- 03 Jan, 2017 40 commits
-
-
Paul Burton authored
Include export.h in the list of generic headers used by the MIPS architecture for use by later patches. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14506/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
When allocating a struct alias_prop, of_alias_scan() only requested that it be aligned on a 4 byte boundary. The struct contains pointers which leads to us attempting 64 bit writes on 64 bit systems, and if the CPU doesn't support unaligned memory accesses then this causes problems - for example on some MIPS64r2 CPUs including the "mips64r2-generic" QEMU emulated CPU it will trigger an address error exception. Fix this by requesting alignment for the struct alias_prop allocation matching that which the compiler expects, using the __alignof__ keyword. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14306/Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Marcin Nowakowski authored
Arch-specific implementation of arch_uprobe_copy_ixol is expected to override the weak implementation in generic code. As currently both implementations are marked as weak, it is up to the linker to chose one. Remove the __weak attribute from MIPS code to make sure the correct version is used. Fixes: 40e084a5 ("MIPS: Add uprobes support.") Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14660/Signed-off-by:
-
John Crispin authored
Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
John Crispin authored
MT7621 has highmem. this was previously not working as the required symbol was not selected in the Kconfig file. Signed-off-by:
-
John Crispin authored
As we dont use the common clock api yet we need to add this stub to allow building drivers that use the API. Signed-off-by:
-
John Crispin authored
There is a typo inside the pinmux setup code. The function is really called utif and not util. This was recently discovered when people were trying to make the UTIF interface work. Signed-off-by:
-
John Crispin authored
The mt7620 has a pin that can be used to generate an external reference clock. The pinmux setup was missing the definition of said pin. This patch adds it. Signed-off-by:
-
John Crispin authored
This patch adds two additional clocks required by the audio interface of the SoCs. Signed-off-by:
-
John Crispin authored
The code does not set the SoC type properly. This went unnoticed until now as the SoC does not share any of the driver code with the other SoCs, until we made the mmc driver work. Signed-off-by:
-
Justin Chen authored
Add cacheinfo support for MIPS architectures. Use information from the cpuinfo_mips struct to populate the cacheinfo struct. This allows an architecture agnostic approach, however this also means if cache information is not properly populated within the cpuinfo_mips struct, there is nothing we can do. (I.E. c-r3k.c) Signed-off-by:
Justin Chen <justin.chen@broadcom.com> Cc: f.fainelli@gmail.com Cc: linux-mips@linux-mips.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/14650/Signed-off-by:
-
Marcin Nowakowski authored
Signed-off-by:
-
Marcin Nowakowski authored
Print details of the new kexec image loaded. Based on the original code from commit 221f2c77 ("arm64/kexec: Add pr_debug output") Signed-off-by:
-
Marcin Nowakowski authored
Do not reserve memory for the crashkernel if the commandline argument points to a wrong location. This can happen if the location is specified wrong or if the same commandline is reused when starting the crashkernel - in the latter case the reserved memory would point to the location from which the crashkernel is executing. Signed-off-by:
-
Marcin Nowakowski authored
When a memory offset is specified through the commandline, add the memory in range PHYS_OFFSET:Y as reserved memory area. Otherwise the bootmem allocator is initialised with low page equal to min_low_pfn = PHYS_OFFSET, and in free_all_bootmem will process pages starting from min_low_pfn instead of PFN(Y). Signed-off-by:
-
Marcin Nowakowski authored
If the DTB is located in the target memory area for the relocated kernel it needs to be relocated as well before kernel relocation takes place. After copying the DTB use the new plat_fdt_relocated() API from the relocated kernel to ensure the relocated kernel updates any information that it may have cached about the location of the DTB. plat_fdt_relocated is declared as a weak symbol so that platforms that do not require it do not need to implement the method. Signed-off-by:
-
Marcin Nowakowski authored
Add plat_fdt_relocated(void*) API to allow the kernel relocation code to update platform's information about the DTB location if the DTB had to be moved due to being placed in a location used by the relocated kernel. Signed-off-by:
-
Marcin Nowakowski authored
early_init_fdt_reserve_self is used to tell the boot memory allocator that a memory is occupied by the DTB, so add it in the MIPS init code to ensure information about the DTB is added to the boot memory array. Signed-off-by:
-
Marcin Nowakowski authored
Current init code initialises bootmem allocator with all of the low memory that it assumes is available, but does not check for reserved memory block, which can lead to corruption of data that may be stored there. Move bootmem's allocation map to a location that does not cross any reserved regions Signed-off-by:
-
Marcin Nowakowski authored
Memories managed through boot_mem_map are generally expected to define non-crossing areas. However, if part of a larger memory block is marked as reserved, it would still be added to bootmem allocator as an available block and could end up being overwritten by the allocator. Prevent this by explicitly marking the memory as reserved it if exists in the range used by bootmem allocator. Signed-off-by:
-
Marcin Nowakowski authored
When KEXEC is enabled but crashkernel details are not passed through the kernel commandline unnecessary resources are requested (start==end==0) Signed-off-by:
-
Marcin Nowakowski authored
MIPS does not currently define ELF_CORE_COPY_REGS macros and as a result the generic implementation is used. The generic version attempts to do directly map (struct pt_regs) into (elf_gregset_t), which isn't correct for MIPS platforms and also triggers a BUG() at runtime in include/linux/elfcore.h:16 (BUG_ON(sizeof(*elfregs) != sizeof(*regs))) [ralf@linux-mips.org: Add semicolons to the macro definitions as I do not apply https://patchwork.linux-mips.org/patch/14588/ for now.] Signed-off-by:
-
Marcin Nowakowski authored
Current register dump methods for MIPS are implemented inside ptrace methods, but there will be other uses in the kernel for them, so keep them separately in process.c and use those definitions for ptrace instead. Signed-off-by:
-
Marcin Nowakowski authored
Kconfig entries are not aligned properly, so remove incorrect whitespace. Signed-off-by:
-
Marcin Nowakowski authored
SMP_DUMP has been added as a new IPI signal when kexec support was added for Cavium Octeon CPUs ('commit 7aa1c8f4 ("MIPS: kdump: Add support")'. However, the new signal doesn't appear to ever have a proper handler added (octeon_message_functions[] array has an empty handler for it), and generic IPI handlers now trigger a BUG() on unhandled signal. As the method is unused remove it completely and replace its only invocation with a smp_call_function(). [ralf@linux-mips.org: Renumber SMP_ASK_C0COUNT to avoid numbering gaps.] Signed-off-by: -
Matt Redfearn authored
arch_mmap_rnd() uses hard-coded limits of 16MB for the randomisation of mmap within 32bit processes and 256MB in 64bit processes. Since v4.4 other arches support tuning this value in /proc/sys/vm/mmap_rnd_bits. Add support for this to MIPS. Set the minimum(default) number of bits randomisation for 32bit to 8 - which with 4k pagesize is unchanged from the current 16MB total randomness. The minimum(default) for 64bit is 12bits, again with 4k pagesize this is the same as the current 256MB. This patch is necessary for MIPS32 to pass the Android CTS tests, with the number of random bits set to 15. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Daniel Cashman <dcashman@android.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14617/Signed-off-by:
-
Hauke Mehrtens authored
This activates the following functionalities: * SMP support (used on xRX200) * PCI support * NAND driver * PHY driver * UART * Watchdog * USB 2.0 controller These driver are driving different IP cores found on the supported SoCs. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
-
Hauke Mehrtens authored
Just generate a configuration based on this default configuration and store it again. This removed some old configuration options. Signed-off-by:
-
Tobias Wolf authored
An empty __dtb_start to __dtb_end section might result in initial_boot_params being null for arch/mips/ralink. This showed that the boot process hangs indefinitely in of_scan_flat_dt(). Signed-off-by:
Tobias Wolf <dev-NTEO@vplace.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14605/Signed-off-by:
-
Tobias Wolf authored
This patch adds fw_passed_dtb to arch/mips/ralink to support CONFIG_MIPS_RAW_APPENDED_DTB. Furthermore it adds a check that __dtb_start is not the same address as __dtb_end. Signed-off-by:
-
Yang Ling authored
The patch adds watchdog support for Loongson1 board. Signed-off-by:
Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14644/Signed-off-by:
-
Yang Ling authored
Move the RTC-related macros to regs-rtc.h. Signed-off-by:
-
Paul Burton authored
The RESTORE_ALL_AND_RET macro is never used. Remove the dead code. Signed-off-by:
-
Paul Burton authored
There's no reason for the pre-r6 instruction emulation code to be limited to uniprocessor kernels. We already emulate atomic memory access instructions in a way that works for SMP systems, and nothing else should be affected. Remove the artificial limitation, allowing pre-r6 instruction emulation to be used with SMP kernels. Signed-off-by:
-
Paul Burton authored
Commit 7c151d3d ("MIPS: Make use of the ERETNC instruction on MIPS R6") began clearing LLBit during context switches, but did so on all systems where it is writable for unclear reasons & did so from a macro with "software_ll_bit" in its name, which is intended to operate on the ll_bit variable used by ll/sc emulation for old CPUs. We do now need to clear LLBit on MIPSr6 systems where we'll use eretnc to return to userland, but we don't need to do so on MIPSr5 systems with a writable LLBit. Move the clear to its own appropriately named macro, do it only for MIPSr6 systems & comment about why. Signed-off-by:
-
Paul Burton authored
The r2_emul_return field in struct thread_info was used in order to take an alternate codepath when returning to userland, which (besides not implementing certain features) effectively used the eretnc instruction in place of eret. The difference is that eretnc doesn't clear LLBit, and therefore doesn't cause a linked load & store sequence to fail due to emulation like eret would. The reason eret would usually be used to clear LLBit is so that after context switching we ensure that a load performed by one task doesn't influence another task. However commit 7c151d3d ("MIPS: Make use of the ERETNC instruction on MIPS R6") which introduced the r2_emul_return field and conditional use of eretnc also for some reason began explicitly clearing LLBit during context switches - despite retaining the use of eret for everything but returns from the pre-r6 instruction emulation code. As LLBit is cleared upon context switches anyway, simplify this by using eretnc unconditionally for MIPSr6 kernels. This allows us to remove the 4 byte r2_emul_return boolean from struct thread_info, simplify the return to user code in entry.S and avoid the overhead of tracking & checking state which we don't need. Signed-off-by:
-
Rahul Bedarkar authored
Add support for Imagination Technologies' Marduk board which is based on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy name and will be there for decades. Documentation for this board can be found on https://docs.creatordev.io/ci40/ This patch adds initial support for board with following peripherals: * PWM based heartbeat LED * GPIO based buttons * SPI NOR flash on SPI1 * UART0 and UART1 * SD card * Ethernet * USB * PWM * ADC * I2C Signed-off-by:
Rahul Bedarkar <rahul.bedarkar@imgtec.com> Acked-by:
James Hartley <james.hartley@imgtec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14394/Signed-off-by:
-
Rahul Bedarkar authored
Add support for the base Device Tree for Imagination Technologies' Pistachio SoC. This commit supports the following peripherals: * Clocks * Pinctrl and GPIO * UART * SPI * I2C * PWM * ADC * Watchdog * Ethernet * MMC * DMA engine * Crypto * I2S * SPDIF * Internal DAC * Timer * USB * IR * Interrupt Controller Signed-off-by:
-
Paul Burton authored
On systems with CM3, we must ensure that the L1 & L2 ECC enables are set to the same value. This is presumed by the hardware & cache corruption can occur when it is not the case. Support enabling & disabling the L2 ECC checking on CM3 systems where this is controlled via a GCR, and ensure that it matches the state of L1 ECC checking. Remove I6400 from the switch statement it will no longer hit, and which was incorrect since the L2 ECC enable bit isn't in the CP0 ErrCtl register. Signed-off-by:
-
