- 25 Jan, 2022 8 commits
-
-
Steffen Maier authored
Suppose we have an environment with a number of non-NPIV FCP devices (virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical FCP channel (HBA port) and its I_T nexus. Plus a number of storage target ports zoned to such shared channel. Now one target port logs out of the fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port recovery depending on the ADISC result. This happens on all such FCP devices (in different Linux images) concurrently as they all receive a copy of this RSCN. In the following we look at one of those FCP devices. Requests other than FSF_QTCB_FCP_CMND can be slow until they get a response. Depending on which requests are affected by slow responses, there are different recovery outcomes. Here we want to fix failed recoveries on port or adapter level by avoiding recovery requests that can be slow. We need the cached N_Port_ID for the remote port "link" test with ADISC. Just before sending the ADISC, we now intentionally forget the old cached N_Port_ID. The idea is that on receiving an RSCN for a port, we have to assume that any cached information about this port is stale. This forces a fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for the same port. Since we typically can still communicate with the nameserver efficiently, we now reach steady state quicker: Either the nameserver still does not know about the port so we stop recovery, or the nameserver already knows the port potentially with a new N_Port_ID and we can successfully and quickly perform open port recovery. For the one case, where ADISC returns successfully, we re-initialize port->d_id because that case does not involve any port recovery. This also solves a problem if the storage WWPN quickly logs into the fabric again but with a different N_Port_ID. Such as on virtual WWPN takeover during target NPIV failover. [https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the RSCN from the storage FDISC was ignored by zfcp and we could not successfully recover the failover. On some later failback on the storage, we could have been lucky if the virtual WWPN got the same old N_Port_ID from the SAN switch as we still had cached. Then the related RSCN triggered a successful port reopen recovery. However, there is no guarantee to get the same N_Port_ID on NPIV FDISC. Even though NPIV-enabled FCP devices are not affected by this problem, this code change optimizes recovery time for gone remote ports as a side effect. The timely drop of cached N_Port_IDs prevents unnecessary slow open port attempts. While the problem might have been in code before v2.6.32 commit 799b76d0 ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix depends on the gid_pn_work introduced with that commit, so we mark it as culprit to satisfy fix dependencies. Note: Point-to-point remote port is already handled separately and gets its N_Port_ID from the cached peer_d_id. So resetting port->d_id in general does not affect PtP. Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com Fixes: 799b76d0 ("[SCSI] zfcp: Decouple gid_pn requests from erp") Cc: <stable@vger.kernel.org> #2.6.32+ Suggested-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
According to the comment in check_fw_ready() we should not check the IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers. However we check this very field in process_oq() for processing the highest index interrupt vector. The highest interrupt vector is checked as the FW is programmed to signal fatal errors through this irq. Change that function to not check IOP1_READY for those mentioned controllers, but do check ILA_READY in both cases. The reason I assume that this was not hit earlier was because we always allocated 64 MSI(X), and just did not pass the vector index check in process_oq(), i.e. the handler never ran for vector index 63. Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.comTested-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Saurav Kashyap authored
If FCoE is not configured, libfc/libfcoe keeps on retrying FLOGI and after 3 retries driver does a context reset and tries fipvlan again. This leads to context reset message flooding the logs. Hence ratelimit the message to prevent flooding the logs. Link: https://lore.kernel.org/r/20220117135311.6256-4-njavali@marvell.comSigned-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
Hung task call trace was seen during LOGO processing. [ 974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued... [ 974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0 [ 974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET [ 974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1. [ 974.309625] host1: rport 016900: Received LOGO request while in state Ready [ 974.309627] host1: rport 016900: Delete port [ 974.309642] host1: rport 016900: work event 3 [ 974.309644] host1: rport 016900: lld callback ev 3 [ 974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush. [ 974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success... [ 984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds. [ 984.031136] Not tainted 4.18.0-305.el8.x86_64 #1 [ 984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 984.031209] jbd2/dm-15-8 D 0 7645 2 0x80004080 [ 984.031212] Call Trace: [ 984.031222] __schedule+0x2c4/0x700 [ 984.031230] ? unfreeze_partials.isra.83+0x16e/0x1a0 [ 984.031233] ? bit_wait_timeout+0x90/0x90 [ 984.031235] schedule+0x38/0xa0 [ 984.031238] io_schedule+0x12/0x40 [ 984.031240] bit_wait_io+0xd/0x50 [ 984.031243] __wait_on_bit+0x6c/0x80 [ 984.031248] ? free_buffer_head+0x21/0x50 [ 984.031251] out_of_line_wait_on_bit+0x91/0xb0 [ 984.031257] ? init_wait_var_entry+0x50/0x50 [ 984.031268] jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2] [ 984.031280] kjournald2+0xbd/0x270 [jbd2] [ 984.031284] ? finish_wait+0x80/0x80 [ 984.031291] ? commit_timeout+0x10/0x10 [jbd2] [ 984.031294] kthread+0x116/0x130 [ 984.031300] ? kthread_flush_work_fn+0x10/0x10 [ 984.031305] ret_from_fork+0x1f/0x40 There was a ref count issue when LOGO is received during TMF. This leads to one of the I/Os hanging with the driver. Fix the ref count. Link: https://lore.kernel.org/r/20220117135311.6256-3-njavali@marvell.comSigned-off-by:
-
Saurav Kashyap authored
Call trace seen when creating NPIV ports, only 32 out of 64 show online. stag work was not initialized for vport, hence initialize the stag work. WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80 CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE --------- -- 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021 Workqueue: events fc_lport_timeout [libfc] RIP: 0010:__queue_delayed_work+0x68/0x80 Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81 f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23 RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006 RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002 RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788 RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750 R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58 R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18 FS: 0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: queue_delayed_work_on+0x36/0x40 qedf_elsct_send+0x57/0x60 [qedf] fc_lport_enter_flogi+0x90/0xc0 [libfc] fc_lport_timeout+0xb7/0x140 [libfc] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 008f00f722f2c2ff ]-- Initialize stag work for all the vports. Link: https://lore.kernel.org/r/20220117135311.6256-2-njavali@marvell.comSigned-off-by:
-
Xiaoke Wang authored
devm_kstrdup() returns pointer to allocated string on success, NULL on failure. So it is better to check the return value of it. Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Signed-off-by:
-
ZouMingzhe authored
iscsit_tpg_check_network_portal() has nested for_each loops and is supposed to return true when a match is found. However, the tpg loop will still continue after existing the tpg_np loop. If this tpg_np is not the last the match value will be changed. Break the outer loop after finding a match and make sure the np under each tpg is unique. Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cnSigned-off-by:
ZouMingzhe <mingzhe.zou@easystack.cn> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Yang Yingliang authored
GFP_KERNEL/GFP_DMA can't be used under a spin lock. According the comment, els_ios_lock is used to protect els ios list so we can move down the spin lock to avoid using this flag under the lock. Link: https://lore.kernel.org/r/20220111012441.3232527-1-yangyingliang@huawei.com Fixes: 8f406ef7 ("scsi: elx: libefc: Extended link Service I/O handling") Reported-by:
Hulk Robot <hulkci@huawei.com> Reviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
- 23 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 26 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
Masahiro Yamada authored
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by:
-
Masahiro Yamada authored
This reverts commit cd8c917a. Commit 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf") provided the final solution. Now reverting the temporary workaround. Signed-off-by:
-
Dmitry V. Levin authored
As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: - multichannel fixes, addressing additional reconnect and DFS scenarios - reenabling fscache support (indexing rewrite, metadata caching e.g.) - send additional version information during NTLMSSP negotiate to improve debugging - fix for a mount race - DFS fixes - fix for a memory leak for stable * tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number smb3: send NTLMSSP version information cifs: Support fscache indexing rewrite cifs: cifs_ses_mark_for_reconnect should also update reconnect bits cifs: update tcpStatus during negotiate and sess setup cifs: make status checks in version independent callers cifs: remove repeated state change in dfs tree connect cifs: fix the cifs_reconnect path for DFS cifs: remove unused variable ses_selected cifs: protect all accesses to chan_* with chan_lock cifs: fix the connection state transitions with multichannel cifs: check reconnects for channels of active tcons too smb3: add new defines from protocol specification cifs: serialize all mount attempts cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty cifs: clean up an inconsistent indenting cifs: free ntlmsspblob allocated in negotiate
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "One of the patches removes some dead code from xfs_ioctl32.h and the other fixes broken workqueue flushing in the inode garbage collector. - Minor cleanup of ioctl32 cruft - Clean up open coded inodegc workqueue function calls" * tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: flush inodegc workqueue tasks before cancel xfs: remove unused xfs_ioctl32.h declarations
-
Linus Torvalds authored
Merge tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull more fscache updates from David Howells: "A set of fixes and minor updates for the fscache rewrite: - Fix mishandling of volume collisions (the wait condition is inverted and so it was only waiting if the volume collision was already resolved). - Fix miscalculation of whether there's space available in cachefiles. - Make sure a default cache name is set on a cache if the user hasn't set one by the time they bind the cache. - Adjust the way the backing inode is presented in tracepoints, add a tracepoint for mkdir and trace directory lookup. - Add a tracepoint for failure to set the active file mark. - Add an explanation of the checks made on the backing filesystem. - Check that the backing filesystem supports tmpfile. - Document how the page-release cancellation of the read-skip optimisation works. And I've included a change for netfslib: - Make ops->init_rreq() optional" * tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: netfs: Make ops->init_rreq() optional fscache: Add a comment explaining how page-release optimisation works cachefiles: Check that the backing filesystem supports tmpfiles cachefiles: Explain checks in a comment cachefiles: Trace active-mark failure cachefiles: Make some tracepoint adjustments cachefiles: set default tag name if it's unspecified cachefiles: Calculate the blockshift in terms of bytes, not pages fscache: Fix the volume collision wait condition
-
git://git.infradead.org/users/willy/pagecacheLinus Torvalds authored
Pull more folio updates from Matthew Wilcox: "Three small folio patches. One bug fix, one patch pulled forward from the patches destined for 5.18 and then a patch to make use of that functionality" * tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache: filemap: Use folio_put_refs() in filemap_free_folio() mm: Add folio_put_refs() pagevec: Initialise folio_batch->percpu_pvec_drained
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: nsp_cs: Check of ioremap return value scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl() scsi: ufs: Modify Tactive time setting conditions scsi: efct: Remove useless DMA-32 fallback configuration scsi: message: fusion: mptctl: Use dma_alloc_coherent() scsi: message: fusion: mptsas: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info() scsi: message: fusion: mptbase: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory() scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API scsi: megaraid: Avoid mismatched storage type sizes scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy() scsi: aic79xx: Remove redundant error variable scsi: pm80xx: Port reset timeout error handling correction scsi: mpi3mr: Fix formatting problems in some kernel-doc comments scsi: mpi3mr: Fix some spelling mistakes scsi: mpt3sas: Update persistent trigger pages from sysfs interface scsi: core: Fix scsi_mode_select() interface scsi: aacraid: Fix spelling of "its" scsi: qedf: Fix potential dereference of NULL pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA fix from Damien Le Moal: "A single patch to fix a compilation error in the pata_octeon_cf driver (mips architecture), from me" * tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more thermal control updates from Rafael Wysocki: "Add device IDs for Raptor Lake to the int340x thermal control driver (Srinivas Pandruvada)" * tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Add Raptor Lake PCI device id thermal: int340x: Support Raptor Lake
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull extra ACPI updates from Rafael Wysocki: "These fix and clean up the ACPI CPPC driver on top of the recent changes in it merged previously and add some new device IDs to the ACPI DPTF driver. Specifics: - Fix a recently introduced endianness-related issue in the ACPI CPPC library and clean it up on top of that (Rafael Wysocki) - Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver (Srinivas Pandruvada)" * tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Support Raptor Lake ACPI: CPPC: Drop redundant local variable from cpc_read() ACPI: CPPC: Fix up I/O port access in cpc_read() -
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes and cleanups from Rob Herring: - Fix a regression when probing a child device reusing the parent device's DT node pointer - Refactor of_parse_phandle*() variants to static inlines - Drop Enric Balletbo i Serra as a maintainer - Fix DT schemas with arrays incorrectly encoded as a matrix - Drop unneeded pinctrl properties from schemas - Add SPI peripheral schema to SPI based displays - Clean-up several schema examples - Clean-up trivial-devices.yaml comments - Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei, F(x)tec, 8devices * tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers of: Check 'of_node_reused' flag on of_match_device() of: property: define of_property_read_u{8,16,32,64}_array() unconditionally of: base: make small of_parse_phandle() variants static inline dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example dt-bindings: Fix array schemas encoded as matrices dt-bindings: Drop unnecessary pinctrl properties dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry dt-bindings: mmc: arm,pl18x: Make each example a separate entry dt-bindings: display: Add SPI peripheral schema to SPI based displays scripts/dtc: dtx_diff: remove broken example from help text dt-bindings: trivial-devices: fix double spaces in comments dt-bindings: trivial-devices: fix swapped comments dt-bindings: vendor-prefixes: add Wingtech dt-bindings: vendor-prefixes: add Thundercomm dt-bindings: vendor-prefixes: add Huawei dt-bindings: vendor-prefixes: add F(x)tec dt-bindings: vendor-prefixes: add 8devices dt-bindings: power: reset: gpio-restart: Correct default priority
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm updates from Paolo Bonzini: "Generic: - selftest compilation fix for non-x86 - KVM: avoid warning on s390 in mark_page_dirty x86: - fix page write-protection bug and improve comments - use binary search to lookup the PMU event filter, add test - enable_pmu module parameter support for Intel CPUs - switch blocked_vcpu_on_cpu_lock to raw spinlock - cleanups of blocked vCPU logic - partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression) - various small fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits) docs: kvm: fix WARNINGs from api.rst selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c kvm: selftests: Do not indent with spaces kvm: selftests: sync uapi/linux/kvm.h with Linux header selftests: kvm: add amx_test to .gitignore KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops KVM: SVM: Drop AVIC's intermediate avic_set_running() helper KVM: VMX: Don't do full kick when handling posted interrupt wakeup KVM: VMX: Fold fallback path into triggering posted IRQ helper KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ KVM: VMX: Don't do full kick when triggering posted interrupt "fails" KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers ... -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc architecture updates from Helge Deller: "Fixes and enhancements: - a memory leak fix in an error path in pdc_stable (Miaoqian Lin) - two compiler warning fixes in the TOC code - added autodetection for currently used console type (serial or graphics) which inserts console=<type> if it's missing" * tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries parisc: Fix missing prototype for 'toc_intr' warning in toc.c parisc: Autodetect default output device and set console= kernel parameter parisc: Use safer strscpy() in setup_cmdline() parisc: Add visible flag to toc_stack variable -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Palmer Dabbelt: - Support for sv48 paging - Hart ID mappings are now sparse, which enables more CPUs to come up on systems with sparse hart IDs - A handful of cleanups and fixes * tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits) RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT RISC-V: Remove redundant err variable riscv: dts: sifive unmatched: Add gpio poweroff riscv: canaan: remove useless select of non-existing config SYSCON RISC-V: Do not use cpumask data structure for hartid bitmap RISC-V: Move spinwait booting method to its own config RISC-V: Move the entire hart selection via lottery to SMP RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method RISC-V: Do not print the SBI version during HSM extension boot print RISC-V: Avoid using per cpu array for ordered booting riscv: default to CONFIG_RISCV_SBI_V01=n riscv: fix boolconv.cocci warnings riscv: Explicit comment about user virtual address space size riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo riscv: Implement sv48 support asm-generic: Prepare for riscv use of pud_alloc_one and pud_free riscv: Allow to dynamically define VA_BITS riscv: Introduce functions to switch pt_ops riscv: Split early kasan mapping to prepare sv48 introduction riscv: Move KASAN mapping next to the kernel mapping ...
-
