- 24 Nov, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: remove duplicated #include xen: x86/32: perform initial startup on initial_page_table
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: fix memchr() not to dereference memory for zero length arch/tile: make glibc's sysconf(_SC_NPROCESSORS_CONF) work correctly arch/tile: fix rwlock so would-be write lockers don't block new readers
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: pci root complex: support for tile architecture drivers/net/tile/: on-chip network drivers for the tile architecture MAINTAINERS: add drivers/char/hvc_tile.c as maintained by tile
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6482/2: Fix find_next_zero_bit and related assembly ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context ARM: avoid annoying <4>'s in printk output SCSI: arm fas216: fix missing ';' ARM: avoid marking decompressor .stack section as having contents ARM: 6489/1: thumb2: fix incorrect optimisation in usracc ARM: 6488/1: nomadik: prevent sched_clock() wraparound ARM: 6484/1: fix compile warning in mm/init.c ARM: 6473/1: Small update to ux500 specific L2 cache code ARM: improve compiler's ability to optimize page tables mx25: fix spi device registration typo ARM i.MX27 eukrea: Fix compilation ARM i.MX spi: fix compilation for i.MX21 ARM i.MX pcm037 eet: compile fixes ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGED ARM mx3fb: check for DMA engine type mach-pcm037_eet: Fix section mismatch for eet_init_devices()
-
Linus Torvalds authored
Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: sisfb: delete osdef.h sisfb: move the CONFIG warning to sis_main.c sisfb: replace SiS_SetMemory with memset_io sisfb: remove InPort/OutPort wrappers sisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315H sisfb: delete redudant #define SIS_LINUX_KERNEL sisfb: delete dead SIS_XORG_XF86 code sisfb: delete fallback code for pci_map_rom() sisfb: delete obsolete PCI ROM bug workaround fbdev: Update documentation index file. lxfb: Program panel v/h sync output polarity correctly fbcmap: integer overflow bug fbcmap: cleanup white space in fb_alloc_cmap() MAINTAINERS: Add fbdev patchwork entry, tidy up file patterns. fbdev: da8xx: punt duplicated FBIO_WAITFORVSYNC define fbdev: sh_mobile_lcdcfb: fix bug in reconfig()
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: clkfwk: Build fix for non-legacy CPG changes. sh: Use GCC __builtin_prefetch() to implement prefetch(). sh: fix vsyscall compilation due to .eh_frame issue sh: avoid to flush all cache in sys_cacheflush sh: clkfwk: Disable init clk op for non-legacy clocks. sh: clkfwk: Kill off now unused algo_id in set_rate op. sh: clkfwk: Kill off unused clk_set_rate_ex().
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: Call blk_queue_flush() to establish flush/fua support md/raid1: really fix recovery looping when single good device fails. md: fix return value of rdev_size_change()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: fix format of sysfs driver/vendor files Char: virtio_console, fix memory leak virtio: return correct capacity to users module: Update prototype for ref_module (formerly use_module)
-
Andrew Morton authored
When compiling arch/x86/kernel/early_printk_mrst.c with i386 allmodconfig, gcc-4.1.0 generates an out-of-line copy of __set_fixmap_offset() which contains a reference to __this_fixmap_does_not_exist which the compiler cannot elide. Marking __set_fixmap_offset() as __always_inline prevents this. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Feng Tang <feng.tang@intel.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
The recent changes to gfp.h to satisfy sparse broke scripts/gfp-translate. This patch fixes it up to work with old and new versions of gfp.h . [akpm@linux-foundation.org: use `grep -q', per WANG Cong] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Cc: Namhyung Kim <namhyung@gmail.com> Reviewed-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Frederic Weisbecker authored
reiserfs_unpack() locks the inode mutex with reiserfs_mutex_lock_safe() to protect against reiserfs lock dependency. However this protection requires to have the reiserfs lock to be locked. This is the case if reiserfs_unpack() is called by reiserfs_ioctl but not from reiserfs_quota_on() when it tries to unpack tails of quota files. Fix the ordering of the two locks in reiserfs_unpack() to fix this issue. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Reported-by:
Markus Gapp <markus.gapp@gmx.net> Reported-by:
Jan Kara <jack@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Cc: <stable@kernel.org> [2.6.36.x] Signed-off-by:
-
Uwe Kleine-König authored
According to the comment describing ops_lock in the definition of struct backlight_device and when comparing with other functions in backlight.c the mutex must be hold when checking ops to be non-NULL. Fixes a problem added by c835ee7f ("backlight: Add suspend/resume support to the backlight core") in Jan 2009. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Richard Purdie <rpurdie@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
Axel Lin authored
struct als_data *data is not used in this driver at all. Also add a missing ">" character for MODULE_AUTHOR. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Naoya Horiguchi authored
Currently one pagemap_read() call walks in PAGEMAP_WALK_SIZE bytes (== 512 pages.) But there is a corner case where walk_pmd_range() accidentally runs over a VMA associated with a hugetlbfs file. For example, when a process has mappings to VMAs as shown below: # cat /proc/<pid>/maps ... 3a58f6d000-3a58f72000 rw-p 00000000 00:00 0 7fbd51853000-7fbd51855000 rw-p 00000000 00:00 0 7fbd5186c000-7fbd5186e000 rw-p 00000000 00:00 0 7fbd51a00000-7fbd51c00000 rw-s 00000000 00:12 8614 /hugepages/test then pagemap_read() goes into walk_pmd_range() path and walks in the range 0x7fbd51853000-0x7fbd51a53000, but the hugetlbfs VMA should be handled by walk_hugetlb_range(). Otherwise PMD for the hugepage is considered bad and cleared, which causes undesirable results. This patch fixes it by separating pagemap walk range into one PMD. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
David Sterba authored
Commit d33b9f45 ("mm: hugetlb: fix hugepage memory leak in walk_page_range()") introduces a check if a vma is a hugetlbfs one and later in 5dc37642 ("mm hugetlb: add hugepage support to pagemap") it is moved under #ifdef CONFIG_HUGETLB_PAGE but a needless find_vma call is left behind and its result is not used anywhere else in the function. The side-effect of caching vma for @addr inside walk->mm is neither utilized in walk_page_range() nor in called functions. Signed-off-by:
David Sterba <dsterba@suse.cz> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Matt Mackall <mpm@selenic.com> Acked-by:
-
KAMEZAWA Hiroyuki authored
mm/page_alloc.c: fix build_all_zonelist() where percpu_alloc() is wrongly called under stop_machine_run() During memory hotplug, build_allzonelists() may be called under stop_machine_run(). In this function, setup_zone_pageset() is called. But it's bug because it will do page allocation under stop_machine_run(). Here is a report from Alok Kataria. BUG: sleeping function called from invalid context at kernel/mutex.c:94 in_atomic(): 0, irqs_disabled(): 1, pid: 4, name: migration/0 Pid: 4, comm: migration/0 Not tainted 2.6.35.6-45.fc14.x86_64 #1 Call Trace: [<ffffffff8103d12b>] __might_sleep+0xeb/0xf0 [<ffffffff81468245>] mutex_lock+0x24/0x50 [<ffffffff8110eaa6>] pcpu_alloc+0x6d/0x7ee [<ffffffff81048888>] ? load_balance+0xbe/0x60e [<ffffffff8103a1b3>] ? rt_se_boosted+0x21/0x2f [<ffffffff8103e1cf>] ? dequeue_rt_stack+0x18b/0x1ed [<ffffffff8110f237>] __alloc_percpu+0x10/0x12 [<ffffffff81465e22>] setup_zone_pageset+0x38/0xbe [<ffffffff810d6d81>] ? build_zonelists_node.clone.58+0x79/0x8c [<ffffffff81452539>] __build_all_zonelists+0x419/0x46c [<ffffffff8108ef01>] ? cpu_stopper_thread+0xb2/0x198 [<ffffffff8108f075>] stop_machine_cpu_stop+0x8e/0xc5 [<ffffffff8108efe7>] ? stop_machine_cpu_stop+0x0/0xc5 [<ffffffff8108ef57>] cpu_stopper_thread+0x108/0x198 [<ffffffff81467a37>] ? schedule+0x5b2/0x5cc [<ffffffff8108ee4f>] ? cpu_stopper_thread+0x0/0x198 [<ffffffff81065f29>] kthread+0x7f/0x87 [<ffffffff8100aae4>] kernel_thread_helper+0x4/0x10 [<ffffffff81065eaa>] ? kthread+0x0/0x87 [<ffffffff8100aae0>] ? kernel_thread_helper+0x0/0x10 Built 5 zonelists in Node order, mobility grouping on. Total pages: 289456 Policy zone: Normal This patch tries to fix the issue by moving setup_zone_pageset() out from stop_machine_run(). It's obviously not necessary to be called under stop_machine_run(). [akpm@linux-foundation.org: remove unneeded local] Reported-by:
Alok Kataria <akataria@vmware.com> Signed-off-by:
Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
-
Michal Hocko authored
Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP configuration option and then it is turned on by default. There is a boot option (noswapaccount) which can disable this feature. This makes it hard for distributors to enable the configuration option as this feature leads to a bigger memory consumption and this is a no-go for general purpose distribution kernel. On the other hand swap accounting may be very usuful for some workloads. This patch adds a new configuration option which controls the default behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED). If the option is selected then the feature is turned on by default. It also adds a new boot parameter swapaccount[=1|0] which enhances the original noswapaccount parameter semantic by means of enable/disable logic (defaults to 1 if no value is provided to be still consistent with noswapaccount). The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well) Signed-off-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Daisuke Nishimura authored
__mem_cgroup_try_charge() can be called under down_write(&mmap_sem)(e.g. mlock does it). This means it can cause deadlock if it races with move charge: Ex.1) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | down_write(&mmap_sem) mc.moving_task = current | .. mem_cgroup_precharge_mc() | __mem_cgroup_try_charge() mem_cgroup_count_precharge() | prepare_to_wait() down_read(&mmap_sem) | if (mc.moving_task) -> cannot aquire the lock | -> true | schedule() Ex.2) move charge | try charge --------------------------------------+------------------------------ mem_cgroup_can_attach() | mc.moving_task = current | mem_cgroup_precharge_mc() | mem_cgroup_count_precharge() | down_read(&mmap_sem) | .. | up_read(&mmap_sem) | | down_write(&mmap_sem) mem_cgroup_move_task() | .. mem_cgroup_move_charge() | __mem_cgroup_try_charge() down_read(&mmap_sem) | prepare_to_wait() -> cannot aquire the lock | if (mc.moving_task) | -> true | schedule() To avoid this deadlock, we do all the move charge works (both can_attach() and attach()) under one mmap_sem section. And after this patch, we set/clear mc.moving_task outside mc.lock, because we use the lock only to check mc.from/to. Signed-off-by: -
Samu Onkalo authored
Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by:
Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Samu Onkalo authored
Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by:
-
Samu Onkalo authored
Delays were little bit too long. Adjust delay times and add some comments to them. Signed-off-by:
-
Samu Onkalo authored
Delays were little bit too long. Adjust delay times and add some comments to them. Signed-off-by:
-
Samu Onkalo authored
A small macro changed to inline function to have proper type checking. Inline added to two similar small functions. Signed-off-by:
-
Samu Onkalo authored
Some small macros changed to inline functions to have proper type checking. Signed-off-by:
-
Ken Sumrall authored
The attribute cache for a file was not being cleared when a file is opened with O_TRUNC. If the filesystem's open operation truncates the file ("atomic_o_trunc" feature flag is set) then the kernel should invalidate the cached st_mtime and st_ctime attributes. Also i_size should be explicitly be set to zero as it is used sometimes without refreshing the cache. Signed-off-by:Ken Sumrall <ksumrall@android.com> Cc: Anfei <anfei.zhou@gmail.com> Cc: "Anand V. Avati" <avati@gluster.com> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by:
-
Robin@sgi.com authored
UV hardware defines 256 memory protection regions versus the baseline 64 with increasing size for the SN2 ia64. This was overlooked when XPC was modified to accomodate both UV and SN2. Without this patch, a user could reconfigure their existing system and suddenly disable cross-partition communications with no indication of what has gone wrong. It also prevents larger configurations from using cross-partition communication. Signed-off-by:
Robin Holt <holt@sgi.com> Cc: <stable@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
Fix this: kernel BUG at mm/memcontrol.c:2155! invalid opcode: 0000 [#1] last sysfs file: Pid: 18, comm: sh Not tainted 2.6.37-rc3 #3 /Bochs EIP: 0060:[<c10731b2>] EFLAGS: 00000246 CPU: 0 EIP is at mem_cgroup_move_account+0xe2/0xf0 EAX: 00000004 EBX: c6f931d4 ECX: c681c300 EDX: c681c000 ESI: c681c300 EDI: ffffffea EBP: c681c000 ESP: c46f3e30 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process sh (pid: 18, ti=c46f2000 task=c6826e60 task.ti=c46f2000) Stack: 00000155 c681c000 0805f000 c46ee180 c46f3e5c c7058820 c1074d37 00000000 08060000 c46db9a0 c46ec080 c7058820 0805f000 08060000 c46f3e98 c1074c50 c106c75e c46f3e98 c46ec080 08060000 0805ffff c46db9a0 c46f3e98 c46e0340 Call Trace: [<c1074d37>] ? mem_cgroup_move_charge_pte_range+0xe7/0x130 [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130 [<c106c75e>] ? walk_page_range+0xee/0x1d0 [<c10725d6>] ? mem_cgroup_move_task+0x66/0x90 [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130 [<c1072570>] ? mem_cgroup_move_task+0x0/0x90 [<c1042616>] ? cgroup_attach_task+0x136/0x200 [<c1042878>] ? cgroup_tasks_write+0x48/0xc0 [<c1041e9e>] ? cgroup_file_write+0xde/0x220 [<c101398d>] ? do_page_fault+0x17d/0x3f0 [<c108a79d>] ? alloc_fd+0x2d/0xd0 [<c1041dc0>] ? cgroup_file_write+0x0/0x220 [<c1077ba2>] ? vfs_write+0x92/0xc0 [<c1077c81>] ? sys_write+0x41/0x70 [<c1140e3d>] ? syscall_call+0x7/0xb Code: 03 00 74 09 8b 44 24 04 e8 1c f1 ff ff 89 73 04 8d 86 b0 00 00 00 b9 01 00 00 00 89 da 31 ff e8 65 f5 ff ff e9 4d ff ff ff 0f 0b <0f> 0b 0f 0b 0f 0b 90 8d b4 26 00 00 00 00 83 ec 10 8b 0d f4 e3 EIP: [<c10731b2>] mem_cgroup_move_account+0xe2/0xf0 SS:ESP 0068:c46f3e30 ---[ end trace 7daa1582159b6532 ]--- lock_page_cgroup and unlock_page_cgroup are implemented using bit_spinlock. bit_spinlock doesn't touch the bit if we are on non-SMP machine, so we can't use the bit to check whether the lock was taken. Let's introduce is_page_cgroup_locked based on bit_spin_is_locked instead of PageCgroupLocked to fix it. [akpm@linux-foundation.org: s/is_page_cgroup_locked/page_is_cgroup_locked/] Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Signed-off-by:
-
Will Newton authored
Disable the winch irq early to make sure we don't take an interrupt part way through the freeing of the handler data, resulting in a crash on shutdown: winch_interrupt : read failed, errno = 9 fd 13 is losing SIGWINCH support ------------[ cut here ]------------ WARNING: at lib/list_debug.c:48 list_del+0xc6/0x100() list_del corruption, next is LIST_POISON1 (00100100) 082578c8: [<081fd77f>] dump_stack+0x22/0x24 082578e0: [<0807a18a>] warn_slowpath_common+0x5a/0x80 08257908: [<0807a23e>] warn_slowpath_fmt+0x2e/0x30 08257920: [<08172196>] list_del+0xc6/0x100 08257940: [<08060244>] free_winch+0x14/0x80 08257958: [<080606fb>] winch_interrupt+0xdb/0xe0 08257978: [<080a65b5>] handle_IRQ_event+0x35/0xe0 08257998: [<080a8717>] handle_edge_irq+0xb7/0x170 082579bc: [<08059bc4>] do_IRQ+0x34/0x50 082579d4: [<08059e1b>] sigio_handler+0x5b/0x80 082579ec: [<0806a374>] sig_handler_common+0x44/0xb0 08257a68: [<0806a538>] sig_handler+0x38/0x50 08257a78: [<0806a77c>] handle_signal+0x5c/0xa0 08257a9c: [<0806be28>] hard_handler+0x18/0x20 08257aac: [<00c14400>] 0xc14400 Signed-off-by:
Will Newton <will.newton@gmail.com> Acked-by:
-
Steven J. Magnani authored
Depending on processor speed, page size, and the amount of memory a process is allowed to amass, cleanup of a large VM may freeze the system for many seconds. This can result in a watchdog timeout. Make sure other tasks receive some service when cleaning up large VMs. Signed-off-by:
Steven J. Magnani <steve@digidescorp.com> Cc: Greg Ungerer <gerg@snapgear.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by:
-
Loïc Minier authored
dpkg uses fiemap but didn't particularly need to include stdint.h so far. Since 367a51a3 ("fs: Add FITRIM ioctl"), build of linux/fs.h failed in dpkg with: In file included from ../../src/filesdb.c:27:0: /usr/include/linux/fs.h:37:2: error: expected specifier-qualifier-list before 'uint64_t' Use exportable type __u64 to avoid the dependency on stdint.h. b31d42a5 ("Fix compile brekage with !CONFIG_BLOCK") fixed only the kernel build by including linux/types.h, but this also fixed "make headers_check", so don't revert it. Signed-off-by:
Loïc Minier <loic.minier@linaro.org> Tested-by:
Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dmitry Monakhov <dmonakhov@openvz.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Steven Rostedt authored
While running randconfg with ktest.pl I stumbled upon this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 IP: [<ffffffff815fe44f>] strstr+0x39/0x86 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/ RIP: 0010:[<ffffffff815fe44f>] [<ffffffff815fe44f>] strstr+0x39/0x86 RSP: 0018:ffff8800797cbd80 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003 RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725 R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020 R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08 FS: 0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000) Stack: 00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000 Call Trace: [<ffffffff81e2050f>] dmi_matches+0x117/0x154 [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8 [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8 [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20 [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8 [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2 [<ffffffff82da749c>] kernel_init+0x248/0x331 [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10 [<ffffffff82da7254>] ? kernel_init+0x0/0x331 Found that the nas_led_whitelist dmi_system_id structure array had no NULL end delimiter, causing the dmi_check_system() loop to read an undefined entry. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Dave Hansen <dave@sr71.net> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
James Jones authored
The find_next_bit, find_first_bit, find_next_zero_bit and find_first_zero_bit functions were not properly clamping to the maxbit argument at the bit level. They were instead only checking maxbit at the byte level. To fix this, add a compare and a conditional move instruction to the end of the common bit-within-the- byte code used by all the functions and be sure not to clobber the maxbit argument before it is used. Cc: <stable@kernel.org> Reviewed-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
James Jones <jajones@nvidia.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Chris Metcalf authored
This change fixes a bug that memchr() will read the first word of the source even if the length is zero. Ironically, the code was originally written with a test to avoid exactly this problem, but to make the code conform to Linux coding standards with all declarations preceding all statements, the first load from memory was moved up above that test as the initial value for a variable. The change just moves all the variable declarations to the top of the file, with no initializers, so that the test can also be at the top of the file. Signed-off-by:Chris Metcalf <cmetcalf@tilera.com>
-
Chris Metcalf authored
glibc assumes that it can count /sys/devices/system/cpu/cpu* to get the number of configured cpus. For this to be valid on tile, we need to generate a "cpu" entry for all cpus, including the ones that are not currently allocated for Linux's use. Signed-off-by: -
Chris Metcalf authored
-
Chris Metcalf authored
This change enables PCI root complex support for TILEPro. Unlike TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI support consists of hypervisor upcalls for PIO, DMA, etc. However, the performance is fine for the devices we have tested with so far (1Gb Ethernet, SATA, etc.). The <asm/io.h> header was tweaked to be a little bit more aggressive about disabling attempts to map/unmap IO port space. The hacky <asm/pci-bridge.h> header was rolled into the <asm/pci.h> header and the result was simplified. Both of the latter two headers were preliminary versions not meant for release before now - oh well. There is one quirk for our TILEmpower platform, which accidentally negotiates up to 5GT and needs to be kicked down to 2.5GT. Signed-off-by: -
Chris Metcalf authored
This change adds the first network driver for the tile architecture, supporting the on-chip XGBE and GBE shims. The infrastructure is present for the TILE-Gx networking drivers (another three source files in the new directory) but for now the the actual tilegx sources are waiting on releasing hardware to initial customers. Note that arch/tile/include/hv/* are "upstream" headers from the Tilera hypervisor and will probably benefit less from LKML review. Signed-off-by: -
Huang Weiyi authored
Remove duplicated #include('s) in arch/x86/xen/setup.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Ian Campbell authored
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Tested-by:
-
Aaro Koskinen authored
The file is not needed. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
