If group_bh is not initialized, there is no need to release.  This
problem does not cause anything wrong, but the patch would make the code
more logical.
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If ocfs2_journal_access_di() fails, group->bg_next_group should rollback.
Otherwise, there would be a inconsistency between group_bh and main_bm_bh.
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We already have find_last_bit().  So just use it as described in the
comment.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We trigger a bug in __dlm_lockres_reserve_ast() when we parallel umount 4
nodes.  The situation is as follows:

1) Node A migrate all lockres it owned(eg.  lockres A) to other nodes
   say node B when it umounts.

2) Receiving MIG_LOCKRES message from A, Node B masters the lockres A
   with DLM_LOCK_RES_MIGRATING state set.

3) Then we umount ocfs2 on node B.  It also should migrate lockres A to
   another node, say node C.  But now, DLM_LOCK_RES_MIGRATING state of
   lockers A is not cleared.  Node B triggered the BUG on lockres with
   state DLM_LOCK_RES_MIGRATING.
Signed-off-by: Xuejiufei <xuejiufei@huawei.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A parallel umount on 4 nodes triggered a bug in
dlm_process_recovery_date().  Here's the situation:

Receiving MIG_LOCKRES message, A node processes the locks in migratable
lockres.  It copys lvb from migratable lockres when processing the first
valid lock.

If there is a lock in the blocked list with the EX level, it triggers the
BUG.  Since valid lvbs are set when locks are granted with EX or PR
levels, locks in the blocked list cannot have valid lvbs.  Therefore I
think we should skip the locks in the blocked list.
Signed-off-by: Xuejiufei <xuejiufei@huawei.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use bitmap_weight() instead of reinventing the wheel.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

-EDQUOT is a user-visible error, not a logic problem.  Teach mlog_errno()
to ignore it like it ignores -ENOSPC, etc.
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Marek Królikowski <admin@wset.edu.pl>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sb_getblk() may return an err, so add a check for bh.

[joseph.qi@huawei.com: also add a check after calling sb_getblk() in ocfs2_create_xattr_block()]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So return ENOMEM instead when it fails.

[joseph.qi@huawei.com: ocfs2_symlink_get_block() and ocfs2_read_blocks_sync() and ocfs2_read_blocks() need the same change]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Unwritten extent only exists for file systems which support holes.  But
the comment said was opposite meaning and also the comment is not very
clear, so rephase it.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Code cleanup to remove unnecessary variable passed but never used
to ocfs2_calc_extend_credits.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Building with a large config and -ffunction-sections results in a large
number of sections and sortextable needs to be able to handle that.
Implement support for > 64K sections as modpost does.
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On cris arch, the functions below aren't defined:

  drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_read':

  drivers/media/platform/sh_veu.c:228:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]
  drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_write':

  drivers/media/platform/sh_veu.c:234:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read':
  drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write':
  drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read':
  drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write':
  drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]
  drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_setup':
  drivers/media/platform/soc_camera/rcar_vin.c:284:3: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]

  drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_request_capture_stop':
  drivers/media/platform/soc_camera/rcar_vin.c:353:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]

Yet, they're available, as CONFIG_GENERIC_IOMAP is defined.  What happens
is that asm/io.h was not including asm-generic/iomap.h.
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove useless variable 'regs' to avoid the related warnings (warning is
treated as error).
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'fn' is not defined, according to the implementation copy_thread() in
'sh32', need use 'usp' instead of.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Any user process callers of wait_for_completion() except global init
process might be chosen by the OOM killer while waiting for completion()
call by some other process which does memory allocation.  See
CVE-2012-4398 "kernel: request_module() OOM local DoS" can happen.

When such users are chosen by the OOM killer when they are waiting for
completion() in TASK_UNINTERRUPTIBLE, the system will be kept stressed
due to memory starvation because the OOM killer cannot kill such users.

kthread_create() is one of such users and this patch fixes the problem
for kthreadd by making kthread_create() killable - the same approach
used for fixing CVE-2012-4398.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...

Pull LED subsystem changes from Bryan Wu:
 "LED subsystem updates for 3.13 are basically cleanup and also add a
  new driver for PCA9685"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp55xx: handle enable pin in driver
  leds-gpio: of: led should not be created if its status is disabled
  of: introduce of_get_available_child_count
  leds: Added driver for the NXP PCA9685 I2C chip
  leds: pwm: Remove redundant of_match_ptr
  leds: Include linux/of.h header
  leds: dac124s085: Remove redundant spi_set_drvdata
  leds: lp55xx: enable setting default trigger
  leds: blinkm: Remove redundant break

Pull clock framework changes from Mike Turquette:
 "The clock changes for 3.13 are an even mix of framework improvements &
  bug fixes along with updates to existing clock drivers and the
  additional of new clock drivers"

* tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux:
  clk: new driver for efm32 SoC
  clk: of: helper for determining number of parent clocks
  clk/zynq: Fix possible memory leak
  clk: keystone: Build Keystone clock drivers
  clk: keystone: Add gate control clock driver
  clk: keystone: add Keystone PLL clock driver
  Documentation: Add documentation for APM X-Gene clock binding
  clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC
  clk: Add APM X-Gene SoC clock driver
  clk: wm831x: get rid of the implementation of remove function
  clk: Correct lookup logic in clk_fetch_parent_index()
  clk: Use kcalloc() to allocate arrays
  clk: Add error handling to clk_fetch_parent_index()

Pull GPIO changes from Linus Walleij:
 "Here is the bulk of GPIO changes for the v3.13 development cycle.

  I've got ACKs for the things that affect other subsystems (or it's my
  own subsystem, like pinctrl).  Most of that pertain to an attempt from
  my side to consolidate and get rid of custom GPIO implementations in
  the ARM tree.  I will continue doing this.

  The main change this time is the new GPIO descriptor API, background
  for this can be found in Corbet's summary from this january in LWN:

    http://lwn.net/Articles/533632/

  Summary:

   - Merged the GPIO descriptor API from Alexandre Courbot.  This is a
     first step toward trying to get rid of the global GPIO numberspace
     for the future.

   - Add an API so that driver can flag that a certain GPIO line is
     being used by a irqchip backend for generating IRQs, so that we can
     enforce checks, like not allowing users to switch that line to an
     output at runtime, since this makes no sense.  Implemented
     corresponding calls in a few select drivers.

   - ACPI GPIO cleanups, refactorings and switch to using the
     descriptor-based interface.

   - Support for the TPS80036 Palmas GPIO variant.

   - A new driver for the Broadcom Kona GPIO SoC IP block.

   - Device tree support for the PCF857x driver.

   - A set of ARM GPIO refactorings with the goal of getting rid of a
     bunch of custom GPIO implementations from the arch/arm/* tree:

     * Move the IOP GPIO driver to the GPIO subsystem and fix all users
       to use the gpiolib API for accessing GPIOs.  Delete the old
       custom GPIO implementation.

     * Delete the unused custom PXA GPIO implemention.

     * Convert all users of the IXP4 custom GPIO implementation to use
       gpiolib and delete the custom implementation.

     * Delete the custom Gemini GPIO implementation, also completely
       unused.

   - Various cleanups and renamings"

* tag 'gpio-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
  gpio: gpio-mxs: Remove unneeded dt checks
  gpio: pl061: don't depend on CONFIG_ARM
  gpio: bcm-kona: add missing .owner to struct gpio_chip
  gpiolib: provide a declaration of seq_file in gpio/driver.h
  gpiolib: include gpio/consumer.h in of_gpio.h for desc_to_gpio()
  gpio: provide stubs for devres gpio functions
  gpiolib: devres: add missing headers
  gpiolib: make GPIO_DEVRES depend on GPIOLIB
  gpiolib: devres: fix devm_gpiod_get_index()
  gpiolib / ACPI: document the GPIO descriptor based interface
  gpiolib / ACPI: allow passing GPIOF_ACTIVE_LOW for GpioInt resources
  gpiolib / ACPI: add ACPI support for gpiod_get_index()
  gpiolib / ACPI: convert to gpiod interfaces
  gpiolib: add gpiod_get() and gpiod_put() functions
  gpiolib: port of_ functions to use gpiod
  gpiolib: export descriptor-based GPIO interface
  Fixup "MAINTAINERS: GPIO-INTEL-MID: add maintainer"
  gpio: bcm281xx: Don't print addresses of GPIO area in probe()
  gpio: tegra: use new gpio_lock_as_irq() API
  gpio: rcar: Include linux/of.h header
  ...

Merge tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Main pin control pull request for the v3.13 cycle.

  The changes hitting arch/blackfin are ACKed by the Blackfin
  maintainer, and the device tree bindings are ACKed to the extent
  possible by someone from the device tree maintainers group.

   - Blackfin ADI pin control driver, we move yet another architecture
     under this subsystem umbrella.

   - Incremental updates to the Renesas Super-H PFC pin control driver.
     New subdriver for the r8a7791 SoC.

   - Non-linear GPIO ranges from the gpiolib side of things, this
     enabled simplified device tree bindings by referring entire groups
     of pins on some pin controller to act as back-end for a certain
     GPIO-chip driver.

   - Add the Abilis TB10x pin control driver used on the ARC
     architecture.  Also the corresponding GPIO driver is merged through
     this tree, so the ARC has full support for pins and GPIOs after
     this.

   - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin controller
     instances.  The i.MX1 and i.MX27 is an entirely new family
     (silicon) of controllers whereas i.MX50 is a variant of the
     previous supported controller.

   - Then the usual slew of fixes, cleanups and incremental updates"

The ARC DT changes are apparently still pending, that hopefully gets
sorted out in a timely manner.

* tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: imx50: add pinctrl support code for the IMX50 SoC
  pinctrl: at91: copy define to driver
  pinctrl: remove minor dead code
  pinctrl: imx: fix using pin->input_val wrongly
  pinctrl: imx1: fix return value check in imx1_pinctrl_core_probe()
  gpio: tb10x: fix return value check in tb10x_gpio_probe()
  gpio: tb10x: use module_platform_driver to simplify the code
  pinctrl: imx27: imx27 pincontrol driver
  pinctrl: imx1 core driver
  pinctrl: sh-pfc: r8a7791 PFC support
  sh-pfc: r8a7778: Add CAN pin groups
  gpio: add TB10x GPIO driver
  pinctrl: at91: correct a few typos
  pinctrl: mvebu: remove redundant of_match_ptr
  pinctrl: tb10x: use module_platform_driver to simplify the code
  pinctrl: tb10x: fix the error handling in tb10x_pinctrl_probe()
  pinctrl: add documentation for pinctrl_get_group_pins()
  pinctrl: rockchip: emulate both edge triggered interrupts
  pinctrl: rockchip: add rk3188 specifics
  pinctrl: rockchip: remove redundant check
  ...

Pull sound updates from Takashi Iwai:
 "There are no too intrusive changes in this update batch.  The biggest
  LOC is found in the new DICE driver, and other small changes are
  scattered over the whole sound subtree (which is a common pattern).

  Below are highlights:

   - ALSA core:
     * Memory allocation support with genpool
     * Fix blocking in drain ioctl of compress_offload

   - HD-audio:
     * Improved AMD HDMI supports
     * Intel HDMI detection improvements
     * thinkpad_acpi mute-key integration
     * New PCI ID, New ALC255,285,293 codecs, CX20952

   - USB-audio:
     * New buffer size management
     * Clean up endpoint handling codes

   - ASoC:
     * Further work on the dmaengine helpers, including support for
       configuring the parameters for DMA by reading the capabilities of
       the DMA controller which removes some guesswork and magic numbers
       from drivers.
     * A refresh of the documentation.
     * Conversions of many drivers to direct regmap API usage in order
       to allow the ASoC level register I/O code to be removed, this
       will hopefully be completed by v3.14.
     * Support for using async register I/O in DAPM, reducing the time
       taken to implement power transitions on systems that support it.

   - Firewire: DICE driver

   - Lots of small fixes for bugs reported by Coverity"

* tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits)
  ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported
  ALSA: hda - Apply MacBook fixups for CS4208 correctly
  ASoC: fsl: imx-wm8962: remove an unneeded check
  ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
  ALSA: hda/realtek - Make fixup regs persist after resume
  ALSA: hda_intel: ratelimit "spurious response" message
  ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default
  ASoC: dapm: Use WARN_ON() instead of BUG_ON()
  ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages
  ASoC: Replace BUG() with WARN()
  ASoC: wm_hubs: Replace BUG() with WARN()
  ASoC: wm8996: Replace BUG() with WARN()
  ASoC: wm8962: Replace BUG() with WARN()
  ASoC: wm8958: Replace BUG() with WARN()
  ASoC: wm8904: Replace BUG() with WARN()
  ASoC: wm8900: Replace BUG() with WARN()
  ASoC: wm8350: Replace BUG() with WARN()
  ASoC: txx9: Use WARN_ON() instead of BUG_ON()
  ASoC: sh: Use WARN_ON() instead of BUG_ON()
  ASoC: rcar: Use WARN_ON() instead of BUG_ON()
  ...

Pull spi updates from Mark Brown:
 "As well as the usual driver updates and cleanups there's a few
  improvements to the core here:

   - The start of some improvements to factor out more of the SPI
     message loop into the core.  Right now this is just simplifying the
     code a bit but hopefully next time around we'll also have managed
     to roll out some noticable performance improvements which drivers
     can take advantage of.
   - Support for loading modules for ACPI enumerated SPI devices.
   - Managed registration for SPI controllers.
   - Helper for another common I/O pattern"

* tag 'spi-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (116 commits)
  spi/hspi: add device tree support
  spi: atmel: fix return value check in atmel_spi_probe()
  spi: spi-imx: only enable the clocks when we start to transfer a message
  spi/s3c64xx: Fix doubled clock disable on suspend
  spi/s3c64xx: Do not ignore return value of spi_master_resume/suspend
  spi: spi-mxs: Use u32 instead of uint32_t
  spi: spi-mxs: Don't set clock for each xfer
  spi: spi-mxs: Clean up setup_transfer function
  spi: spi-mxs: Remove check of spi mode bits
  spi: spi-mxs: Fix race in setup method
  spi: spi-mxs: Remove bogus setting of ssp clk rate field
  spi: spi-mxs: Remove full duplex check, spi core already does it
  spi: spi-mxs: Fix chip select control bits in DMA mode
  spi: spi-mxs: Fix extra CS pulses and read mode in multi-transfer messages
  spi: spi-mxs: Change flag arguments in txrx functions to bit flags
  spi: spi-mxs: Always clear INGORE_CRC, to keep CS asserted
  spi: spi-mxs: Remove mxs_spi_enable and mxs_spi_disable
  spi: spi-mxs: Always set LOCK_CS
  spi/s3c64xx: Add missing pm_runtime_put on setup fail
  spi/s3c64xx: Add missing pm_runtime_set_active() call in probe()
  ...

Pull regulator updates from Mark Brown:
 "Lots of driver updates here plus some nice new core features, the main
  one being the first:

   - Enable support for providing a dummy regulator when we know that
     one must exist for the device to be functional.  This makes it much
     easier to add regulator support to drivers since we don't require
     that the machine integration for all systems using the device be
     updated to provide regulators.
   - Substantial reduction in the amount of busy waiting done while
     waiting for enables to complete.
   - Allow MFDs to distribute regulator supplies to child devices so we
     don't have to expose the internal structure of MFDs outside of the
     driver.
   - Managed registeration for regulators"

* tag 'regulator-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (113 commits)
  regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4
  regulator: s5m8767: Modify parse_dt function to parse data related to ramp
  regulator: da9052: Revert se apply_[reg|bit] with regmap based voltage_sel operations
  mfd: arizona: Specify supply mappings for Arizona CODECs
  mfd: Allow mapping regulator supplies to MFD device from children
  regulator: core: Add ability to create a lookup alias for supply
  regulator: tps65910: Fix checkpatch issue
  regulator: tps65023: Fix checkpatch issue
  regulator: tps6105x: Fix checkpatch issue
  regulator: mc13783: Fix checkpatch issue
  regulator: max8997: Fix checkpatch issue
  regulator: lp3971: Fix checkpatch issue
  regulator: fixed: Fix checkpatch issue
  regulator: anatop: Fix checkpatch issue
  regulator: Add REGULATOR_LINEAR_RANGE macro
  regulator: Remove max_uV from struct regulator_linear_range
  regulator: ti-abb: Fix operator precedence typo
  regulator: tps65910: get regulators node from parent node only
  regulator: tps6586x: get regulators node from parent node only
  regulator: tps65090: get regulators node from parent node only
  ...

Pull regmap updates from Mark Brown:
 "The main thing this time around has been some improvments to async
  I/O.

   - Cleaned up the async I/O support and extended it to allow single
     register writes more easily.  This is now used where possible for
     internally generated I/O, providing performance improvements for
     devices that can do async I/O.
   - An API for issuing a sequence of register writes as a single
     operation.  Some devices and buses can take advantage of this to do
     the I/O faster.
   - Addition of regmap_field APIs which help drivers for devices with
     repeated IPs or which move registers around between revisions to
     share helpers.
   - Support for SPMI buses"

* tag 'regmap-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add SPMI support
  regmap: debugfs: Fix a boot time crash with early regmap init
  regmap: irq: clear status when disable irq
  regmap: Only send a single buffer for async I/O if writing one register
  regmap: spi: Handle async writes of only one buffer
  regmap: new API regmap_multi_reg_write() definition
  regmap: Use async I/O during cache sync
  regmap: Use async I/O for patch application
  regmap: Fix regmap_bulk_write single-rw mutex deadlock
  regmap: Provide asynchronous write and update bits operations
  regmap: Simplify the initiation of async I/O
  regmap: Don't generate gather writes for single register raw writes
  regmap: Cache async work structures
  regmap: add helper macro to set min/max range of register
  regmap: Add regmap_fields APIs
  regmap: add regmap_field_update_bits()

Pull hwmon updates from Guenter Roeck:
 "Introduce new hwmon API functions hwmon_device_register_with_groups
  and devm_hwmon_device_register_with_groups, and convert several
  drivers to use the new API.

  Add support for EMC1404, EMC1424, LTC2977, LTC2978A, LM25063 to
  existing drivers

  Various cleanups in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (w83793) Clean up a signedness issue
  hwmon: (nct6775) Remove an unused variable
  hwmon: (emc1403) Add support for EMC1404 and EMC1424
  hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (pmbus/ltc2978): Add support for LTC2978A
  hwmon: (pmbus/ltc2978): Add support for LTC2977
  hwmon: (pmbus/lm25066) Add support for LM25063
  hwmon: Correct some typos
  hwmon: (gpio-fan) Include linux/of.h header
  hwmon: (lm70) Remove redundant spi_set_drvdata
  hwmon: (adcxx) Remove redundant spi_set_drvdata
  hwmon: (jc42) fix coccinelle warnings
  hwmon: (ltc4261) fix coccinelle warnings
  hwmon: (lm95234) fix coccinelle warnings
  hwmon: (max6697) fix coccinelle warnings
  hwmon: (max6642 fix coccinelle warnings
  hwmon: (ds1621) fix coccinelle warnings
  hwmon: (nct6775) fix coccinelle warnings
  hwmon: (jc42) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (ltc4261) Convert to use devm_hwmon_device_register_with_groups
  ...

Pull powerpc updates from Benjamin Herrenschmidt:
 "The bulk of this is LE updates.  One should now be able to build an LE
  kernel and even run some things in it.

  I'm still sitting on a handful of patches to enable the new ABI that I
  *might* still send this merge window around, but due to the
  incertainty (they are pretty fresh) I want to keep them separate.

  Other notable changes are some infrastructure bits to better handle
  PCI pass-through under KVM, some bits and pieces added to the new
  PowerNV platform support such as access to the CPU SCOM bus via sysfs,
  and support for EEH error handling on PHB3 (Power8 PCIe).

  We also grew arch_get_random_long() for both pseries and powernv when
  running on P7+ and P8, exploiting the HW rng.

  And finally various embedded updates from freescale"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (154 commits)
  powerpc: Fix fatal SLB miss when restoring PPR
  powerpc/powernv: Reserve the correct PE number
  powerpc/powernv: Add PE to its own PELTV
  powerpc/powernv: Add support for indirect XSCOM via debugfs
  powerpc/scom: Improve debugfs interface
  powerpc/scom: Enable 64-bit addresses
  powerpc/boot: Properly handle the base "of" boot wrapper
  powerpc/bpf: Support MOD operation
  powerpc/bpf: Fix DIVWU instruction opcode
  of: Move definition of of_find_next_cache_node into common code.
  powerpc: Remove big endianness assumption in of_find_next_cache_node
  powerpc/tm: Remove interrupt disable in __switch_to()
  powerpc: word-at-a-time optimization for 64-bit Little Endian
  powerpc/bpf: BPF JIT compiler for 64-bit Little Endian
  powerpc: Only save/restore SDR1 if in hypervisor mode
  powerpc/pmu: Fix ADB_PMU_LED_IDE dependencies
  powerpc/nvram: Fix endian issue when using the partition length
  powerpc/nvram: Fix endian issue when reading the NVRAM size
  powerpc/nvram: Scan partitions only once
  powerpc/mpc512x: remove unnecessary #if
  ...

Pull microblaze updates from Michal Simek:
 - Get rid of NO_MMU Kconfig
 - mmap2 fixups
 - Some minor cleanups

* tag 'microblaze-3.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove incorrect file path
  microblaze: Fix bug with mmap2 syscall MB implementation
  microblaze: Use predefined SYSCALL_DEFINE macro
  microblaze: Remove deprecated IRQF_DISABLED
  microblaze: Calculate kernel pad automatically
  microblaze: Remove unused NO_MMU Kconfig parameter

Pull metag architecture changes from James Hogan:
 - A change to remove the last dependence on bootloader exception
   handlers so that QEMU can more easily boot an SMP Linux/Meta kernel
   image directly.
 - A fix for a minor off by one error in a BUG_ON condition found by Dan
   Carpenter.

* tag 'metag-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: off by one in setup_bootmem_node()
  metag: handle low level kicks directly

Pull h8300 platform removal from Guenter Roeck:
 "The patch series has been in -next for more than one relase cycle.  I
  did get a number of Acks, and no objections.

  H8/300 has been dead for several years, the kernel for it has not
  compiled for ages, and recent versions of gcc for it are broken.
  Remove support for it"

* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  CREDITS: Add Yoshinori Sato for h8300
  fs/minix: Drop dependency on H8300
  Drop remaining references to H8/300 architecture
  Drop MAINTAINERS entry for H8/300
  watchdog: Drop references to H8300 architecture
  net/ethernet: Drop H8/300 Ethernet driver
  net/ethernet: smsc9194: Drop conditional code for H8/300
  ide: Drop H8/300 driver
  Drop support for Renesas H8/300 (h8300) architecture

Pull x86 UV debug changes from Ingo Molnar:
 "Various SGI UV debuggability improvements, amongst them KDB support,
  with related core KDB enabling patches changing kernel/debug/kdb/"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86/UV: Add uvtrace support"
  x86/UV: Add call to KGDB/KDB from NMI handler
  kdb: Add support for external NMI handler to call KGDB/KDB
  x86/UV: Check for alloc_cpumask_var() failures properly in uv_nmi_setup()
  x86/UV: Add uvtrace support
  x86/UV: Add kdump to UV NMI handler
  x86/UV: Add summary of cpu activity to UV NMI handler
  x86/UV: Update UV support for external NMI signals
  x86/UV: Move NMI support

Pull x86 uaccess changes from Ingo Molnar:
 "A single change that micro-optimizes __copy_*_user_inatomic(), used by
  the futex code"

* 'x86-uaccess-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add 1/2/4/8 byte optimization to 64bit __copy_{from,to}_user_inatomic

Pull x86 reboot changes from Ingo Molnar:
 "Misc changes - the only one with functional impact should be commit
  16c21ae5 ("reboot: Allow specifying warm/cold reset for CF9 boot
  type") which extends cold/warm reboot handling to the 0xCF9 reboot
  method"

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Correct pr_info() log message in the set_bios/pci/kbd_reboot()
  x86/reboot: Sort reboot DMI quirks by vendor
  x86/reboot: Remove the duplicate C6100 entry in the reboot quirks list
  reboot: Allow specifying warm/cold reset for CF9 boot type

Pull x86 platform fixlet from Ingo Molnar:
 "A single __initdata fix"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/geode: Fix incorrect placement of __initdata tag

Pull x86 mm fixlet from Ingo Molnar:
 "One cleanup that documents a particular detail in init_mem_mapping()"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Add 'step_size' comments to init_mem_mapping()

Pull x86 RAS changes from Ingo Molnar:
 "The biggest change adds support for Intel 'CPER' (UEFI Common Platform
  Error Record) error logging, which builds upon an enhanced error
  logging mechanism available on Xeon processors.

  Full description is here:

    http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html

  This change provides a module (and support code) to check for an
  extended error log and prints extra details about the error on the
  console"

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ACPI, x86: Fix extended error log driver to depend on CONFIG_X86_LOCAL_APIC
  dmi: Avoid unaligned memory access in save_mem_devices()
  Move cper.c from drivers/acpi/apei to drivers/firmware/efi
  EDAC, GHES: Update ghes error record info
  ACPI, APEI, CPER: Cleanup CPER memory error output format
  ACPI, APEI, CPER: Enhance memory reporting capability
  ACPI, APEI, CPER: Add UEFI 2.4 support for memory error
  DMI: Parse memory device (type 17) in SMBIOS
  ACPI, x86: Extended error log driver for x86 platform
  bitops: Introduce a more generic BITMASK macro
  ACPI, CPER: Update cper info
  ACPI, APEI, CPER: Fix status check during error printing

Pull x86 iommu changes from Ingo Molnar:
 "Make it easier to turn off the old AMD GART code"

* 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu: Clean up the CONFIG_GART_IOMMU config option a bit
  x86/iommu: Don't make AMD_GART depend on EXPERT and default y

Pull x86/intel-mid changes from Ingo Molnar:
 "Update the 'intel mid' (mobile internet device) platform code as Intel
  is rolling out more SoC designs.

  This gets rid of most of the 'MRST' platform code in the process,
  mostly by renaming and shuffling code around into their respective
  'intel-mid' platform drivers"

* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit
  intel_mid: Move platform device setups to their own platform_<device>.* files
  x86: intel-mid: Add section for sfi device table
  intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL
  intel_mid: Moved SFI related code to sfi.c
  intel_mid: Added custom handler for ipc devices
  intel_mid: Added custom device_handler support
  intel_mid: Refactored sfi_parse_devs() function
  intel_mid: Renamed *mrst* to *intel_mid*
  pci: intel_mid: Return true/false in function returning bool
  intel_mid: Renamed *mrst* to *intel_mid*
  mrst: Fixed indentation issues
  mrst: Fixed printk/pr_* related issues