- 23 Dec, 2017 21 commits
-
-
Andy Lutomirski authored
Make VSYSCALLs work fully in PTI mode by mapping them properly to the user space visible page tables. [ tglx: Hide unused functions (Patch by Arnd Bergmann) ] Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Andy Lutomirski authored
With PTI enabled, the LDT must be mapped in the usermode tables somewhere. The LDT is per process, i.e. per mm. An earlier approach mapped the LDT on context switch into a fixmap area, but that's a big overhead and exhausted the fixmap space when NR_CPUS got big. Take advantage of the fact that there is an address space hole which provides a completely unused pgd. Use this pgd to manage per-mm LDT mappings. This has a down side: the LDT isn't (currently) randomized, and an attack that can write the LDT is instant root due to call gates (thanks, AMD, for leaving call gates in AMD64 but designing them wrong so they're only useful for exploits). This can be mitigated by making the LDT read-only or randomizing the mapping, either of which is strightforward on top of this patch. This will significantly slow down LDT users, but that shouldn't matter for important workloads -- the LDT is only used by DOSEMU(2), Wine, and very old libc implementations. [ tglx: Cleaned it up. ] Signed-off-by:
-
Andy Lutomirski authored
Shrink vmalloc space from 16384TiB to 12800TiB to enlarge the hole starting at 0xff90000000000000 to be a full PGD entry. A subsequent patch will use this hole for the pagetable isolation LDT alias. Signed-off-by:
-
Hugh Dickins authored
The BTS and PEBS buffers both have their virtual addresses programmed into the hardware. This means that any access to them is performed via the page tables. The times that the hardware accesses these are entirely dependent on how the performance monitoring hardware events are set up. In other words, there is no way for the kernel to tell when the hardware might access these buffers. To avoid perf crashes, place 'debug_store' allocate pages and map them into the cpu_entry_area. The PEBS fixup buffer does not need this treatment. [ tglx: Got rid of the kaiser_add_mapping() complication ] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
The Intel PEBS/BTS debug store is a design trainwreck as it expects virtual addresses which must be visible in any execution context. So it is required to make these mappings visible to user space when kernel page table isolation is active. Provide enough room for the buffer mappings in the cpu_entry_area so the buffers are available in the user space visible page tables. At the point where the kernel side entry area is populated there is no buffer available yet, but the kernel PMD must be populated. To achieve this set the entries for these buffers to non present. Signed-off-by:
-
Andy Lutomirski authored
Map the ESPFIX pages into user space when PTI is enabled. Signed-off-by:
-
Thomas Gleixner authored
Share the entry text PMD of the kernel mapping with the user space mapping. If large pages are enabled this is a single PMD entry and at the point where it is copied into the user page table the RW bit has not been cleared yet. Clear it right away so the user space visible map becomes RX. Signed-off-by:
-
Thomas Gleixner authored
The (irq)entry text must be visible in the user space page tables. To allow simple PMD based sharing, make the entry text PMD aligned. Signed-off-by:
-
Andy Lutomirski authored
Share the cpu entry area so the user space and kernel space page tables have the same P4D page. Signed-off-by:
-
Thomas Gleixner authored
Force the entry through the trampoline only when PTI is active. Otherwise go through the normal entry code. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by:
-
Andy Lutomirski authored
Provide infrastructure to: - find a kernel PMD for a mapping which must be visible to user space for the entry/exit code to work. - walk an address range and share the kernel PMD with it. This reuses a small part of the original KAISER patches to populate the user space page table. [ tglx: Made it universally usable so it can be used for any kind of shared mapping. Add a mechanism to clear specific bits in the user space visible PMD entry. Folded Andys simplifactions ] Originally-by:
-
Dave Hansen authored
In clone_pgd_range() copy the init user PGDs which cover the kernel half of the address space, so a process has all the required kernel mappings visible. [ tglx: Split out from the big kaiser dump and folded Andys simplification ] Signed-off-by:
-
Dave Hansen authored
Kernel page table isolation requires to have two PGDs. One for the kernel, which contains the full kernel mapping plus the user space mapping and one for user space which contains the user space mappings and the minimal set of kernel mappings which are required by the architecture to be able to transition from and to user space. Add the necessary preliminaries. [ tglx: Split out from the big kaiser dump. EFI fixup from Kirill ] Signed-off-by:
-
Dave Hansen authored
With PAGE_TABLE_ISOLATION the user portion of the kernel page tables is poisoned with the NX bit so if the entry code exits with the kernel page tables selected in CR3, userspace crashes. But doing so trips the p4d/pgd_bad() checks. Make sure it does not do that. Signed-off-by:
-
Dave Hansen authored
Add the pagetable helper functions do manage the separate user space page tables. [ tglx: Split out from the big combo kaiser patch. Folded Andys simplification and made it out of line as Boris suggested ] Signed-off-by:
-
Borislav Petkov authored
Keep the "nopti" optional for traditional reasons. [ tglx: Don't allow force on when running on XEN PV and made 'on' printout conditional ] Requested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
Add the initial files for kernel page table isolation, with a minimal init function and the boot time detection for this misfeature. Signed-off-by:
-
Dave Hansen authored
PAGE_TABLE_ISOLATION needs to switch to a different CR3 value when it enters the kernel and switch back when it exits. This essentially needs to be done before leaving assembly code. This is extra challenging because the switching context is tricky: the registers that can be clobbered can vary. It is also hard to store things on the stack because there is an established ABI (ptregs) or the stack is entirely unsafe to use. Establish a set of macros that allow changing to the user and kernel CR3 values. Interactions with SWAPGS: Previous versions of the PAGE_TABLE_ISOLATION code relied on having per-CPU scratch space to save/restore a register that can be used for the CR3 MOV. The %GS register is used to index into our per-CPU space, so SWAPGS *had* to be done before the CR3 switch. That scratch space is gone now, but the semantic that SWAPGS must be done before the CR3 MOV is retained. This is good to keep because it is not that hard to do and it allows to do things like add per-CPU debugging information. What this does in the NMI code is worth pointing out. NMIs can interrupt *any* context and they can also be nested with NMIs interrupting other NMIs. The comments below ".Lnmi_from_kernel" explain the format of the stack during this situation. Changing the format of this stack is hard. Instead of storing the old CR3 value on the stack, this depends on the *regular* register save/restore mechanism and then uses %r14 to keep CR3 during the NMI. It is callee-saved and will not be clobbered by the C NMI handlers that get called. [ PeterZ: ESPFIX optimization ] Based-on-code-from: Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Dave Hansen authored
Global pages stay in the TLB across context switches. Since all contexts share the same kernel mapping, these mappings are marked as global pages so kernel entries in the TLB are not flushed out on a context switch. But, even having these entries in the TLB opens up something that an attacker can use, such as the double-page-fault attack: http://www.ieee-security.org/TC/SP2013/papers/4977a191.pdf That means that even when PAGE_TABLE_ISOLATION switches page tables on return to user space the global pages would stay in the TLB cache. Disable global pages so that kernel TLB entries can be flushed before returning to user space. This way, all accesses to kernel addresses from userspace result in a TLB miss independent of the existence of a kernel mapping. Suppress global pages via the __supported_pte_mask. The user space mappings set PAGE_GLOBAL for the minimal kernel mappings which are required for entry/exit. These mappings are set up manually so the filtering does not take place. [ The __supported_pte_mask simplification was written by Thomas Gleixner. ] Signed-off-by:
-
Thomas Gleixner authored
Many x86 CPUs leak information to user space due to missing isolation of user space and kernel space page tables. There are many well documented ways to exploit that. The upcoming software migitation of isolating the user and kernel space page tables needs a misfeature flag so code can be made runtime conditional. Add the BUG bits which indicates that the CPU is affected and add a feature bit which indicates that the software migitation is enabled. Assume for now that _ALL_ x86 CPUs are affected by this. Exceptions can be made later. Signed-off-by:
-
Thomas Gleixner authored
The loop which populates the CPU entry area PMDs can wrap around on 32bit machines when the number of CPUs is small. It worked wonderful for NR_CPUS=64 for whatever reason and the moron who wrote that code did not bother to test it with !SMP. Check for the wraparound to fix it. Fixes: 92a0f81d ("x86/cpu_entry_area: Move it out of the fixmap") Reported-by:
kernel test robot <fengguang.wu@intel.com> Signed-off-by:
Borislav Petkov <bp@alien8.de>
-
- 22 Dec, 2017 19 commits
-
-
Thomas Gleixner authored
init_espfix_bsp() needs to be invoked before the page table isolation initialization. Move it into mm_init() which is the place where pti_init() will be added. While at it get rid of the #ifdeffery and provide proper stub functions. Signed-off-by:
-
Thomas Gleixner authored
Put the cpu_entry_area into a separate P4D entry. The fixmap gets too big and 0-day already hit a case where the fixmap PTEs were cleared by cleanup_highmap(). Aside of that the fixmap API is a pain as it's all backwards. Signed-off-by:
-
Thomas Gleixner authored
Separate the cpu_entry_area code out of cpu/common.c and the fixmap. Signed-off-by:
-
Peter Zijlstra authored
Unclutter tlbflush.h a little. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by:
-
Dave Hansen authored
There are effectively two ASID types: 1. The one stored in the mmu_context that goes from 0..5 2. The one programmed into the hardware that goes from 1..6 This consolidates the locations where converting between the two (by doing a +1) to a single place which gives us a nice place to comment. PAGE_TABLE_ISOLATION will also need to, given an ASID, know which hardware ASID to flush for the userspace mapping. Signed-off-by:
-
Dave Hansen authored
First, it's nice to remove the magic numbers. Second, PAGE_TABLE_ISOLATION is going to consume half of the available ASID space. The space is currently unused, but add a comment to spell out this new restriction. Signed-off-by:
-
Dave Hansen authored
For flushing the TLB, the ASID which has been programmed into the hardware must be known. That differs from what is in 'cpu_tlbstate'. Add functions to transform the 'cpu_tlbstate' values into to the one programmed into the hardware (CR3). It's not easy to include mmu_context.h into tlbflush.h, so just move the CR3 building over to tlbflush.h. Signed-off-by:
-
Peter Zijlstra authored
Per popular request.. Signed-off-by:
-
Peter Zijlstra authored
atomic64_inc_return() already implies smp_mb() before and after. Signed-off-by:
-
Peter Zijlstra authored
__flush_tlb_single() is for user mappings, __flush_tlb_one() for kernel mappings. Signed-off-by:
-
Peter Zijlstra authored
Commit: ec400dde ("x86/microcode_intel_early.c: Early update ucode on Intel's CPU") ... grubbed into tlbflush internals without coherent explanation. Since it says its a precaution and the SDM doesn't mention anything like this, take it out back. Signed-off-by:
-
Peter Zijlstra authored
Since uv_flush_tlb_others() implements flush_tlb_others() which is about flushing user mappings, we should use __flush_tlb_single(), which too is about flushing user mappings. Signed-off-by:
Andrew Banman <abanman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Travis <mike.travis@hpe.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by:
-
Dave Hansen authored
If the kernel oopses while on the trampoline stack, it will print "<SYSENTER>" even if SYSENTER is not involved. That is rather confusing. The "SYSENTER" stack is used for a lot more than SYSENTER now. Give it a better string to display in stack dumps, and rename the kernel code to match. Also move the 32-bit code over to the new naming even though it still uses the entry stack only for SYSENTER. Signed-off-by:
-
Peter Zijlstra authored
Signed-off-by:
-
Andy Lutomirski authored
The old docs had the vsyscall range wrong and were missing the fixmap. Fix both. There used to be 8 MB reserved for future vsyscalls, but that's long gone. Signed-off-by:
-
Thomas Gleixner authored
The LDT is inherited across fork() or exec(), but that makes no sense at all because exec() is supposed to start the process clean. The reason why this happens is that init_new_context_ldt() is called from init_new_context() which obviously needs to be called for both fork() and exec(). It would be surprising if anything relies on that behaviour, so it seems to be safe to remove that misfeature. Split the context initialization into two parts. Clear the LDT pointer and initialize the mutex from the general context init and move the LDT duplication to arch_dup_mmap() which is only called on fork(). Signed-off-by:
-
Peter Zijlstra authored
The LDT is duplicated on fork() and on exec(), which is wrong as exec() should start from a clean state, i.e. without LDT. To fix this the LDT duplication code will be moved into arch_dup_mmap() which is only called for fork(). This introduces a locking problem. arch_dup_mmap() holds mmap_sem of the parent process, but the LDT duplication code needs to acquire mm->context.lock to access the LDT data safely, which is the reverse lock order of write_ldt() where mmap_sem nests into context.lock. Solve this by introducing a new rw semaphore which serializes the read/write_ldt() syscall operations and use context.lock to protect the actual installment of the LDT descriptor. So context.lock stabilizes mm->context.ldt and can nest inside of the new semaphore or mmap_sem. Signed-off-by:
-
Thomas Gleixner authored
In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be allowed to fail. Fix up all instances. Signed-off-by:
-
Andy Lutomirski authored
If something goes wrong with pagetable setup, vsyscall=native will accidentally fall back to emulation. Make it warn and fail so that we notice. Signed-off-by:
-
