- 11 Apr, 2022 5 commits
-
-
Kuogee Hsieh authored
There is possible circular locking dependency detected on event_mutex (see below logs). This is due to set fail safe mode is done at dp_panel_read_sink_caps() within event_mutex scope. To break this possible circular locking, this patch move setting fail safe mode out of event_mutex scope. [ 23.958078] ====================================================== [ 23.964430] WARNING: possible circular locking dependency detected [ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1 #148 Not tainted [ 23.977219] ------------------------------------------------------ [ 23.983570] DrmThread/1574 is trying to acquire lock: [ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164 [ 23.997895] [ 23.997895] but task is already holding lock: [ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c [ 24.012495] [ 24.012495] which lock already depends on the new lock. [ 24.012495] [ 24.020886] [ 24.020886] the existing dependency chain (in reverse order) is: [ 24.028570] [ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}: [ 24.035472] __mutex_lock+0xc8/0x384 [ 24.039695] mutex_lock_nested+0x54/0x74 [ 24.044272] lock_crtcs+0x80/0x8c [ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.053413] commit_tail+0x7c/0xfc [ 24.057452] drm_atomic_helper_commit+0x158/0x15c [ 24.062826] drm_atomic_commit+0x60/0x74 [ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.072508] drm_ioctl_kernel+0xe8/0x168 [ 24.077086] drm_ioctl+0x320/0x370 [ 24.081123] drm_compat_ioctl+0x40/0xdc [ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.090895] invoke_syscall+0x80/0x114 [ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.100668] do_el0_svc_compat+0x2c/0x54 [ 24.105242] el0_svc_compat+0x4c/0xe4 [ 24.109548] el0t_32_sync_handler+0xc4/0xf4 [ 24.114381] el0t_32_sync+0x178 [ 24.118688] [ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}: [ 24.125408] __mutex_lock+0xc8/0x384 [ 24.129628] mutex_lock_nested+0x54/0x74 [ 24.134204] lock_crtcs+0x80/0x8c [ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.143345] commit_tail+0x7c/0xfc [ 24.147382] drm_atomic_helper_commit+0x158/0x15c [ 24.152755] drm_atomic_commit+0x60/0x74 [ 24.157323] drm_atomic_helper_set_config+0x68/0x90 [ 24.162869] drm_mode_setcrtc+0x394/0x648 [ 24.167535] drm_ioctl_kernel+0xe8/0x168 [ 24.172102] drm_ioctl+0x320/0x370 [ 24.176135] drm_compat_ioctl+0x40/0xdc [ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.185904] invoke_syscall+0x80/0x114 [ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.195673] do_el0_svc_compat+0x2c/0x54 [ 24.200241] el0_svc_compat+0x4c/0xe4 [ 24.204544] el0t_32_sync_handler+0xc4/0xf4 [ 24.209378] el0t_32_sync+0x174/0x178 [ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}: [ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878 [ 24.225951] ww_mutex_lock+0x60/0xd0 [ 24.230166] modeset_lock+0x190/0x19c [ 24.234467] drm_modeset_lock+0x34/0x54 [ 24.238953] drmm_mode_config_init+0x550/0x764 [ 24.244065] msm_drm_bind+0x170/0x59c [ 24.248374] try_to_bring_up_master+0x244/0x294 [ 24.253572] __component_add+0xf4/0x14c [ 24.258057] component_add+0x2c/0x38 [ 24.262273] dsi_dev_attach+0x2c/0x38 [ 24.266575] dsi_host_attach+0xc4/0x120 [ 24.271060] mipi_dsi_attach+0x34/0x48 [ 24.275456] devm_mipi_dsi_attach+0x28/0x68 [ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc [ 24.285137] auxiliary_bus_probe+0x78/0x90 [ 24.289893] really_probe+0x1e4/0x3d8 [ 24.294194] __driver_probe_device+0x14c/0x164 [ 24.299298] driver_probe_device+0x54/0xf8 [ 24.304043] __device_attach_driver+0xb4/0x118 [ 24.309145] bus_for_each_drv+0xb0/0xd4 [ 24.313628] __device_attach+0xcc/0x158 [ 24.318112] device_initial_probe+0x24/0x30 [ 24.322954] bus_probe_device+0x38/0x9c [ 24.327439] deferred_probe_work_func+0xd4/0xf0 [ 24.332628] process_one_work+0x2f0/0x498 [ 24.337289] process_scheduled_works+0x44/0x48 [ 24.342391] worker_thread+0x1e4/0x26c [ 24.346788] kthread+0xe4/0xf4 [ 24.350470] ret_from_fork+0x10/0x20 [ 24.354683] [ 24.354683] [ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}: [ 24.361489] drm_modeset_acquire_init+0xe4/0x138 [ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114 [ 24.372327] check_connector_changed+0xbc/0x198 [ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c [ 24.382804] dsi_hpd_worker+0x24/0x30 [ 24.387104] process_one_work+0x2f0/0x498 [ 24.391762] worker_thread+0x1d0/0x26c [ 24.396158] kthread+0xe4/0xf4 [ 24.399840] ret_from_fork+0x10/0x20 [ 24.404053] [ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}: [ 24.411032] __mutex_lock+0xc8/0x384 [ 24.415247] mutex_lock_nested+0x54/0x74 [ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c [ 24.425108] dp_display_process_hpd_high+0x34/0xd4 [ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c [ 24.436205] hpd_event_thread+0x2ac/0x550 [ 24.440864] kthread+0xe4/0xf4 [ 24.444544] ret_from_fork+0x10/0x20 [ 24.448757] [ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}: [ 24.455116] __lock_acquire+0xe2c/0x10d8 [ 24.459690] lock_acquire+0x1ac/0x2d0 [ 24.463988] __mutex_lock+0xc8/0x384 [ 24.468201] mutex_lock_nested+0x54/0x74 [ 24.472773] msm_dp_display_enable+0x58/0x164 [ 24.477789] dp_bridge_enable+0x24/0x30 [ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c [ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244 [ 24.494801] msm_atomic_commit_tail+0x248/0x3d0 [ 24.499992] commit_tail+0x7c/0xfc [ 24.504031] drm_atomic_helper_commit+0x158/0x15c [ 24.509404] drm_atomic_commit+0x60/0x74 [ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.519079] drm_ioctl_kernel+0xe8/0x168 [ 24.523650] drm_ioctl+0x320/0x370 [ 24.527689] drm_compat_ioctl+0x40/0xdc [ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.537463] invoke_syscall+0x80/0x114 [ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.547235] do_el0_svc_compat+0x2c/0x54 [ 24.551806] el0_svc_compat+0x4c/0xe4 [ 24.556106] el0t_32_sync_handler+0xc4/0xf4 [ 24.560948] el0t_32_sync+0x174/0x178 Changes in v2: -- add circular lockiing trace Fixes: d4aca422 ("drm/msm/dp: always add fail-safe mode into connector mode list") Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481396/ Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.comSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Stephen Boyd authored
The member 'msm_dsi->connector' isn't assigned until msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and how it assigns the return value). Therefore this pointer is going to be NULL here. Let's use 'connector' which is what was intended. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 6d5e7840 ("drm/msm/dsi: Move dsi panel init into modeset init path") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Robin Murphy authored
Even if some IOMMU has registered itself on the platform "bus", that doesn't necessarily mean it provides translation for the device we care about. Replace iommu_present() with a more appropriate check. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/480707/ Link: https://lore.kernel.org/r/5ab4f4574d7f3e042261da702d493ee40d003356.1649168268.git.robin.murphy@arm.comSigned-off-by:
-
Xiaoke Wang authored
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Besides, since mdp5_plane_reset() is void type, so we should better set `plane-state` to NULL after releasing it. Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Reviewed-by:
-
Rob Clark authored
The fourth param is size, rather than range_end. Note that we could increase the address space size if we had a way to prevent buffers from spanning a 4G split, mostly just to avoid fw bugs with 64b math. Fixes: 84c31ee1 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by:
-
- 06 Apr, 2022 2 commits
-
-
Marijn Suijten authored
While there's a comment pointing from dpu_intr_set to dpu_hw_intr_reg and vice-versa, an array initializer using indices makes it so that the indices between the enum and array cannot possibly get out of sync even if they're accidentially ordered wrongly. It is still useful to keep the comment to be made aware where the register offset mapping resides while looking at dpu_hw_intr_reg. Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
Xiaoke Wang authored
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/tencent_B3E19486FF39415098B572B7397C2936C309@qq.comSigned-off-by:
-
- 24 Mar, 2022 5 commits
-
-
Dmitry Baryshkov authored
Make dpu-qcm2290 example really follow the defined schema: - Drop qcom,mdss compatible. It's only used for MDP5 devices. - Change display controller name to display-controller as specified in the yaml Reported-by:
Rob Herring <robh@kernel.org> Cc: Loic Poulain <loic.poulain@linaro.org> Fixes: 164f69d9 ("dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220324115536.2090818-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Rob Clark authored
Fixes: 25faf2f2 ("drm/msm: Show process names in gem_describe") Signed-off-by:
-
Rob Clark authored
The mutex wasn't really protecting anything before. Before the previous patch we could still be racing with the scheduler's kthread, as that is not necessarily frozen yet. Now that we've parked the sched threads, the only race is with jobs retiring, and that is harmless, ie. Signed-off-by:
-
Rob Clark authored
In the system suspend path, we don't want to be racing with the scheduler kthreads pushing additional queued up jobs to the hw queue (ringbuffer). So park them first. While we are at it, move the wait for active jobs to complete into the new system- suspend path. Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
- 08 Mar, 2022 2 commits
-
-
Rob Clark authored
Avoid going down devfreq paths on devices where devfreq is not initialized. v2: Change has_devfreq() logic [Dmitry] Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Reported-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Dan Carpenter authored
These casts need to happen before the shift. The only time it would matter would be if "rev.core" is >= 128. In that case the sign bit would be extended and we do not want that. Fixes: afab9d91 ("drm/msm/adreno: Expose speedbin to userspace") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220307133105.GA17534@kiliSigned-off-by:
-
- 07 Mar, 2022 1 commit
-
-
Rob Clark authored
refcount_t complains about 0->1 transitions, which isn't *quite* what we wanted. So use dirtyfb==1 to mean that the fb is not connected to any output that requires dirtyfb flushing, so that we can keep the underflow and overflow checking. Fixes: 9e4dde28 ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)") Signed-off-by:
-
- 05 Mar, 2022 2 commits
-
-
Rob Clark authored
Fixes: f6d62d09 ("drm/msm/a6xx: add support for Adreno 660 GPU") Signed-off-by:
-
Rob Clark authored
Add a way for userspace to specify the sequence number fence used to track completion of the submit. As the seqno fence is simply an incrementing counter which is local to the submitqueue, it is easy for userspace to know the next value. This is useful for native userspace drivers in a vm guest, as the guest to host roundtrip can have high latency. Assigning the fence seqno in the guest userspace allows the guest to continue without waiting for response from the host. Signed-off-by:
-
- 04 Mar, 2022 4 commits
-
-
Rob Clark authored
Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc) does not require counters to maintain state across context switches. So clear them if systemwide profiling is not active. Signed-off-by:
-
Rob Clark authored
Add a SYSPROF param for system profiling tools like Mesa's pps-producer (perfetto) to control behavior related to system-wide performance counter collection. In particular, for profiling, one wants to ensure that GPU context switches do not effect perfcounter state, and might want to suppress suspend (which would cause counters to lose state). v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and initialize the sysprof_active refcount to one (because the under/ overflow checking in refcount_t doesn't expect a 0->1 transition) meaning that values greater than 1 means sysprof is active. Signed-off-by: -
Rob Clark authored
It was always expected to have a use for this some day, so we left a placeholder. Now we do. (And I expect another use in the not too distant future when we start allowing userspace to allocate GPU iova.) Signed-off-by:
-
Rob Clark authored
Update headers from mesa commit: commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef Author: Rob Clark <robclark@freedesktop.org> AuthorDate: Wed Mar 2 17:11:10 2022 -0800 freedreno/registers: Add a couple regs we need for kernel Signed-off-by:
-
- 03 Mar, 2022 1 commit
-
-
Dmitry Baryshkov authored
Add missing brace in dpu-qcm2290.yaml. While we are at it, also fix indentation for another brace, so it matches the corresponding line. Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
- 02 Mar, 2022 1 commit
-
-
Rob Herring authored
The MDSS interrupt provider is a single cell, so specifying interrupt flags on the consumers is incorrect. Signed-off-by:
-
- 25 Feb, 2022 5 commits
-
-
Akhil P Oommen authored
Expose speedbin through MSM_PARAM_CHIP_ID parameter to help userspace identify the sku. Signed-off-by:
-
Akhil P Oommen authored
Add support for 7c3 SKU detection using speedbin fuse. Signed-off-by:
-
Akhil P Oommen authored
Use a gpu name which is sprintf'ed from the chipid for 7c3 gpu instead of hardcoding one. This helps to avoid code churn in case of a gpu rename. Signed-off-by:
-
Akhil P Oommen authored
Use generic name for resources like irq and kthread instead of hardware specific name to make it easier to grep. Signed-off-by:
-
Rob Clark authored
Someone on IRC once asked an innocent enough sounding question: Why with xf86-video-modesetting is es2gears limited at 120fps. So I broke out the perfetto tracing mesa MR and took a look. It turns out the problem was drm_atomic_helper_dirtyfb(), which would end up waiting for vblank.. es2gears would rapidly push two frames to Xorg, which would blit them to screen and in idle hook (I assume) call the DIRTYFB ioctl. Which in turn would do an atomic update to flush the dirty rects, which would stall until the next vblank. And then the whole process would repeat. But this is a bit silly, we only need dirtyfb for command mode DSI panels. So track in plane state whether dirtyfb is required, and track in the fb how many attached planes require dirtyfb so that we can skip it when not required. (Note, mdp4 does not actually have cmd mode support.) Signed-off-by:
-
- 23 Feb, 2022 7 commits
-
-
Dmitry Baryshkov authored
-
Dmitry Baryshkov authored
The commit adding msm8998 support didn't added msm8998's DSPP blocks configuration, but did not use them in msm8998_cfg_init(). Wire them up to be used for display post processing. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 94391a14 ("drm/msm/dpu1: Add MSM8998 to hw catalog") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Cc: Jami Kettunen <jami.kettunen@somainline.org> Signed-off-by:
-
Loic Poulain authored
QCM2290 MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks like DPU display controller, DSI etc. Add YAML schema for DPU device tree bindings Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Reviewed-by:
-
Loic Poulain authored
Add compatibility for QCM2290 display subsystem, including required entries in DPU hw catalog. Signed-off-by:
-
Loic Poulain authored
Add DSI block specific qcm2290 compatible string as valid Qualcomm DSI controller. Signed-off-by:
-
Loic Poulain authored
QCM2290 MDSS includes a Qualcomm DSI controller v2.4.1. Since this controller version is not SoC specific, and already assigned to sc7180 for auto configuration, we rely on DSI block specific compatible string "qcom,dsi-ctrl-6g-qcm2290", and use the device's data to point to the right dsi config handler. Signed-off-by:
-
Loic Poulain authored
Config autodetect based on DSI controller version is quite limited since several qcom SoCs can integrate a DSI controller with the same version, but with different config (io_offset, supplies, etc). This change allows to specify dsi config via device data pointer. config autodetect is still used in case data pointer is NULL. Signed-off-by:
-
- 20 Feb, 2022 2 commits
-
-
Rob Clark authored
Other processes don't need to know about faults that they are isolated from by virtue of address space isolation. They are only interested in whether some of their state might have been corrupted. But to be safe, also track unattributed faults. This case should really never happen unless there is a kernel bug (and that would never happen, right?) v2: Instead of adding a new param, just change the behavior of the existing param to match what userspace actually wants [anholt] Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5934Signed-off-by:Emma Anholt <emma@anholt.net> Signed-off-by:
-
Rob Clark authored
Prep work for next patch. Signed-off-by:
-
- 19 Feb, 2022 3 commits
-
-
Dmitry Baryshkov authored
Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
-
Dmitry Baryshkov authored
It is possible to supply display-connector (bridge) to the DP interface, add support for parsing it too. Signed-off-by:
-
Dmitry Baryshkov authored
Currently DP driver will allocate panel bridge for eDP panels. This supports only the following topology: - eDP encoder ⇒ eDP panel (wrapped using panel-bridge) Simplify this code to just check if there is any next bridge in the chain (be it a panel bridge or regular bridge). Rename panel_bridge field to next_bridge accordingly. This allows one to use e.g. one of the following display topologies: - eDP encoder ⇒ ptn3460 ⇒ fixed LVDS panel - eDP encoder ⇒ ptn3460 ⇒ LVDS connector with EDID lines for panel autodetect - eDP encoder ⇒ ptn3460 ⇒ THC63LVD1024 ⇒ DPI panel. - eDP encoder ⇒ LT8912 ⇒ DSI panel Signed-off-by:
-
