- 06 Feb, 2013 40 commits
-
-
Tom Mingarelli authored
commit ea2447f7 upstream. This patch is to prevent non-USB devices that have RMRRs associated with them from being placed into the SI Domain during init. This fixes the issue where the RMRR info for devices being placed in and out of the SI Domain gets lost. Signed-off-by:
Thomas Mingarelli <thomas.mingarelli@hp.com> Tested-by:
Shuah Khan <shuah.khan@hp.com> Reviewed-by:
Donald Dutile <ddutile@redhat.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ian Abbott authored
commit c43435d7 upstream. comedi_auto_config() associates a Comedi minor device number with an auto-configured hardware device and comedi_auto_unconfig() disassociates it. Currently, these use the hardware device's private data pointer to point to some allocated storage holding the minor device number. This is a bit of a waste of the hardware device's private data pointer, preventing it from being used for something more useful by the low-level comedi device drivers. For example, it would make more sense if comedi_usb_auto_config() was passed a pointer to the struct usb_interface instead of the struct usb_device, but this cannot be done currently because the low-level comedi drivers already use the private data pointer in the struct usb_interface for something more useful. This patch stops the comedi core hijacking the hardware device's private data pointer. Instead, comedi_auto_config() stores a pointer to the hardware device's struct device in the struct comedi_device_file_info associated with the minor device number, and comedi_auto_unconfig() calls new function comedi_find_board_minor() to recover the minor device number associated with the hardware device. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Daniel Vetter authored
commit 48e85834 upstream. This reverts commit 9756fe38. The bogus lvds output is actually a lvds->hdmi bridge, which we don't really support. But unconditionally disabling it breaks some existing setups. Reported-by:
John Tapsell <johnflux@gmail.com> References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ian Abbott authored
commit 34ffb33e upstream. The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the 'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config needs to also select 'COMEDI_FC'. Signed-off-by:
-
Kees Cook authored
commit c9408265 upstream. The traps are referred to by their numbers and it can be difficult to understand them while reading the code without context. This patch adds enumeration of the trap numbers and replaces the numbers with the correct enum for x86. Signed-off-by:
Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20120310000710.GA32667@www.outflux.netSigned-off-by:
H. Peter Anvin <hpa@zytor.com> Cherry-picked-for: v2.3.37 Signed-off-by:
John Kacur <jkacur@redhat.com> Signed-off-by:
-
Daniel Vetter authored
commit 4283908e upstream. Quoting from Bspec, 3D_CHICKEN1, bit 10 This bit needs to be set always to "1", Project: DevSNB " Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Abdallah Chatila <abdallah.chatila@ericsson.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 9f9c9cbb upstream. The right dmi version is in SMBIOS if it's zero in DMI region This issue was originally found from an oracle bug. One customer noticed system UUID doesn't match between dmidecode & uek2. - HP ProLiant BL460c G6 : # cat /sys/devices/virtual/dmi/id/product_uuid 00000000-0000-4C48-3031-4D5030333531 # dmidecode | grep -i uuid UUID: 00000000-0000-484C-3031-4D5030333531 From SMBIOS 2.6 on, spec use little-endian encoding for UUID other than network byte order. So we need to get dmi version to distinguish. If version is 0.0, the real version is taken from the SMBIOS version. This is part of original kernel comment in code. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Feng Jin <joe.jin@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Zhenzhong Duan authored
commit f1d8e614 upstream. As of version 2.6 of the SMBIOS specification, the first 3 fields of the UUID are supposed to be little-endian encoded. Also a minor fix to match variable meaning and mute checkpatch.pl [akpm@linux-foundation.org: tweak code comment] Signed-off-by:
-
Joel D. Diaz authored
commit afd5e34b upstream. scsi_register_driver will register a prep_fn() function, which in turn migh need to use the sd_cdp_pool for DIF. Which hasn't been initialised at this point, leading to a crash. So reshuffle the init_sd() and exit_sd() paths to have the driver registered last. Signed-off-by:
Joel D. Diaz <joeldiaz@us.ibm.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Alan Cox authored
commit 7b4f6eca upstream. They don't always appear as AHCI class devices but instead as IDE class. Based on an initial patch by Hiroaki Nito Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
H. Peter Anvin authored
commit e43b3cec upstream. early_pci_allowed() and read_pci_config_16() are only available if CONFIG_PCI is defined. Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
H. Peter Anvin authored
commit ab3cd867 upstream. Mark static arrays as __initconst so they get removed when the init sections are flushed. Reported-by:
Mathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/75F4BEE6-CB0E-4426-B40B-697451677738@googlemail.comSigned-off-by:
-
Jesse Barnes authored
commit a9acc536 upstream. SNB graphics devices have a bug that prevent them from accessing certain memory ranges, namely anything below 1M and in the pages listed in the table. So reserve those at boot if set detect a SNB gfx device on the CPU to avoid GPU hangs. Stephane Marchesin had a similar patch to the page allocator awhile back, but rather than reserving pages up front, it leaked them at allocation time. [ hpa: made a number of stylistic changes, marked arrays as static const, and made less verbose; use "memblock=debug" for full verbosity. ] Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Trond Myklebust authored
commit c489ee29 upstream. NFS4ERR_DELAY is a legal reply when we call DESTROY_SESSION. It usually means that the server is busy handling an unfinished RPC request. Just sleep for a second and then retry. We also need to be able to handle the NFS4ERR_BACK_CHAN_BUSY return value. If the NFS server has outstanding callbacks, we just want to similarly sleep & retry. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Trond Myklebust authored
commit ab225417 upstream. Ensure that any setattr and getattr requests for junctions and/or mountpoints are sent to the server. Ever since commit 0ec26fd0 (vfs: automount should ignore LOOKUP_FOLLOW), we have silently dropped any setattr requests to a server-side mountpoint. For referrals, we have silently dropped both getattr and setattr requests. This patch restores the original behaviour for setattr on mountpoints, and tries to do the same for referrals, provided that we have a filehandle... Signed-off-by:
-
Matt Fleming authored
commit e0094244 upstream. It has been reported that running this driver on some Samsung laptops with EFI can cause those machines to become bricked as detailed in the following report, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 There have also been reports of this driver causing Machine Check Exceptions on recent EFI-enabled Samsung laptops, https://bugzilla.kernel.org/show_bug.cgi?id=47121 So disable it if booting from EFI since this driver relies on grovelling around in the BIOS memory map which isn't going to work. Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Matt Fleming authored
commit 83e68189 upstream. Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Cc: David Airlie <airlied@linux.ie> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Peter Jones <pjones@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Dan Carpenter authored
commit 8024c4c0 upstream. We're testing for ->show but calling ->store(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 9ddf1aeb upstream. For non-snoop mode, we fiddle with the page attributes of CORB/RIRB and the position buffer, but also the ring buffers. The problem is that the current code blindly assumes that the buffer is contiguous. However, the ring buffers may be SG-buffers, thus a wrong vmapped address is passed there, leading to Oops. This patch fixes the handling for SG-buffers. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=800701Signed-off-by:
Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: open-code snd_pcm_get_dma_buf()] Signed-off-by:
-
Jan Kara authored
commit 4b05d09c upstream. Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. CC: xfs@oss.sgi.com CC: Ben Myers <bpm@sgi.com> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Suravee Suthikulpanit authored
commit 318fe782 upstream. The IOMMU may stop processing page translations due to a perceived lack of credits for writing upstream peripheral page service request (PPR) or event logs. If the L2B miscellaneous clock gating feature is enabled the IOMMU does not properly register credits after the log request has completed, leading to a potential system hang. BIOSes are supposed to disable L2B micellaneous clock gating by setting L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b. This patch corrects that for those which do not enable this workaround. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by:
-
Wang YanQing authored
commit f44310b9 upstream. I get the following warning every day with v3.7, once or twice a day: [ 2235.186027] WARNING: at /mnt/sda7/kernel/linux/arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0x2f/0xb8() As explained by Linus as well: | | Once we've done the "list_add_rcu()" to add it to the | queue, we can have (another) IPI to the target CPU that can | now see it and clear the mask. | | So by the time we get to actually send the IPI, the mask might | have been cleared by another IPI. | This patch also fixes a system hang problem, if the data->cpumask gets cleared after passing this point: if (WARN_ONCE(!mask, "empty IPI mask")) return; then the problem in commit 83d349f3 ("x86: don't send an IPI to the empty set of CPU's") will happen again. Signed-off-by:
Wang YanQing <udknight@gmail.com> Acked-by:
Jan Beulich <jbeulich@suse.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: peterz@infradead.org Cc: mina86@mina86.org Cc: srivatsa.bhat@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/20130126075357.GA3205@udknight [ Tidied up the changelog and the comment in the code. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Clemens Ladisch authored
commit d56268fb upstream. Commit 23caaf19 (ALSA: usb-mixer: Add support for Audio Class v2.0) forgot to adjust the length check for UAC 2.0 feature unit descriptors. This would make the code abort on encountering a feature unit without per-channel controls, and thus prevented the driver to work with any device having such a unit, such as the RME Babyface or Fireface UCX. Reported-by:
Florian Hanisch <fhanisch@uni-potsdam.de> Tested-by:
Matthew Robbetts <wingfeathera@gmail.com> Tested-by:
Michael Beer <beerml@sigma6audio.de> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Olivier Sobrie authored
commit ee50e135 upstream. Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Signed-off-by:
Olivier Sobrie <olivier@sobrie.be> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Olivier Sobrie authored
commit 71088c4b upstream. Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: Anant Gole <anantgole@ti.com> Signed-off-by:
-
Olivier Sobrie authored
commit 6ea45886 upstream. Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by:
-
Alan Cox authored
commit c903f045 upstream. At the moment the MSR driver only relies upon file system checks. This means that anything as root with any capability set can write to MSRs. Historically that wasn't very interesting but on modern processors the MSRs are such that writing to them provides several ways to execute arbitary code in kernel space. Sample code and documentation on doing this is circulating and MSR attacks are used on Windows 64bit rootkits already. In the Linux case you still need to be able to open the device file so the impact is fairly limited and reduces the security of some capability and security model based systems down towards that of a generic "root owns the box" setup. Therefore they should require CAP_SYS_RAWIO to prevent an elevation of capabilities. The impact of this is fairly minimal on most setups because they don't have heavy use of capabilities. Those using SELinux, SMACK or AppArmor rules might want to consider if their rulesets on the MSR driver could be tighter. Signed-off-by:
-
Ilija Hadzic authored
commit 1da80cfa upstream. If one (but not both) allocations of p->chunks[].kpage[] in radeon_cs_parser_init fail, the error path will free the successfully allocated page, but leave a stale pointer value in the kpage[] field. This will later cause a double-free when radeon_cs_parser_fini is called. This patch fixes the issue by forcing both pointers to NULL after kfree in the error path. The circumstances under which the problem happens are very rare. The card must be AGP and the system must run out of kmalloc area just at the right time so that one allocation succeeds, while the other fails. Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: s/p->chunk_ib_idx/i/] Signed-off-by:
-
Daniel Vetter authored
commit 4518f611 upstream. Useful for statistics or on overflowing bug reports to keep things all lined up. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
commit 9452618e upstream. DMAR support on g4x/gm45 integrated gpus seems to be totally busted. So don't bother, but instead disable it by default to allow distros to unconditionally enable DMAR support. v2: Actually wire up the right quirk entry, spotted by Adam Jackson. Note that according to intel marketing materials only g45 and gm45 support DMAR/VT-d. So we have reports for all relevant gen4 pci ids by now. Still, keep all the other gen4 ids in the quirk table in case the marketing stuff confused me again, which would not be the first time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51921 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163 Cc: Adam Jackson <ajax@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-By:
David Woodhouse <David.Woodhouse@intel.com> Tested-by:
stathis <stathis@npcglib.org> Tested-by:
Mihai Moldovan <ionic@ionic.de> Signed-off-by:
-
Chris Wilson authored
commit f05bb0c7 upstream. On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1, the hardware can not program the scanline values. Those scanline values then control when the signal is sent from the display engine to the render ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB invalidations must be performed explicitly through the appropriate bits being set in PIPE_CONTROL. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Chris Wilson authored
commit 1c8c38c5 upstream. This is a required workarounds for all products, especially on gen6+ where it causes the command streamer to fail to parse instructions following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising between the GPU and the display engines, and so this bit being unset may cause hangs. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Eric Anholt authored
commit fc74d8e0 upstream. Older specs claimed this was bit 11, but newer specs and the actual simulator code say it was bit 12. Regardless, we don't use MI_FLUSH, or try to enable it any more. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
-
Eric Anholt authored
commit 8d79c349 upstream. We have always been using the wrong bit -- it's bit 12. However, the bit also doesn't do anything -- hardware has always accepted the MI_FLUSH command even when it was specced not to. Given that there is only one MI_FLUSH emitted in all of the driver stack on gen6+ (in i965_video.c of the 2d driver, and it should be using other code to do its flush instead), just remove the MI_FLUSH enable instead of trying to fix it. Signed-off-by:
-
Avinash Patil authored
commit 83f0c6d1 upstream. Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Reviewed-by:
Sergey V. <sftp.mtuci@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit 24171dd9 upstream. Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
commit 4a8f1995 upstream. Signed-off-by:
-
Nathan Zimmer authored
commit b8f2c21d upstream. Update efi_call_phys_prelog to install an identity mapping of all available memory. This corrects a bug on very large systems with more then 512 GB in which bios would not be able to access addresses above not in the mapping. The result is a crash that looks much like this. BUG: unable to handle kernel paging request at 000000effd870020 IP: [<0000000078bce331>] 0x78bce330 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU 0 Pid: 0, comm: swapper/0 Tainted: G W 3.8.0-rc1-next-20121224-medusa_ntz+ #2 Intel Corp. Stoutland Platform RIP: 0010:[<0000000078bce331>] [<0000000078bce331>] 0x78bce330 RSP: 0000:ffffffff81601d28 EFLAGS: 00010006 RAX: 0000000078b80e18 RBX: 0000000000000004 RCX: 0000000000000004 RDX: 0000000078bcf958 RSI: 0000000000002400 RDI: 8000000000000000 RBP: 0000000078bcf760 R08: 000000effd870000 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000000c3 R12: 0000000000000030 R13: 000000effd870000 R14: 0000000000000000 R15: ffff88effd870000 FS: 0000000000000000(0000) GS:ffff88effe400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000effd870020 CR3: 000000000160c000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/0 (pid: 0, threadinfo ffffffff81600000, task ffffffff81614400) Stack: 0000000078b80d18 0000000000000004 0000000078bced7b ffff880078b81fff 0000000000000000 0000000000000082 0000000078bce3a8 0000000000002400 0000000060000202 0000000078b80da0 0000000078bce45d ffffffff8107cb5a Call Trace: [<ffffffff8107cb5a>] ? on_each_cpu+0x77/0x83 [<ffffffff8102f4eb>] ? change_page_attr_set_clr+0x32f/0x3ed [<ffffffff81035946>] ? efi_call4+0x46/0x80 [<ffffffff816c5abb>] ? efi_enter_virtual_mode+0x1f5/0x305 [<ffffffff816aeb24>] ? start_kernel+0x34a/0x3d2 [<ffffffff816ae5ed>] ? repair_env_string+0x60/0x60 [<ffffffff816ae2be>] ? x86_64_start_reservations+0xba/0xc1 [<ffffffff816ae120>] ? early_idt_handlers+0x120/0x120 [<ffffffff816ae419>] ? x86_64_start_kernel+0x154/0x163 Code: Bad RIP value. RIP [<0000000078bce331>] 0x78bce330 RSP <ffffffff81601d28> CR2: 000000effd870020 ---[ end trace ead828934fef5eab ]--- Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Nathan Zimmer <nzimmer@sgi.com> Signed-off-by:
Robin Holt <holt@sgi.com> Signed-off-by:
-
Piotr Haber authored
commit a1fe5280 upstream. On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Piotr Haber <phaber@broadcom.com> Signed-off-by:
-
Felix Fietkau authored
commit 1adb2e2b upstream. When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Signed-off-by:
-
