- 09 Dec, 2020 14 commits
-
-
Mordechay Goodstein authored
Curretly we only mark HW error state "after" trying to collect HW data, but if any HW error happens while colleting HW data we go into endless loop. avoid this by setting HW error state "before" collecting HW data. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4c7e5a87da15.Ic35b2f28ff08f7ac23143c80f224d52eb97a0454@changeidSigned-off-by:
-
Mordechay Goodstein authored
This is used for BT node and for any user that wants to control what events would be send from FW to the driver. Signed-off-by:
-
Luca Coelho authored
Add support to the 6GHz band (aka. Ultra High Band or UHB). This allows us to scan and connect to channels in that band, including all the relevant features, such as preferred scan channels, colocated channels etc. Co-developed-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Tova Mussai <tova.mussai@intel.com> Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
-
Johannes Berg authored
This data is not necessarily the same across devices as we may modify it due to the number of antennas and for overrides (though in practice overrides are likely to be identical), so modifying the global data is wrong. Make a copy of it in the NVM data and modify it there instead. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
We no longer need code that was introduced to differentiate between two early versions of 8260. We can remove this convoluted way to get the hardware version that was needed because of a bug in the register's configuration. Moreover, since we no longer need to access the PRPH registers, we no longer need to wake up the device, request ownership, etc... Remove all that. This allows us to get the rid of the obsolete comment about the AUX bus MISC address space which should have been moved when this code was moved away from here. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
If we already read the NVM, we don't need to read it again. Make sure that this is the case with a WARNING. Signed-off-by:
-
Mordechay Goodstein authored
If case we have an error reading FW memory we get garbage (stack old data) in the report, so just initialize the table to zero. Signed-off-by:
-
Naftali Goldstein authored
This command should be used only when there's a real client station. Currently it works, but since soon the driver will stop actually having an auxiliary station by default, and this command requires _some_ valid station, it needs to be removed from this flow. Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
-
Mordechay Goodstein authored
Reclaim flows are bus-independent TX functions so we move it to the common place handling bus-independent tx operations used spatch rule @@ @@ ( -iwl_trans_pcie_freeze_txq_timer +iwl_trans_txq_freeze_timer | -iwl_trans_pcie_set_q_ptrs +iwl_trans_txq_set_q_ptrs | -iwl_pcie_txq_free_tfd +iwl_txq_free_tfd | -iwl_pcie_txq_progress +iwl_txq_progress | -iwl_trans_pcie_reclaim +iwl_trans_txq_reclaim ) Signed-off-by:
-
Janie Tu authored
The profile shows an invalid value because the wrong format was used. A u8 value should use by %hhu, not %hhd. Fix thisit by changing it to %hhu. Signed-off-by:
Janie Tu <janiex.tu@intel.com> Signed-off-by:
-
Rotem Saado authored
from AX210 generation the write pointer is in Bytes. to be align with all previous HWs convert it DWs. Signed-off-by:
Rotem Saado <rotem.saado@intel.com> Signed-off-by:
-
Mordechay Goodstein authored
This enables analyzing phy/HW bugs. Signed-off-by:
-
Mordechay Goodstein authored
Currently calling iwl_txq_dyn_free only deletes the queue memory/DMA but any active timers are not dealt with. Signed-off-by:
-
Ping-Ke Shih authored
ofdm_index[] is used to indicate how many power compensation is needed to current thermal value. For internal PA module or 2.4G band, the min_index is different from other cases. This issue originally is reported by Dan. He found the size of ofdm_index[] is 2, but access index 'i' may be equal to 2 if 'rf' is 2 in case of 'is2t'. In fact, the chunk of code is added to wrong place, so move it back to proper place, and then power compensation and buffer overflow are fixed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201207031903.7599-1-pkshih@realtek.com
-
- 08 Dec, 2020 8 commits
-
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* Fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* Fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 5.11 * mt7915 fixes * mt7615 fixes * support for more sta interfaces on mt7615/mt7915 * mt7915 encap offload * performance improvements * channel noise report on mt7915 * usb/sdio support improvements * mt7915 testmode support * mt7915 DBDC support * warning fixes
-
Chin-Yen Lee authored
When 8822CE is associating with AP, driver will poll status bit of IQ calibration to confirm the IQ calibration is done, and then move on the association process. Current polling time for IQ calibration is 6 seconds. But occasionally driver fails in polling the status bit because the status bit is not set after IQ calibration is done. When it happends, association process will be serieously delayed up to 6 seconds. To avoid it, we reduce polling time to 300ms, in which the IQ calibration can be done. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
'const struct dev_pm_ops rtw_pm_ops' is declared by pci.c, and it should be declare as 'extern' in pci.h. Without 'extern' causes every file including pci.h has an individual instance of rtw_pm_ops but not reference to the one declared in pci.c If kernel config, like test robot, doesn't build driver as module, it leads multiple definition. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 2e86ef41 ("rtw88: pci: Add prototypes for .probe, .remove and .shutdown") Signed-off-by:
-
Zhang Xiaohui authored
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by:
Zhang Xiaohui <ruc_zhangxiaohui@163.com> Signed-off-by:
-
- 07 Dec, 2020 16 commits
-
-
Colin Ian King authored
The pointer 'entry' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: cc0b88cf ("[PATCH] Add adm8211 802.11b wireless driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by:
-
Zong-Zhe Yang authored
When driver was developed, FCC regulation didn't enable channel 144 and there was no demand for channel 144 at that time. Although HW actually supports channel 144, driver didn't announce channel 144. Therefore, channel 144 (20 MHz), channel 142 (40 MHz) and channel 138 (80 MHz) couldn't be used. Today, channel 144 has been enabled by regulations and is gradually being supported. With test requirements, we declare hw supports channel 144. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Colin Ian King authored
Currently the variable 'interval' is not initialized and is only set to 1 when oex_stat->bt_418_hid_existi is true. Fix this by inintializing variable interval to 0 (which I'm assuming is the intended default). Addresses-Coverity: ("Uninitalized scalar variable") Fixes: 5b2e9a35 ("rtw88: coex: add feature to enhance HID coexistence performance") Signed-off-by: -
Colin Ian King authored
The assignment to pointer vif is redundant as the assigned value is never read, hence it can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Ganapathi Bhat authored
As of 6-DEC-2019, NXP has acquired Marvell’s Wireless business unit. This change is to update the license text accordingly. commit 932183aa ("mwifiex: change license text from MARVELL to NXP") does this, but it left out two files. Signed-off-by:
James Cao <zheng.cao@nxp.com> Signed-off-by:
Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
-
Christophe JAILLET authored
he wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'mwl8k_rxq_init()' and 'mwl8k_txq_init()' GFP_KERNEL can be used because this flag is already used in a 'kcalloc()' call, just a few line below. When memory is allocated in 'mwl8k_firmware_load_success()' GFP_KERNEL can be used because this flag is already used within 'ieee80211_register_hw()' which is called just a few line below. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Lee Jones authored
Also strip out other duplicates from driver specific headers. Ensure 'main.h' is explicitly included in 'pci.h' since the latter uses some defines from the former. It avoids issues like: from drivers/net/wireless/realtek/rtw88/rtw8822be.c:5: drivers/net/wireless/realtek/rtw88/pci.h:209:28: error: ‘RTK_MAX_TX_QUEUE_NUM’ undeclared here (not in a function); did you mean ‘RTK_MAX_RX_DESC_NUM’? 209 | DECLARE_BITMAP(tx_queued, RTK_MAX_TX_QUEUE_NUM); | ^~~~~~~~~~~~~~~~~~~~ Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtw88/pci.c:1488:5: warning: no previous prototype for ‘rtw_pci_probe’ [-Wmissing-prototypes] 1488 | int rtw_pci_probe(struct pci_dev *pdev, | ^~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1568:6: warning: no previous prototype for ‘rtw_pci_remove’ [-Wmissing-prototypes] 1568 | void rtw_pci_remove(struct pci_dev *pdev) | ^~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1590:6: warning: no previous prototype for ‘rtw_pci_shutdown’ [-Wmissing-prototypes] 1590 | void rtw_pci_shutdown(struct pci_dev *pdev) | ^~~~~~~~~~~~~~~~ Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Misc updates This patchset contains miscellaneous patches we gathered in our queue. Some of them are dependencies of larger patchsets that I will submit later this cycle. Patches #1-#3 perform small non-functional changes in mlxsw. Patch #4 adds more extended ack messages in mlxsw. Patch #5 adds devlink parameters documentation for mlxsw. To be extended with more parameters this cycle. Patches #6-#7 perform small changes in forwarding selftests infrastructure. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to figure out the IP address and virtual router id. Those are exactly the same as in the fib_entry it is called for. So just use that and reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op code similar to nve. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Petr Machata authored
The indicated version fixes an issue whereby the MOMTE register would by default enable mirroring of ECN-marked traffic from all traffic classes, once the ECN mirroring was configured. This fix is necessary for offload of RED "ecn_mark" qevent. Signed-off-by:
-
Ido Schimmel authored
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7: WARNING use flexible-array member instead Signed-off-by:
-
Ido Schimmel authored
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead Signed-off-by:
-
Ido Schimmel authored
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint whenever a request is sent to the device and whenever a response is received from it. However, the tracepoint is not triggered when an event (e.g., port up / down) is received from the device. Also trace EMAD events in order to log a more complete picture of all the exchanged hardware messages. Signed-off-by:
-
Ido Schimmel authored
Test that the reference count of a router interface (RIF) configured for a LAG is incremented / decremented when ports join / leave the LAG. Use the offload indication on routes configured on the RIF to understand if it was created / destroyed. The test fails without the previous patch. Signed-off-by:
-
Ido Schimmel authored
In case a router interface (RIF) is configured for a LAG, make sure its configuration is applied on the new LAG member. Signed-off-by:
-
- 06 Dec, 2020 2 commits
-
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve rtl_rx and NUM_RX_DESC handling This series improves rtl_rx() and the handling of NUM_RX_DESC. ==================== Signed-off-by: -
Heiner Kallweit authored
After recent changes there's no need any longer to define NUM_RX_DESC as an unsigned value. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
