- 06 Jan, 2012 40 commits
-
-
Vincent Palatin authored
When the runtime PM is activated on PCI, if a device switches state frequently (e.g. an EHCI controller with autosuspending USB devices connected) the PCI configuration traces might be very verbose in the kernel log. Let's guard those traces with DEBUG condition. Acked-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
All users of pci_create_bus() have been converted to pci_create_root_bus(), so remove it. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. This arch was unusual because it filled in bus->resource[0..3] in pcibios_init(), then overwrote them, applied io_space.offset and checked for unset resources in pcibios_fixup_bus(). I moved all of that to a new pci_controller_apertures() that we can use before scanning the root bus. CC: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Bjorn Helgaas authored
x86 has two kinds of PCI root bus scanning: (1) ACPI-based, using _CRS resources. This used pci_create_bus(), not pci_scan_bus(), because ACPI hotplug needed to split the pci_bus_add_devices() into a separate host bridge .start() method. This patch parses the _CRS resources earlier, so we can build a list of resources and pass it to pci_create_root_bus(). Note that as before, we parse the _CRS even if we aren't going to use it so we can print it for debugging purposes. (2) All other, which used either default resources (ioport_resource and iomem_resource) or information read from the hardware via amd_bus.c or similar. This used pci_scan_bus(). This patch converts x86_pci_root_bus_res_quirks() (previously called from pcibios_fixup_bus()) to x86_pci_root_bus_resources(), which builds a list of resources before we call pci_scan_root_bus(). We also use x86_pci_root_bus_resources() if we have ACPI but are ignoring _CRS. CC: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: -
Bjorn Helgaas authored
This doesn't change any functionality, but it makes a subsequent patch slightly simpler. pci_scan_bus(NULL, ...) and pci_scan_bus_parented() are identical except that pci_scan_bus() also calls pci_bus_add_devices(): pci_scan_bus_parented pci_create_bus pci_scan_child_bus pci_scan_bus pci_create_bus pci_scan_child_bus pci_bus_add_devices All callers of pcibios_scan_root() call pci_bus_add_devices() explicitly, and we don't pass a parent device, so we might as well use pci_scan_bus(). Signed-off-by: -
Bjorn Helgaas authored
We currently read the CNB20LE aperture information in a PCI quirk, which happens after we've already created the root bus. This patch changes it to read the apertures earlier so we can create the root bus with the correct resources. I believe the CNB20LE lives at "pci 0000:00:00" based on https://lkml.org/lkml/2010/8/13/220 CC: Ira W. Snyder <iws@ovro.caltech.edu> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus_parented() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. pci_scan_root_bus() also includes the pci_bus_add_devices() so we don't need to do that separately. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This patch doesn't fix a problem because sparc fixed the resources before scanning the bus, but it makes sparc more consistent with other architectures. v2: fix build error (from sfr) Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This patch doesn't fix a problem because powerpc fixed the resources before scanning the bus, but it makes powerpc more consistent with other architectures. v2: fix build error with resource pointer passing CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Bjorn Helgaas authored
No functional change. This is so we can use pcibios_phb_map_io_space() before we have a struct pci_bus. v2: fix map io phb typo CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Bjorn Helgaas authored
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Bjorn Helgaas authored
Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: linux-parisc@vger.kernel.org Signed-off-by:
-
Bjorn Helgaas authored
No functional change here; just converting from pci_scan_bus_parented() to pci_create_bus() to make a future patch simpler. CC: linux-parisc@vger.kernel.org Signed-off-by:
-
Bjorn Helgaas authored
This moves the truncate_pat_collision() call out of the pcibios_fixup_bus() path so that when a future patch builds a list of root bus resources for pci_create_bus(), it can use the truncated LMMIO range. truncate_pat_collision() used to be called in this path: pci_scan_bus_parented pci_create_bus pci_scan_child_bus pcibios_fixup_bus lba_fixup_bus truncate_pat_collision All of the PAT and lba_dev resource setup must be done before we call pci_scan_bus_parented(), so it should be safe to move the truncate_pat_collision() to just before pci_scan_bus_parented(). CC: linux-parisc@vger.kernel.org Signed-off-by: -
Bjorn Helgaas authored
Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: linux-parisc@vger.kernel.org Signed-off-by:
-
Bjorn Helgaas authored
No functional change here; just converting from pci_scan_bus_parented() to pci_create_bus() to make a future patch simpler. CC: linux-parisc@vger.kernel.org Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: David Howells <dhowells@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. Based on original patch by Deng-Cheng Zhu. Reference: https://lkml.org/lkml/2011/8/26/89 CC: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Deng-Cheng Zhu <dczhu@mips.com> Signed-off-by:
-
Bjorn Helgaas authored
Microblaze doesn't need to replace pci_scan_child_bus() or do anything special before pci_bus_add_devices(), so we can use the more generic PCI path in pci_scan_root_bus(). CC: Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This patch doesn't fix a problem because microblaze fixed the resources before scanning the bus, but it makes microblaze more consistent with other architectures. It also allows us to use the pci_scan_root_bus() path safely. CC: Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Bjorn Helgaas authored
CC: Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Bjorn Helgaas authored
The pci_bus_for_each_resource() iterator sets "res" itself, so there's no need to look it up in the bus->resource[] table. Logically part of 89a74ecc and 8a66da71. CC: Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. We can't use pci_scan_root_bus() because, like x86, ACPI hotplug currently requires pci_bus_add_devices() in a separate host bridge .start() method. v2: fix compile error by using window resource pointer instead CC: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Bjorn Helgaas authored
This doesn't change any functionality, but it makes a subsequent patch slightly simpler. CC: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. Note that peer root buses are scanned with pci_scan_bus() (which is now deprecated), so they have the default ioport_resource and iomem_resource resources. This is unchanged from before, but these resources are incorrect, and I don't know how to discover the correct ones. CC: David Howells <dhowells@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Bjorn Helgaas authored
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. v2: fix up conversion CC: linux-alpha@vger.kernel.org Signed-off-by:
-
Bjorn Helgaas authored
Users of pci_scan_bus_parented() should be converted to use either pci_scan_root_bus() (preferred, but also calls pci_bus_add_devices) or pci_create_root_bus() pci_scan_child_bus() Since pci_scan_bus_parented(), I'm marking it deprecated now and will actually remove it later. Signed-off-by: -
Bjorn Helgaas authored
This converts pci_scan_bus_parented() to use pci_create_root_bus() instead of pci_create_bus(). The new bus still has the default (incorrect) resources, so this patch doesn't help fix that problem, but it does remove one more use of pci_create_bus(). Signed-off-by:
-
Bjorn Helgaas authored
I plan to deprecate pci_scan_bus_parented(), so use pci_create_root_bus() directly instead. pci_scan_bus() itself will be removed as soon as all callers are gone, so this is just an interim step. v2: export pci_scan_bus Signed-off-by:
-
Bjorn Helgaas authored
"Early" and "header" quirks often use incorrect bus resources because they see the default resources assigned by pci_create_bus(), before the architecture fixes them up (typically in pcibios_fixup_bus()). Regions reserved by these quirks end up with the wrong parents. Here's the standard path for scanning a PCI root bus: pci_scan_bus or pci_scan_bus_parented pci_create_bus <-- A create with default resources pci_scan_child_bus pci_scan_slot pci_scan_single_device pci_scan_device pci_setup_device pci_fixup_device(early) <-- B pci_device_add pci_fixup_device(header) <-- C pcibios_fixup_bus <-- D fill in correct resources Early and header quirks at B and C use the default (incorrect) root bus resources rather than those filled in at D. This patch adds a new pci_scan_root_bus() function that sets the bus resources correctly from a supplied list of resources. I intend to remove pci_scan_bus() and pci_scan_bus_parented() after fixing all callers. Signed-off-by: -
Bjorn Helgaas authored
pci_create_bus() assigns ioport_resource and iomem_resource as the default bus resources, i.e., the entire address space. Architectures fix these later, typically in pcibios_fixup_bus() or after pci_scan_bus_parented() returns, but code that runs in the interim sees incorrect resource information. This patch adds a new pci_create_root_bus() that sets the bus resources correctly from a supplied list of resources. I intend to remove pci_create_bus() after changing all callers. Based on original patch by Deng-Cheng Zhu. Reference: http://www.spinics.net/lists/mips/msg41654.html Reference: https://lkml.org/lkml/2011/8/26/88Signed-off-by:
-
Bjorn Helgaas authored
Show the bus number and resources for every root bus we create. This will become more interesting when we supply the correct resources instead of using the defaults (ioport_resource and iomem_resource). Signed-off-by:
-
Bjorn Helgaas authored
We'd like to supply a list of resources when we create a new PCI bus, e.g., the root bus under a PCI host bridge. These are helpers for constructing that list. These are exported because the plan is to replace this exported interface: pci_scan_bus_parented() with this one: pci_add_resource(resources, ...) pci_scan_root_bus(..., resources) Signed-off-by: -
Ram Pai authored
The SRIOV capability, namely page size and total_vfs of a device are configured during enumeration phase of the device. This can potentially interfere with the PCI operations of the platform, if the IOV capability of the device is not enabled. The following patch postpones the configuration of the IOV capability of the device to a later point, when the IOV capability is explicitly enabled by the device driver. The patch is tested on x86 and power platform. Tested-by:
Donald Dutile <ddutile@redhat.com> Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Yinghai Lu authored
During debugging pcie hotplug with SRIOV with pcie switch, I found pci_stop_bus_device() is called several times for some child devices. So change original pci_remove_bus_device() to __pci_remove_bus_device(), and make it only do remove work, and add a new pci_remove_bus_device that calls pci_stop_bus_device() one time, and then call __pci_remove_bus_device(). Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Andreas Herrmann authored
Commit 24d9b70b (x86: Use PCI method for enabling AMD extended config space before MSR method) added a message when IO access to PCI ECS was enabled via access to the NB_CFG PCI register. This can lead to a bogus message like [ 0.365177] Extended Config Space enabled on 0 nodes which is misleading because IO ECS access is subsequently enabled for AMD CPUs (that support this) by modifying the corresponding NB_CFG MSR. Furthermore it's not "Extended Config Space" that is enabled by this register setting. It's the IO access that is enabled for extended configruation space. IMHO the ambiguous message needs to be cancelled. Cc: Jan Beulich <jbeulich@novell.com> Cc: Robert Richter <robert.richter@amd.com> Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
-
Myron Stowe authored
The latency timer is read-only and hardwired to zero for all PCIe devices, both Type 0 and Type 1, so don't bother trying to update it and cluttering the dmesg log with meaningless "setting latency timer to 64" messages. Signed-off-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Myron Stowe authored
This patch removes x86's architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by:
-
