We check now the availability of PC beep and skip the build of beep
mixers, but the driver still registers the input device.  This should
be checked as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The behavior of Nvidia HDMI codec regarding the pin-detection unsol events
is based on the old HD-audio spec, i.e. PD bit indicates only the update
and doesn't show the current state.  Since the current code assumes the
new behavior, the pin-detection doesn't work relialby with these h/w.

This patch adds a flag for indicating the old spec, and fixes the issue
by checking the pin-detection explicitly for such hardware.
Tested-by: Wei Ni <wni@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins()
for reducing the click noise at power-off.  But this leaves some pins
uninitialized, and they'll be never recovered after resume.

This patch adds the proper recovery of cleared pin controls on resume.
Also it adds a check of bus->shutdown so that pins won't be cleared at
module unloading.

Reference: Kernel bug 16339
	http://bugzilla.kernel.org/show_bug.cgi?id=16339

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the PCI SSID gives an overriding SKU assno, PC-beep bit isn't
detected (since it's located over 16bit), resulting in no PC beep.
Also, many devices seem ignoring the requirement by Realtek's spec
for SSID numbers, and it also confuses the PC beep detection.

This patch assumes the PC beep is available on every machine with
PCI SSID override.  It's a regression fix from 2.6.34.

Reference: Kernel bug 16251
	http://bugzilla.kernel.org/show_bug.cgi?id=16251Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/463178

Set Macbook 5,2 (106b:4a00) hardware to use ALC885_MB5

Cc: <stable@kernel.org>
Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the following compile warning.  kctl should be NULL-initialized.

  sound/pci/hda/patch_realtek.c: In function ‘alc_build_controls’:
  sound/pci/hda/patch_realtek.c:2550:23: warning: ‘kctl’ may be used uninitialized in this function
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The line-in input is 0x7 not 0x2 for MacBook (Pro) 5,1 / 5,2 models
Signed-off-by: Alex Murray <murray.alex@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

With multiple codec configurations, some codec might have no ADC, thus
it keeps spec->adc_nids = NULL.  This causes an Oops in alc_build_controls().

Reference: kernel bug #16156
	https://bugzilla.kernel.org/show_bug.cgi?id=16156

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch add's the iMac7,1 SSID entry to
patch_realtek.c which adds sound support.
bug entry:
    https://bugs.launchpad.net/mactel-support/+bug/360866

Note:I do not have this machine on hand only
codec#0 file for the machine so please
test if you have the appropriate equipment.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch add's the MacBookAir1,1 SSID entry to
patch_realtek.c which adds sound support.
bug entry:
    https://bugs.launchpad.net/mactel-support/+bug/268301

Note:I do not have this machine on hand only
codec#0 file for the machine so please
test if you have the appropriate equipment.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This adds the SSID number to snd_pci_quirk for the
MacBookAir2,1 taken from codec#0 at:
    http://launchpadlibrarian.net/49455483/Card0.Codecs.codec.0.txt

keep in mind I do not have one of these machines on hand
so please if you do have this machine please test for me..
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix remaining racy updates of EXT4_I(inode)->i_flags
  ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files

A few functions were still modifying i_flags in a racy manner.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: improve xfs_isilocked
  xfs: skip writeback from reclaim context
  xfs: remove done roadmap item from xfs-delayed-logging-design.txt
  xfs: fix race in inode cluster freeing failing to stale inodes
  xfs: fix access to upper inodes without inode64
  xfs: fix might_sleep() warning when initialising per-ag tree
  fs/xfs/quota: Add missing mutex_unlock
  xfs: remove duplicated #include
  xfs: convert more trace events to DEFINE_EVENT
  xfs: xfs_trace.c: remove duplicated #include
  xfs: Check new inode size is OK before preallocating
  xfs: clean up xlog_align
  xfs: cleanup log reservation calculactions
  xfs: be more explicit if RT mount fails due to config
  xfs: replace E2BIG with EFBIG where appropriate

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
  X25: remove duplicated #include
  tcp: use correct net ns in cookie_v4_check()
  rps: tcp: fix rps_sock_flow_table table updates
  ppp_generic: fix multilink fragment sizes
  syncookies: remove Kconfig text line about disabled-by-default
  ixgbe: only check pfc bits in hang logic if pfc is enabled
  net: check for refcount if pop a stacked dst_entry
  ixgbe: return IXGBE_ERR_RAR_INDEX when out of range
  act_pedit: access skb->data safely
  sfc: Store port number in net_device::dev_id
  epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIAN
  tehuti: return -EFAULT on copy_to_user errors
  isdn/kcapi: return -EFAULT on copy_from_user errors
  e1000e: change logical negate to bitwise
  sfc: Get port number from CS_PORT_NUM, not PCI function number
  cls_u32: use skb_header_pointer() to dereference data safely
  TCP: tcp_hybla: Fix integer overflow in slow start increment
  act_nat: fix the wrong checksum when addr isn't in old_addr/mask
  net/fec: fix pm to survive to suspend/resume
  korina: count RX DMA OVR as rx_fifo_error
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: remove obsolete declarations of cache constructor and destructor
  nilfs2: fix style issue in nilfs_destroy_cachep

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Minix: Clean up left over label
  fix truncate inode time modification breakage
  fix setattr error handling in sysfs, configfs
  fcntl: return -EFAULT if copy_to_user fails
  wrong type for 'magic' argument in simple_fill_super()
  fix the deadlock in qib_fs
  mqueue doesn't need make_bad_inode()

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix bne2 "gave up waiting for init of module libcrc32c"
  module: verify_export_symbols under the lock
  module: move find_module check to end
  module: make locking more fine-grained.
  module: Make module sysfs functions private.
  module: move sysfs exposure to end of load_module
  module: fix kdb's illicit use of struct module_use.
  module: Make the 'usage' lists be two-way

Problem: it's hard to avoid an init routine stumbling over a
request_module these days.  And it's not clear it's always a bad idea:
for example, a module like kvm with dynamic dependencies on kvm-intel
or kvm-amd would be neater if it could simply request_module the right
one.

In this particular case, it's libcrc32c:

	libcrc32c_mod_init
	 crypto_alloc_shash
	  crypto_alloc_tfm
	   crypto_find_alg
	    crypto_alg_mod_lookup
	     crypto_larval_lookup
	      request_module

If another module is waiting inside resolve_symbol() for libcrc32c to
finish initializing (ie. bne2 depends on libcrc32c) then it does so
holding the module lock, and our request_module() can't make progress
until that is released.

Waiting inside resolve_symbol() without the lock isn't all that hard:
we just need to pass the -EBUSY up the call chain so we can sleep
where we don't hold the lock.  Error reporting is a bit trickier: we
need to copy the name of the unfinished module before releasing the
lock.

Other notes:
1) This also fixes a theoretical issue where a weak dependency would allow
   symbol version mismatches to be ignored.
2) We rename use_module to ref_module to make life easier for the only
   external user (the out-of-tree ksplice patches).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Abbot <tabbott@ksplice.com>
Tested-by: Brandon Philips <bphilips@suse.de>

It disabled preempt so it was "safe", but nothing stops another module
slipping in before this module is added to the global list now we don't
hold the lock the whole time.

So we check this just after we check for duplicate modules, and just
before we put the module in the global list.

(find_symbol finds symbols in coming and going modules, too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

I think Rusty may have made the lock a bit _too_ finegrained there, and
didn't add it to some places that needed it. It looks, for example, like
PATCH 1/2 actually drops the lock in places where it's needed
("find_module()" is documented to need it, but now load_module() didn't
hold it at all when it did the find_module()).

Rather than adding a new "module_loading" list, I think we should be able
to just use the existing "modules" list, and just fix up the locking a
bit.

In fact, maybe we could just move the "look up existing module" a bit
later - optimistically assuming that the module doesn't exist, and then
just undoing the work if it turns out that we were wrong, just before
adding ourselves to the list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Kay Sievers <kay.sievers@vrfy.org> reports that we still have some
contention over module loading which is slowing boot.

Linus also disliked a previous "drop lock and regrab" patch to fix the
bne2 "gave up waiting for init of module libcrc32c" message.

This is more ambitious: we only grab the lock where we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>

These were placed in the header in ef665c1a to get the various
SYSFS/MODULE config combintations to compile.

That may have been necessary then, but it's not now.  These functions
are all local to module.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <randy.dunlap@oracle.com>

This means a little extra work, but is more logical: we don't put
anything in sysfs until we're about to put the module into the
global list an parse its parameters.

This also gives us a logical place to put duplicate module detection
in the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Linus changed the structure, and luckily this didn't compile any more.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>

When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.

It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".

In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module.  But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.

By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)

Remove duplicated #include('s) in drivers/net/wan/x25_asy.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Its better to make a route lookup in appropriate namespace.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I believe a moderate SYN flood attack can corrupt RFS flow table
(rps_sock_flow_table), making RPS/RFS much less effective.

Even in a normal situation, server handling short lived sessions suffer
from bad steering for the first data packet of a session, if another SYN
packet is received for another session.

We do following action in tcp_v4_rcv() :

	sock_rps_save_rxhash(sk, skb->rxhash);

We should _not_ do this if sk is a LISTEN socket, as about each
packet received on a LISTEN socket has a different rxhash than
previous one.
 -> RPS_NO_CPU markers are spread all over rps_sock_flow_table.

Also, it makes sense to protect sk->rxhash field changes with socket
lock (We currently can change it even if user thread owns the lock
and might use rxhash)

This patch moves sock_rps_save_rxhash() to a sock locked section,
and only for non LISTEN sockets.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix bug in multilink fragment size calculation introduced by
commit 9c705260
"ppp: ppp_mp_explode() redesign"
Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

syncookies default to on since
e994b7c9
(tcp: Don't make syn cookies initial setting depend on CONFIG_SYSCTL).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only check pfc bits in hang logic if PFC is enabled.  Previously,
if DCB was enabled but PFC was disabled the incorrect pause
bits would be checked.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm triggers a warning if dst_pop() drops a refcount
on a noref dst. This patch changes dst_pop() to
skb_dst_pop(). skb_dst_pop() drops the refcnt only
on a refcounted dst. Also we don't clone the child
dst_entry, so it is not refcounted and we can use
skb_dst_set_noref() in xfrm_output_one().
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add Cintiq 21UX2 and Intuos4 WL
  Input: ads7846 - fix compiler warning in ads7846_probe()
  Input: tps6507x-ts - a couple work queue cleanups
  Input: s3c2410_ts - tone down logging
  Input: s3c2410_ts - fix build error due to ADC Kconfig rename

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: Make intc messages consistent via pr_fmt.
  sh: make sure static declaration on ms7724se
  sh: make sure static declaration on mach-migor
  sh: make sure static declaration on mach-ecovec24
  sh: make sure static declaration on mach-ap325rxa
  clocksource: sh_cmt: compute mult and shift before registration
  clocksource: sh_tmu: compute mult and shift before registration
  sh: PIO disabling for x3proto and urquell.
  sh: mach-sdk7786: conditionally disable PIO support.
  sh: support for platforms without PIO.
  usb: r8a66597-hcd pio to mmio accessor conversion.
  usb: gadget: r8a66597-udc pio to mmio accessor conversion.
  usb: gadget: m66592-udc pio to mmio accessor conversion.
  sh: add romImage MMCIF boot for sh7724 and Ecovec V2
  sh: add boot code to MMCIF driver header
  sh: prepare MMCIF driver header file
  sh: allow romImage data between head.S and the zero page
  sh: Add support MMCIF for ecovec
  sh: remove duplicated #include
  input: serio: disable i8042 for non-cayman sh platforms.
  ...

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (83 commits)
  i7core_edac: Better describe the supported devices
  Add support for Westmere to i7core_edac driver
  i7core_edac: don't free on success
  i7core_edac: Add support for X5670
  Always call i7core_[ur]dimm_check_mc_ecc_err
  i7core_edac: fix memory leak of i7core_dev
  EDAC: add __init to i7core_xeon_pci_fixup
  i7core_edac: Fix wrong device id for channel 1 devices
  i7core: add support for Lynnfield alternate address
  i7core_edac: Add initial support for Lynnfield
  i7core_edac: do not export static functions
  edac: fix i7core build
  edac: i7core_edac produces undefined behaviour on 32bit
  i7core_edac: Use a more generic approach for probing PCI devices
  i7core_edac: PCI device is called NONCORE, instead of NOCORE
  i7core_edac: Fix ringbuffer maxsize
  i7core_edac: First store, then increment
  i7core_edac: Better parse "any" addrmask
  i7core_edac: Use a lockless ringbuffer
  edac: Create an unique instance for each kobj
  ...

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (87 commits)
  V4L/DVB: ivtv: Timing tweaks and code re-order to try and improve stability
  V4L/DVB: ivtv: Avoid accidental video standard change
  V4L/DVB: ivtvfb : Module load / unload fixes
  V4L/DVB: cx2341x: Report correct temporal setting for log-status
  V4L/DVB: cx18, cx23885, v4l2 doc, MAINTAINERS: Update Andy Walls' email address
  V4L/DVB: drivers/media: Eliminate a NULL pointer dereference
  V4L/DVB: dvb-core: Fix ULE decapsulation bug
  V4L/DVB: Bug fix: make IR work again for dm1105
  V4L/DVB: media/IR: nec-decoder needs to select BITREV
  V4L/DVB: video/saa7134: change dprintk() to i2cdprintk()
  V4L/DVB: video/saa7134: remove duplicate break
  V4L/DVB: IR/imon: add auto-config for 0xffdc rf device
  V4L/DVB: IR/imon: clean up usage of bools
  V4L/DVB: em28xx: remove unneeded null checks
  V4L/DVB: ngene: remove unused #include <linux/version.h>
  V4L/DVB: ak881x needs slab.h
  V4L/DVB: FusionHDTV: Use quick reads for I2C IR device probing
  V4L/DVB: Technotrend S2-3200 ships with a TT 1500 remote
  V4L/DVB: drivers/media: Use kzalloc
  V4L/DVB: m920x: Select simple tuner
  ...

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (27 commits)
  block: make blk_init_free_list and elevator_init idempotent
  block: avoid unconditionally freeing previously allocated request_queue
  pipe: change /proc/sys/fs/pipe-max-pages to byte sized interface
  pipe: change the privilege required for growing a pipe beyond system max
  pipe: adjust minimum pipe size to 1 page
  block: disable preemption before using sched_clock()
  cciss: call BUG() earlier
  Preparing 8.3.8rc2
  drbd: Reduce verbosity
  drbd: use drbd specific ratelimit instead of global printk_ratelimit
  drbd: fix hang on local read errors while disconnected
  drbd: Removed the now empty w_io_error() function
  drbd: removed duplicated #includes
  drbd: improve usage of MSG_MORE
  drbd: need to set socket bufsize early to take effect
  drbd: improve network latency, TCP_QUICKACK
  drbd: Revert "drbd: Create new current UUID as late as possible"
  brd: support discard
  Revert "writeback: fix WB_SYNC_NONE writeback from umount"
  Revert "writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync"
  ...