- 17 Oct, 2016 5 commits
-
-
Shashank Sharma authored
This patch adds drm flag bits for aspect ratio information Currently drm flag bits don't have field for mode's picture aspect ratio. This field will help the driver to pick mode with right aspect ratio, and help in setting right VIC field in avi infoframes. V2: Addressed review comments from Sean - Changed PAR-> PIC_AR V3: Rebase V3: Added r-b by Jose Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-2-git-send-email-shashank.sharma@intel.com
-
Dmitry Vyukov authored
Size of kmalloc() in vga_arb_write() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Allocate the buffer on stack to avoid the WARNING. The string must be small (e.g "target PCI:domain:bus:dev.fn"). Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: syzkaller@googlegroups.com Signed-off-by:
-
Chris Wilson authored
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Maarten Lankhorst authored
Now that drm_crtc_index takes a const, the same can be done for drm_crtc_mask. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Brian Starkey authored
Add some additional comments to more explicitly describe the meaning and usage of the three CRTC modeset detection booleans: mode_changed, connectors_changed and active_changed. Suggested-by:
Brian Starkey <brian.starkey@arm.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 13 Oct, 2016 4 commits
-
-
Dan Carpenter authored
A recent cleanup changed the kmalloc() + copy_from_user() to memdup_user() but the error handling wasn't updated so we might call kfree(-EFAULT) and crash. Fixes: a6e3918b ('GPU-DRM-Savage: Use memdup_user() rather than duplicating') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jiang Biao authored
Added comments for new parameters. Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
-
Jiang Biao authored
Remove useless comment in framebuffer.c. Signed-off-by:
-
Shyam Saini authored
Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by:
Shyam Saini <mayhs11saini@gmail.com> Signed-off-by:
-
- 12 Oct, 2016 8 commits
-
-
Chris Wilson authored
In order to be completely generic, we have to double check the read seqlock after acquiring a reference to the fence. If the driver is allocating fences from a SLAB_DESTROY_BY_RCU, or similar freelist, then within an RCU grace period a fence may be freed and reallocated. The RCU read side critical section does not prevent this reallocation, instead we have to inspect the reservation's seqlock to double check if the fences have been reassigned as we were acquiring our reference. Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-9-chris@chris-wilson.co.uk
-
Chris Wilson authored
In order to be completely generic, we have to double check the read seqlock after acquiring a reference to the fence. If the driver is allocating fences from a SLAB_DESTROY_BY_RCU, or similar freelist, then within an RCU grace period a fence may be freed and reallocated. The RCU read side critical section does not prevent this reallocation, instead we have to inspect the reservation's seqlock to double check if the fences have been reassigned as we were acquiring our reference. Signed-off-by:
-
Chris Wilson authored
In order to be completely generic, we have to double check the read seqlock after acquiring a reference to the fence. If the driver is allocating fences from a SLAB_DESTROY_BY_RCU, or similar freelist, then within an RCU grace period a fence may be freed and reallocated. The RCU read side critical section does not prevent this reallocation, instead we have to inspect the reservation's seqlock to double check if the fences have been reassigned as we were acquiring our reference. Signed-off-by:
-
Chris Wilson authored
This variant of fence_get_rcu() takes an RCU protected pointer to a fence and carefully returns a reference to the fence ensuring that it is not reallocated as it does. This is required when mixing fences and SLAB_DESTROY_BY_RCU - although it serves a more pedagogical function atm Signed-off-by:
-
Chris Wilson authored
Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not need to handle such conversion in the caller. The only challenge are those callers that wish to differentiate the error code between the nonblocking busy check and potentially blocking wait. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
-
Chris Wilson authored
Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not need to handle such conversion in the caller. The only challenge are those callers that wish to differentiate the error code between the nonblocking busy check and potentially blocking wait. Signed-off-by:
-
Chris Wilson authored
Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not need to handle such conversion in the caller. The only challenge are those callers that wish to differentiate the error code between the nonblocking busy check and potentially blocking wait. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Chris Wilson authored
Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not need to handle such conversion in the caller. The only challenge are those callers that wish to differentiate the error code between the nonblocking busy check and potentially blocking wait. Signed-off-by:
-
- 10 Oct, 2016 7 commits
-
-
Jani Nikula authored
Signed-off-by:
-
Grazvydas Ignotas authored
There is no late_unregister(), it looks like the comment meant late_register(). Also fix a typo while at it. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
We should use 'ida_simple_remove()' instead of 'ida_remove()' when freeing resources allocated with 'ida_simple_get()'. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Chris Wilson authored
I hit send before completing a make htmldoc, and lo I forgot to fix up the cut'n'paste. Fixes: a4fce9cb ("drm/prime: Take a ref on the drm_dev when exporting...") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Marek Vasut authored
Drop unneeded drm_connector_unregister() and remove the unnecessary wrapper functions around drm_connector_cleanup(). Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Stefan Christ authored
Fix invalid sphinx markup in the comment for the newly added DRM_FB_HELPER_DEFAULT_OPS. Signed-off-by:
Stefan Christ <contact@stefanchrist.eu> Signed-off-by:
-
Maxime Ripard authored
Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
-
- 05 Oct, 2016 5 commits
-
-
Chris Wilson authored
dma_buf may live a long time, longer than the last direct user of the driver. We already hold a reference to the owner module (that prevents the object code from disappearing), but there is no reference to the drm_dev - so the pointers to the driver backend themselves may vanish. v2: Resist temptation to fix the bug in armada_gem.c not setting the correct flags on the exported dma-buf (it should pass the flags through and not be arbitrarily setting O_RDWR). Use a common wrapper for exporting the dmabuf and acquiring the reference to the drm_device. Testcase: igt/vgem_basic/unload Suggested-by:
Petri Latvala <petri.latvala@intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Chris Wilson authored
dma_buf_export() adds a reference to the owning module to the dmabuf (to prevent the driver from being unloaded whilst a third party still refers to the dmabuf). However, drm_gem_prime_export() was passing its own THIS_MODULE (i.e. drm.ko) rather than the driver. Extract the right owner from the device->fops instead. v2: Use C99 initializers to zero out unset elements of dma_buf_export_info v3: Extract the right module from dev->fops. Testcase: igt/vgem_basic/unload Reported-by:
-
Marek Vasut authored
Remove the unnecessary wrapper functions around drm_connector_cleanup(). Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Marek Vasut authored
Add .prepare_fb and .cleanup_fb plane hooks into the drm_simple_kms. These can be used by drivers to call ie. the drm_fb_cma_setup_fence() helper. Signed-off-by:
-
Christophe JAILLET authored
We should use 'ida_simple_remove()' instead of 'ida_remove()' when freeing resources allocated with 'ida_simple_get()'. This as been spotted with the following coccinelle script which tries to detect missing 'ida_simple_remove()' call in error handling paths. /////////////// @@ expression x; identifier l; @@ * x = ida_simple_get(...); ... if (...) { ... } ... if (...) { ... goto l; } ... * l: ... when != ida_simple_remove(...); Signed-off-by:
-
- 04 Oct, 2016 11 commits
-
-
Tomeu Vizoso authored
There's no point in enabling PSR when the panel doesn't support it. This also avoids a problem when PSR gets enabled when a CRTC is being disabled, because sometimes in that situation the DSP_HOLD_VALID_INTR interrupt on which we wait will never arrive. This was observed on RK3288 with a panel without PSR (veyron-jaq Chromebook). It's very easy to reproduce by running the kms_rmfb test in IGT a few times. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Tomeu Vizoso authored
So users know whether PSR should be enabled or not. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by:
-
Stefan Christ authored
The define DRM_FB_HELPER_DEFAULT_OPS provides the drm_fb_helper default implementations for functions in struct fb_ops. A drm driver can use it like: static struct fb_ops drm_fbdev_cma_ops = { .owner = THIS_MODULE, DRM_FB_HELPER_DEFAULT_OPS, /* driver specific implementations */ }; Suggested-by:Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
It's not that obvious how a driver can all race the atomic commit with handling the completion event. And there's unfortunately a pile of drivers with rather bad event handling which misdirect people into the wrong direction. Try to remedy this by documenting everything better. v2: Type fixes Alex spotted. v3: More typos Alex spotted. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475229896-6047-1-git-send-email-daniel.vetter@ffwll.ch
-
Emilio López authored
As part of the sync framework destaging, the sync_file.h header was moved, but an entry was not added on Kbuild to install it. This patch resolves this omission so that "make headers_install" installs this header. Fixes: 460bfc41 ("dma-buf/sync_file: de-stage sync_file headers") Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by:
-
Joe Perches authored
Remove function name and special " *ERROR*" from argument list $ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected) text data bss dec hex filename 5635366 182579 14328 5832273 58fe51 drivers/gpu/drm/built-in.o.new 5779552 182579 14328 5976459 5b318b drivers/gpu/drm/built-in.o.old Using "%ps", __builtin_return_address(0) is the same as "%s", __func__ except for static inlines, but it's more or less the same output. Miscellanea: o Convert args... to ##__VA_ARGS__ o The equivalent DRM_DEV_<FOO> macros are rarely used and not worth conversion Reviewed-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Ville Syrjälä authored
It's perfectly legal for the sink to support 12bpc only for some lower resolution modes, while the higher resolution modes can only be used with 8bpc. So let's take the sink's max TMDS clock into account before we go and decide that a particular mode can be used with 12bpc. Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Reduce the eyesore with a local variable. Signed-off-by:
-
Ville Syrjälä authored
drm_edid_to_eld() is just mean to cook up the ELD for the audio driver, so having it parse non-audio related stuff seems just wrong, and potentially could lead to that information not being even filled out if the function doesn't even get called. Let's move that stuff to the place where we parse the color formats and whatnot from the CEA ext block. Signed-off-by:
-
Ville Syrjälä authored
It's not a good idea to leave stale cea_rev in the drm_display_info. The current EDID might not even have a CEA ext block in which case we'd end up leaving the stale value in place. Signed-off-by:
-
Ville Syrjälä authored
Instead of parsing parts of the CEA extension block in two places to determine supported color formats and whatnot, let's just consolidate it to one function. This also makes it possible to neatly flatten drm_assign_hdmi_deep_color_info(). Signed-off-by:
-
