- 13 Feb, 2024 6 commits
-
-
Pierre-Louis Bossart authored
The existing code uses (stream_tag - 1) for the host and link dma id. This is correct for playback, but for capture this results in an invalid dma_type being used. The firmware assumes that the dma_id for capture is always larger than DAI_NUM_HDA_OUT This patch adds the offset for num_playback_streams, filled on Intel platforms with the value extracted from the hardware capabilities. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The CHAIN_DMA IPC needs the number of playback streams as a start offset for the dma_id of a capture stream. This offset can be retrieved on Intel platforms from the GCAP information, and stored in the sof_ipc4_fw_data structure. One could argue that the fields added are not really dependent on any firmware definitions but rather on hardware capabilities, but they are required for the IPC CHAIN_DMA definitions so adding them in ipc4_fw_data isn't completely silly. The CHAIN_DMA IPC is currently only functional on Intel HDaudio DMAs, and gated by the snd_sof_is_chain_dma_supported() helper. Signed-off-by:
-
Pierre-Louis Bossart authored
Use the existing callbacks and mix/match of HDaudio and SoundWire support. Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Reuse existing function to get the interface mask and expose it to the SOF core with a callback - the main user is the IPC4 topology so only HDaudio platforms provide this callback. Signed-off-by:
-
Pierre-Louis Bossart authored
IPC4 introduced a 'chain-dma' mode when host and link DMA are connected by firmware without using a regular pipeline or the ability to add intermediate connections. This mode is not available on all platforms and all links, so add a platform-specific callback to help the SOF ipc4-topology core handle different hardware+firmware configurations. Signed-off-by:
-
Pierre-Louis Bossart authored
The chain_dma mode is currently only handled for HDaudio, but can be used for orther DAIs starting with LunarLake. Move the chain_dma handling earlier. Error detection for the chain_dma case for older platforms is handled at a different level. Signed-off-by:
-
- 12 Feb, 2024 2 commits
-
-
Yinchuan Guo authored
This patch corrects a common misspelling of "request" as "reguest" found in error log across multiple files within sound/soc/codecs. Signed-off-by:
Yinchuan Guo <guoych37@mail2.sysu.edu.cn> Link: https://msgid.link/r/20240212144247.43744-1-guoych37@mail2.sysu.edu.cnSigned-off-by:
-
Daniel Baluta authored
We describe tplg_file_name and drv_name using snd_sof_of_mach array and select correct machine description based on dts compatible string. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by:
Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240212125258.420265-1-daniel.baluta@oss.nxp.comSigned-off-by:
-
- 09 Feb, 2024 2 commits
-
-
Cezary Rojewski authored
Add functionality to read version of loaded FW from sysfs. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20240209085256.121261-1-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Gergo Koteles authored
The acpi_subysystem_id is only written and freed, not read, so unnecessary. Signed-off-by:
Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/454639336be28d2b50343e9c8366a56b0975e31d.1707456753.git.soyer@irl.huSigned-off-by:
-
- 08 Feb, 2024 29 commits
-
-
Bard Liao authored
The soundwire links do not have their IDs as consecutive numbers, thus the last link might have lower be_id than the previous one and this leads to id collision with non SDW links. For example, create dai link SDW0-Playback-SimpleJack, id 0 create dai link SDW0-Capture-SmartMic, id 4 create dai link SDW0-Capture-SimpleJack, id 1 create dai link SDW2-Playback-SmartAmp, id 2 create dai link SDW2-Capture-SmartAmp, id 3 create dai link iDisp1, id 4 create dai link iDisp2, id 5 create dai link iDisp3, id 6 Reviewed-by:
Chao Song <chao.song@linux.intel.com> Co-developed-by:
-
Chao Song authored
This patch adds match table for rt722 multiple function codec on link 0. Reviewed-by:
-
Chao Song authored
This patch adds RT712 support for LNL. Reviewed-by:
-
Charles Keepax authored
Recent commits remove a lot of init functions remove their function prototypes as well. Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Charles Keepax authored
As this function is now used in sof_board_helpers it requires a build stub for the case SSP_COMMON is not built in. Fixes: ba0c7c32 ("ASoC: Intel: board_helpers: support amp link initialization") Reviewed-by:
-
mosomate authored
Added DMI quirk to handle the rebranded variants of Intel NUC M15 (LAPRC710) laptops. The DMI matching is based on motherboard attributes. Link: https://github.com/thesofproject/linux/issues/4218Signed-off-by:
Máté Mosonyi <mosomate@gmail.com> Reviewed-by:
-
Bard Liao authored
Some codec .init callbacks are empty after removing dai_links->init = xxx_rtd_init;. Remove those callbacks. Reviewed-by:
-
Bard Liao authored
Currently, we set sdw dai link .init callback in the codec_info_list's dais.init function. This works fine if all codecs in the dai link are the same. However, we need to do all the .init stuff for all different codecs in the dai link if not all codecs in the dai link are the same. Use a common dai link .init callback to call the new rtd_init callback in sof_sdw_dai_info{} to do rtd_init for each dai. Some codec init callback will become empty after this change. They will be removed in the follow up patch. Reviewed-by: -
Bard Liao authored
Use helper to get codec dai by name. Reviewed-by:
-
Bard Liao authored
Use helper to get codec dai by name. Reviewed-by:
-
Bard Liao authored
Use helper to get codec dai by name. Reviewed-by:
-
Bard Liao authored
Use helper to get codec dai by name. Reviewed-by:
-
Bard Liao authored
Use helper to get codec dai by name. Reviewed-by:
-
Bard Liao authored
Use helper to get codec dai by name. Reviewed-by:
-
Bard Liao authored
Currently, we assume the codecs in a dai link are all the same. So that we get codec dai with snd_soc_rtd_to_codec(rtd, 0) in dai_links ->init callback. However, a link can include different codecs. For example, a 4 speakers link can consist of rt712 and rt1316. Therefore, we need to select the codec dai by name in the dai link. Reviewed-by:
-
Bard Liao authored
2 amps can be in the same or different dai links. To handle this, the existing code implements different spk_init functions to add dapm routes for different amps. However, sof_sdw.c doesn't support non-aggregated amp any more since it used pre-defined BE id. With that assumption, combine the spk_init functions together. This is a preparation of putting different types amps in a single dai link. Reviewed-by:
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Add an new field link_order_overwrite to sof_card_private structure to support machine drivers which DAI link order is different from the order used in sof_rt5682 (i.e. GLK boards or no-codec boards). Reviewed-by:
-
Brent Lu authored
Some dmi quirks are duplicated since codec and amplifier type are removed from board quirk. Remove redundant quirks. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "mtl_rt5682_def" board to reduce the number of mtl board configs. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "rpl_rt5682_def" board to reduce the number of rpl board configs. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "adl_rt5682_def" board to reduce the number of adl board configs. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "tgl_rt5682_def" board to reduce the number of tgl board configs. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "jsl_rt5682_def" board to reduce the number of jsl board configs. Reviewed-by:
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: In some cases it may be desirable to provide default initial configuration for FW module using payload. To facilitate such solution extend topology to contain initial config information, parse it and then send data to FW if present. Amadeusz Sławiński (3): ASoC: Intel: avs: UAPI: Add tokens for initial config feature ASoC: Intel: avs: Add topology parsing support for initial config ASoC: Intel: avs: Send initial config to module if present include/uapi/sound/intel/avs/tokens.h | 9 ++ sound/soc/intel/avs/path.c | 33 ++++++ sound/soc/intel/avs/topology.c | 164 +++++++++++++++++++++++++- sound/soc/intel/avs/topology.h | 13 ++ 4 files changed, 217 insertions(+), 2 deletions(-) -- 2.34.1
-
Krzysztof Kozlowski authored
The struct sdw_slave_ops is not modified and sdw_driver takes pointer to const, so make it a const for code safety. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240208105011.128294-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Amadeusz Sławiński authored
If there are initial configs to send to module on init do send them. Reviewed-by:
-
Amadeusz Sławiński authored
Add topology parsing for initial config. Reviewed-by:
-
Amadeusz Sławiński authored
Allow for defining initial config which will be send after module initialization to configure initial module state. This is only useful for modules which need to be configured on init. Reviewed-by:
-
- 07 Feb, 2024 1 commit
-
-
Dharma Balasubiramani authored
Convert atmel,asoc-wm8904 devicetree binding to json-schema. Signed-off-by:
Dharma Balasubiramani <dharma.b@microchip.com> Reviewed-by:
-
