Skip to content

L
linux
Switch branch/tag
  1. 22 Mar, 2021 26 commits
  3. 21 Mar, 2021 9 commits
    • Vladimir Oltean's avatar
      Revert "net: dsa: sja1105: Clear VLAN filtering offload netdev feature" · a1e6f641
      Vladimir Oltean authored 
      This reverts commit e9bf9694.

The topic of the reverted patch is the support for switches with global
VLAN filtering, added by commit 061f6a50 ("net: dsa: Add
ndo_vlan_rx_{add, kill}_vid implementation"). Be there a switch with 4
ports swp0 -> swp3, and the following setup:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br0

What would happen with VLAN-tagged traffic received on standalone ports
swp2 and swp3? Well, it would get dropped, were it not for the
.ndo_vlan_rx_add_vid and .ndo_vlan_rx_kill_vid implementations (called
from vlan_vid_add and vlan_vid_del respectively). Basically, for DSA
switches where VLAN filtering is a global attribute, we enforce the
standalone ports to have 'rx-vlan-filter: off [fixed]' in their ethtool
features, which lets the user know that all VLAN-tagged packets that are
not explicitly added in the RX filtering list are dropped.

As for the sja1105 driver, at the time of the reverted patch, it was
operating in a pretty handicapped mode when it had ports under a bridge
with vlan_filtering=1. Specifically, it was unable to terminate traffic
through the CPU port (for further explanation see "Traffic support" in
Documentation/networking/dsa/sja1105.rst).

However, since then, the sja1105 driver has made considerable progress,
and that limitation is no longer as severe now. Specifically, since
commit 2cafa72e ("net: dsa: sja1105: add a new
best_effort_vlan_filtering devlink parameter"), the driver is able to
perform CPU termination even when some ports are under bridges with
vlan_filtering=1. Then, since commit 8841f6e6 ("net: dsa: sja1105:
make devlink property best_effort_vlan_filtering true by default"), this
even became the default operating mode.

So we can now take advantage of the logic in the DSA core.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1e6f641
    • Heiner Kallweit's avatar
      r8169: add support for ethtool get_ringparam · dc4aa50b
      Heiner Kallweit authored 
      Add support for the ethtool get_ringparam operation.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc4aa50b
    • David S. Miller's avatar
      Merge branch 'ipa-cfg-data-updates' · e0e7af0d
      David S. Miller authored 
      Alex Elder says:

====================
net: ipa: more configuration data updates

This series starts with two patches that should have been included
in an earlier series.  With these in place, QSB settings are
programmed from information found in the data files rather than
being embedded in code.  Support is then added for reprenting
another QSB property (supported for IPA v4.0+).

The third patch updates the definition of the sequencer type used
for an endpoint.  Previously a set of 2-byte symbols with fairly
long names defined the sequencer type, but now those are broken into
1-byte halves whose names are a little more informative.

The fourth patch moves the sequencer type definition so it only
applies to TX endpoints (they aren't valid for RX endpoints).  And
the last makes some minor documentation updates.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0e7af0d
    • Alex Elder's avatar
      net: ipa: update some comments in "ipa_data.h" · b259cc2a
      Alex Elder authored 
      Fix/expand some comments in "ipa_data.h".
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b259cc2a
    • Alex Elder's avatar
      net: ipa: sequencer type is for TX endpoints only · 1690d8a7
      Alex Elder authored 
      We only program the sequencer type for TX endpoints.  So move the
definition of the sequencer type fields into the TX-specific portion
of the endpoint configuration data.  There's no need to maintain
this in the IPA structure; we can extract it from the configuration
data it points to in the one spot it's needed.

We previously specified the sequencer type for RX endpoints with
INVALID values.  These are no longer needed, so get rid of them.
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1690d8a7
    • Alex Elder's avatar
      net: ipa: split sequencer type in two · 8ee5df65
      Alex Elder authored 
      An IPA endpoint has a sequencer that must be configured based on how
the endpoint is to be used.  Currently the IPA code programs the
sequencer type by splitting a value into four 4-bit nibbles.  Doing
that doesn't really add much value, and regardless, a better way of
splitting the sequencer type is into two halves--the lower byte
describing how normal packet processing is handled, and the next
byte describing information about processing replicas.

So split the sequencer type into two sub-parts:  the sequencer type
and the replication sequencer type.  Define the values supported for
the "main" sequencer type, and define the values supported for the
replication part separately.

In addition, the sequencer type names are quite verbose, encoding
what the type includes, but also what it *excludes*.  Rename the
sequencer types in a way that mainly describes the number of passes
that a packet takes through the IPA processing pipeline, and how
many of those passes end by supplying the processed packet to the
microprocessor.

The result expands the supported types beyond what is required for
now, but simplifies the way these are defined.
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ee5df65
    • Alex Elder's avatar
      net: ipa: implement MAX_READS_BEATS QSB data · b9aa0805
      Alex Elder authored 
      Starting with IPA v4.0, a limit is placed on the number of bytes
outstanding in a transaction, to reduce latency.  The limit is
imposed only if this value is non-zero.

We don't use a non-zero value for SC7180, but newer versions of IPA
do.  Prepare for that by allowing a programmed value to be specified
in the platform configuration data.
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b9aa0805
    • Alex Elder's avatar
      net: ipa: use configuration data for QSB settings · 8a81efac
      Alex Elder authored 
      Use the QSB configuration data in ipa_hardware_config_qsb(), rather
than determining in code what values to use based on IPA version.
Pass configuration data to ipa_hardware_config() so it can be passed
to ipa_hardware_config_qsb().
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a81efac
    • Sai Kalyaan Palla's avatar
      net: decnet: Fixed multiple coding style issues · b29648ad
      Sai Kalyaan Palla authored 
      Made changes to coding style as suggested by checkpatch.pl
changes are of the type:
	open brace '{' following struct go on the same line
	do not use assignment in if condition
Signed-off-by: default avatarSai Kalyaan Palla <saikalyaan63@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b29648ad
  5. 19 Mar, 2021 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7