Skip to content

L
linux
Switch branch/tag
  1. 05 Sep, 2024 1 commit
  3. 04 Sep, 2024 5 commits
    • Jonas Gorski's avatar
      net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN · bee2ef94
      Jonas Gorski authored 
      When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().

If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.

If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.

Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.

Fixes: 710ae728 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: default avatarJonas Gorski <jonas.gorski@bisdn.de>
Acked-by: default avatarNikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.deSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      bee2ef94
    • Hayes Wang's avatar
      r8152: fix the firmware doesn't work · 8487b4af
      Hayes Wang authored 
      generic_ocp_write() asks the parameter "size" must be 4 bytes align.
Therefore, write the bp would fail, if the mac->bp_num is odd. Align the
size to 4 for fixing it. The way may write an extra bp, but the
rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose
index is more than mac->bp_num. That is, there is no influence for the
firmware.

Besides, I check the return value of generic_ocp_write() to make sure
everything is correct.

Fixes: e5c266a6 ("r8152: set bp in bulk")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8487b4af
    • Kuniyuki Iwashima's avatar
      fou: Fix null-ptr-deref in GRO. · 7e419693
      Kuniyuki Iwashima authored 
      We observed a null-ptr-deref in fou_gro_receive() while shutting down
a host.  [0]

The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol
in struct fou.

When fou_release() is called due to netns dismantle or explicit tunnel
teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data.
Then, the tunnel socket is destroyed after a single RCU grace period.

So, in-flight udp4_gro_receive() could find the socket and execute the
FOU GRO handler, where sk->sk_user_data could be NULL.

Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL
checks in FOU GRO handlers.

[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
 PF: supervisor read access in kernel mode
 PF: error_code(0x0000) - not-present page
PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0
SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1
Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou]
Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42
RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010
RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08
RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002
R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400
R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0
FS:  0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
 ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
 ? no_context (arch/x86/mm/fault.c:752)
 ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483)
 ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571)
 ? fou_gro_receive (net/ipv4/fou.c:233) [fou]
 udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559)
 udp4_gro_receive (net/ipv4/udp_offload.c:604)
 inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7))
 dev_gro_receive (net/core/dev.c:6035 (discriminator 4))
 napi_gro_receive (net/core/dev.c:6170)
 ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena]
 ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena]
 napi_poll (net/core/dev.c:6847)
 net_rx_action (net/core/dev.c:6917)
 __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299)
 asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809)
</IRQ>
 do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77)
 irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435)
 common_interrupt (arch/x86/kernel/irq.c:239)
 asm_common_interrupt (arch/x86/include/asm/idtentry.h:626)
RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575)
Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00
RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900
RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64
RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044
R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001
R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000
 ? sched_clock_cpu (kernel/sched/clock.c:371)
 acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3))
 cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237)
 cpuidle_enter (drivers/cpuidle/cpuidle.c:353)
 cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239)
 do_idle (kernel/sched/idle.c:302)
 cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1))
 start_kernel (init/main.c:1048)
 secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310)
Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel
CR2: 0000000000000008

Fixes: d92283e3 ("fou: change to use UDP socket GRO")
Reported-by: default avatarAlphonse Kurian <alkurian@amazon.com>
Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7e419693
    • Guillaume Nault's avatar
      bareudp: Fix device stats updates. · 4963d234
      Guillaume Nault authored 
      Bareudp devices update their stats concurrently.
Therefore they need proper atomic increments.

Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4963d234
    • Souradeep Chakrabarti's avatar
      net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup · b6ecc662
      Souradeep Chakrabarti authored 
      Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.

? page_fault_oops+0x136/0x2b0
  ? page_counter_cancel+0x2e/0x80
  ? do_user_addr_fault+0x2f2/0x640
  ? refill_obj_stock+0xc4/0x110
  ? exc_page_fault+0x71/0x160
  ? asm_exc_page_fault+0x27/0x30
  ? __mmdrop+0x10/0x180
  ? __mmdrop+0xec/0x180
  ? hrtimer_active+0xd/0x50
  hrtimer_try_to_cancel+0x2c/0xf0
  hrtimer_cancel+0x15/0x30
  napi_disable+0x65/0x90
  mana_destroy_rxq+0x4c/0x2f0
  mana_create_rxq.isra.0+0x56c/0x6d0
  ? mana_uncfg_vport+0x50/0x50
  mana_alloc_queues+0x21b/0x320
  ? skb_dequeue+0x5f/0x80

Cc: stable@vger.kernel.org
Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: default avatarSouradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: default avatarShradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b6ecc662
  5. 03 Sep, 2024 15 commits
  7. 02 Sep, 2024 2 commits
  9. 01 Sep, 2024 3 commits
  11. 30 Aug, 2024 9 commits
    • Luiz Augusto von Dentz's avatar
      Bluetooth: MGMT: Ignore keys being loaded with invalid type · 1e9683c9
      Luiz Augusto von Dentz authored 
      Due to 59b047bc there could be keys stored
with the wrong address type so this attempt to detect it and ignore them
instead of just failing to load all keys.

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      1e9683c9
    • Luiz Augusto von Dentz's avatar
      Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" · 532f8bcd
      Luiz Augusto von Dentz authored 
      This reverts commit 59b047bc which
breaks compatibility with commands like:

bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74  {0x0001} [hci0]
        Keys: 2
        BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
        Key type: Authenticated key from P-256 (0x03)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 6ed96089bd9765be2f2c971b0b95f624
        LE Address: D7:2A:DE:1E:73:A2 (Static)
        Key type: Unauthenticated key from P-256 (0x02)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3                {0x0001} [hci0]
      Load Long Term Keys (0x0013)
        Status: Invalid Parameters (0x0d)

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      532f8bcd
    • Luiz Augusto von Dentz's avatar
      Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT · 227a0cdf
      Luiz Augusto von Dentz authored 
      MGMT_OP_DISCONNECT can be called while mgmt_device_connected has not
been called yet, which will cause the connection procedure to be
aborted, so mgmt_device_disconnected shall still respond with command
complete to MGMT_OP_DISCONNECT and just not emit
MGMT_EV_DEVICE_DISCONNECTED since MGMT_EV_DEVICE_CONNECTED was never
sent.

To fix this MGMT_OP_DISCONNECT is changed to work similarly to other
command which do use hci_cmd_sync_queue and then use hci_conn_abort to
disconnect and returns the result, in order for hci_conn_abort to be
used from hci_cmd_sync context it now uses hci_cmd_sync_run_once.

Link: https://github.com/bluez/bluez/issues/932
Fixes: 12d4a3b2 ("Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      227a0cdf
    • Luiz Augusto von Dentz's avatar
      Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once · c898f6d7
      Luiz Augusto von Dentz authored 
      This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      c898f6d7
    • Douglas Anderson's avatar
      Bluetooth: qca: If memdump doesn't work, re-enable IBS · 8ae22de9
      Douglas Anderson authored 
      On systems in the field, we are seeing this sometimes in the kernel logs:
  Bluetooth: qca_controller_memdump() hci0: hci_devcd_init Return:-95

This means that _something_ decided that it wanted to get a memdump
but then hci_devcd_init() returned -EOPNOTSUPP (AKA -95).

The cleanup code in qca_controller_memdump() when we get back an error
from hci_devcd_init() undoes most things but forgets to clear
QCA_IBS_DISABLED. One side effect of this is that, during the next
suspend, qca_suspend() will always get a timeout.

Let's fix it so that we clear the bit.

Fixes: 06d3fdfc ("Bluetooth: hci_qca: Add qcom devcoredump support")
Reviewed-by: default avatarGuenter Roeck <groeck@chromium.org>
Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      8ae22de9
    • Martin Jocic's avatar
      can: kvaser_pciefd: Use a single write when releasing RX buffers · dd885d90
      Martin Jocic authored 
      Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K
buffers for incoming messages shared by all (currently up to eight)
channels. While the driver processes messages in one buffer, new
incoming messages are stored in the other and so on.

The design of KCAN is such that a buffer must be fully read and then
released. Releasing a buffer will make the FPGA switch buffers. If the
other buffer contains at least one incoming message the FPGA will also
instantly issue a new interrupt, if not the interrupt will be issued
after receiving the first new message.

With IRQx interrupts, it takes a little time for the interrupt to
happen, enough for any previous ISR call to do it's business and
return, but MSI interrupts are way faster so this time is reduced to
almost nothing.

So with MSI, releasing the buffer HAS to be the very last action of
the ISR before returning, otherwise the new interrupt might be
"masked" by the kernel because the previous ISR call hasn't returned.
And the interrupts are edge-triggered so we cannot loose one, or the
ping-pong reading process will stop.

This is why this patch modifies the driver to use a single write to
the SRB_CMD register before returning.
Signed-off-by: default avatarMartin Jocic <martin.jocic@kvaser.com>
Reviewed-by: default avatarVincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240830153113.2081440-1-martin.jocic@kvaser.com
Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      dd885d90
    • Cong Wang's avatar
      tcp_bpf: fix return value of tcp_bpf_sendmsg() · fe1910f9
      Cong Wang authored 
      When we cork messages in psock->cork, the last message triggers the
flushing will result in sending a sk_msg larger than the current
message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes
negative at least in the following case:

468         case __SK_DROP:
469         default:
470                 sk_msg_free_partial(sk, msg, tosend);
471                 sk_msg_apply_bytes(psock, tosend);
472                 *copied -= (tosend + delta); // <==== HERE
473                 return -EACCES;

Therefore, it could lead to the following BUG with a proper value of
'copied' (thanks to syzbot). We should not use negative 'copied' as a
return value here.

  ------------[ cut here ]------------
  kernel BUG at net/socket.c:733!
  Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b4328 #0
  Hardware name: linux,dummy-virt (DT)
  pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
  pc : sock_sendmsg_nosec net/socket.c:733 [inline]
  pc : sock_sendmsg_nosec net/socket.c:728 [inline]
  pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745
  lr : sock_sendmsg_nosec net/socket.c:730 [inline]
  lr : __sock_sendmsg+0x54/0x60 net/socket.c:745
  sp : ffff800088ea3b30
  x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000
  x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000
  x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90
  x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001
  x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf
  x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
  x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0
  x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000
  x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900
  x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef
  Call trace:
   sock_sendmsg_nosec net/socket.c:733 [inline]
   __sock_sendmsg+0x5c/0x60 net/socket.c:745
   ____sys_sendmsg+0x274/0x2ac net/socket.c:2597
   ___sys_sendmsg+0xac/0x100 net/socket.c:2651
   __sys_sendmsg+0x84/0xe0 net/socket.c:2680
   __do_sys_sendmsg net/socket.c:2689 [inline]
   __se_sys_sendmsg net/socket.c:2687 [inline]
   __arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687
   __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
   invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49
   el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132
   do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151
   el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712
   el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730
   el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598
  Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000)
  ---[ end trace 0000000000000000 ]---

Fixes: 4f738adb ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+58c03971700330ce14d8@syzkaller.appspotmail.com
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: default avatarCong Wang <cong.wang@bytedance.com>
Reviewed-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Acked-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20240821030744.320934-1-xiyou.wangcong@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      fe1910f9
    • Jeongjun Park's avatar
      net/smc: prevent NULL pointer dereference in txopt_get · 98d4435e
      Jeongjun Park authored 
      Since smc_inet6_prot does not initialize ipv6_pinfo_offset, inet6_create()
copies an incorrect address value, sk + 0 (offset), to inet_sk(sk)->pinet6.

In addition, since inet_sk(sk)->pinet6 and smc_sk(sk)->clcsock practically
point to the same address, when smc_create_clcsk() stores the newly
created clcsock in smc_sk(sk)->clcsock, inet_sk(sk)->pinet6 is corrupted
into clcsock. This causes NULL pointer dereference and various other
memory corruptions.

To solve this problem, you need to initialize ipv6_pinfo_offset, add a
smc6_sock structure, and then add ipv6_pinfo as the second member of
the smc_sock structure.
Reported-by: default avatarsyzkaller <syzkaller@googlegroups.com>
Fixes: d25a92cc ("net/smc: Introduce IPPROTO_SMC")
Signed-off-by: default avatarJeongjun Park <aha310510@gmail.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98d4435e
    • Jakub Kicinski's avatar
      Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 1bb3c548
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-08-28 (igb, ice)

This series contains updates to igb and ice drivers.

Daiwei Li restores writing the TSICR (TimeSync Interrupt Cause)
register on 82850 devices to workaround a hardware issue for igb.

Dawid detaches netdev device for reset to avoid ethtool accesses during
reset causing NULL pointer dereferences on ice.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Add netif_device_attach/detach into PF reset flow
  igb: Fix not clearing TimeSync interrupts for 82580
====================

Link: https://patch.msgid.link/20240828225444.645154-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1bb3c548
  13. 29 Aug, 2024 5 commits
    • Jakub Kicinski's avatar
      MAINTAINERS: exclude bluetooth and wireless DT bindings from netdev ML · b57d643a
      Jakub Kicinski authored 
      We exclude wireless drivers from the netdev@ traffic, to delegate
it to linux-wireless@, and avoid overwhelming netdev@.
Bluetooth drivers are implicitly excluded because they live under
drivers/bluetooth, not drivers/net.

In both cases DT bindings sit under Documentation/devicetree/bindings/net/
and aren't excluded. So if a patch series touches DT bindings
netdev@ ends up getting CCed, and these are usually fairly boring
series.
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240828175821.2960423-1-kuba@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b57d643a
    • Linus Torvalds's avatar
      Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 0dd5dd63
      Linus Torvalds authored 
      Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth, wireless and netfilter.

  No known outstanding regressions.

  Current release - regressions:

   - wifi: iwlwifi: fix hibernation

   - eth: ionic: prevent tx_timeout due to frequent doorbell ringing

  Previous releases - regressions:

   - sched: fix sch_fq incorrect behavior for small weights

   - wifi:
      - iwlwifi: take the mutex before running link selection
      - wfx: repair open network AP mode

   - netfilter: restore IP sanity checks for netdev/egress

   - tcp: fix forever orphan socket caused by tcp_abort

   - mptcp: close subflow when receiving TCP+FIN

   - bluetooth: fix random crash seen while removing btnxpuart driver

  Previous releases - always broken:

   - mptcp: more fixes for the in-kernel PM

   - eth: bonding: change ipsec_lock from spin lock to mutex

   - eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response

  Misc:

   - documentation: drop special comment style for net code"

* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  nfc: pn533: Add poll mod list filling check
  mailmap: update entry for Sriram Yagnaraman
  selftests: mptcp: join: check re-re-adding ID 0 signal
  mptcp: pm: ADD_ADDR 0 is not a new address
  selftests: mptcp: join: validate event numbers
  mptcp: avoid duplicated SUB_CLOSED events
  selftests: mptcp: join: check re-re-adding ID 0 endp
  mptcp: pm: fix ID 0 endp usage after multiple re-creations
  mptcp: pm: do not remove already closed subflows
  selftests: mptcp: join: no extra msg if no counter
  selftests: mptcp: join: check re-adding init endp with != id
  mptcp: pm: reset MPC endp ID when re-added
  mptcp: pm: skip connecting to already established sf
  mptcp: pm: send ACK on an active subflow
  selftests: mptcp: join: check removing ID 0 endpoint
  mptcp: pm: fix RM_ADDR ID for the initial subflow
  mptcp: pm: reuse ID 0 after delete and re-add
  net: busy-poll: use ktime_get_ns() instead of local_clock()
  sctp: fix association labeling in the duplicate COOKIE-ECHO case
  mptcp: pr_debug: add missing \n at the end
  ...
      0dd5dd63
    • Aleksandr Mishin's avatar
      nfc: pn533: Add poll mod list filling check · febccb39
      Aleksandr Mishin authored 
      In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.

Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
  nfc_start_poll()
    ->start_poll()
    pn533_start_poll()

Add poll mod list filling check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: dfccd0f5 ("NFC: pn533: Add some polling entropy")
Signed-off-by: default avatarAleksandr Mishin <amishin@t-argos.ru>
Acked-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ruSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      febccb39
    • Paolo Abeni's avatar
      Merge tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf · 0240bceb
      Paolo Abeni authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.

Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.

netfilter pull request 24-08-28

* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
  netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================

Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.orgSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      0240bceb
    • Sriram Yagnaraman's avatar
      mailmap: update entry for Sriram Yagnaraman · 6213dcc7
      Sriram Yagnaraman authored 
      Link my old est.tech address to my active mail address
Signed-off-by: default avatarSriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Reviewed-by: Kurt Kanzenbach's avatarKurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      6213dcc7
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7