Skip to content

L
linux
Switch branch/tag
  1. 06 Feb, 2013 18 commits
    • Chris Wilson's avatar
      drm/i915; Only increment the user-pin-count after successfully pinning the bo · 87ae8984
      Chris Wilson authored 
      commit 93be8788 upstream.

As along the error path we do not correct the user pin-count for the
failure, we may end up with userspace believing that it has a pinned
object at offset 0 (when interrupted by a signal for example).
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      87ae8984
    • Shuah Khan's avatar
      ioat: Fix DMA memory sync direction correct flag · 0310953f
      Shuah Khan authored 
      commit ac498987 upstream.

ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated
for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug.
Fixed the dma_sync_single_for_device() call to use the correct direction.

[  226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550()
[  226.288948] Hardware name: ProLiant DL380p Gen8
[  226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE]
[  226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod
[  226.288967] Pid: 1055, comm: work_for_cpu Tainted: G        W    3.3.0-0.20.el7.x86_64 #1
[  226.288968] Call Trace:
[  226.288974]  [<ffffffff810644cf>] warn_slowpath_common+0x7f/0xc0
[  226.288977]  [<ffffffff810645c6>] warn_slowpath_fmt+0x46/0x50
[  226.288980]  [<ffffffff81345502>] check_sync+0x132/0x550
[  226.288983]  [<ffffffff81345c9f>] debug_dma_sync_single_for_device+0x3f/0x50
[  226.288988]  [<ffffffff81661002>] ? wait_for_common+0x72/0x180
[  226.288995]  [<ffffffffa019590f>] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma]
[  226.288999]  [<ffffffff811a5739>] ? kfree+0x259/0x270
[  226.289004]  [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma]
[  226.289008]  [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma]
[  226.289011]  [<ffffffffa0195f51>] ioat3_dma_probe+0x1d5/0x2aa [ioatdma]
[  226.289016]  [<ffffffffa0194d12>] ioat_pci_probe+0x139/0x17c [ioatdma]
[  226.289020]  [<ffffffff81354b8c>] local_pci_probe+0x5c/0xd0
[  226.289023]  [<ffffffff81083e50>] ? destroy_work_on_stack+0x20/0x20
[  226.289025]  [<ffffffff81083e68>] do_work_for_cpu+0x18/0x30
[  226.289029]  [<ffffffff8108d997>] kthread+0xb7/0xc0
[  226.289033]  [<ffffffff8166cef4>] kernel_thread_helper+0x4/0x10
[  226.289036]  [<ffffffff81662d20>] ? _raw_spin_unlock_irq+0x30/0x50
[  226.289038]  [<ffffffff81663234>] ? retint_restore_args+0x13/0x13
[  226.289041]  [<ffffffff8108d8e0>] ? kthread_worker_fn+0x1a0/0x1a0
[  226.289044]  [<ffffffff8166cef0>] ? gs_change+0x13/0x13
[  226.289045] ---[ end trace e1618afc7a606089 ]---
[  226.289047] Mapped at:
[  226.289048]  [<ffffffff81345307>] debug_dma_map_page+0x87/0x150
[  226.289050]  [<ffffffffa019653c>] dma_map_page.constprop.18+0x70/0xb34 [ioatdma]
[  226.289054]  [<ffffffffa0195702>] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma]
[  226.289058]  [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma]
[  226.289061]  [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma]
Signed-off-by: default avatarShuah Khan <shuah.khan@hp.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      0310953f
    • Mark Brown's avatar
      ASoC: wm2000: Fix sense of speech clarity enable · 7a0cdb8e
      Mark Brown authored 
      commit 267f8fa2 upstream.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      7a0cdb8e
    • Bing Zhao's avatar
      mwifiex: check wait_event_interruptible return value · 8a00cb48
      Bing Zhao authored 
      commit 9c969d8c upstream.

wait_event_interruptible function returns -ERESTARTSYS if it's
interrupted by a signal. Driver should check the return value
and handle this case properly.

In mwifiex_wait_queue_complete() routine, as we are now checking
wait_event_interruptible return value, the condition check is not
required. Also, we have removed mwifiex_cancel_pending_ioctl()
call to avoid a chance of sending second command to FW by other path
as soon as we clear current command node. FW can not handle two
commands simultaneously.
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      8a00cb48
    • Amitkumar Karwar's avatar
      mwifiex: handle association failure case correctly · 0f855d47
      Amitkumar Karwar authored 
      commit b7097eb7 upstream.

Currently even if association is failed "iw link" shows some
information about connected BSS and "Tx timeout" error is seen in
dmesg log.

This patch fixes below issues in the code to handle assoc failure
case correctly.
1) "status" variable in mwifiex_wait_queue_complete() is not
correctly updated. Hence driver doesn't inform cfg80211 stack
about association failure.
2) During association network queues are stopped but carrier is
not cleared, which gives Tx timeout error in failure case
Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      0f855d47
    • Mark Brown's avatar
      ASoC: wm5100: Remove DSP B and left justified formats · 336c24e2
      Mark Brown authored 
      commit 5f960294 upstream.

These are not supported
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      336c24e2
    • Sarah Sharp's avatar
      xhci: Avoid "dead ports", add roothub port polling. · da4fa01c
      Sarah Sharp authored 
      commit c52804a4 upstream.

The USB core hub thread (khubd) is designed with external USB hubs in
mind.  It expects that if a port status change bit is set, the hub will
continue to send a notification through the hub status data transfer.
Basically, it expects hub notifications to be level-triggered.

The xHCI host controller is designed to be edge-triggered on the logical
'OR' of all the port status change bits.  When all port status change
bits are clear, and a new change bit is set, the xHC will generate a
Port Status Change Event.  If another change bit is set in the same port
status register before the first bit is cleared, it will not send
another event.

This means that the hub code may lose port status changes because of
race conditions between clearing change bits.  The user sees this as a
"dead port" that doesn't react to device connects.

The fix is to turn on port polling whenever a new change bit is set.
Once the USB core issues a hub status request that shows that no change
bits are set in any USB ports, turn off port polling.

We can't allow the USB core to poll the roothub for port events during
host suspend because if the PCI host is in D3cold, the port registers
will be all f's.  Instead, stop the port polling timer, and
unconditionally restart it when the host resumes.  If there are no port
change bits set after the resume, the first call to hub_status_data will
disable polling.

This patch should be backported to stable kernels with the first xHCI
support, 2.6.31 and newer, that include the commit
0f2a7930 "USB: xhci: Root hub support."
There will be merge conflicts because the check for HC_STATE_SUSPENDED
was moved into xhci_suspend in 3.8.
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      da4fa01c
    • Sarah Sharp's avatar
      USB: Handle warm reset failure on empty port. · c135dc2e
      Sarah Sharp authored 
      commit 65bdac5e upstream.

An empty port can transition to either Inactive or Compliance Mode if a
newly connected USB 3.0 device fails to link train.  In that case, we
issue a warm reset.  Some devices, such as John's Roseweil eusb3
enclosure, slip back into Compliance Mode after the warm reset.

The current warm reset code does not check for device connect status on
warm reset completion, and it incorrectly reports the warm reset
succeeded.  This causes the USB core to attempt to send a Set Address
control transfer to a port in Compliance Mode, which will always fail.

Make hub_port_wait_reset check the current connect status and link state
after the warm reset completes.  Return a failure status if the device
is disconnected or the link state is Compliance Mode or SS.Inactive.

Make hub_events disable the port if warm reset fails.  This will disable
the port, and then bring it back into the RxDetect state.  Make the USB
core ignore the connect change until the device reconnects.

Note that this patch does NOT handle connected devices slipping into the
Inactive state very well.  This is a concern, because devices can go
into the Inactive state on U1/U2 exit failure.  However, the fix for
that case is too large for stable, so it will be submitted in a separate
patch.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72 "usbcore: refine warm
reset logic"
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarJohn Covici <covici@ccs.covici.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      c135dc2e
    • Sarah Sharp's avatar
      USB: Ignore port state until reset completes. · 340eb6fe
      Sarah Sharp authored 
      commit 4f43447e upstream.

The port reset code bails out early if the current connect status is
cleared (device disconnected).  If we're issuing a hot reset, it may
also look at the link state before the reset is finished.

Section 10.14.2.6 of the USB 3.0 spec says that when a port enters the
Error state or Resetting state, the port connection bit retains the
value from the previous state.  Therefore we can't trust it until the
reset finishes.  Also, the xHCI spec section 4.19.1.2.5 says software
shall ignore the link state while the port is resetting, as it can be in
an unknown state.

The port state during reset is also unknown for USB 2.0 hubs.  The hub
sends a reset signal by driving the bus into an SE0 state.  This
overwhelms the "connect" signal from the device, so the port can't tell
whether anything is connected or not.

Fix the port reset code to ignore the port link state and current
connect bit until the reset finishes, and USB_PORT_STAT_RESET is
cleared.

Remove the check for USB_PORT_STAT_C_BH_RESET in the warm reset case,
because it's redundant.  When the warm reset finishes, the port reset
bit will be cleared at the same time USB_PORT_STAT_C_BH_RESET is set.
Remove the now-redundant check for a cleared USB_PORT_STAT_RESET bit
in the code to deal with the finished reset.

This patch should be backported to all stable kernels.
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      340eb6fe
    • Sarah Sharp's avatar
      USB: Increase reset timeout. · fbac94c5
      Sarah Sharp authored 
      commit 77c7f072 upstream.

John's NEC 0.96 xHCI host controller needs a longer timeout for a warm
reset to complete.  The logs show it takes 650ms to complete the warm
reset, so extend the hub reset timeout to 800ms to be on the safe side.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72 "usbcore: refine
warm reset logic".
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarJohn Covici <covici@ccs.covici.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      fbac94c5
    • Sarah Sharp's avatar
      USB: Allow USB 3.0 ports to be disabled. · 8f2c189d
      Sarah Sharp authored 
      commit 41e7e056 upstream.

If hot and warm reset fails, or a port remains in the Compliance Mode,
the USB core needs to be able to disable a USB 3.0 port.  Unlike USB 2.0
ports, once the port is placed into the Disabled link state, it will not
report any new device connects.  To get device connect notifications, we
need to put the link into the Disabled state, and then the RxDetect
state.

The xHCI driver needs to atomically clear all change bits on USB 3.0
port disable, so that we get Port Status Change Events for future port
changes.  We could technically do this in the USB core instead of in the
xHCI roothub code, since the port state machine can't advance out of the
disabled state until we set the link state to RxDetect.  However,
external USB 3.0 hubs don't need this code.  They are level-triggered,
not edge-triggered like xHCI, so they will continue to send interrupt
events when any change bit is set.  Therefore it doesn't make sense to
put this code in the USB core.

This patch is part of a series to fix several reports of infinite loops
on device enumeration failure.  This includes John, when he boots with
a USB 3.0 device (Roseweil eusb3 enclosure) attached to his NEC 0.96
host controller.  The fix requires warm reset support, so it does not
make sense to backport this patch to stable kernels without warm reset
support.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72 "usbcore: refine warm
reset logic"
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarJohn Covici <covici@ccs.covici.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      8f2c189d
    • Sarah Sharp's avatar
      USB: Ignore xHCI Reset Device status. · 6cee667e
      Sarah Sharp authored 
      commit 8b8132bc upstream.

When the USB core finishes reseting a USB device, the xHCI driver sends
a Reset Device command to the host.  The xHC then updates its internal
representation of the USB device to the 'Default' device state.  If the
device was already in the Default state, the xHC will complete the
command with an error status.

If a device needs to be reset several times during enumeration, the
second reset will always fail because of the xHCI Reset Device command.
This can cause issues during enumeration.

For example, usb_reset_and_verify_device calls into hub_port_init in a
loop.  Say that on the first call into hub_port_init, the device is
successfully reset, but doesn't respond to several set address control
transfers.  Then the port will be disabled, but the udev will remain in
tact.  usb_reset_and_verify_device will call into hub_port_init again.

On the second call into hub_port_init, the device will be reset, and the
xHCI driver will issue a Reset Device command.  This command will fail
(because the device is already in the Default state), and
usb_reset_and_verify_device will fail.  The port will be disabled, and
the device won't be able to enumerate.

Fix this by ignoring the return value of the HCD reset_device callback.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72 "usbcore: refine
warm reset logic".
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      6cee667e
    • Sarah Sharp's avatar
      USB: Handle auto-transition from hot to warm reset. · 330a5270
      Sarah Sharp authored 
      commit 1c7439c6 upstream.

USB 3.0 hubs and roothubs will automatically transition a failed hot
reset to a warm (BH) reset.  In that case, the warm reset change bit
will be set, and the link state change bit may also be set.  Change
hub_port_finish_reset to unconditionally clear those change bits for USB
3.0 hubs.  If these bits are not cleared, we may lose port change events
from the roothub.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72 "usbcore: refine
warm reset logic".
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      330a5270
    • Sarah Sharp's avatar
      xhci: Handle HS bulk/ctrl endpoints that don't NAK. · 4a2b6c95
      Sarah Sharp authored 
      commit 55c1945e upstream.

A high speed control or bulk endpoint may have bInterval set to zero,
which means it does not NAK.  If bInterval is non-zero, it means the
endpoint NAKs at a rate of 2^(bInterval - 1).

The xHCI code to compute the NAK interval does not handle the special
case of zero properly.  The current code unconditionally subtracts one
from bInterval and uses it as an exponent.  This causes a very large
bInterval to be used, and warning messages like these will be printed:

usb 1-1: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes

This may cause the xHCI host hardware to reject the Configure Endpoint
command, which means the HS device will be unusable under xHCI ports.

This patch should be backported to kernels as old as 2.6.31, that contain
commit dfa49c4a "USB: xhci - fix math in
xhci_get_endpoint_interval()".
Reported-by: default avatarVincent Pelletier <plr.vincent@gmail.com>
Suggested-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      4a2b6c95
    • Johannes Berg's avatar
      mac80211: use del_timer_sync for final sta cleanup timer deletion · ac2c3982
      Johannes Berg authored 
      commit a56f992c upstream.

This is a very old bug, but there's nothing that prevents the
timer from running while the module is being removed when we
only do del_timer() instead of del_timer_sync().

The timer should normally not be running at this point, but
it's not clearly impossible (or we could just remove this.)
Tested-by: default avatarBen Greear <greearb@candelatech.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      ac2c3982
    • Alexander Graf's avatar
      virtio-blk: Don't free ida when disk is in use · 63dddb49
      Alexander Graf authored 
      commit f4953fe6 upstream.

When a file system is mounted on a virtio-blk disk, we then remove it
and then reattach it, the reattached disk gets the same disk name and
ids as the hot removed one.

This leads to very nasty effects - mostly rendering the newly attached
device completely unusable.

Trying what happens when I do the same thing with a USB device, I saw
that the sd node simply doesn't get free'd when a device gets forcefully
removed.

Imitate the same behavior for vd devices. This way broken vd devices
simply are never free'd and newly attached ones keep working just fine.
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
Signed-off-by: default avatarRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      63dddb49
    • Sergei Shtylyov's avatar
      usb: musb: core: print new line in the driver banner again · 9d38cd59
      Sergei Shtylyov authored 
      commit 2ac788f7 upstream.

Commit 5c8a86e1 (usb: musb: drop unneeded
musb_debug trickery) erroneously removed '\n' from the driver's banner.
Concatenate all the banner substrings while adding it back...
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      9d38cd59
    • Sebastian Andrzej Siewior's avatar
      usb: gadget: dummy: fix enumeration with g_multi · 7cce8398
      Sebastian Andrzej Siewior authored 
      commit 1d16638e upstream.

If we do have endpoints named like "ep-a" then bEndpointAddress is
counted internally by the gadget framework.

If we do have endpoints named like "ep-1" then bEndpointAddress is
assigned from the digit after "ep-".

If we do have both, then it is likely that after we used up the
"generic" endpoints we will use the digits and thus assign one
bEndpointAddress to multiple endpoints.

This theory can be proofed by using the completely enabled g_multi.
Without this patch, the mass storage won't enumerate and times out
because it shares endpoints with RNDIS.

This patch also adds fills up the endpoints list so we have in total
endpoints 1 to 15 in + out available while some of them are restricted
to certain types like BULK or ISO. Without this change the nokia gadget
won't load because the system does not provide enough (BULK) endpoints
but it did before ep-a - ep-f were removed.
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      7cce8398
  3. 16 Jan, 2013 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7