid_task and while_each_pid_task for new code. Signed-off-by:
-
Eric W. Biederman authored
There isn't any real advantage to this change except that it allows the old functions to be removed. Which is easier on maintenance and puts the code in a more uniform style. Signed-off-by:
-
Eric W. Biederman authored
Of kernel subsystems that work with pids the tty layer is probably the largest consumer. But it has the nice virtue that the assiation with a session only lasts until the session leader exits. Which means that no reference counting is required. So using struct pid winds up being a simple optimization to avoid hash table lookups. In the long term the use of pid_nr also ensures that when we have multiple pid spaces mixed everything will work correctly. Signed-off-by:
Eric W. Biederman <eric@maxwell.lnxi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Eric W. Biederman authored
Every call to is_orphaned_pgrp passed in process_group(current) which is racy with respect to another thread changing our process group. It didn't bite us because we were dealing with integers and the worse we would get would be a stale answer. In switching the checks to use struct pid to be a little more efficient and prepare the way for pid namespaces this race became apparent. So I simplified the calls to the more specialized is_current_pgrp_orphaned so I didn't have to worry about making logic changes to avoid the race. Signed-off-by:
-
Eric W. Biederman authored
Modify has_stopped_jobs and will_become_orphan_pgrp to use struct pid based process groups. This reduces the number of hash tables looks ups and paves the way for multiple pid spaces. Signed-off-by:
-
Eric W. Biederman authored
To properly implement a pid namespace I need to deal exclusively in terms of struct pid, because pid_t values become ambiguous. To this end session_of_pgrp is transformed to take and return a struct pid pointer. To avoid the need to worry about reference counting I now require my caller to hold the appropriate locks. Leaving callers repsonsible for increasing the reference count if they need access to the result outside of the locks. Since session_of_pgrp currently only has one caller and that caller simply uses only test the result for equality with another process group, the locking change means I don't actually have to acquire the tasklist_lock at all. tiocspgrp is also modified to take and release the lock. The logic there is a little more complicated but nothing I won't need when I convert pgrp of a tty to a struct pid pointer. Signed-off-by:
-
Eric W. Biederman authored
The goal is to remove users of the old signal helper functions so they can be removed. Signed-off-by:
-
Eric W. Biederman authored
I am slowly moving to a model where all process killing is struct pid based instead of pid_t based. The sunos compatibility code is one of the last users of the old pid_t based kill_pg in the kernel. By being complete I allow for the future removal of kill_pg from the kernel, which will ensure I don't miss something. Signed-off-by:
-
Eric W. Biederman authored
commit 24ec839c while fixing the locking for signal->tty got the locking wrong for signal->session. This places our accesses of signal->session back under the tasklist_lock where they belong. Signed-off-by:
-
Eric W. Biederman authored
The code to look at tty_old_pgrp and send SIGHUP and SIGCONT when it is present only executes when disassociate_ctty is called from do_exit. Make this clear by adding an explict on_exit check, and explicitly setting tty_old_pgrp to 0. In addition fix the locking by reading tty_old_pgrp under the siglock. Signed-off-by:
-
Eric W. Biederman authored
The aim of this patch set is to start wrapping up the struct pid conversions. As such this patchset culminates with the removal of kill_pg, kill_pg_info, __kill_pg_info, do_each_task_pid, and while_each_task_pid. kill_proc, daemonize, and kernel_thread are still in my sights but there is still work to get to them. The first three are basic cleanups around disassociate_ctty, while working on converting it I found several issues. tty_old_pgrp can be a tricky concept to wrap your head around. 1 tty: Make __proc_set_tty static. 2 tty: Clarify disassociate_ctty 3 tty: Fix the locking for signal->session in disassociate_ctty These just stop using the old helper functions. 4 signal: Use kill_pgrp not kill_pg in the sunos compatibility code. 5 signal: Rewrite kill_something_info so it uses newer helpers. Then the grind to convert the tty layer and all of it's helper functions to struct pid. 6 pid: Make session_of_pgrp use struct pid instead of pid_t. 7 pid: Use struct pid for talking about process groups in exit.c 8 pid: Replace is_orphaned_pgrp with is_current_pgrp_orphaned 9 tty: Update the tty layer to work with struct pid. A final helper function update. 10 pid: Replace do/while_each_task_pid with do/while_each_pid_task And the removal of the functions that are now unused. 11 pid: Remove now unused do_each_task_pid and while_each_task_pid 12 pid: Remove the now unused kill_pg kill_pg_info and __kill_pg_info All of these should be fairly simple and to the point. This patch: Currently all users of __proc_set_tty are in tty_io.c so make the function static. Signed-off-by:
-
Andries Brouwer authored
This morning I needed to read a Minix V3 filesystem, but unfortunately my 2.6.19 did not support that, and neither did the downloaded 2.6.20rc4. Fortunately, google told me that Daniel Aragones had already done the work, patch found at http://www.terra.es/personal2/danarag/ Unfortunaly, looking at the patch was painful to my eyes, so I polished it a bit before applying. The resulting kernel boots, and reads the filesystem it needed to read. Signed-off-by:
Daniel Aragones <danarag@gmail.com> Signed-off-by:
Andries Brouwer <aeb@cwi.nl> Signed-off-by:
-
David Brownell authored
This is adds a simple SPI EEPROM driver, providing access to the EEPROM through sysfs much like the I2C "eeprom" driver ... except this driver supports write access, and multiple EEPROM sizes. From: "Tuppa, Walter" <walter.tuppa@siemens.com> Since I have EEPROMs on SPI with different address sizing, I made some changes to your at25.c to support them. Works perfectly. (Also includes a small bugfix for the "what size address" test.) Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Walter Tuppa <walter.tuppa@siemens.com> Signed-off-by:
-
David Brownell authored
This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by:Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
David Brownell authored
This clarifies some aspects of the SPI programming interface, based on feedback from Hans-Peter Nilsson. The in-memory representation of words is right-aligned, so for example a twelve bit word is stored using sixteen bits with four undefined bits in the MSB. And controller drivers must reject protocol tweaking modes they do not support. Signed-off-by:
-
Hans-Peter Nilsson authored
I'd like to assign NULL to kfree()d members of a structure. I can't do that without ugly casting (see the PXA patch) when the structure pointed to is const-qualified. I don't really see a reason why the cleanup method isn't allowed to alter the object it should clean up. :-) No, I didn't test the PXA patch, but I verified that the NULL-assignment doesn't stop me from doing rmmod/insmodding my own spi_bitbang-based driver. Signed-off-by:
Hans-Peter Nilsson <hp@axis.com> Signed-off-by:
-
Hans-Peter Nilsson authored
A small bug-fix for spi_bitbang: it must always call the setup_transfer function via the overridable pointer, not assume that its spi_bitbang_setup_transfer is sufficient. Otherwise, if all options in the transfers are default (0), the overrided function will never be called. Granted, the function replacing it must call spi_bitbang_setup_transfer, but it might also have other important things to do, even if the second argument (the spi_transfer) is NULL. Tested together with the other patches on the spi_crisv32_sser and spi_crisv32_gpio drivers (not yet in the kernel, will IIUC be submitted as part of the usual arch-maintainer-pushes). Signed-off-by:
-
Ben Dooks authored
Make the spi_unregister_driver() code fit in with the rest of the header file, and only do the action if the driver passed is non-NULL. This also makes the code a line smaller. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Ben Dooks authored
The spi_register_driver() sets the bus_type field of the spi_driver being registered, so there is no need to have it set in the driver itself. Signed-off-by:
-
Ben Dooks authored
Add wrappers for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, to mirror the platform_{get|set}_drvdata. Signed-off-by: -
Andrea Paterniani authored
Add the SPI controller driver for Freescale i.MX(S/L/1). Main features summary: > Per chip setup via board specific code and/or protocol driver. > Per transfer setup. > PIO transfers. > DMA transfers. > Managing of NULL tx / rx buffer for rd only / wr only transfers. This patch replace patch-2.6.20-rc4-spi_imx with the following changes: > Few cosmetic changes. > Function map_dma_buffers now return 0 for success and -1 for failure. > Solved a bug inside spi_imx_probe function (wrong error path). > Solved a bug inside setup function (bad undo setup for max_speed_hz). > For read-only transfers, always write zero bytes. This is almost the same as the 'BIS' version sent by Andrea, except for updating the 'DUMMY' byte so that read-only transfers shift out zeroes. That part of the API changed recently, since some half duplex peripheral chips require that semantic. Signed-off-by:
Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by:
-
David Brownell authored
This adds a SPI driver for the Microwire controller on OMAP1 chips. This driver has been used in the Linux-OMAP tree for some time now, including with some of those displays using standardized 9-bit commands followed by data with 8-bit words. Microwire only supports half duplex transfers, but that's all that most SPI protocols need. When full duplex, or higher speeds, are needed there are several other controllers that can be used on OMAP. [akpm@osdl.org: cleanups] Signed-off-by:
Imre Deak <imre.deak@solidboot.com> Signed-off-by:
Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by:
-
David Brownell authored
Minor Kconfig cleanup ... put the SPI_S3C24XX entry in the correct location (alphabetical order). Signed-off-by:
-
Jiri Kosina authored
drivers/char/ds1302.c::get_rtc_time() contains local_irq_disable() call after local_irq_save(). This looks redundant. drivers/char/ds1302.c::rtc_ioctl() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Tilman Schmidt authored
This patch adds the line discipline based driver for the Gigaset M101 wireless RS232 adapter. It also improves the documentation a bit. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
Hansjoerg Lipp <hjlipp@web.de> Signed-off-by:
-
Richard Knutsson authored
Convert: BOOL -> bool FALSE -> false TRUE -> true Change a variable ('mContinue') to boolean from char, since it is used as boolean. Signed-off-by:Richard Knutsson <ricknu-0@student.ltu.se> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jiri Slaby authored
- Use timer macros to set function and data members and to modify expiration time. - Use DEFINE_TIMER for global timers and do not init them at run-time in these cases. - del_timer_sync is common in most cases -- we want to wait for timer function if it's still running. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Dmitry Torokhov <dtor@mail.ru> (Input bits) Signed-off-by:
-
Jiri Slaby authored
specialix, isr have 2 params pt_regs are no longer the third parameter of isr, call sx_interrupt without it. Signed-off-by:
-
Prarit Bhargava authored
Change __init to __devinit in rtc drivers' probe functions. Resolves MODPOST warnings: WARNING: drivers/rtc/rtc-ds1553.o - Section mismatch: reference to .init.text:ds1553_rtc_probe from .data.rel between 'ds1553_rtc_driver' (at offset 0x0) and 'ds1553_nvram_attr' WARNING: drivers/rtc/rtc-ds1742.o - Section mismatch: reference to .init.text:ds1742_rtc_probe from .data.rel between 'ds1742_rtc_driver' (at offset 0x0) and 'ds1742_nvram_attr' Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mike Frysinger authored
Was ufs_fs.h purposefully not exported to userspace or did it just slip through the cracks ? assuming the latter scenario, the attached patch touches up the relationship between ufs_fs.h and its sub headers (like ufs_fs_sb.h) so that we can export it ... the silo bootloader takes advantage of this header for example. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by:
-
Ingo Molnar authored
close_files() can sometimes take long enough to trigger the soft lockup detector. Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Tilman Schmidt authored
Reduce the number of kernel messages the Gigaset drivers produce in case of an excessively long device response, from one per character exceeding the limit to one per overlong message. Signed-off-by:
-
Tilman Schmidt authored
Do not lock the cardstate structure mutex earlier than necessary. Signed-off-by:
-
Eric Dumazet authored
oprofile hunting showed a stall in rw_verify_area(), because of triple indirection and potential cache misses. (file->f_path.dentry->d_inode->i_flock) By moving initialization of 'struct inode' pointer before the pos/count sanity tests, we allow the compiler and processor to perform two loads by anticipation, reducing stall, without prefetch() hints. Even x86 arch has enough registers to not use temporary variables and not increase text size. I validated this patch running a bench and studied oprofile changes, and absolute perf of the test program. Results of my epoll_pipe_bench (source available on request) on a Pentium-M 1.6 GHz machine Before : # ./epoll_pipe_bench -l 30 -t 20 Avg: 436089 evts/sec read_count=8843037 write_count=8843040 21.218390 samples per call (best value out of 10 runs) After : # ./epoll_pipe_bench -l 30 -t 20 Avg: 470980 evts/sec read_count=9549871 write_count=9549894 21.216694 samples per call (best value out of 10 runs) oprofile CPU_CLK_UNHALTED events gave a reduction from 5.3401 % to 2.5851 % for the rw_verify_area() function. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Randy Dunlap authored
Need to export com20020 symbols for com20020_cs also. WARNING: "com20020_found" [drivers/net/pcmcia/com20020_cs.ko] undefined! WARNING: "com20020_check" [drivers/net/pcmcia/com20020_cs.ko] undefined! Signed-off-by:
-
Heiko Carstens authored
3117df04 causes this: In file included from arch/s390/kernel/early.c:13: include/linux/lockdep.h:300: warning: "struct task_struct" declared inside parameter list include/linux/lockdep.h:300: warning: its scope is only this definition or declaration, which is probably not what you want Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
