- 25 Jul, 2018 17 commits
-
-
Hans Verkuil authored
Mention that IDs should not be hardcoded in applications and that the entity name must be unique within the media topology. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Make it clearer that the index starts at 0. Signed-off-by:
-
Hans Verkuil authored
Several drivers in media/i2c do not set the entity function. Correct this. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
-
Hans Verkuil authored
The entity function was ORed with the flags field instead of assigned to the function field. Correct this. Signed-off-by:
-
Hans Verkuil authored
These two drivers both have function MEDIA_ENT_F_DV_ENCODER. Signed-off-by:
-
Hans Verkuil authored
Keep the function defines in numerical order: 0x6000 comes after 0x2000, so move it back. Signed-off-by:
-
Hans Verkuil authored
Add a new function for digital video encoders such as HDMI transmitters. Signed-off-by:
-
Hans Verkuil authored
The use of 'DTV' is very confusing since it normally refers to Digital TV e.g. DVB etc. Instead use 'DV' (Digital Video), which nicely corresponds to the DV Timings API used to configure such receivers and transmitters. We keep an alias to avoid breaking userspace applications. Since this alias is only available if __KERNEL__ is *not* defined (i.e. it is only available for userspace, not kernelspace), any drivers that use it also have to be converted to the new define. These drivers are adv7604, adv7842 and tda1997x. Signed-off-by:
-
Hans Verkuil authored
Document the new struct media_v2_entity 'flags' field. Signed-off-by:
-
Hans Verkuil authored
The v2 entity structure never exposed the entity flags, which made it impossible to detect connector or default entities. It is really trivial to just expose this information, so implement this. Signed-off-by:
-
Hans Verkuil authored
Document the new struct media_v2_pad 'index' field. Signed-off-by:
-
Hans Verkuil authored
The v2 pad structure never exposed the pad index, which made it impossible to call the MEDIA_IOC_SETUP_LINK ioctl, which needs that information. It is really trivial to just expose this information, so implement this. Signed-off-by:
-
Hans Verkuil authored
Add support for the new (optional) 5V gpio in order to debug 5V changes. Some displays turn off CEC if the 5V is not detected, so it is useful to be able to monitor this line. Signed-off-by:
-
Hans Verkuil authored
Add support for the new 5V CEC events Signed-off-by:
-
Hans Verkuil authored
Add two new events to signal when the 5V line goes high or low. Signed-off-by:
-
Hans Verkuil authored
Document the two new 5V events. Signed-off-by:
-
Hans Verkuil authored
In order to debug the HDMI 5V line we need to add a new v5-gpios property. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 24 Jul, 2018 21 commits
-
-
Laurent Pinchart authored
Commit 1d389714 ("[media] v4l: rcar_fdp1: add FCP dependency") fixed a compilation breakage when the optional VIDEO_RENESAS_FCP dependency is compiled as a module while the rcar_fdp1 driver is built in. As a side effect it disabled compilation on Gen2 by disallowing the valid combination ARCH_RENESAS && !VIDEO_RENESAS_FCP. Fix it by handling the dependency the same way the vsp1 driver did in commit 19994673 ("[media] vsp1: clarify FCP dependency"). Fixes: 1d389714 ("[media] v4l: rcar_fdp1: add FCP dependency") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Neil Armstrong authored
Switch to dev_dbg for the busy TX message to avoid having a flood of: [ 228.064570] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting [ 230.368489] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting [ 234.208655] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting [ 236.512558] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting This message is only a debug hint and not an error. Fixes: 7ec2c0f7 ("media: platform: Add Amlogic Meson AO CEC Controller driver") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Hans Verkuil authored
The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by:
-
Jacopo Mondi authored
Remove a stale inclusion for the soc_camera header. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Ezequiel Garcia authored
Implementing job_abort() does not make sense on some drivers. This is not a problem, as the abort is not required to wait for the job to finish. Quite the opposite, drivers are encouraged not to wait. Demote v4l2_m2m_ops.job_abort from required to optional, and clean all drivers with dummy implementations. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
As per the documentation, job_abort is not required to wait until the current job finishes. It is redundant to do so, as the core will perform the wait operation. Remove the wait infrastructure completely. Signed-off-by:
-
Ezequiel Garcia authored
As per the documentation, job_abort is not required to wait until the current job finishes. It is redundant to do so, as the core will perform the wait operation. Remove the wait infrastructure completely. Signed-off-by:
Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by:
-
Philipp Zabel authored
Limit frame sizes to the [1, 65536] interval, media bus formats to the available list of formats, and initialize pad and try formats. Reported-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Tested-by:
-
Niklas Söderlund authored
There is no way to control the standard of subdevices which are part of a media device. The ioctls which exists all target video devices explicitly and the idea is that the video device should talk to the subdevice. For subdevices part of a media graph this is not possible and the standard must be controlled on the subdev device directly. Add four new ioctls to be able to directly interact with subdevices and control the video standard; VIDIOC_SUBDEV_ENUMSTD, VIDIOC_SUBDEV_G_STD, VIDIOC_SUBDEV_S_STD and VIDIOC_SUBDEV_QUERYSTD. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Sakari Ailus authored
A lot of sensor drivers are labelled as "sensor-level" drivers. That's odd and somewhat confusing as the term isn't used elsewhere: these are just sensor drivers. Call them such. Signed-off-by:
-
Jacopo Mondi authored
The just parsed endpoint fwnode has to be put after use. Currently this is done only in error handling path. Fix that by putting node unconditionally after use. Fixes: 01b84448 ("media: v4l2: i2c: ov7670: Implement OF mbus configuration") Signed-off-by:
-
Todor Tomov authored
The external clock frequency was set to 23.88MHz by mistake because of a platform which cannot get closer to 24MHz. The supported by the driver external clock is 24MHz so set it correctly and also fix the values of the pixel clock and link clock. However allow 1% tolerance to the external clock as this difference is small enough to be insignificant. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Jacopo Mondi authored
Handle data-enable signal polarity. If the polarity is not specifically requested to be active low, use the active high default. Signed-off-by:
-
Jacopo Mondi authored
Describe optional endpoint property 'data-enable-active' for R-Car VIN. Signed-off-by:
-
Jacopo Mondi authored
Parse the newly defined 'data-enable-active' property in parallel endpoint parsing function. Signed-off-by:
-
Jacopo Mondi authored
Add 'data-enable-active' property to endpoint node properties list. The property allows to specify the polarity of the data-enable signal, which when in active state determinates when data lines have to sampled for valid pixel data. Signed-off-by:
-
Jacopo Mondi authored
Describe the optional endpoint properties for endpoint nodes of the R-Car VIN interface device tree bindings documentation. Signed-off-by:
-
Jacopo Mondi authored
Align description of the Gen2 and Gen3 bindings for parallel input. This commit prepares for description of optional endpoint properties in ports subnodes accepting parallel video connections. Signed-off-by:
-
Luca Ceresoli authored
ask_h gets printed here instead of ask_w. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Hugues Fruchet authored
Save load of mode registers array when V4L2 client sets a format or a frame interval which selects the same mode than the current one. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Sakari Ailus authored
The smiapp driver is licensed under GNU GPL v2 only, as stated by the header. Reflect this in the MODULE_LICENSE macro. Signed-off-by:
-
- 13 Jul, 2018 1 commit
-
-
Sean Young authored
Currently we are leaking bpf programs when they are detached from the lirc device; the refcount never reaches zero. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 04 Jul, 2018 1 commit
-
-
Sylwester Nawrocki authored
This patch fixes potential NULL pointer dereference as indicated by the following static checker warning: drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane() error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'. Fixes: 34947b8a: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
