- 20 Mar, 2013 1 commit
-
-
Dan Williams authored
commit 2d90e636 upstream. 4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 Mar, 2013 39 commits
-
-
Greg Kroah-Hartman authored
-
David S. Miller authored
commit a07fdcec upstream. It's called from both __init and __exit code, so neither tag is appropriate. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric W. Biederman authored
commit e66eded8 upstream. Don't allowing sharing the root directory with processes in a different user namespace. There doesn't seem to be any point, and to allow it would require the overhead of putting a user namespace reference in fs_struct (for permission checks) and incrementing that reference count on practically every call to fork. So just perform the inexpensive test of forbidding sharing fs_struct acrosss processes in different user namespaces. We already disallow other forms of threading when unsharing a user namespace so this should be no real burden in practice. This updates setns, clone, and unshare to disallow multiple user namespaces sharing an fs_struct. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hauke Mehrtens authored
commit 06a8f1fe upstream. This fixes the following section mismatch: WARNING: drivers/w1/masters/w1-gpio.o(.data+0x188): Section mismatch in reference from the variable w1_gpio_driver to the function .init.text:w1_gpio_probe() The variable w1_gpio_driver references the function __init w1_gpio_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 01c681d4 upstream (ef56ca64 in this tree), as it wasn't supposed to have been applied to the stable tree. Cc: Jan Beulich <jbeulich@suse.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Sarah Sharp authored
[This is upstream commit d3b9d7a9. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5e "USB: Handle warm reset failure on empty port."] A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit transition fails. The current code in hub_events simply issues a warm reset, but does not call any pre-reset or post-reset driver methods (or unbind/rebind drivers without them). Therefore the drivers won't know their device has just been reset. hub_events should instead call usb_reset_device. This means hub_port_reset now needs to figure out whether it should issue a warm reset or a hot reset. Remove the FIXME note about needing disconnect() for a NOTATTACHED device. This patch fixes that. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Sarah Sharp authored
[This is upstream commit a24a6078. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5e "USB: Handle warm reset failure on empty port."] When a hot reset fails on a USB 3.0 port, the current port reset code recursively calls hub_port_reset inside hub_port_wait_reset. This isn't ideal, since we should avoid recursive calls in the kernel, and it also doesn't allow us to issue multiple warm resets on reset failures. Rip out the recursive call. Instead, add code to hub_port_reset to issue a warm reset if the hot reset fails, and try multiple warm resets before giving up on the port. In hub_port_wait_reset, remove the recursive call and re-indent. The code is basically the same, except: 1. It bails out early if the port has transitioned to Inactive or Compliance Mode after the reset completed. 2. It doesn't consider a connect status change to be a failed reset. If multiple warm resets needed to be issued, the connect status may have changed, so we need to ignore that and look at the port link state instead. hub_port_reset will now do that. 3. It unconditionally sets udev->speed on all types of successful resets. The old recursive code would set the port speed when the second hub_port_reset returned. The old code did not handle connected devices needing a warm reset well. There were only two situations that the old code handled correctly: an empty port needing a warm reset, and a hot reset that migrated to a warm reset. When an empty port needed a warm reset, hub_port_reset was called with the warm variable set. The code in hub_port_finish_reset would skip telling the USB core and the xHC host that the device was reset, because otherwise that would result in a NULL pointer dereference. When a USB 3.0 device reset migrated to a warm reset, the recursive call made the call stack look like this: hub_port_reset(warm = false) hub_wait_port_reset(warm = false) hub_port_reset(warm = true) hub_wait_port_reset(warm = true) hub_port_finish_reset(warm = true) (return up the call stack to the first wait) hub_port_finish_reset(warm = false) The old code didn't want to notify the USB core or the xHC host of device reset twice, so it only did it in the second call to hub_port_finish_reset, when warm was set to false. This was necessary because before patch two ("USB: Ignore xHCI Reset Device status."), the USB core would pay attention to the xHC Reset Device command error status, and the second call would always fail. Now that we no longer have the recursive call, and warm can change from false to true in hub_port_reset, we need to have hub_port_finish_reset unconditionally notify the USB core and the xHC of the device reset. In hub_port_finish_reset, unconditionally clear the connect status change (CSC) bit for USB 3.0 hubs when the port reset is done. If we had to issue multiple warm resets for a device, that bit may have been set if the device went into SS.Inactive and then was successfully warm reset. Signed-off-by:
-
Sarah Sharp authored
[This is upstream commit 2d4fa940. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5e "USB: Handle warm reset failure on empty port."] The next patch will refactor the hub port code to rip out the recursive call to hub_port_reset on a failed hot reset. In preparation for that, make sure all code paths can deal with being called with a NULL udev. The usb_device will not be valid if warm reset was issued because a port transitioned to the Inactive or Compliance Mode on a device connect. This patch should have no effect on current behavior. Signed-off-by:
-
Sarah Sharp authored
[This is upstream commit 0fe51aa5. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5e "USB: Handle warm reset failure on empty port."] The EHCI host controller needs to prevent EHCI initialization when the UHCI or OHCI companion controller is in the middle of a port reset. It uses ehci_cf_port_reset_rwsem to do this. USB 3.0 hubs can't be under an EHCI host controller, so it makes no sense to down the semaphore for USB 3.0 hubs. It also makes the warm port reset code more complex. Don't down ehci_cf_port_reset_rwsem for USB 3.0 hubs. Signed-off-by:
-
Matthew Garrett authored
commit 68d92986 upstream. UEFI variables are typically stored in flash. For various reasons, avaiable space is typically not reclaimed immediately upon the deletion of a variable - instead, the system will garbage collect during initialisation after a reboot. Some systems appear to handle this garbage collection extremely poorly, failing if more than 50% of the system flash is in use. This can result in the machine refusing to boot. The safest thing to do for the moment is to forbid writes if they'd end up using more than half of the storage space. We can make this more finegrained later if we come up with a method for identifying the broken machines. Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Seiji Aguchi authored
commit 81fa4e58 upstream. [Problem] There is a scenario which efi_pstore fails to log messages in a panic case. - CPUA holds an efi_var->lock in either efivarfs parts or efi_pstore with interrupt enabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA stops with holding the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) but it returns without logging messages. [Patch Description] This patch disables an external interruption while holding efivars->lock as follows. In efi_pstore_write() and get_var_data(), spin_lock/spin_unlock is replaced by spin_lock_irqsave/spin_unlock_irqrestore because they may be called in an interrupt context. In other functions, they are replaced by spin_lock_irq/spin_unlock_irq. because they are all called from a process context. By applying this patch, we can avoid the problem above with a following senario. - CPUA holds an efi_var->lock with interrupt disabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA receives the IPI after releasing the lock because it is disabling interrupt while holding the lock. - CPUB waits for one sec until CPUA releases the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) And it can hold the lock successfully. Signed-off-by:
Seiji Aguchi <seiji.aguchi@hds.com> Acked-by:
Mike Waychison <mikew@google.com> Acked-by:
Tony Luck <tony.luck@intel.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Steven Rostedt authored
commit db05021d upstream. The prompt to enable DYNAMIC_FTRACE (the ability to nop and enable function tracing at run time) had a confusing statement: "enable/disable ftrace tracepoints dynamically" This was written before tracepoints were added to the kernel, but now that tracepoints have been added, this is very confusing and has confused people enough to give wrong information during presentations. Not only that, I looked at the help text, and it still references that dreaded daemon that use to wake up once a second to update the nop locations and brick NICs, that hasn't been around for over five years. Time to bring the text up to the current decade. Reported-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Michael Ellerman authored
commit 25e13814 upstream. In commit 466921c5 we added a hack to set the paca data_offset to zero so that per-cpu accesses would work on the boot cpu prior to per-cpu areas being setup. This fixed a problem with lockdep touching per-cpu areas very early in boot. However if we combine CONFIG_LOCK_STAT=y with any of the PPC_EARLY_DEBUG options, we can hit the same problem in udbg_early_init(). To avoid that we need to set the data_offset of the boot_paca also. So factor out the fixup logic and call it for both the boot_paca, and "the paca of the boot cpu". Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Tested-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jason Cooper authored
commit 93fff4ce upstream. When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by:
Simon Baatz <gmbnomis@gmail.com> Tested-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Fabio Estevam authored
commit f6c49da9 upstream. commit 09f6ffde (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST. Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Andrew Lunn authored
commit de88747f upstream. The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andrew Lunn authored
commit 89c58c19 upstream. The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by:
-
Al Viro authored
commit a930d879 upstream. If you open a pipe for neither read nor write, the pipe code will not add any usage counters to the pipe, causing the 'struct pipe_inode_info" to be potentially released early. That doesn't normally matter, since you cannot actually use the pipe, but the pipe release code - particularly fasync handling - still expects the actual pipe infrastructure to all be there. And rather than adding NULL pointer checks, let's just disallow this case, the same way we already do for the named pipe ("fifo") case. This is ancient going back to pre-2.4 days, and until trinity, nobody naver noticed. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Mathieu Desnoyers authored
commit 8aec0f5d upstream. Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to compat_process_vm_rw() shows that the compatibility code requires an explicit "access_ok()" check before calling compat_rw_copy_check_uvector(). The same difference seems to appear when we compare fs/read_write.c:do_readv_writev() to fs/compat.c:compat_do_readv_writev(). This subtle difference between the compat and non-compat requirements should probably be debated, as it seems to be error-prone. In fact, there are two others sites that use this function in the Linux kernel, and they both seem to get it wrong: Now shifting our attention to fs/aio.c, we see that aio_setup_iocb() also ends up calling compat_rw_copy_check_uvector() through aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to be missing. Same situation for security/keys/compat.c:compat_keyctl_instantiate_key_iov(). I propose that we add the access_ok() check directly into compat_rw_copy_check_uvector(), so callers don't have to worry about it, and it therefore makes the compat call code similar to its non-compat counterpart. Place the access_ok() check in the same location where copy_from_user() can trigger a -EFAULT error in the non-compat code, so the ABI behaviors are alike on both compat and non-compat. While we are here, fix compat_do_readv_writev() so it checks for compat_rw_copy_check_uvector() negative return values. And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error handling. Acked-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
David Howells authored
commit 0da9dfdd upstream. This fixes CVE-2013-1792. There is a race in install_user_keyrings() that can cause a NULL pointer dereference when called concurrently for the same user if the uid and uid-session keyrings are not yet created. It might be possible for an unprivileged user to trigger this by calling keyctl() from userspace in parallel immediately after logging in. Assume that we have two threads both executing lookup_user_key(), both looking for KEY_SPEC_USER_SESSION_KEYRING. THREAD A THREAD B =============================== =============================== ==>call install_user_keyrings(); if (!cred->user->session_keyring) ==>call install_user_keyrings() ... user->uid_keyring = uid_keyring; if (user->uid_keyring) return 0; <== key = cred->user->session_keyring [== NULL] user->session_keyring = session_keyring; atomic_inc(&key->usage); [oops] At the point thread A dereferences cred->user->session_keyring, thread B hasn't updated user->session_keyring yet, but thread A assumes it is populated because install_user_keyrings() returned ok. The race window is really small but can be exploited if, for example, thread B is interrupted or preempted after initializing uid_keyring, but before doing setting session_keyring. This couldn't be reproduced on a stock kernel. However, after placing systemtap probe on 'user->session_keyring = session_keyring;' that introduced some delay, the kernel could be crashed reliably. Fix this by checking both pointers before deciding whether to return. Alternatively, the test could be done away with entirely as it is checked inside the mutex - but since the mutex is global, that may not be the best way. Signed-off-by:
David Howells <dhowells@redhat.com> Reported-by:
Mateusz Guzik <mguzik@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Ming Lei authored
commit 76437214 upstream. The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Signed-off-by:
Ming Lei <ming.lei@canonical.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
Lee, Chun-Yi authored
commit f24c96ea upstream. Fengguang Wu run kernel build test to platform-drivers-x86/linux-next git tree on x86_64 architecture and found a warning that was introduced by 727651bf738b6b917335025d09323d0962eda114 commit: drivers/platform/x86/acer-wmi.c: In function âWMID_set_capabilitiesâ: drivers/platform/x86/acer-wmi.c:1211: warning: âdevicesâ may be used uninitialized in this function This patch fixes the above warning message. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Mathias Krause authored
commit 9a5467bf upstream. Three errors resulting in kernel memory disclosure: 1/ The structures used for the netlink based crypto algorithm report API are located on the stack. As snprintf() does not fill the remainder of the buffer with null bytes, those stack bytes will be disclosed to users of the API. Switch to strncpy() to fix this. 2/ crypto_report_one() does not initialize all field of struct crypto_user_alg. Fix this to fix the heap info leak. 3/ For the module name we should copy only as many bytes as module_name() returns -- not as much as the destination buffer could hold. But the current code does not and therefore copies random data from behind the end of the module name, as the module name is always shorter than CRYPTO_MAX_ALG_NAME. Also switch to use strncpy() to copy the algorithm's name and driver_name. They are strings, after all. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Wei WANG authored
commit c3481955 upstream. Realtek card reader supports both SD and MS card. According to the settings of rtsx MFD driver, SD host will be probed before MS host. If we boot/reboot Linux with SD card inserted, the resetting flow of SD card will succeed, and the following resetting flow of MS is sure to fail. Then MS upper-level driver will ask rtsx driver to turn power off. This request leads to the result that the following SD commands fail and SD card can't be accessed again. In this commit, Realtek's SD and MS host driver will check whether the card that upper driver requesting is the one existing in the slot. If not, Realtek's host driver will refuse the operation to make sure the exlusive accessing at the same time. Signed-off-by:
Wei WANG <wei_wang@realsil.com.cn> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Cc: Tim Gardner <rtg.canonical@gmail.com> Signed-off-by:
-
Wei WANG authored
commit 504decc0 upstream. 1. Schedule card detect work at the end of the ISR 2. Callback function ops->cd_deglitch may delay for a period of time. It is not proper to call this callback when local irq disabled. 3. Card detect flow can't be executed in parallel with other card reader operations, so it's better to be protected by mutex. Signed-off-by:
-
Peter Hurley authored
commit 3d2a80a2 upstream. The physical memory fixmapped for the pvclock clock_gettime vsyscall was allocated, and thus is not a kernel symbol. __pa() is the proper method to use in this case. Fixes the crash below when booting a next-20130204+ smp guest on a 3.8-rc5+ KVM host. [ 0.666410] udevd[97]: starting version 175 [ 0.674043] udevd[97]: udevd:[97]: segfault at ffffffffff5fd020 ip 00007fff069e277f sp 00007fff068c9ef8 error d Acked-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Josef Bacik authored
commit 4a7d0f68 upstream. I noticed we were getting lots of warnings with xfstest 83 because we have reservations outstanding. This is because we moved the orphan add outside of the truncate, but we don't actually cleanup our reservation if something fails. This fixes the problem and I no longer see warnings. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Josef Bacik authored
commit 925396ec upstream. Dave sent me a panic where we were doing the orphan cleanup and panic'ed trying to release our reservation from the orphan block rsv. The reason for this is because our orphan block rsv had been free'd out from underneath us because the transaction commit found that there were no orphan inodes according to its count and decided to free it. This is incorrect so make sure we inc the orphan inodes count so the accounting is all done properly. This would also cause the warning in the orphan commit code normally if you had any orphans to cleanup as they would only decrement the orphan count so you'd get a negative orphan count which could cause problems during runtime. Thanks, Signed-off-by:
-
Benjamin Tissoires authored
commit dcd9006b upstream. hid_output_raw_report() makes a direct call to usb_control_msg(). However, some USB3 boards have shown that the usb device is not ready during the .probe(). This blocks the entire usb device, and the paired mice, keyboards are not functional. The dmesg output is the following: [ 11.912287] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 11.912537] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32 [ 11.912636] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32 Relying on the scheduled call to usbhid_submit_report() fixes the problem. related bugs: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072082 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1039143 https://bugzilla.redhat.com/show_bug.cgi?id=840391 https://bugzilla.kernel.org/show_bug.cgi?id=49781Reported-and-tested-by:
Bob Bowles <bobjohnbowles@gmail.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Marcelo Tosatti authored
commit ed55705d upstream. To match whats mapped via vsyscalls to userspace. Reported-by:
-
Eric W. Biederman authored
commit ba0e3427 upstream. Dave Jones <davej@redhat.com> writes: > Just hit this on Linus' current tree. > > [ 89.621770] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 > [ 89.623111] IP: [<ffffffff810784b0>] commit_creds+0x250/0x2f0 > [ 89.624062] PGD 122bfd067 PUD 122bfe067 PMD 0 > [ 89.624901] Oops: 0000 [#1] PREEMPT SMP > [ 89.625678] Modules linked in: caif_socket caif netrom bridge hidp 8021q garp stp mrp rose llc2 af_rxrpc phonet af_key binfmt_misc bnep l2tp_ppp can_bcm l2tp_core pppoe pppox can_raw scsi_transport_iscsi ppp_generic slhc nfnetlink can ipt_ULOG ax25 decnet irda nfc rds x25 crc_ccitt appletalk atm ipx p8023 psnap p8022 llc lockd sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack ip6table_filter ip6_tables btusb bluetooth snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm vhost_net snd_page_alloc snd_timer tun macvtap usb_debug snd rfkill microcode macvlan edac_core pcspkr serio_raw kvm_amd soundcore kvm r8169 mii > [ 89.637846] CPU 2 > [ 89.638175] Pid: 782, comm: trinity-main Not tainted 3.8.0+ #63 Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H > [ 89.639850] RIP: 0010:[<ffffffff810784b0>] [<ffffffff810784b0>] commit_creds+0x250/0x2f0 > [ 89.641161] RSP: 0018:ffff880115657eb8 EFLAGS: 00010207 > [ 89.641984] RAX: 00000000000003e8 RBX: ffff88012688b000 RCX: 0000000000000000 > [ 89.643069] RDX: 0000000000000000 RSI: ffffffff81c32960 RDI: ffff880105839600 > [ 89.644167] RBP: ffff880115657ed8 R08: 0000000000000000 R09: 0000000000000000 > [ 89.645254] R10: 0000000000000001 R11: 0000000000000246 R12: ffff880105839600 > [ 89.646340] R13: ffff88011beea490 R14: ffff88011beea490 R15: 0000000000000000 > [ 89.647431] FS: 00007f3ac063b740(0000) GS:ffff88012b200000(0000) knlGS:0000000000000000 > [ 89.648660] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 89.649548] CR2: 00000000000000c8 CR3: 0000000122bfc000 CR4: 00000000000007e0 > [ 89.650635] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 89.651723] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [ 89.652812] Process trinity-main (pid: 782, threadinfo ffff880115656000, task ffff88011beea490) > [ 89.654128] Stack: > [ 89.654433] 0000000000000000 ffff8801058396a0 ffff880105839600 ffff88011beeaa78 > [ 89.655769] ffff880115657ef8 ffffffff812c7d9b ffffffff82079be0 0000000000000000 > [ 89.657073] ffff880115657f28 ffffffff8106c665 0000000000000002 ffff880115657f58 > [ 89.658399] Call Trace: > [ 89.658822] [<ffffffff812c7d9b>] key_change_session_keyring+0xfb/0x140 > [ 89.659845] [<ffffffff8106c665>] task_work_run+0xa5/0xd0 > [ 89.660698] [<ffffffff81002911>] do_notify_resume+0x71/0xb0 > [ 89.661581] [<ffffffff816c9a4a>] int_signal+0x12/0x17 > [ 89.662385] Code: 24 90 00 00 00 48 8b b3 90 00 00 00 49 8b 4c 24 40 48 39 f2 75 08 e9 83 00 00 00 48 89 ca 48 81 fa 60 29 c3 81 0f 84 41 fe ff ff <48> 8b 8a c8 00 00 00 48 39 ce 75 e4 3b 82 d0 00 00 00 0f 84 4b > [ 89.667778] RIP [<ffffffff810784b0>] commit_creds+0x250/0x2f0 > [ 89.668733] RSP <ffff880115657eb8> > [ 89.669301] CR2: 00000000000000c8 > > My fastest trinity induced oops yet! > > > Appears to be.. > > if ((set_ns == subset_ns->parent) && > 850: 48 8b 8a c8 00 00 00 mov 0xc8(%rdx),%rcx > > from the inlined cred_cap_issubset By historical accident we have been reading trying to set new->user_ns from new->user_ns. Which is totally silly as new->user_ns is NULL (as is every other field in new except session_keyring at that point). The intent is clearly to copy all of the fields from old to new so copy old->user_ns into into new->user_ns. Reported-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Matt Fleming authored
commit feff5dc4 upstream. Joseph was hitting a failure case when mounting efivarfs which resulted in an incorrect error message, $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory triggered when efivarfs_valid_name() returned -EINVAL. Make sure we pass accurate return values up the stack if efivarfs_fill_super() fails to build inodes for EFI variables. Reported-by:
Joseph Yasi <joe.yasi@gmail.com> Reported-by:
Lingzhu Xiang <lxiang@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Matt Fleming authored
commit 123abd76 upstream. Stricter validation was introduced with commit da27a243 ("efivarfs: guid part of filenames are case-insensitive") and commit 47f531e8 ("efivarfs: Validate filenames much more aggressively"), which is necessary for the guid portion of efivarfs filenames, but we don't need to be so strict with the first part, the variable name. The UEFI specification doesn't impose any constraints on variable names other than they be a NULL-terminated string. The above commits caused a regression that resulted in users seeing the following message, $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory whenever pstore EFI variables were present in the variable store, since their variable names failed to pass the following check, /* GUID should be right after the first '-' */ if (s - 1 != strchr(str, '-')) as a typical pstore filename is of the form, dump-type0-10-1-<guid>. The fix is trivial since the guid portion of the filename is GUID_LEN bytes, we can use (len - GUID_LEN) to ensure the '-' character is where we expect it to be. (The bogus ENOMEM error value will be fixed in a separate patch.) Reported-by:
-
Nithin Sujir authored
commit 84421b99 upstream. Commit f4a46d1f introduced a bug where the ifconfig stats would remain 0 for phylib devices. This is due to tp->link_up flag never becoming true causing tg3_periodic_fetch_stats() to return. The link_up flag was being updated in tg3_test_and_report_link_chg() after setting up the phy. This function however, is not called for phylib devices since the driver does not do the phy setup. This patch moves the link_up flag update into the common tg3_link_report() function that gets called for phylib devices as well for non phylib devices when the link state changes. To avoid updating link_up twice, we replace tg3_carrier_...() calls that are followed by tg3_link_report(), with netif_carrier_...(). We can then remove the unused tg3_carrier_on() function. Reported-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 4e0855df upstream. This patch removes redundant and unbalanced pci_disable_device() from __e1000_shutdown(). pci_clear_master() is enough, device can go into suspended state with elevated enable_cnt. Bug was introduced in commit 23606cf5 ("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35 Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Bruce Allan <bruce.w.allan@intel.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Borislav Petkov <bp@suse.de> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Ben Greear authored
commit 49921859 upstream. Some mlme work structs are not cancelled on disassociation nor interface deletion, which leads to them running after the memory has been freed There is not a clean way to cancel these in the disassociation logic because they must be canceled outside of the ifmgd->mtx lock, so just cancel them in mgd_stop logic that tears down the station. This fixes the crashes we see in 3.7.9+. The crash stack trace itself isn't so helpful, but this warning gives more useful info: WARNING: at /home/greearb/git/linux-3.7.dev.y/lib/debugobjects.c:261 debug_print_object+0x7c/0x8d() ODEBUG: free active (active state 0) object type: work_struct hint: ieee80211_sta_monitor_work+0x0/0x14 [mac80211] Modules linked in: [...] Pid: 14743, comm: iw Tainted: G C O 3.7.9+ #11 Call Trace: [<ffffffff81087ef8>] warn_slowpath_common+0x80/0x98 [<ffffffff81087fa4>] warn_slowpath_fmt+0x41/0x43 [<ffffffff812a2608>] debug_print_object+0x7c/0x8d [<ffffffff812a2bca>] debug_check_no_obj_freed+0x95/0x1c3 [<ffffffff8114cc69>] slab_free_hook+0x70/0x79 [<ffffffff8114ea3e>] kfree+0x62/0xb7 [<ffffffff8149f465>] netdev_release+0x39/0x3e [<ffffffff8136ad67>] device_release+0x52/0x8a [<ffffffff812937db>] kobject_release+0x121/0x158 [<ffffffff81293612>] kobject_put+0x4c/0x50 [<ffffffff8148f0d7>] netdev_run_todo+0x25c/0x27e Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 067785c4 upstream. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Hillf Danton authored
commit 5ca39575 upstream. n->end is accessed in sp_insert(). Thus it should be update before calling sp_insert(). This mistake may make kernel panic. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
-
Theodore Ts'o authored
commit b9809552 upstream. Commit 61337054 introduced a circular lock dependency because posix_cpu_timers_exit() is called by release_task(), which is holding a writer lock on tasklist_lock, and this can cause a deadlock since kill_fasync() gets called with nonblocking_pool.lock taken. There's no reason why kill_fasync() needs to be taken while the random pool is locked, so move it out to fix this locking dependency. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reported-by:
Russ Dill <Russ.Dill@gmail.com> Signed-off-by:
-
