Merge series "ASoC: SOF: Intel: fix to dsp state dump trace levels" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Small series that addresses a problem where DSP status dump
for a failure case, ends up being printed as as debug print. This
is important information for any bug report. While at it, the series
contains a few cleanups to related code.

Ranjani Sridharan (3):
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err

 sound/soc/sof/debug.c            |  2 +-
 sound/soc/sof/intel/byt.c        |  2 +-
 sound/soc/sof/intel/hda-loader.c | 19 +++++++++++++------
 sound/soc/sof/intel/hda.c        | 10 ++++------
 sound/soc/sof/loader.c           |  4 ++--
 sound/soc/sof/ops.c              |  2 +-
 sound/soc/sof/sof-priv.h         | 13 ++++++++-----
 7 files changed, 30 insertions(+), 22 deletions(-)

--
2.29.2

Merge series "ASoC: rt1015p: delay 300ms for waiting calibration" from Tzung-Bi Shih <tzungbi@google.com>:

The 1st patch moves SDB control from DAI ops trigger to DAPM event
(per review comments in v1).

The 2nd patch adds the 300ms delay for waiting calibration.

Changes from v2:
- Use gpiod_set_value_cansleep() instead of gpiod_set_value().
(https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-2-tzungbi@google.com/)
- Assuming the calibration state gets lost after system suspend.
(https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-3-tzungbi@google.com/)

Changes from v1:
(https://patchwork.kernel.org/project/alsa-devel/patch/20201209033742.3825973-1-tzungbi@google.com/)
- Move the delay from trigger to DAPM event.

Tzung-Bi Shih (2):
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration

 sound/soc/codecs/rt1015p.c | 69 ++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 37 deletions(-)

--
2.29.2.684.gfbc64c5ab5-goog

Add missing parameters to avoid W=1 error
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211102255.3189589-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This has a goto followed by an unreachable return statement.  The goto
is correct because it cleans up so the current runtime behavior is fine.
Let's delete the unreachable return statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9NFg3KVm16Gx6Io@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

Adds PM ops to machine drivers so that they notify components in the
sound card when system suspend.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051334.2313899-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dan reported that smatch reports wrong size check and after analysis it
is confirmed that we are comparing wrong value: pointer size instead of
array size. However the check itself is problematic as in UAPI header
there are two fields:

struct snd_soc_tplg_enum_control {
    (...)
    char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
    __le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4];

the texts field is for names and the values one for values assigned to
those named fields, after analysis it becomes clear that there is quite
a lot overhead values than we may possibly name. So instead of changing
check to ARRAY_SIZE(ec->values), as it was first suggested, use
hardcoded value of SND_SOC_TPLG_NUM_TEXTS.

Link: https://lore.kernel.org/alsa-devel/X9B0eDcKy+9B6kZl@mwanda/Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When we parse "values" we perform check if there is correct number of
them. However similar check is missing in case of "texts", add it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.

So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SOF_DBG_* macros are used for dual purposes right now, for the
sof_core_debug module parameter and for the dbg_dump() ops. So, separate
these two types of flags into different types to avoid confusion.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the duplicate status dump in case DSP init fails. The core will
be powered down in this case and the status dump will be invalid anyway.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT1015p needs 300ms delay after SDB pulling high for internal
calibration during the power on sequence.

Delays 300ms right before data sends out to avoid data truncated.

Assuming the calibration state gets lost after system suspend.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Moves SDB control from DAI ops trigger to DAPM.  As long as BCLK
and LRCLK are ready, SDB can be toggled earlier.

Changes from using gpiod_set_value() to gpiod_set_value_cansleep()
because it executes in non-atomic context.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document the missing properties which are currently required for
Tegra186/Tegra194 DT files.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1607006202-4078-3-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert Tegra HDA doc to YAML format.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1607006202-4078-2-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add devicetree documentation for simple audio multiplexers
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-1-alexandre.belloni@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: soc-pcm: trigger cleanup" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

These are focusing to trigger function,
which can be cleanup, tidyup.

Kuninori Morimoto (2):
  ASoC: soc-pcm: remove dpcm_do_trigger()
  ASoC: soc-pcm: care trigger rollback

 include/sound/soc-component.h |  3 +-
 include/sound/soc-dai.h       |  4 +-
 include/sound/soc-link.h      |  3 +-
 include/sound/soc.h           |  1 +
 sound/soc/soc-component.c     | 45 ++++++++++++++++++----
 sound/soc/soc-dai.c           | 44 +++++++++++++++++----
 sound/soc/soc-link.c          | 30 ++++++++++++++-
 sound/soc/soc-pcm.c           | 72 ++++++++++++++++++++---------------
 8 files changed, 152 insertions(+), 50 deletions(-)

--
2.25.1

In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>

There is simply no reason to do that.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-4-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>

When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>

In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>

Use regmap_{set,clear}_bits instead of regmap_update_bits, when
applicable.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-1-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>

soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.

	static int soc_pcm_trigger(...)
	{
		...
		switch (cmd) {
		case SNDRV_PCM_TRIGGER_START:
		case SNDRV_PCM_TRIGGER_RESUME:
		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
			ret = snd_soc_link_trigger(substream, cmd);
			if (ret < 0)
				break;

(*)			ret = snd_soc_pcm_component_trigger(substream, cmd);
			if (ret < 0)
				break;

			ret = snd_soc_pcm_dai_trigger(substream, cmd);
			break;
		case SNDRV_PCM_TRIGGER_STOP:
		case SNDRV_PCM_TRIGGER_SUSPEND:
		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
			ret = snd_soc_pcm_dai_trigger(substream, cmd);
			if (ret < 0)
				break;

			ret = snd_soc_pcm_component_trigger(substream, cmd);
			if (ret < 0)
				break;

			ret = snd_soc_link_trigger(substream, cmd);
			break;
		}
		...
	}

For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.

This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.

Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).

	int dpcm_be_dai_trigger(...)
	{
		for_each_dpcm_be(fe, stream, dpcm) {
(B)			...
			switch (cmd) {
			case SNDRV_PCM_TRIGGER_START:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_RESUME:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_STOP:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_SUSPEND:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			}
		}
	}

But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.

	static int dpcm_do_trigger(...)
	{
		int ret;

(A)		dev_dbg(...);

		ret = soc_pcm_trigger(substream, cmd);
		if (ret < 0)
(C)			dev_err(...);

		return ret;
	}

This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: cht_bsw_nau8824: 2 fixes for usage with sof-audio-acpi" from Hans de Goede <hdegoede@redhat.com>:

Hi All,

Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.

Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.

I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.

These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.

Regards,

Hans

cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.

Fixes: bb24a31e ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture".  Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
 debugfs: File 'Playback' in directory 'dapm' already present!
 debugfs: File 'Capture' in directory 'dapm' already present!

Fix it by renaming the secondary streams to unique names.

Fixes: a497a436 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Imx-hdmi is a new added machine driver for supporting hdmi devices
on i.MX platforms. There is HDMI IP or external HDMI modules connect
with SAI or AUD2HTX interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1607251319-5821-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.

Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.

When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.

Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.

The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;

This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.

An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.

When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.

The new sequence would be:
soc_pcm_prepare()
    -> SND_SOC_DAPM_STREAM_START

soc_pcm_hw_free()
    -> soc_pcm_hw_free()
	-> SND_SOC_DAPM_STREAM_STOP

dpcm_fe_dai_shutdown()
    -> SND_SOC_DAPM_STREAM_STOP

Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.

Fixes: a27b421f ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The previous fix left another warning in randconfig builds:

WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && COMMON_CLK [=n]
  Selected by [y]:
  - SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y]

Add one more dependency for this one.

Fixes: 2bc8831b ("ASoC: qcom: fix SDM845 & QDSP6 dependencies more")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201203231443.1483763-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When CONFIG_PM is disabled, we get a warning for unused functions:

sound/soc/fsl/fsl_aud2htx.c:261:12: error: unused function 'fsl_aud2htx_runtime_suspend' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_suspend(struct device *dev)
sound/soc/fsl/fsl_aud2htx.c:271:12: error: unused function 'fsl_aud2htx_runtime_resume' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_resume(struct device *dev)

Mark these as __maybe_unused to avoid the warning without adding
an #ifdef.

Fixes: 8a24c834 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201203222900.1042578-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds the driver data for two rt1011 speaker amplifiers on
SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201203154010.29464-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Compile-testing this driver on an older platform without CONFIG_COMMON_CLK fails with

ERROR: modpost: "clk_set_min_rate" [sound/soc/atmel/snd-soc-mchp-spdifrx.ko] undefined!

Make this is a strict dependency.

Fixes: ef265c55 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201203223815.1353451-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>