This patch adds alignment checks in all the helper macros in
hw_atl2_utils_fw.c
These alignment checks are compile-time, so runtime is not affected.

All these helper macros assume the length to be aligned (multiple of 4).
If it's not aligned, then there might be issues, e.g. stack corruption.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add a missing space in the comment in aq_nic.h
Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a typo in aq_ring_tx_clean.
stats is a union, so the typo doesn't cause any issues, but it's a typo
nonetheless.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes aq_pci_func_init() static, because it's not used anywhere
outside the file itself.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch replaces ENOTSUPP (where it was used by mistake) with
EOPNOTSUPP.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the type for variable which is assigned from enum,
as such it should have been int, not u32.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a checkpatch warning.

Fixes: aec0f1aa ("net: atlantic: MACSec offload statistics implementation")
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: refactor token container

Currently the msk sockets are stored in a single radix tree, protected by a
global spin_lock. This series moves to an hash table, allocated at boot time,
with per bucker spin_lock - alike inet_hashtables, but using a different key:
the token itself.

The above improves scalability, as write operations will have a far later chance
to compete for lock acquisition, allows lockless lookup, and will allow
easier msk traversing - e.g. for diag interface implementation's sake.

This also introduces trivial, related, kunit tests and move the existing in
kernel's one to kunit.

v1 -> v2:
 - fixed a few extra and sparse warns
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unit tests for the internal MPTCP token APIs, using KUNIT

v1 -> v2:
 - use the correct RCU annotation when initializing icsk ulp
 - fix a few checkpatch issues
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

currently MPTCP uses a custom hook to executed unit tests at
boot time. Let's use the KUNIT framework instead.
Additionally move the relevant code to a separate file and
export the function needed by the test when self-tests
are build as a module.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the radix tree with a hash table allocated
at boot time. The radix tree has some shortcoming:
a single lock is contented by all the mptcp operation,
the lookup currently use such lock, and traversing
all the items would require a lock, too.

With hash table instead we trade a little memory to
address all the above - a per bucket lock is used.

To hash the MPTCP sockets, we re-use the msk' sk_node
entry: the MPTCP sockets are never hashed by the stack.
Replace the existing hash proto callbacks with a dummy
implementation, annotating the above constraint.

Additionally refactor the token creation to code to:

- limit the number of consecutive attempts to a fixed
maximum. Hitting a hash bucket with a long chain is
considered a failed attempt

- accept() no longer can fail to token management.

- if token creation fails at connect() time, we do
fallback to TCP (before the connection was closed)

v1 -> v2:
 - fix "no newline at end of file" - Jakub
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the missing annotation in some setup-only
functions.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: organize driver docs by device type

This series finishes off what I started in
commit b255e500 ("net: documentation: build a directory structure for drivers").
The objective is to de-clutter our documentation folder so folks
have a chance of finding relevant info. I _think_ I got all the
driver docs from the main documentation directory this time around.

While doing this I realized that many of them are of limited relevance
these days, so I went ahead and sliced the drivers directory by
technology. Those feeling nostalgic are free to dive into the FDDI,
ATM etc. docs, but for most Ethernet is what we care about.

v1:
 - simplify Intel's docs list in MAINTAINERS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for defza and skfp under device_drivers/fddi.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for cxacru, fore200e and iphase under device_drivers/atm.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for cops and ltpc under device_drivers/appletalk.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move docs for hinic and altera_tse under device_drivers/ethernet.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move ray_cs into Wi-Fi driver docs subdirectory.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move baycom to hamradio.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move z8530 docs to hamradio and wan subdirectories.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Organize driver documentation by device type. Most documents
have fairly verbose yet uninformative names, so let users
first select a well defined device type, and then search for
a particular driver.

While at it rename the section from Vendor drivers to
Hardware drivers. This seems more accurate, besides people
sometimes refer to out-of-tree drivers as vendor drivers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bartosz Golaszewski says:

====================
net: phy: relax PHY and MDIO reset handling

Previously these patches were submitted as part of a larger series[1]
but since the approach in it will have to be reworked I'm resending
the ones that were non-controversial and have been reviewed for upstream.

Florian suggested a better solution for managing multiple resets. While
I will definitely try to implement something at the driver model's bus
level (together with regulator support), the 'resets' and 'reset-gpios'
DT property is a stable ABI defined in mdio.yaml so improving its support
is in order as we'll have to stick with it anyway. Current implementation
contains an unnecessary limitation where drivers without probe() can't
define resets.

Changes from the previous version:
- order forward declarations in patch 4 alphabetically
- collect review tags

[1] https://lkml.org/lkml/2020/6/22/253
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarily to PHY drivers - there's no reason to require probe() to be
implemented in order to call mdio_device_reset(). MDIO devices can have
resets defined without needing to do anything in probe().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we only call phy_device_reset() if the PHY driver implements
the probe() callback. This is not mandatory and many drivers (e.g.
realtek) don't need probe() for most devices but still can have reset
GPIOs defined. There's no reason to depend on the presence of probe()
here so pull the reset code out of the if clause.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This header refers to struct reset_control but doesn't include any reset
header. The structure definition is probably somehow indirectly pulled in
since no warnings are reported but for the sake of correctness add the
forward declaration for struct reset_control.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keeping the headers in alphabetical order is better for readability and
allows to easily see if given header is already included.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some PHYs connected to this ethernet hardware support the WoL feature.
But when WoL is enabled and the machine is powered off, the PHY remains
waiting for a magic packet at max speed (i.e. 1Gbps), which is a waste of
energy.

Slow down the PHY speed before stopping the ethernet if WoL is enabled,
and save some energy while the machine is powered off or sleeping.

Tested using an Armada 370 based board (LS421DE) equipped with a Marvell
88E1518 PHY.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2020-06-25

This series contains updates to i40e driver and removes the individual
driver versions from all of the Intel wired LAN drivers.

Shiraz moves the client header so that it can easily be shared between
the i40e LAN driver and i40iw RDMA driver.

Jesse cleans up the unused defines, since they are just dead weight.

Alek reduces the unreasonably long wait time for a PF reset after reboot
by using jiffies to limit the maximum wait time for the PF reset to
succeed.  Added additional logging to let the user know when the driver
transitions into recovery mode.  Adds new device support for our 5 Gbps
NICs.

Todd adds a check to see if MFS is set after warm reboot and notifies
the user when MFS is set to anything lower than the default value.

Arkadiusz fixes a possible race condition, where were holding a
spin-lock while in atomic context.

v2: removed code comments that were no longer applicable in patch 2 of
    the series.  Also removed 'inline' from patch 4 and patch 8 of the
    series.  Also re-arranged code to be able to remove the forward
    function declarations.  Dropped patch 9 of the series, while the
    author works on cleaning up the commit message.
v3: Updated patch 8 description to answer Jakub's questions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns:

drivers/net/bonding/bond_main.c:4657:23: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP))
             ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

drivers/net/bonding/bond_main.c:4681:23: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP))
             ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

This warning occurs when a comparision has two sets of parentheses,
which is usually the convention for doing an assignment within an
if statement. Since equality comparisons do not need a second set of
parentheses, remove them to fix the warning.

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Link: https://github.com/ClangBuiltLinux/linux/issues/1066Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify meson8b_init_rgmii_tx_clk() by using struct clk_parent_data to
initialize the clock parents. No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was also calling bnx2x_set_power_state() to set the power state
of the device by changing the device's registers' value. It is no more
needed.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some occasions task held spinlock (mac_filter_hash_lock),
while being rescheduled due to admin queue mutex_lock.  The struct
i40e_spinlock asq_spinlock, which later expands to struct mutex
spinlock.  Moved i40e_aq_set_vsi_multicast_promiscuous(),
i40e_aq_set_vsi_unicast_promiscuous(),
i40e_aq_set_vsi_mc_promisc_on_vlan(), and
i40e_aq_set_vsi_uc_promisc_on_vlan() outside of atomic context.  Without
this patch there is a race condition, which might result in scheduling
while in atomic context.  The race condition is between the thread, which
holds mac_filter_hash_lock, while trying to acquire an admin queue mutex
and a thread, which already has said admin queue mutex. The thread, which
holds spinlock, fails to acquire the mutex, which causes this thread to
sleep.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Make possible for the i40e driver to bind to the new v710 for 5GBASE-T
NICs.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As with other networking drivers, remove the unnecessary driver version
from the Intel drivers. The ethtool driver information and module version
will then report the kernel version instead.

For ixgbe, i40e and ice drivers, the driver passes the driver version to
the firmware to confirm that we are up and running.  So we now pass the
value of UTS_RELEASE to the firmware.  This adminq call is required per
the HAS document.  The Device then sends an indication to the BMC that the
PF driver is present. This is done using Host NC Driver Status Indication
in NC-SI Get Link command or via the Host Network Controller Driver Status
Change AEN.

What the BMC may do with this information is implementation-dependent, but
this is a standard NC-SI 1.1 command we honor per the HAS.

CC: Bruce Allan <bruce.w.allan@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Alek Loktionov <aleksandr.loktionov@intel.com>
CC: Kevin Liedtke <kevin.d.liedtke@intel.com>
CC: Aaron Rowden <aaron.f.rowden@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>

A customer was chain-booting to provision his systems and one of the
steps was setting MFS. MFS isn't cleared by normal warm reboots
(clearing requires a GLOBR) and there was no indication of why Jumbo
Frame receives were failing.

Add a warning if MFS is set to anything lower than the default.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Detect and log information about pre-recovery mode when firmware
transitions to a recovery mode.
When a firmware transitions to a recovery mode it stores a number
of unexpected EMP resets in one of its registers. The number of EMP
resets ranging from 0x21 to 0x2A indicates that FW transitions
to recovery mode. Use these values to emit log entry about transition
process. Previously the pre-recovery mode may not have been detected
and there was no log entry when NIC was in pre-recovery mode.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Use jiffies to limit max waiting time for PF reset to succeed.
Previous wait loop was unreliable. It required unreasonably long time
to wait for PF reset after reboot when NIC was about to enter
recovery mode
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove all the unused defines as they are just dead weight.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>