Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "LED core fixes and improvements:

      - avoid races with workqueue
      - Kconfig: pedantic cleanup
      - small fixes for Flash class description

  leds-lt3593:

      - remove unneeded assignment in lt3593_led_probe
      - drop pdata handling code

  leds-blinkm:

      - clean up double assignment to data->i2c_addr

  leds-pca955x, leds-pca963x:

      - revert ACPI support, as it turned out that there is no evidence
          of officially registered ACPI IDs for these devices.
      - make use of device property API

  leds-as3645a:

      - switch to fwnode property API

  LED related addition to ACPI documentation:

      - document how to refer to LEDs from remote nodes

  LED related fix to ALSA line6/toneport driver:

      - avoid polluting led_* namespace

  And lm3532 driver relocation from MFD to LED subsystem, accompanied by
  various improvements and optimizations; it entails also a change in
  omap4-droid4-xt894.dts:

      - leds: lm3532: Introduce the lm3532 LED driver
      - mfd: ti-lmu: Remove LM3532 backlight driver references
      - ARM: dts: omap4-droid4: Update backlight dt properties
      - dt: lm3532: Add lm3532 dt doc and update ti_lmu doc"

* tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: avoid races with workqueue
  ALSA: line6: Avoid polluting led_* namespace
  leds: lm3532: Introduce the lm3532 LED driver
  mfd: ti-lmu: Remove LM3532 backlight driver references
  ARM: dts: omap4-droid4: Update backlight dt properties
  dt: lm3532: Add lm3532 dt doc and update ti_lmu doc
  leds: Small fixes for Flash class description
  leds: blinkm: clean up double assignment to data->i2c_addr
  leds: pca963x: Make use of device property API
  leds: pca955x: Make use of device property API
  leds: lt3593: Remove unneeded assignment in lt3593_led_probe
  leds: lt3593: drop pdata handling code
  leds: pca955x: Revert "Add ACPI support"
  leds: pca963x: Revert "Add ACPI support"
  drivers: leds: Kconfig: pedantic cleanups
  ACPI: Document how to refer to LEDs from remote nodes
  leds: as3645a: Switch to fwnode property API

Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...

Merge tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 1 from Greg KH:
 "This contains only a small number of bugfixes that would have gone to
  you for 5.1-rc8 if that had happened, but instead I let them sit in
  linux-next for an extra week just "to be sure".

  The "big" patch here is for hyper-v, fixing a bug in their sysfs files
  that could cause big problems. The others are all small fixes,
  resolving reported issues that showed up in 5.1-rcs, plus some odd
  'static' cleanups for the phy drivers that really should have waited
  for -rc1. Most of these are tagged for the stable trees, so 5.1 will
  pick them up.

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fixed rts5260 power saving parameter and sd glitch
  binder: take read mode of mmap_sem in binder_alloc_free_page()
  intel_th: pci: Add Comet Lake support
  stm class: Fix channel bitmap on 32-bit systems
  stm class: Fix channel free in stm output free path
  phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
  phy: fix platform_no_drv_owner.cocci warnings
  phy: mapphone-mdm6600: add gpiolib dependency
  phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
  phy: allwinner: allow compile testing
  phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
  phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
  phy: phy-twl4030-usb: Fix cable state handling
  Drivers: hv: vmbus: Remove the undesired put_cpu_ptr() in hv_synic_cleanup()
  Drivers: hv: vmbus: Fix race condition with new ring_buffer_info mutex
  Drivers: hv: vmbus: Set ring_info field to 0 and remove memset
  Drivers: hv: vmbus: Refactor chan->state if statement
  Drivers: hv: vmbus: Expose monitor data only when monitor pages are used

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and iio driver update for 5.2-rc1.

  Lots of tiny fixes all over the staging and IIO driver trees here,
  along with some new IIO drivers.

  The "counter" subsystem was added in here as well, as it is needed by
  the IIO drivers and subsystem.

  Also we ended up deleting two drivers, making this pull request remove
  a few hundred thousand lines of code, always a nice thing to see. Both
  of the drivers removed have been replaced with "real" drivers in their
  various subsystem directories, and they will be coming to you from
  those locations during this merge window.

  There are some core vt/selection changes in here, that was due to some
  cleanups needed for the speakup fixes. Those have all been acked by
  the various subsystem maintainers (i.e. me), so those are ok.

  We also added a few new drivers, for some odd hardware, giving new
  developers plenty to work on with basic coding style cleanups to come
  in the near future.

  Other than that, nothing unusual here.

  All of these have been in linux-next for a while with no reported
  issues, other than an odd gcc warning for one of the new drivers that
  should be fixed up soon"

[ I fixed up the warning myself  - Linus ]

* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
  staging: kpc2000: kpc_spi: Fix build error for {read,write}q
  Staging: rtl8192e: Remove extra space before break statement
  Staging: rtl8192u: ieee80211: Fix if-else indentation warning
  Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
  staging: most: cdev: fix chrdev_region leak in mod_exit
  staging: wlan-ng: Fix improper SPDX comment style
  staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
  staging: vc04_services: bcm2835-camera: Compress two lines into one line
  staging: rtl8723bs: core: Use !x in place of NULL comparison.
  staging: rtl8723bs: core: Prefer using the BIT Macro.
  staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
  staging: kpc2000: fix up build problems with readq()
  staging: rtlwifi: move remaining phydm .h files
  staging: rtlwifi: strip down phydm .h files
  staging: rtlwifi: delete the staging driver
  staging: fieldbus: anybus-s: rename bus id field to avoid confusion
  staging: fieldbus: anybus-s: keep device bus id in bus endianness
  Staging: sm750fb: Change *array into *const array
  staging: rtl8192u: ieee80211: Fix spelling mistake
  staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
  ...

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a few memoryleaks
   - Minor improvements to the card initialization sequence
   - Partially support sleepy GPIO controllers for pwrseq eMMC

  MMC host:
   - alcor: Work with multiple-entry sglists
   - alcor: Enable DMA for writes
   - meson-gx: Improve tuning support
   - meson-gx: Avoid clock glitch when switching to DDR modes
   - meson-gx: Disable unreliable HS400 mode
   - mmci: Minor updates for support of HW busy detection
   - mmci: Support data transfers for the stm32_sdmmc variant
   - mmci: Restructure code to better support different variants
   - mtk-sd: Add support for version found on MT7620 family SOCs
   - mtk-sd: Add support for the MT8516 version
   - mtk-sd: Add Chaotian Jing as the maintainer
   - sdhci: Reorganize request-code to convert from tasklet to workqueue
   - sdhci_am654: Stabilize support for lower speed modes
   - sdhci-esdhc-imx: Add HS400 support for iMX7ULP
   - sdhci-esdhc-imx: Add support for iMX7ULP version
   - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
   - sdhci-of-esdhc: Add support for the ls1028a version
   - sdhci-of-esdhc: Several fixups for errata
   - sdhci-pci: Fix BYT OCP setting
   - sdhci-pci: Add support for Intel CML
   - sdhci-tegra: Add support for system suspend/resume
   - sdhci-tegra: Add CQE support for Tegra186 WAR
   - sdhci-tegra: Add support for Tegra194
   - sdhci-tegra: Update HW tuning process

  MEMSTICK:
   - I volunteered to help as a maintainer for the memstick subsystem,
     which is reflected by an update to the MAINTAINERS file. Changes
     are funneled through my MMC git and we will use the linux-mmc
     mailing list.

  MEMSTICK host:
   - A few minor cleanups"

* tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits)
  mmc: sdhci-pci: Fix BYT OCP setting
  dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
  mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host
  mmc: mtk-sd: select REGULATOR
  mmc: mtk-sd: enable internal card-detect logic.
  mmc: mtk-sd: add support for config found in mt7620 family SOCs.
  mmc: mtk-sd: don't hard-code interrupt trigger type
  mmc: core: Fix tag set memory leak
  dt-bindings: mmc: Add support for MT8516 to mtk-sd
  mmc: mmci: Prevent polling for busy detection in IRQ context
  mmc: mmci: Cleanup mmci_cmd_irq() for busy detect
  mmc: usdhi6rol0: mark expected switch fall-throughs
  mmc: core: Verify SD bus width
  mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
  mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle
  dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
  mmc: meson-gx: add signal resampling tuning
  mmc: meson-gx: remove Rx phase tuning
  mmc: meson-gx: avoid clock glitch when switching to DDR modes
  mmc: meson-gx: disable HS400
  ...

Merge tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva:
 "Mark switch cases where we are expecting to fall through.

  This is part of the ongoing efforts to enable -Wimplicit-fallthrough.

  Most of them have been baking in linux-next for a whole development
  cycle. And with Stephen Rothwell's help, we've had linux-next
  nag-emails going out for newly introduced code that triggers
  -Wimplicit-fallthrough to avoid gaining more of these cases while we
  work to remove the ones that are already present.

  We are getting close to completing this work. Currently, there are
  only 32 of 2311 of these cases left to be addressed in linux-next. I'm
  auditing every case; I take a look into the code and analyze it in
  order to determine if I'm dealing with an actual bug or a false
  positive, as explained here:

      https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/

  While working on this, I've found and fixed the several missing
  break/return bugs, some of them introduced more than 5 years ago.

  Once this work is finished, we'll be able to universally enable
  "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
  entering the kernel again"

* tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
  memstick: mark expected switch fall-throughs
  drm/nouveau/nvkm: mark expected switch fall-throughs
  NFC: st21nfca: Fix fall-through warnings
  NFC: pn533: mark expected switch fall-throughs
  block: Mark expected switch fall-throughs
  ASN.1: mark expected switch fall-through
  lib/cmdline.c: mark expected switch fall-throughs
  lib: zstd: Mark expected switch fall-throughs
  scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through
  scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs
  scsi: ppa: mark expected switch fall-through
  scsi: osst: mark expected switch fall-throughs
  scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_nvme: Mark expected switch fall-through
  scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through
  scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_els: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs
  scsi: imm: mark expected switch fall-throughs
  scsi: csiostor: csio_wr: mark expected switch fall-through
  ...

Pull compiler-based variable initialization updates from Kees Cook:
 "This is effectively part of my gcc-plugins tree, but as this adds some
  Clang support, it felt weird to still call it "gcc-plugins". :)

  This consolidates Kconfig for the existing stack variable
  initialization (via structleak and stackleak gcc plugins) and adds
  Alexander Potapenko's support for Clang's new similar functionality.

  Summary:

   - Consolidate memory initialization Kconfigs (Kees)

   - Implement support for Clang's stack variable auto-init (Alexander)"

* tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  security: Implement Clang's stack initialization
  security: Move stackleak config to Kconfig.hardening
  security: Create "kernel hardening" config area

Pull pidfd updates from Christian Brauner:
 "This patchset makes it possible to retrieve pidfds at process creation
  time by introducing the new flag CLONE_PIDFD to the clone() system
  call. Linus originally suggested to implement this as a new flag to
  clone() instead of making it a separate system call.

  After a thorough review from Oleg CLONE_PIDFD returns pidfds in the
  parent_tidptr argument. This means we can give back the associated pid
  and the pidfd at the same time. Access to process metadata information
  thus becomes rather trivial.

  As has been agreed, CLONE_PIDFD creates file descriptors based on
  anonymous inodes similar to the new mount api. They are made
  unconditional by this patchset as they are now needed by core kernel
  code (vfs, pidfd) even more than they already were before (timerfd,
  signalfd, io_uring, epoll etc.). The core patchset is rather small.
  The bulky looking changelist is caused by David's very simple changes
  to Kconfig to make anon inodes unconditional.

  A pidfd comes with additional information in fdinfo if the kernel
  supports procfs. The fdinfo file contains the pid of the process in
  the callers pid namespace in the same format as the procfs status
  file, i.e. "Pid:\t%d".

  To remove worries about missing metadata access this patchset comes
  with a sample/test program that illustrates how a combination of
  CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free
  access to process metadata through /proc/<pid>.

  Further work based on this patchset has been done by Joel. His work
  makes pidfds pollable. It finished too late for this merge window. I
  would prefer to have it sitting in linux-next for a while and send it
  for inclusion during the 5.3 merge window"

* tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  samples: show race-free pidfd metadata access
  signal: support CLONE_PIDFD with pidfd_send_signal
  clone: add CLONE_PIDFD
  Make anon_inodes unconditional

Pull stream_open conversion from Kirill Smelkov:

 - remove unnecessary double nonseekable_open from drivers/char/dtlk.c
   as noticed by Pavel Machek while reviewing nonseekable_open ->
   stream_open mass conversion.

 - the mass conversion patch promised in commit 10dce8af ("fs:
   stream_open - opener for stream-like files so that read and write can
   run simultaneously without deadlock") and is automatically generated
   by running

        $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci

   I've verified each generated change manually - that it is correct to
   convert - and each other nonseekable_open instance left - that it is
   either not correct to convert there, or that it is not converted due
   to current stream_open.cocci limitations. More details on this in the
   patch.

 - finally, change VFS to pass ppos=NULL into .read/.write for files
   that declare themselves streams. It was suggested by Rasmus Villemoes
   and makes sure that if ppos starts to be erroneously used in a stream
   file, such bug won't go unnoticed and will produce an oops instead of
   creating illusion of position change being taken into account.

   Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to
   use stream_open()" that will be hopefully coming via FUSE tree,
   because fs/fuse/ uses new-style .read_iter/.write_iter, and for these
   accessors position is still passed as non-pointer kiocb.ki_pos .

* tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux:
  vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files
  *: convert stream-like files from nonseekable_open -> stream_open
  dtlk: remove double call to nonseekable_open

Pull xfs updates from Darrick Wong:
 "Here's a big pile of new stuff for XFS for 5.2. XFS has grown the
  ability to report metadata health status to userspace after online
  fsck checks the filesystem. The online metadata checking code is (I
  really hope) feature complete with the addition of checks for the
  global fs counters, though it'll remain EXPERIMENTAL for now.

  There are also fixes for thundering herds of writeback completions and
  some other deadlocks, fixes for theoretical integer overflow attacks
  on space accounting, and removal of the long-defunct 'mntpt' option
  which was deprecated in the mid-2000s and (it turns out) totally
  broken since 2011 (and nobody complained...).

  Summary:

   - Fix some more buffer deadlocks when performing an unmount after a
     hard shutdown.

   - Fix some minor space accounting issues.

   - Fix some use after free problems.

   - Make the (undocumented) FITRIM behavior consistent with other
     filesystems.

   - Embiggen the xfs geometry ioctl's data structure.

   - Introduce a new AG geometry ioctl.

   - Introduce a new online health reporting infrastructure and ioctl
     for userspace to query a filesystem's health status.

   - Enhance online scrub and repair to update the health reports.

   - Reduce thundering herd problems when writeback io completes.

   - Fix some transaction reservation type errors.

   - Fix integer overflow problems with delayed alloc reservation
     counters.

   - Fix some problems where we would exit to userspace without
     unlocking.

   - Fix inconsistent behavior when finishing deferred ops fails.

   - Strengthen scrub to check incore data against ondisk metadata.

   - Remove long-broken mntpt mount option.

   - Add an online scrub function for the filesystem summary counters,
     which should make online metadata scrub more or less feature
     complete for now.

   - Various cleanups"

* tag 'xfs-5.2-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (38 commits)
  xfs: change some error-less functions to void types
  xfs: add online scrub for superblock counters
  xfs: don't parse the mtpt mount option
  xfs: always rejoin held resources during defer roll
  xfs: add missing error check in xfs_prepare_shift()
  xfs: scrub should check incore counters against ondisk headers
  xfs: allow scrubbers to pause background reclaim
  xfs: rename the speculative block allocation reclaim toggle functions
  xfs: track delayed allocation reservations across the filesystem
  xfs: fix broken bhold behavior in xrep_roll_ag_trans
  xfs: unlock inode when xfs_ioctl_setattr_get_trans can't get transaction
  xfs: kill the xfs_dqtrx_t typedef
  xfs: widen inode delalloc block counter to 64-bits
  xfs: widen quota block counters to 64-bit integers
  xfs: abort unaligned nowait directio early
  xfs: assert that we don't enter agfl freeing with a non-permanent transaction
  xfs: make tr_growdata a permanent transaction
  xfs: merge adjacent io completions of the same type
  xfs: remove unused m_data_workqueue
  xfs: implement per-inode writeback completion queues
  ...

Pull iomap updates from Darrick Wong:
 "Nothing particularly exciting here, just adding some callouts for gfs2
  and cleaning a few things.

  Summary:

   - Add some extra hooks to the iomap buffered write path to enable
     gfs2 journalled writes

   - SPDX conversion

   - Various refactoring"

* tag 'iomap-5.2-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: move iomap_read_inline_data around
  iomap: Add a page_prepare callback
  iomap: Fix use-after-free error in page_done callback
  fs: Turn __generic_write_end into a void function
  iomap: Clean up __generic_write_end calling
  iomap: convert to SPDX identifier

Pull jfs updates from Dave Kleikamp:
 "Several minor jfs fixes"

* tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy:
  jfs: fix bogus variable self-initialization
  fs/jfs: Switch to use new generic UUID API
  jfs: compare old and new mode before setting update_mode flag
  jfs: remove incorrect comment in jfs_superblock
  jfs: fix spelling mistake, EACCESS -> EACCES

Pull btrfs updates from David Sterba:
 "This time the majority of changes are cleanups, though there's still a
  number of changes of user interest.

  User visible changes:

   - better read time and write checks to catch errors early and before
     writing data to disk (to catch potential memory corruption on data
     that get checksummed)

   - qgroups + metadata relocation: last speed up patch int the series
     to address the slowness, there should be no overhead comparing
     balance with and without qgroups

   - FIEMAP ioctl does not start a transaction unnecessarily, this can
     result in a speed up and less blocking due to IO

   - LOGICAL_INO (v1, v2) does not start transaction unnecessarily, this
     can speed up the mentioned ioctl and scrub as well

   - fsync on files with many (but not too many) hardlinks is faster,
     finer decision if the links should be fsynced individually or
     completely

   - send tries harder to find ranges to clone

   - trim/discard will skip unallocated chunks that haven't been touched
     since the last mount

  Fixes:

   - send flushes delayed allocation before start, otherwise it could
     miss some changes in case of a very recent rw->ro switch of a
     subvolume

   - fix fallocate with qgroups that could lead to space accounting
     underflow, reported as a warning

   - trim/discard ioctl honours the requested range

   - starting send and dedupe on a subvolume at the same time will let
     only one of them succeed, this is to prevent changes that send
     could miss due to dedupe; both operations are restartable

  Core changes:

   - more tree-checker validations, errors reported by fuzzing tools:
      - device item
      - inode item
      - block group profiles

   - tracepoints for extent buffer locking

   - async cow preallocates memory to avoid errors happening too deep in
     the call chain

   - metadata reservations for delalloc reworked to better adapt in
     many-writers/low-space scenarios

   - improved space flushing logic for intense DIO vs buffered workloads

   - lots of cleanups
      - removed unused struct members
      - redundant argument removal
      - properties and xattrs
      - extent buffer locking
      - selftests
      - use common file type conversions
      - many-argument functions reduction"

* tag 'for-5.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (227 commits)
  btrfs: Use kvmalloc for allocating compressed path context
  btrfs: Factor out common extent locking code in submit_compressed_extents
  btrfs: Set io_tree only once in submit_compressed_extents
  btrfs: Replace clear_extent_bit with unlock_extent
  btrfs: Make compress_file_range take only struct async_chunk
  btrfs: Remove fs_info from struct async_chunk
  btrfs: Rename async_cow to async_chunk
  btrfs: Preallocate chunks in cow_file_range_async
  btrfs: reserve delalloc metadata differently
  btrfs: track DIO bytes in flight
  btrfs: merge calls of btrfs_setxattr and btrfs_setxattr_trans in btrfs_set_prop
  btrfs: delete unused function btrfs_set_prop_trans
  btrfs: start transaction in xattr_handler_set_prop
  btrfs: drop local copy of inode i_mode
  btrfs: drop old_fsflags in btrfs_ioctl_setflags
  btrfs: modify local copy of btrfs_inode flags
  btrfs: drop useless inode i_flags copy and restore
  btrfs: start transaction in btrfs_ioctl_setflags()
  btrfs: export btrfs_set_prop
  btrfs: refactor btrfs_set_props to validate externally
  ...

Pull vfs stable fodder fixes from Al Viro:

 - acct_on() fix for deadlock caught by overlayfs folks

 - autofs RCU use-after-free SNAFU (->d_manage() can be called
   locklessly, so we need to RCU-delay freeing the objects it looks at)

 - (hopefully) the end of "do we need freeing this dentry RCU-delayed"
   whack-a-mole.

* 'stable-fodder' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs: fix use-after-free in lockless ->d_manage()
  dcache: sort the freeing-without-RCU-delay mess for good.
  acct_on(): don't mess with freeze protection

Pull vfs inode freeing updates from Al Viro:
 "Introduction of separate method for RCU-delayed part of
  ->destroy_inode() (if any).

  Pretty much as posted, except that destroy_inode() stashes
  ->free_inode into the victim (anon-unioned with ->i_fops) before
  scheduling i_callback() and the last two patches (sockfs conversion
  and folding struct socket_wq into struct socket) are excluded - that
  pair should go through netdev once davem reopens his tree"

* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
  orangefs: make use of ->free_inode()
  shmem: make use of ->free_inode()
  hugetlb: make use of ->free_inode()
  overlayfs: make use of ->free_inode()
  jfs: switch to ->free_inode()
  fuse: switch to ->free_inode()
  ext4: make use of ->free_inode()
  ecryptfs: make use of ->free_inode()
  ceph: use ->free_inode()
  btrfs: use ->free_inode()
  afs: switch to use of ->free_inode()
  dax: make use of ->free_inode()
  ntfs: switch to ->free_inode()
  securityfs: switch to ->free_inode()
  apparmor: switch to ->free_inode()
  rpcpipe: switch to ->free_inode()
  bpf: switch to ->free_inode()
  mqueue: switch to ->free_inode()
  ufs: switch to ->free_inode()
  coda: switch to ->free_inode()
  ...

Pull x86 FPU state handling updates from Borislav Petkov:
 "This contains work started by Rik van Riel and brought to fruition by
  Sebastian Andrzej Siewior with the main goal to optimize when to load
  FPU registers: only when returning to userspace and not on every
  context switch (while the task remains in the kernel).

  In addition, this optimization makes kernel_fpu_begin() cheaper by
  requiring registers saving only on the first invocation and skipping
  that in following ones.

  What is more, this series cleans up and streamlines many aspects of
  the already complex FPU code, hopefully making it more palatable for
  future improvements and simplifications.

  Finally, there's a __user annotations fix from Jann Horn"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails
  x86/pkeys: Add PKRU value to init_fpstate
  x86/fpu: Restore regs in copy_fpstate_to_sigframe() in order to use the fastpath
  x86/fpu: Add a fastpath to copy_fpstate_to_sigframe()
  x86/fpu: Add a fastpath to __fpu__restore_sig()
  x86/fpu: Defer FPU state load until return to userspace
  x86/fpu: Merge the two code paths in __fpu__restore_sig()
  x86/fpu: Restore from kernel memory on the 64-bit path too
  x86/fpu: Inline copy_user_to_fpregs_zeroing()
  x86/fpu: Update xstate's PKRU value on write_pkru()
  x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
  x86/fpu: Always store the registers in copy_fpstate_to_sigframe()
  x86/entry: Add TIF_NEED_FPU_LOAD
  x86/fpu: Eager switch PKRU state
  x86/pkeys: Don't check if PKRU is zero before writing it
  x86/fpu: Only write PKRU if it is different from current
  x86/pkeys: Provide *pkru() helpers
  x86/fpu: Use a feature number instead of mask in two more helpers
  x86/fpu: Make __raw_xsave_addr() use a feature number instead of mask
  x86/fpu: Add an __fpregs_load_activate() internal helper
  ...

Pull ktest updates from Steven Rostedt:
 "Minor updates to ktest.pl

   - Handle meta characters in grub memu

   - Use configurable reboot return code for handling ssh reboots

   - Display names and iteration number on error message"

* tag 'ktest-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: introduce REBOOT_RETURN_CODE to confirm the result of REBOOT
  ktest: Add support for meta characters in GRUB_MENU
  ktest: Show name and iteration on errors

Pull printk updates from Petr Mladek:

 - Allow state reset of printk_once() calls.

 - Prevent crashes when dereferencing invalid pointers in vsprintf().
   Only the first byte is checked for simplicity.

 - Make vsprintf warnings consistent and inlined.

 - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
   modifiers.

 - Some clean up of vsprintf and test_printf code.

* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Make function pointer_string static
  vsprintf: Limit the length of inlined error messages
  vsprintf: Avoid confusion between invalid address and value
  vsprintf: Prevent crash when dereferencing invalid pointers
  vsprintf: Consolidate handling of unknown pointer specifiers
  vsprintf: Factor out %pO handler as kobject_string()
  vsprintf: Factor out %pV handler as va_format()
  vsprintf: Factor out %p[iI] handler as ip_addr_string()
  vsprintf: Do not check address of well-known strings
  vsprintf: Consistent %pK handling for kptr_restrict == 0
  vsprintf: Shuffle restricted_pointer()
  printk: Tie printk_once / printk_deferred_once into .data.once for reset
  treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  lib/test_printf: Switch to bitmap_zalloc()

Pull livepatching updates from Jiri Kosina:

 - livepatching kselftests improvements from Joe Lawrence and Miroslav
   Benes

 - making use of gcc's -flive-patching option when available, from
   Miroslav Benes

 - kobject handling cleanups, from Petr Mladek

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Remove duplicated code for early initialization
  livepatch: Remove custom kobject state handling
  livepatch: Convert error about unsupported reliable stacktrace into a warning
  selftests/livepatch: Add functions.sh to TEST_PROGS_EXTENDED
  kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled
  selftests/livepatch: use TEST_PROGS for test scripts

Pull HID updates from Jiri Kosina:

 - support for U2F Zero device, from Andrej Shadura

 - logitech-dj has historically been treating devices behind
   non-unifying receivers as generic devices, using the HID emulation in
   the receiver. That had several shortcomings (special keys handling,
   battery level monitoring, etc). The driver has been reworked to
   enumarate (and directly communicate with) the devices behind the
   receiver, to avoid the (too) generic HID implementation in the
   receiver itself. All the work done by Benjamin Tissoires and Hans de
   Goede.

 - restructuring of intel-ish driver in order to allow for multiple
   clients of the ISH implementation, from Srinivas Pandruvada

 - several other smaller fixes and assorted device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (68 commits)
  HID: logitech-dj: fix spelling in printk
  HID: input: fix assignment of .value
  HID: input: make sure the wheel high resolution multiplier is set
  HID: logitech-dj: add usbhid dependency in Kconfig
  HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reports
  HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reports
  HID: logitech-hidpp: add support for HID++ 1.0 wheel reports
  HID: logitech-hidpp: make hidpp10_set_register_bit a bit more generic
  HID: logitech-hidpp: add input_device ptr to struct hidpp_device
  HID: logitech-hidpp: do not hardcode very long report length
  HID: logitech-hidpp: handle devices attached to 27MHz wireless receivers
  HID: logitech-hidpp: use RAP instead of FAP to get the protocol version
  HID: logitech-hidpp: remove unused origin_is_hid_core function parameter
  HID: logitech-hidpp: remove double assignment from __hidpp_send_report
  HID: logitech-hidpp: do not make failure to get the name fatal
  HID: logitech-hidpp: ignore very-short or empty names
  HID: logitech-hidpp: make .probe usbhid capable
  HID: logitech-hidpp: allow non HID++ devices to be handled by this module
  HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver
  HID: logitech-dj: make appending of the HID++ descriptors conditional
  ...

Pull i3c update from Boris Brezillon:

 - Fix a shift wrap bug in the core

 - Remove dead code in the DW driver

* tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: Fix a shift wrap bug in i3c_bus_set_addr_slot_status()
  i3c: master: dw: remove dead code from dw_i3c_master_*_xfers()

Pull security subsystem updates from James Morris:
 "Just a few bugfixes and documentation updates"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  seccomp: fix up grammar in comment
  Revert "security: inode: fix a missing check for securityfs_create_file"
  Yama: mark function as static
  security: inode: fix a missing check for securityfs_create_file
  keys: safe concurrent user->{session,uid}_keyring access
  security: don't use RCU accessors for cred->session_keyring
  Yama: mark local symbols as static
  LSM: lsm_hooks.h: fix documentation format
  LSM: fix documentation for the shm_* hooks
  LSM: fix documentation for the sem_* hooks
  LSM: fix documentation for the msg_queue_* hooks
  LSM: fix documentation for the audit_* hooks
  LSM: fix documentation for the path_chmod hook
  LSM: fix documentation for the socket_getpeersec_dgram hook
  LSM: fix documentation for the task_setscheduler hook
  LSM: fix documentation for the socket_post_create hook
  LSM: fix documentation for the syslog hook
  LSM: fix documentation for sb_copy_data hook

Pull spi updates from Mark Brown:
 "One small feature was added this release but the bulk of the diffstat
  and the changelog comes from the fact that several older drivers got
  some fairly hefty reworks and a couple of new drivers were added:

   - Support for detailed control of timing around chip selects from
     Sowjanya Komatineni.

   - A big set of fixes and imrovements for the Tegra114 driver from
     Sowjanya Komatineni.

   - A big simplification of the GPIO driver from Andrey Smirnov.

   - DMA support and fixes for the Freescale LPSPI driver from Clark
     Wang.

   - Fixes and optimizations for the bcm2835aux from Martin Sparl.

   - New drivers for Mediatek MT7621 (graduated from staging) and Zynq
     QSPI"

[ This is a so-called "evil merge" that additionally removes a warning
  due to an unused variable 'i' introduced by commit 1dfbf334 ("spi:
  ep93xx: Convert to use CS GPIO descriptors")     - Linus ]

* tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits)
  spi: rspi: Fix handling of QSPI code when transmit and receive
  spi: atmel-quadspi: fix crash while suspending
  spi: stm32: return the get_irq error
  spi: tegra114: fix PIO transfer
  spi: pxa2xx: fix SCR (divisor) calculation
  spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select
  spi: ep93xx: Convert to use CS GPIO descriptors
  spi: AD ASoC: declare missing of table
  spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl
  spi: stm32-qspi: manage the get_irq error case
  spi/spi-bcm2835: Split transfers that exceed DLEN
  spi: expand mode support
  dt-bindings: spi: spi-mt65xx: add support for MT8516
  spi: pxa2xx: Add support for Intel Comet Lake
  spi/trace: Cap buffer contents at 64 bytes
  spi: Release spi_res after finalizing message
  spi: Remove warning in spi_split_transfers_maxsize()
  spi: Remove one needless transfer speed fall back case
  spi: sh-msiof: Document r8a77470 bindings
  spi: pxa2xx: use a module softdep for dw_dmac
  ...

Pull regulator updates from Mark Brown:
 "In terms of big picture changes this has been an extremely quiet
  release however there's a lot of changes and a fairly big diffstat
  thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks
  to his work this release removes code overall even though we've added
  a new (albiet fairly small) driver.

  Notable things:

   - A fix for a long standing issue with locking on error interrupts
     from Steve Twiss.

   - A new driver for ST Microelectonics STM32 PWR"

* tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits)
  regulator: core: simplify return value on suported_voltage
  regulator: da9xxx: Switch to SPDX identifier
  regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
  regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
  regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators
  regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc
  regulator: pv880x0: Switch to SPDX identifier
  regulator: hi6xxx: Switch to SPDX identifier
  regulator: vexpress: Switch to SPDX identifier
  regulator: vexpress: Get rid of struct vexpress_regulator
  regulator: sky81452: Switch to SPDX identifier
  regulator: sky81452: Constify sky81452_reg_ops
  regulator: sy8106a: Get rid of struct sy8106a
  regulator: core: do not report EPROBE_DEFER as error but as debug
  regulator: mt63xx: Switch to SPDX identifier
  regulator: fan53555: Switch to SPDX identifier
  regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info
  regulator: ltc3589: Switch to SPDX identifier
  regulator: ltc3589: Get rid of struct ltc3589_regulator
  regulator: ltc3589: Convert to use simplified DT parsing
  ...

Pull regmap updates from Mark Brown:
 "A larger than usual set of changes, though mainly small:

   - An optimization to the debugfs code to greatly improve performance
     when dumping extremely sparse register maps from Lucas Tanure.

   - Stricter enforcement of writability checks from Han Nandor.

   - A fix for default interrupt mode configuration from Srinivas
     Kandagatla.

   - SPDX header conversion from Greg Kroah-Hartman"

* tag 'regmap-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add proper SPDX identifiers on files that did not have them.
  regmap: verify if register is writeable before writing operations
  regmap: regmap-irq: fix getting type default values
  regmap: debugfs: Jump to the next readable register
  regmap: debugfs: Replace code by already existing function

This is a sample program showing userspace how to get race-free access
to process metadata from a pidfd.  It is rather easy to do and userspace
can actually simply reuse code that currently parses a process's status
file in procfs.
The program can easily be extended into a generic helper suitable for
inclusion in a libc to make it even easier for userspace to gain metadata
access.

Since this came up in a discussion because this API is going to be used
in various service managers: A lot of programs will have a whitelist
seccomp filter that returns <some-errno> for all new syscalls.  This
means that programs might get confused if CLONE_PIDFD works but the
later pidfd_send_signal() syscall doesn't.  Hence, here's a ahead of
time check that pidfd_send_signal() is supported:

bool pidfd_send_signal_supported()
{
        int procfd = open("/proc/self", O_DIRECTORY | O_RDONLY | O_CLOEXEC);
        if (procfd < 0)
                return false;

        /*
         * A process is always allowed to signal itself so
         * pidfd_send_signal() should never fail this test. If it does
         * it must mean it is not available, blocked by an LSM, seccomp,
         * or other.
         */
        return pidfd_send_signal(procfd, 0, NULL, 0) == 0;
}
Signed-off-by: Christian Brauner <christian@brauner.io>
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>

Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD.  With this
patch pidfd_send_signal() becomes independent of procfs.  This fullfils
the request made when we merged the pidfd_send_signal() patchset.  The
pidfd_send_signal() syscall is now always available allowing for it to
be used by users without procfs mounted or even users without procfs
support compiled into the kernel.
Signed-off-by: Christian Brauner <christian@brauner.io>
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>

This patchset makes it possible to retrieve pid file descriptors at
process creation time by introducing the new flag CLONE_PIDFD to the
clone() system call.  Linus originally suggested to implement this as a
new flag to clone() instead of making it a separate system call.  As
spotted by Linus, there is exactly one bit for clone() left.

CLONE_PIDFD creates file descriptors based on the anonymous inode
implementation in the kernel that will also be used to implement the new
mount api.  They serve as a simple opaque handle on pids.  Logically,
this makes it possible to interpret a pidfd differently, narrowing or
widening the scope of various operations (e.g. signal sending).  Thus, a
pidfd cannot just refer to a tgid, but also a tid, or in theory - given
appropriate flag arguments in relevant syscalls - a process group or
session. A pidfd does not represent a privilege.  This does not imply it
cannot ever be that way but for now this is not the case.

A pidfd comes with additional information in fdinfo if the kernel supports
procfs.  The fdinfo file contains the pid of the process in the callers
pid namespace in the same format as the procfs status file, i.e. "Pid:\t%d".

As suggested by Oleg, with CLONE_PIDFD the pidfd is returned in the
parent_tidptr argument of clone.  This has the advantage that we can
give back the associated pid and the pidfd at the same time.

To remove worries about missing metadata access this patchset comes with
a sample program that illustrates how a combination of CLONE_PIDFD, and
pidfd_send_signal() can be used to gain race-free access to process
metadata through /proc/<pid>.  The sample program can easily be
translated into a helper that would be suitable for inclusion in libc so
that users don't have to worry about writing it themselves.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - fixes to seccomp test, and kselftest framework

 - cleanups to remove duplicate header defines

 - fixes to efivarfs "make clean" target

 - cgroup cleanup path

 - Moving the IMA kexec_load selftest to selftests/kexec work from Mimi
   Johar and Petr Vorel

 - A framework to kselftest for writing kernel test modules addition
   from Tobin C. Harding

* tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
  selftests: build and run gpio when output directory is the src dir
  selftests/ipc: Fix msgque compiler warnings
  selftests/efivarfs: clean up test files from test_create*()
  selftests: fix headers_install circular dependency
  selftests/kexec: update get_secureboot_mode
  selftests/kexec: make kexec_load test independent of IMA being enabled
  selftests/kexec: check kexec_load and kexec_file_load are enabled
  selftests/kexec: Add missing '=y' to config options
  selftests/kexec: kexec_file_load syscall test
  selftests/kexec: define "require_root_privileges"
  selftests/kexec: define common logging functions
  selftests/kexec: define a set of common functions
  selftests/kexec: cleanup the kexec selftest
  selftests/kexec: move the IMA kexec_load selftest to selftests/kexec
  selftests/harness: Add 30 second timeout per test
  selftests/seccomp: Handle namespace failures gracefully
  selftests: cgroup: fix cleanup path in test_memcg_subtree_control()
  selftests: efivarfs: remove the test_create_read file if it was exist
  rseq/selftests: Adapt number of threads to the number of detected cpus
  lib: Add test module for strscpy_pad
  ...

Pull crypto update from Herbert Xu:
 "API:
   - Add support for AEAD in simd
   - Add fuzz testing to testmgr
   - Add panic_on_fail module parameter to testmgr
   - Use per-CPU struct instead multiple variables in scompress
   - Change verify API for akcipher

  Algorithms:
   - Convert x86 AEAD algorithms over to simd
   - Forbid 2-key 3DES in FIPS mode
   - Add EC-RDSA (GOST 34.10) algorithm

  Drivers:
   - Set output IV with ctr-aes in crypto4xx
   - Set output IV in rockchip
   - Fix potential length overflow with hashing in sun4i-ss
   - Fix computation error with ctr in vmx
   - Add SM4 protected keys support in ccree
   - Remove long-broken mxc-scc driver
   - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
  crypto: ccree - use a proper le32 type for le32 val
  crypto: ccree - remove set but not used variable 'du_size'
  crypto: ccree - Make cc_sec_disable static
  crypto: ccree - fix spelling mistake "protedcted" -> "protected"
  crypto: caam/qi2 - generate hash keys in-place
  crypto: caam/qi2 - fix DMA mapping of stack memory
  crypto: caam/qi2 - fix zero-length buffer DMA mapping
  crypto: stm32/cryp - update to return iv_out
  crypto: stm32/cryp - remove request mutex protection
  crypto: stm32/cryp - add weak key check for DES
  crypto: atmel - remove set but not used variable 'alg_name'
  crypto: picoxcell - Use dev_get_drvdata()
  crypto: crypto4xx - get rid of redundant using_sd variable
  crypto: crypto4xx - use sync skcipher for fallback
  crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
  crypto: crypto4xx - fix ctr-aes missing output IV
  crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
  crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
  crypto: ccree - handle tee fips error during power management resume
  crypto: ccree - add function to handle cryptocell tee fips error
  ...

Pull hwmon updates from Guenter Roeck:

 - Add driver for Intersil ISL68137 PWM Controller

 - Add driver for Lochnagar 2

 - Add driver for Infineon IR38064 Voltage Regulator

 - Add support for TMP75B to lm75 driver

 - Convert documentation to ReST format

 - Use request_muxed_region for Super-IO accesses in several drivers

 - Add 'samples' attribute to ABI, and start using it

 - Add support for custom sysfs attributes to pmbus drivers (used in
   ISL68137 driver)

 - Introduce HWMON_CHANNEL_INFO macro

 - Automated changes:
      - Use permission specific [SENSOR_][DEVICE_]ATTR variants
      - Fix build warnings due to unused of_device_id structures
      - Use HWMON_CHANNEL_INFO macro

 - Various minor improvements and fixes

* tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (125 commits)
  hwmon: (lm75) Add support for TMP75B
  dt-bindings: hwmon: Add tmp75b to lm75.txt
  hwmon: (s3c) Use dev_get_drvdata()
  hwmon: (max6650) Drop call to thermal_cdev_update
  docs: hwmon: remove the extension from .rst files
  docs: hwmon: convert three docs to ReST format
  hwmon: (max6650) add thermal cooling device capability
  hwmon: (ina3221) Add voltage conversion time settings
  hwmon: (ina3221) Do not read-back to cache reg_config
  docs: hwmon: Add an index file and rename docs to *.rst
  docs: hwmon: convert remaining files to ReST format
  docs: hwmon: misc files: convert to ReST format
  docs: hwmon: pmbus files: convert to ReST format
  docs: hwmon: k8temp, w83793: convert to ReST format
  docs: hwmon: da9052, da9055: convert to ReST format
  docs: hwmon: wm831x, wm8350: convert to ReST format
  docs: hwmon: dme1737, vt1211: convert to ReST format
  docs: hwmon: ads1015: convert to ReST format
  docs: hwmon: asc7621: convert to ReST format
  docs: hwmon: ibmpowernv: convert to ReST format
  ...

Pull RAS updates from Borislav Petkov:

 - Support for varying MCA bank numbers per CPU: this is in preparation
   for future CPU enablement (Yazen Ghannam)

 - MCA banks read race fix (Tony Luck)

 - Facility to filter MCEs which should not be logged (Yazen Ghannam)

 - The usual round of cleanups and fixes

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE/AMD: Don't report L1 BTB MCA errors on some family 17h models
  x86/MCE: Add an MCE-record filtering function
  RAS/CEC: Increment cec_entered under the mutex lock
  x86/mce: Fix debugfs_simple_attr.cocci warnings
  x86/mce: Remove mce_report_event()
  x86/mce: Handle varying MCA bank counts
  x86/mce: Fix machine_check_poll() tests for error types
  MAINTAINERS: Fix file pattern for X86 MCE INFRASTRUCTURE
  x86/MCE: Group AMD function prototypes in <asm/mce.h>

Pull EDAC updates from Borislav Petkov:

 - amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam)

 - skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo)

 - altera: Stratix10 improvements (Thor Thayer)

 - The usual round of fixes, fixlets and cleanups

* tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  Revert "EDAC/amd64: Support more than two controllers for chip select handling"
  arm64: dts: stratix10: Use new Stratix10 EDAC bindings
  Documentation: dt: edac: Add Stratix10 Peripheral bindings
  Documentation: dt: edac: Fix Stratix10 IRQ bindings
  EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call
  EDAC/altera: Initialize peripheral FIFOs in probe()
  EDAC/altera: Do less intrusive error injection
  EDAC/amd64: Adjust printed chip select sizes when interleaved
  EDAC/amd64: Support more than two controllers for chip select handling
  EDAC/amd64: Recognize x16 symbol size
  EDAC/amd64: Set maximum channel layer size depending on family
  EDAC/amd64: Support more than two Unified Memory Controllers
  EDAC/amd64: Use a macro for iterating over Unified Memory Controllers
  EDAC/amd64: Add Family 17h Model 30h PCI IDs
  MAINTAINERS: Add entry for EDAC-I10NM
  MAINTAINERS: Update entry for EDAC-SKYLAKE
  EDAC, altera: Fix S10 Double Bit Error Notification
  EDAC, skx, i10nm: Make skx_common.c a pure library

Pull device properties framework updates from Rafael Wysocki:
 "These fix the handling of data nodes in the ACPI properties support
  code, add a new helper for endpoint lookup in property graphs and
  restore a comment inadvertently removed by one of previous changes.

  Specifics:

   - Fix the handling of data nodes in the ACPI properties support code
     for devices with child devices and hierarchical _DSD properties
     (Pierre-Louis Bossart).

   - Add fwnode_graph_get_endpoint_by_id() helper for endpoint lookup in
     device property graphs (Sakari Ailus).

   - Restore the _DSD data subnodes GUID comment inadvertently removed
     by one of previous changes (Shunyong Yang)"

* tag 'devprop-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
  device property: Add fwnode_graph_get_endpoint_by_id()
  ACPI: property: restore _DSD data subnodes GUID comment

Pull power management updates from Rafael Wysocki:
 "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
  handling and expose it to user space via sysfs, fix and clean up
  several cpufreq drivers, add support for two new chips to the qoriq
  cpufreq driver, fix, simplify and clean up the cpufreq core and the
  schedutil governor, add support for "CPU" domains to the generic power
  domains (genpd) framework and provide low-level PSCI firmware support
  for that feature, fix the exynos cpuidle driver and fix a couple of
  issues in the devfreq subsystem and clean it up.

  Specifics:

   - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
     processors and expose it to user space via sysfs to avoid having to
     access it through the generic MSR I/F (Rafael Wysocki).

   - Improve the handling of global turbo changes made by the platform
     firmware in the intel_pstate driver (Rafael Wysocki).

   - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
     in cpufreq (Borislav Petkov).

   - Fix the frequency calculation loop in the armada-37xx cpufreq
     driver (Gregory CLEMENT).

   - Fix possible object reference leaks in multuple cpufreq drivers
     (Wen Yang).

   - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).

   - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
     Kumar).

   - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
     (Vabhav Sharma, Yuantian Tang).

   - Fix kobject memory leak in the cpufreq core (Viresh Kumar).

   - Simplify the IOwait boosting in the schedutil cpufreq governor and
     rework the TSC cpufreq notifier on x86 (Rafael Wysocki).

   - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).

   - Improve the cpufreq documentation, add SPDX license tags to some PM
     documentation files and unify copyright notices in them (Rafael
     Wysocki).

   - Add support for "CPU" domains to the generic power domains (genpd)
     framework and provide low-level PSCI firmware support for that
     feature (Ulf Hansson).

   - Rearrange the PSCI firmware support code and add support for
     SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).

   - Improve genpd support for devices in multiple power domains (Ulf
     Hansson).

   - Unify target residency for the AFTR and coupled AFTR states in the
     exynos cpuidle driver (Marek Szyprowski).

   - Introduce new helper routine in the operating performance points
     (OPP) framework (Andrew-sh.Cheng).

   - Add support for passing on-die termination (ODT) and auto power
     down parameters from the kernel to Trusted Firmware-A (TF-A) to the
     rk3399_dmc devfreq driver (Enric Balletbo i Serra).

   - Add tracing to devfreq (Lukasz Luba).

   - Make the exynos-bus devfreq driver suspend all devices on system
     shutdown (Marek Szyprowski).

   - Fix a few minor issues in the devfreq subsystem and clean it up
     somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
     Saravana Kannan, Yangtao Li).

   - Improve system wakeup diagnostics (Stephen Boyd).

   - Rework filesystem sync messages emitted during system suspend and
     hibernation (Harry Pan)"

* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  x86: tsc: Rework time_cpufreq_notifier()
  PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
  PM / Domains: Search for the CPU device outside the genpd lock
  PM / Domains: Drop unused in-parameter to some genpd functions
  PM / Domains: Use the base device for driver_deferred_probe_check_state()
  cpufreq: qoriq: Add ls1028a chip support
  PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
  PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
  PM / Domains: Don't kfree() the virtual device in the error path
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  PM / Domains: remove unnecessary unlikely()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  firmware/psci: add support for SYSTEM_RESET2
  PM / devfreq: add tracing for scheduling work
  trace: events: add devfreq trace event file
  ...

Pull ACPI updates from Rafael Wysocki:
 "These rearrange the ACPI documentation by converting it to the .rst
  format and splitting it into clear categories (admin guide, driver
  API, firmware guide), switch over multiple users of a problematic
  library function to a new better one, update the ACPICA code in the
  kernel to a new upstream release, fix a few issues, improve power
  device management diagnostics and do some cleanups.

  Specifics:

   - Convert the ACPI documentation in the kernel source tree to the
     .rst format and split it into the admin guide, driver API and
     firmware guide parts (Changbin Du).

   - Add a PRP0001 usage example to the ACPI documentation (Thomas
     Preston).

   - Switch over the users of the acpi_dev_get_first_match_name()
     library function which turned out to be problematic to a new,
     better one called acpi_dev_get_first_match_dev() (Andy Shevchenko,
     YueHaibing).

   - Update the ACPICA code in the kernel to upstream release 20190405
     including:
       * Null pointer dereference check in acpi_ns_delete_node() (Erik
         Schmauss).
       * Multiple macro and function name changes (Bob Moore).
       * Predefined operation region name fix (Erik Schmauss).

   - Fix hibernation issue on systems using the Baytrail and Cherrytrail
     Intel SoCs introduced during the 4.20 development cycle (Hans de
     Goede).

   - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui).

   - Fix button handling during system resume (Zhang Rui).

   - Add a device PM diagnostic message (Rafael Wysocki).

   - Clean up the code, comments and white space in multiple places
     (Bjorn Helgaas, Gustavo Silva, Kefeng Wang)"

* tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST
  Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST
  Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST
  Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST
  ...

Pull arm64 updates from Will Deacon:
 "Mostly just incremental improvements here:

   - Introduce AT_HWCAP2 for advertising CPU features to userspace

   - Expose SVE2 availability to userspace

   - Support for "data cache clean to point of deep persistence" (DC PODP)

   - Honour "mitigations=off" on the cmdline and advertise status via
     sysfs

   - CPU timer erratum workaround (Neoverse-N1 #1188873)

   - Introduce perf PMU driver for the SMMUv3 performance counters

   - Add config option to disable the kuser helpers page for AArch32 tasks

   - Futex modifications to ensure liveness under contention

   - Rework debug exception handling to seperate kernel and user
     handlers

   - Non-critical fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  Documentation: Add ARM64 to kernel-parameters.rst
  arm64/speculation: Support 'mitigations=' cmdline option
  arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
  arm64: enable generic CPU vulnerabilites support
  arm64: add sysfs vulnerability show for speculative store bypass
  arm64: Fix size of __early_cpu_boot_status
  clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
  clocksource/arm_arch_timer: Remove use of workaround static key
  clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
  clocksource/arm_arch_timer: Direcly assign set_next_event workaround
  arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  ARM: vdso: Remove dependency with the arch_timer driver internals
  arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
  arm64: Add part number for Neoverse N1
  arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
  arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
  arm64: mm: Remove pte_unmap_nested()
  arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
  arm64: compat: Reduce address limit for 64K pages
  ...

Pull mmiowb removal from Will Deacon:
 "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())

  Remove mmiowb() from the kernel memory barrier API and instead, for
  architectures that need it, hide the barrier inside spin_unlock() when
  MMIO has been performed inside the critical section.

  The only relatively recent changes have been addressing review
  comments on the documentation, which is in a much better shape thanks
  to the efforts of Ben and Ingo.

  I was initially planning to split this into two pull requests so that
  you could run the coccinelle script yourself, however it's been plain
  sailing in linux-next so I've just included the whole lot here to keep
  things simple"

* tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits)
  docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section
  arch: Remove dummy mmiowb() definitions from arch code
  net/ethernet/silan/sc92031: Remove stale comment about mmiowb()
  i40iw: Redefine i40iw_mmiowb() to do nothing
  scsi/qla1280: Remove stale comment about mmiowb()
  drivers: Remove explicit invocations of mmiowb()
  drivers: Remove useless trailing comments from mmiowb() invocations
  Documentation: Kill all references to mmiowb()
  riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code
  powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code
  ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  m68k/io: Remove useless definition of mmiowb()
  nds32/io: Remove useless definition of mmiowb()
  x86/io: Remove useless definition of mmiowb()
  arm64/io: Remove useless definition of mmiowb()
  ARM/io: Remove useless definition of mmiowb()
  mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors
  ...

Pull s390 updates from Martin Schwidefsky:

 - Support for kernel address space layout randomization

 - Add support for kernel image signature verification

 - Convert s390 to the generic get_user_pages_fast code

 - Convert s390 to the stack unwind API analog to x86

 - Add support for CPU directed interrupts for PCI devices

 - Provide support for MIO instructions to the PCI base layer, this will
   allow the use of direct PCI mappings in user space code

 - Add the basic KVM guest ultravisor interface for protected VMs

 - Add AT_HWCAP bits for several new hardware capabilities

 - Update the CPU measurement facility counter definitions to SVN 6

 - Arnds cleanup patches for his quest to get LLVM compiles working

 - A vfio-ccw update with bug fixes and support for halt and clear

 - Improvements for the hardware TRNG code

 - Another round of cleanup for the QDIO layer

 - Numerous cleanups and bug fixes

* tag 's390-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (98 commits)
  s390/vdso: drop unnecessary cc-ldoption
  s390: fix clang -Wpointer-sign warnigns in boot code
  s390: drop CONFIG_VIRT_TO_BUS
  s390: boot, purgatory: pass $(CLANG_FLAGS) where needed
  s390: only build for new CPUs with clang
  s390: simplify disabled_wait
  s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  s390/unwind: introduce stack unwind API
  s390/opcodes: add missing instructions to the disassembler
  s390/bug: add entry size to the __bug_table section
  s390: use proper expoline sections for .dma code
  s390/nospec: rename assembler generated expoline thunks
  s390: add missing ENDPROC statements to assembler functions
  locking/lockdep: check for freed initmem in static_obj()
  s390/kernel: add support for kernel address space layout randomization (KASLR)
  s390/kernel: introduce .dma sections
  s390/sclp: do not use static sccbs
  s390/kprobes: use static buffer for insn_page
  s390/kernel: convert SYSCALL and PGM_CHECK handlers to .quad
  s390/kernel: build a relocatable kernel
  ...