- 10 May, 2018 27 commits
-
-
Adi Nissim authored
The host side reporting of VF vport statistics didn't include the VF RDMA traffic. Fixes: 3b751a2a ("net/mlx5: E-Switch, Introduce get vf statistics") Signed-off-by:
Adi Nissim <adin@mellanox.com> Reported-by:
Ariel Almog <ariela@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Daniel Jurgens authored
Some platforms require IRQs to be free'd in the shutdown path. Otherwise they will fail to be reallocated after a kexec. Fixes: 8812c24d ("net/mlx5: Add fast unload support in shutdown flow") Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.17-20180510' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request for net/master consisting of 2 patches. Both patches are from Lukas Wunner and fix two problems found in the hi311x CAN driver under high load situations. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in DP_VERBOSE message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Xin Long authored
In Commit 1f45f78f ("sctp: allow GSO frags to access the chunk too"), it held the chunk in sctp_ulpevent_make_rcvmsg to access it safely later in recvmsg. However, it also added sctp_chunk_put in fail_mark err path, which is only triggered before holding the chunk. syzbot reported a use-after-free crash happened on this err path, where it shouldn't call sctp_chunk_put. This patch simply removes this call. Fixes: 1f45f78f ("sctp: allow GSO frags to access the chunk too") Reported-by: syzbot+141d898c5f24489db4aa@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
If an error occurs, 'mlx4_en_destroy_netdev()' is called. It then calls 'mlx4_en_free_resources()' which does the needed resources cleanup. So, doing some explicit kfree in the error handling path would lead to some double kfree. Simplify code to avoid such a case. Fixes: 67f8b1dc ("net/mlx4_en: Refactor the XDP forwarding rings scheme") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Stephen Hemminger authored
The hyper-v transparent bonding should have used master_dev_link. The netvsc device should look like a master bond device not like the upper side of a tunnel. This makes the semantics the same so that userspace applications looking at network devices see the correct master relationshipship. Fixes: 0c195567 ("netvsc: transparent VF management") Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2018-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We only have a few fixes this time: * WMM element validation * SAE timeout * add-BA timeout * docbook parsing * a few memory leaks in error paths ==================== Signed-off-by:
-
Eric Dumazet authored
sysbot/KMSAN reported an uninit-value in recvmsg() that I tracked down to tipc_sk_set_orig_addr(), missing srcaddr->member.scope initialization. This patches moves srcaddr->sock.scope init to follow fields order and ease future verifications. BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:226 CPU: 0 PID: 4549 Comm: syz-executor287 Not tainted 4.17.0-rc3+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:226 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2285 __sys_recvmsg net/socket.c:2328 [inline] __do_sys_recvmsg net/socket.c:2338 [inline] __se_sys_recvmsg net/socket.c:2335 [inline] __x64_sys_recvmsg+0x325/0x460 net/socket.c:2335 do_syscall_64+0x154/0x220 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4455e9 RSP: 002b:00007fe3bd36ddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 00000000004455e9 RDX: 0000000000002002 RSI: 0000000020000400 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff98ce4b6f R14: 00007fe3bd36e9c0 R15: 0000000000000003 Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xd5/0x810 net/socket.c:2246 __sys_recvmsg net/socket.c:2328 [inline] __do_sys_recvmsg net/socket.c:2338 [inline] __se_sys_recvmsg net/socket.c:2335 [inline] __x64_sys_recvmsg+0x325/0x460 net/socket.c:2335 Byte 19 of 32 is uninitialized Fixes: 31c82a2d ("tipc: add second source address to recvmsg()/recvfrom()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Davide Caratti authored
- correct a typo in the value of 'matchPattern' of test 282d, potentially causing false negative - allow errors when 'teardown' executes '$TC action flush action bpf' in test 282d, to fix false positive when it is run with act_bpf unloaded - correct the value of 'matchPattern' in test e939, causing false positive in case the BPF JIT is enabled Fixes: 440ea4ae ("tc-testing: add selftests for 'bpf' action") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Moshe Shemesh authored
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx4 modify cq limits the coalescing time parameter and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Change type of sample-interval and adaptive_rx_coal parameters in mlx4 driver to u32 as the ethtool holds them as u32 and these parameters are not limited due to mlx4 HW. Fixes: c27a02cd ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Ganesh Goudar authored
copy mbox size to adapter instances of PF0-3 to avoid mbox log overflow. This fixes the possible protection fault. Fixes: baf50868 ("cxgb4: restructure VF mgmt code") Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
firmware expects HMA memory to be zeroed, use __GFP_ZERO for HMA memory allocation. Fixes: 8b4e6b3c ("cxgb4: Add HMA support") Signed-off-by:
-
Paolo Abeni authored
Damir reported a breakage of SO_BINDTODEVICE for UDP sockets. In absence of VRF devices, after commit fb74c277 ("net: ipv4: add second dif to udp socket lookups") the dif mismatch isn't fatal anymore for UDP socket lookup with non null sk_bound_dev_if, breaking SO_BINDTODEVICE semantics. This changeset addresses the issue making the dif match mandatory again in the above scenario. Reported-by:
Damir Mansurov <dnman@oktetlabs.ru> Fixes: fb74c277 ("net: ipv4: add second dif to udp socket lookups") Fixes: 1801b570 ("net: ipv6: add second dif to udp socket lookups") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Hangbin Liu authored
After route cache is flushed via ipv4_sysctl_rtcache_flush(), we forget to reset fnhe_mtu_locked in rt_bind_exception(). When pmtu is updated in __ip_rt_update_pmtu(), it will return directly since the pmtu is still locked. e.g. + ip netns exec client ping 10.10.1.1 -c 1 -s 1400 -M do PING 10.10.1.1 (10.10.1.1) 1400(1428) bytes of data. >From 10.10.0.254 icmp_seq=1 Frag needed and DF set (mtu = 0) Signed-off-by: -
Mohammed Gamal authored
On older windows hosts the net_device instance is returned to the caller of rndis_filter_device_add() without having the presence bit set first. This would cause any subsequent calls to network device operations (e.g. MTU change, channel change) to fail after the device is detached once, returning -ENODEV. Instead of returning the device instabce, we take the exit path where we call netif_device_attach() Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Signed-off-by:
Mohammed Gamal <mgamal@redhat.com> Reviewed-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Pieter Jansen van Vuuren authored
Since commit 29a5dcae ("nfp: flower: offload phys port MTU change") we take encapsulation headroom into account when calculating the max allowed MTU. This is unnecessary as the max MTU advertised by firmware should have already accounted for encap headroom. Subtracting headroom twice brings the max MTU below what's necessary for some deployments. Fixes: 29a5dcae ("nfp: flower: offload phys port MTU change") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_warn message text Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in error string Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in res_strings string array Signed-off-by:
-
David S. Miller authored
Michal Kalderon says: ==================== qed*: Rdma fixes This patch series include two fixes for bugs related to rdma. The first has to do with loading the driver over an iWARP device. The second fixes a previous commit that added proper link indication for iWARP / RoCE. ==================== Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
-
Michal Kalderon authored
A previous commit 4609adc2 ("qede: Fix qedr link update") added a flow that could allocate rdma event objects from an interrupt path (link notification). Therefore the kzalloc call should be done with GFP_ATOMIC. fixes: 4609adc2 ("qede: Fix qedr link update") Signed-off-by:
-
Michal Kalderon authored
If qede driver was loaded on a device configured for iWARP the l2 mutex wouldn't be allocated, and some l2 related resources wouldn't be freed. fixes: c851a9dc ("qed: Introduce iWARP personality") Signed-off-by:
-
Lukas Wunner authored
When sending packets as fast as possible using "cangen -g 0 -i -x", the HI-3110 occasionally latches the interrupt pin high on completion of a packet, but doesn't set the TXCPLT bit in the INTF register. The INTF register contains 0x00 as if no interrupt has occurred. Even waiting for a few milliseconds after the interrupt doesn't help. Work around this apparent erratum by instead checking the TXMTY bit in the STATF register ("TX FIFO empty"). We know that we've queued up a packet for transmission if priv->tx_len is nonzero. If the TX FIFO is empty, transmission of that packet must have completed. Note that this is congruent with our handling of received packets, which likewise gleans from the STATF register whether a packet is waiting in the RX FIFO, instead of looking at the INTF register. Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:Lukas Wunner <lukas@wunner.de> Acked-by:
Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Lukas Wunner authored
hi3110_get_berr_counter() may run concurrently to the rest of the driver but neglects to acquire the lock protecting access to the SPI device. As a result, it and the rest of the driver may clobber each other's tx and rx buffers. We became aware of this issue because transmission of packets with "cangen -g 0 -i -x" frequently hung. It turns out that agetty executes ->do_get_berr_counter every few seconds via the following call stack: CPU: 2 PID: 1605 Comm: agetty [<7f3f7500>] (hi3110_get_berr_counter [hi311x]) [<7f130204>] (can_fill_info [can_dev]) [<80693bc0>] (rtnl_fill_ifinfo) [<806949ec>] (rtnl_dump_ifinfo) [<806b4834>] (netlink_dump) [<806b4bc8>] (netlink_recvmsg) [<8065f180>] (sock_recvmsg) [<80660f90>] (___sys_recvmsg) [<80661e7c>] (__sys_recvmsg) [<80661ec0>] (SyS_recvmsg) [<80108b20>] (ret_fast_syscall+0x0/0x1c) agetty listens to netlink messages in order to update the login prompt when IP addresses change (if /etc/issue contains \4 or \6 escape codes): https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/?id=e36deb6424e8 It's a useful feature, though it seems questionable that it causes CAN bit error statistics to be queried. Be that as it may, if hi3110_get_berr_counter() is invoked while a frame is sent by hi3110_hw_tx(), bogus SPI transfers like the following may occur: => 12 00 (hi3110_get_berr_counter() wanted to transmit EC 00 to query the transmit error counter, but the first byte was overwritten by hi3110_hw_tx_frame()) => EA 00 3E 80 01 FB (hi3110_hw_tx_frame() wanted to transmit a frame, but the first byte was overwritten by hi3110_get_berr_counter() because it wanted to query the receive error counter) This sequence hangs the transmission because the driver believes it has sent a frame and waits for the interrupt signaling completion, but in reality the chip has never sent away the frame since the commands it received were malformed. Fix by acquiring the SPI lock in hi3110_get_berr_counter(). I've scrutinized the entire driver for further unlocked SPI accesses but found no others. Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Cc: Stef Walter <stefw@redhat.com> Cc: Karel Zak <kzak@redhat.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: -
Ying Xue authored
When we get link properties through netlink interface with tipc_nl_node_get_link(), we don't validate TIPC_NLA_LINK_NAME attribute at all, instead we directly use it. As a consequence, KMSAN detected the TIPC_NLA_LINK_NAME attribute was an uninitialized value, and then posted the following complaint: ================================================================== BUG: KMSAN: uninit-value in strcmp+0xf7/0x160 lib/string.c:329 CPU: 1 PID: 4527 Comm: syz-executor655 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 strcmp+0xf7/0x160 lib/string.c:329 tipc_nl_node_get_link+0x220/0x6f0 net/tipc/node.c:1881 genl_family_rcv_msg net/netlink/genetlink.c:599 [inline] genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447 genl_rcv+0x63/0x80 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x445589 RSP: 002b:00007fb7ee66cdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 0000000000445589 RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffa2bf3f3f R14: 00007fb7ee66d9c0 R15: 0000000000000001 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline] netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== To quiet the complaint, TIPC_NLA_LINK_NAME attribute has been validated in tipc_nl_node_get_link() before it's used. Reported-by: syzbot+df0257c92ffd4fcc58cd@syzkaller.appspotmail.com Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Sun Lianwen authored
There are follow comment errors: 1 The function name is wrong in p9_release_pages() comment. 2 The function name and variable name is wrong in p9_poll_workfn() comment. 3 There is no variable dm_mr and lkey in struct p9_trans_rdma. 4 The function name is wrong in rdma_create_trans() comment. 5 There is no variable initialized in struct virtio_chan. 6 The variable name is wrong in p9_virtio_zc_request() comment. Signed-off-by:
Sun Lianwen <sunlw.fnst@cn.fujitsu.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
- 09 May, 2018 1 commit
-
-
Heiner Kallweit authored
Since commit a92a0849 "r8169: improve runtime pm in general and suspend unused ports" interfaces w/o link are runtime-suspended after 10s. On systems where drivers take longer to load this can lead to the situation that the interface is runtime-suspended already when it's initially brought up. This shouldn't be a problem because rtl_open() resumes MAC/PHY. However with at least one chip version the interface doesn't properly come up, as reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199549 The vendor driver uses a delay to give certain chip versions some time to resume before starting the PHY configuration. So let's do the same. I don't know which chip versions may be affected, therefore apply this delay always. This patch was reported to fix the issue for RTL8168h. I was able to reproduce the issue on an Asus H310I-Plus which also uses a RTL8168h. Also in my case the patch fixed the issue. Reported-by:
Slava Kardakov <ojab@ojab.ru> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
- 08 May, 2018 12 commits
-
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.17-20180508' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-05-08 this is a pull request for 7 patches for net/master. The first patch is by Jakob Unterwurzacher and increases the severity of bus-off messages in the generic CAN device infrastructure. The next two patches are by Uwe Kleine-König and fix the endianess detection in the flexcan driver. Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov two patches for the rcan_canfd device tree binding description. ==================== Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 2018-05-08 An update from ieee802154 for your *net* tree. Two fixes for the mcr20a driver, which was being added in the 4.17 merge window, by Gustavo and myself. The atusb driver got a change to GFP_KERNEL where no GFP_ATOMIC is needed by Jia-Ju. The last and most important fix is from Alex to get IPv6 reassembly working again for the ieee802154 6lowpan adaptation. This got broken in 4.16 so please queue this one also up for the 4.16 stable tree. ==================== Signed-off-by:
-
Sergei Shtylyov authored
Document the R-Car V3H (R8A77980) SoC support in the R-Car CAN-FD bindings. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Sergei Shtylyov authored
Document the R-Car V3M (R8A77970) SoC support in the R-Car CAN-FD bindings. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by:
-
Geert Uytterhoeven authored
R8A7796 is R-Car M3-W. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Jimmy Assarsson authored
Increase rx_dropped, if alloc_can_skb() fails, not tx_dropped. Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
Commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") removed the fallback compatible "fsl,p1010-flexcan" from the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53 are identical, introduce the first as fallback for the two latter ones. Fixes: d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= v4.16 Signed-off-by:
-
Uwe Kleine-König authored
In commit 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.") the following logic was implemented: if the dt property "big-endian" is given or the device is compatible to "fsl,p1010-flexcan": use big-endian mode; else use little-endian mode; This relies on commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") which was applied a few commits later. Without this commit (or an old device tree used for booting a new kernel) the flexcan devices on i.MX25, i.MX28, i.MX35 and i.MX53 match the 'the device is compatible to "fsl,p1010-flexcan"' test and so are switched erroneously to big endian mode. Instead of the check above put a quirk in devtype data and rely on of_match_device yielding the most compatible match Fixes: 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.") Signed-off-by:
Gavin Schenk <g.schenk@eckelmann.de> Cc: linux-stable <stable@vger.kernel.org> # >= v4.16 Signed-off-by:
-
Jakob Unterwurzacher authored
bus-off is usually caused by hardware malfunction or configuration error (baud rate mismatch) and causes a complete loss of communication. Increase the "bus-off" message's severity from netdev_dbg() to netdev_info() to make it visible to the user. A can interface going into bus-off is similar in severity to ethernet's "Link is Down" message, which is also printed at info level. It is debatable whether the the "restarted" message should also be changed to netdev_info() to make the interface state changes comprehensible from the kernel log. I have chosen to keep the "restarted" message at dbg for now as the "bus-off" message should be enough for the user to notice and investigate the problem. Signed-off-by:
Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: linux-can@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Eric Dumazet authored
syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof. usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)! kernel BUG at mm/usercopy.c:100! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: 0018:ffff8801868bf800 EFLAGS: 00010282 RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000 RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6 RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0 R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0 R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0 FS: 00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602 Call Trace: check_bogus_address mm/usercopy.c:153 [inline] __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256 check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_from_iter_full include/linux/uio.h:121 [inline] memcpy_from_msg include/linux/skbuff.h:3305 [inline] llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018 RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000 Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8 RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David S. Miller authored
Igor Russkikh says: ==================== Aquantia various patches 2018-05 These are two patches covering issues found during test cycles: First is that driver should declare valid vlan_features Second fix is about correct allocation of MSI interrupts on some systems. ==================== Signed-off-by: -
Igor Russkikh authored
Driver should use pci_alloc_irq_vectors return value to correct number of allocated vectors and napi instances. Otherwise it'll panic later in pci_irq_vector. Driver also should allow more than one MSI vectors to be allocated. Error return path from pci_alloc_irq_vectors is also fixed to revert resources in a correct sequence when error happens. Reported-by:
Long, Nicholas <nicholas.a.long@baesystems.com> Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
