- 16 Jun, 2023 2 commits
-
-
Alex Williamson authored
It should be possible to select vfio-pci variant drivers without building vfio-pci itself, which implies each variant driver should select vfio-pci-core. Fix the top level vfio Makefile to traverse pci based on vfio-pci-core rather than vfio-pci. Mark MMAP and INTX options depending on vfio-pci-core to cleanup resulting config if core is not enabled. Push all PCI related vfio options to a sub-menu and make descriptions consistent. Reviewed-by:
Cédric Le Goater <clg@redhat.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Reviewed-by:
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20230614193948.477036-2-alex.williamson@redhat.comSigned-off-by:
Alex Williamson <alex.williamson@redhat.com>
-
Alex Williamson authored
Test and enable PCIe AtomicOp completer support of various widths and report via device-info capability to userspace. Reviewed-by:
Robin Voetter <robin@streamhpc.com> Tested-by:
-
- 26 May, 2023 1 commit
-
-
Alex Williamson authored
Apply the same logic as commit 912b625b ("vfio/pci: demote hiding ecap messages to debug level") for the less common case of hiding standard capabilities. Reviewed-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reviewed-by:
-
- 23 May, 2023 12 commits
-
-
Reinette Chatre authored
Dynamic MSI-X is supported. Clear VFIO_IRQ_INFO_NORESIZE to provide guidance to user space. Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/fd1ef2bf6ae972da8e2805bc95d5155af5a8fb0a.1683740667.git.reinette.chatre@intel.comSigned-off-by:
-
Reinette Chatre authored
pci_msix_alloc_irq_at() enables an individual MSI-X interrupt to be allocated after MSI-X enabling. Use dynamic MSI-X (if supported by the device) to allocate an interrupt after MSI-X is enabled. An MSI-X interrupt is dynamically allocated at the time a valid eventfd is assigned. This is different behavior from a range provided during MSI-X enabling where interrupts are allocated for the entire range whether a valid eventfd is provided for each interrupt or not. The PCI-MSIX API requires that some number of irqs are allocated for an initial set of vectors when enabling MSI-X on the device. When dynamic MSIX allocation is not supported, the vector table, and thus the allocated irq set can only be resized by disabling and re-enabling MSI-X with a different range. In that case the irq allocation is essentially a cache for configuring vectors within the previously allocated vector range. When dynamic MSI-X allocation is supported, the API still requires some initial set of irqs to be allocated, but also supports allocating and freeing specific irq vectors both within and beyond the initially allocated range. For consistency between modes, as well as to reduce latency and improve reliability of allocations, and also simplicity, this implementation only releases irqs via pci_free_irq_vectors() when either the interrupt mode changes or the device is released. Signed-off-by:
-
Reinette Chatre authored
Not all MSI-X devices support dynamic MSI-X allocation. Whether a device supports dynamic MSI-X should be queried using pci_msix_can_alloc_dyn(). Instead of scattering code with pci_msix_can_alloc_dyn(), probe this ability once and store it as a property of the virtual device. Suggested-by:
-
Reinette Chatre authored
struct vfio_pci_core_device contains eleven boolean flags. Boolean flags clearly indicate their usage but space usage starts to be a concern when there are many. An upcoming change adds another boolean flag to struct vfio_pci_core_device, thereby increasing the concern that the boolean flags are consuming unnecessary space. Transition the boolean flags to use bitfields. On a system that uses one byte per boolean this reduces the space consumed by existing flags from 11 bytes to 2 bytes with room for a few more flags without increasing the structure's size. Suggested-by:
-
Reinette Chatre authored
In preparation for surrounding code change it is helpful to ensure that existing comments are accurate. Remove inaccurate comment about direct access and update the rest of the comment to reflect the purpose of writing the cached MSI message to the device. Suggested-by:
-
Reinette Chatre authored
struct vfio_pci_core_device::num_ctx counts how many interrupt contexts have been allocated. When all interrupt contexts are allocated simultaneously num_ctx provides the upper bound of all vectors that can be used as indices into the interrupt context array. With the upcoming support for dynamic MSI-X the number of interrupt contexts does not necessarily span the range of allocated interrupts. Consequently, num_ctx is no longer a trusted upper bound for valid indices. Stop using num_ctx to determine if a provided vector is valid. Use the existence of allocated interrupt. This changes behavior on the error path when user space provides an invalid vector range. Behavior changes from early exit without any modifications to possible modifications to valid vectors within the invalid range. This is acceptable considering that an invalid range is not a valid scenario, see link to discussion. The checks that ensure that user space provides a range of vectors that is valid for the device are untouched. Signed-off-by:
-
Reinette Chatre authored
Interrupt context is statically allocated at the time interrupts are allocated. Following allocation, the context is managed by directly accessing the elements of the array using the vector as index. The storage is released when interrupts are disabled. It is possible to dynamically allocate a single MSI-X interrupt after MSI-X is enabled. A dynamic storage for interrupt context is needed to support this. Replace the interrupt context array with an xarray (similar to what the core uses as store for MSI descriptors) that can support the dynamic expansion while maintaining the custom that uses the vector as index. With a dynamic storage it is no longer required to pre-allocate interrupt contexts at the time the interrupts are allocated. MSI and MSI-X interrupt contexts are only used when interrupts are enabled. Their allocation can thus be delayed until interrupt enabling. Only enabled interrupts will have associated interrupt contexts. Whether an interrupt has been allocated (a Linux irq number exists for it) becomes the criteria for whether an interrupt can be enabled. Signed-off-by:
-
Reinette Chatre authored
Enabling and disabling of an interrupt involves several steps that can fail. Cleanup after failure is done when the error is encountered, resulting in some repetitive code. Support for dynamic contexts will introduce more steps during interrupt enabling and disabling. Transition to centralized exit path in preparation for dynamic contexts to eliminate duplicate error handling code. Signed-off-by:
-
Reinette Chatre authored
Interrupt context storage is statically allocated at the time interrupts are allocated. Following allocation, the interrupt context is managed by directly accessing the elements of the array using the vector as index. It is possible to allocate additional MSI-X vectors after MSI-X has been enabled. Dynamic storage of interrupt context is needed to support adding new MSI-X vectors after initial allocation. Replace direct access of array elements with pointers to the array elements. Doing so reduces impact of moving to a new data structure. Move interactions with the array to helpers to mostly contain changes needed to transition to a dynamic data structure. No functional change intended. Signed-off-by:
-
Reinette Chatre authored
User space provides the vector as an unsigned int that is checked early for validity (vfio_set_irqs_validate_and_prepare()). A later negative check of the provided vector is not necessary. Remove the negative check and ensure the type used for the vector is consistent as an unsigned int. Signed-off-by:
-
Reinette Chatre authored
vfio_msi_disable() releases all previously allocated state associated with each interrupt before disabling MSI/MSI-X. vfio_msi_disable() iterates twice over the interrupt state: first directly with a for loop to do virqfd cleanup, followed by another for loop within vfio_msi_set_block() that removes the interrupt handler and its associated state using vfio_msi_set_vector_signal(). Simplify interrupt cleanup by iterating over allocated interrupts once. Signed-off-by:
-
Oleksandr Natalenko authored
Seeing a burst of messages like this: vfio-pci 0000:98:00.0: vfio_ecap_init: hiding ecap 0x19@0x1d0 vfio-pci 0000:98:00.0: vfio_ecap_init: hiding ecap 0x25@0x200 vfio-pci 0000:98:00.0: vfio_ecap_init: hiding ecap 0x26@0x210 vfio-pci 0000:98:00.0: vfio_ecap_init: hiding ecap 0x27@0x250 vfio-pci 0000:98:00.1: vfio_ecap_init: hiding ecap 0x25@0x200 vfio-pci 0000:b1:00.0: vfio_ecap_init: hiding ecap 0x19@0x1d0 vfio-pci 0000:b1:00.0: vfio_ecap_init: hiding ecap 0x25@0x200 vfio-pci 0000:b1:00.0: vfio_ecap_init: hiding ecap 0x26@0x210 vfio-pci 0000:b1:00.0: vfio_ecap_init: hiding ecap 0x27@0x250 vfio-pci 0000:b1:00.1: vfio_ecap_init: hiding ecap 0x25@0x200 is of little to no value for an ordinary user. Hence, use pci_dbg() instead of pci_info(). Signed-off-by:YangHang Liu <yanghliu@redhat.com> Link: https://lore.kernel.org/r/20230504131654.24922-1-oleksandr@natalenko.nameSigned-off-by:
-
- 21 May, 2023 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linuxLinus Torvalds authored
Pull UML fix from Richard Weinberger: - Fix modular build for UML watchdog * tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: harddog: fix modular build
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Plug a race in the stage-2 mapping code where the IPA and the PA would end up being out of sync - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) - FP/SVE/SME documentation update, in the hope that this field becomes clearer... - Add workaround for Apple SEIS brokenness to a new SoC - Random comment fixes x86: - add MSR_IA32_TSX_CTRL into msrs_to_save - fixes for XCR0 handling in SGX enclaves Generic: - Fix vcpu_array[0] races - Fix race between starting a VM and 'reboot -f'" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM) KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE KVM: Fix vcpu_array[0] races KVM: VMX: Fix header file dependency of asm/vmx.h KVM: Don't enable hardware after a restart/shutdown is initiated KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations KVM: arm64: Clarify host SME state management KVM: arm64: Restructure check for SVE support in FP trap handler KVM: arm64: Document check for TIF_FOREIGN_FPSTATE KVM: arm64: Fix repeated words in comments KVM: arm64: Constify start/end/phys fields of the pgtable walker data KVM: arm64: Infer PA offset from VA in hyp map walker KVM: arm64: Infer the PA offset from IPA in stage-2 map walker KVM: arm64: Use the bitmap API to allocate bitmaps KVM: arm64: Slightly optimize flush_context() -
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't available - Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf 'runqueue' type verification. This feature is built only with BUILD_BPF_SKEL=1 - Make vmlinux.h use bpf.h and perf_event.h in source directory, not system ones that may be old and not have things like 'union perf_sample_weight' - Add system include paths to BPF builds to pick things missing in the headers included by clang -target bpf - Update various header copies with the kernel sources - Change divide by zero and not supported events behavior to show 'nan'/'not counted' in 'perf stat' output. This happens when using things like 'perf stat -M TopdownL2 true', involving JSON metrics - Update no event/metric expectations affected by using JSON metrics in 'perf stat -ddd' perf test - Avoid segv with 'perf stat --topdown' for metrics without a group - Do not assume which events may have a PMU name, allowing the logic to keep an AUX event group together. Makes this usecase work again: $ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.078 MB perf.data ] $ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown] sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown] sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown] - Add a check for the above use case in 'perf test test_intel_pt' - Fix build with refcount checking on arm64, it was still accessing fields that need to be wrapped so that the refcounted struct gets checked - Fix contextid validation in ARM's CS-ETM, so that older kernels without that field can still be supported - Skip unsupported aggregation for stat events found in perf.data files in 'perf script' - Add stat test for record and script to check the previous problem - Remove needless debuginfod queries from 'perf test java symbol', this was just making the test take a long time to complete - Address python SafeConfigParser() deprecation warning in 'perf test attr' - Fix __NR_execve undeclared on i386 'perf bench syscall' build error * tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits) perf bench syscall: Fix __NR_execve undeclared build error perf test attr: Fix python SafeConfigParser() deprecation warning perf test attr: Update no event/metric expectations tools headers disabled-features: Sync with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' tools headers x86 cpufeatures: Sync with the kernel sources tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall tools headers UAPI: Sync linux/prctl.h with the kernel sources perf metrics: Avoid segv with --topdown for metrics without a group perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification perf cs-etm: Fix contextid validation perf arm64: Fix build with refcount checking perf test: Add stat test for record and script perf script: Skip aggregation for stat events perf build: Add system include paths to BPF builds perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory perf parse-events: Do not break up AUX event group perf test test_intel_pt.sh: Test sample mode with event with PMU name perf evsel: Modify group pmu name for software events ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix broken soft dirty tracking when using the Radix MMU (>= P9) - Fix ISA mapping when "ranges" property is not present, for PASemi Nemo boards - Fix a possible WARN_ON_ONCE hitting in BPF extable handling - Fix incorrect DMA address handling when using 2MB TCEs - Fix a bug in IOMMU table handling for SR-IOV devices - Fix the recent rework of IOMMU handling which left arch code calling clean up routines that are handled by the IOMMU core - A few assorted build fixes Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini, Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali Rohár, Randy Dunlap, and Rob Herring. * tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs powerpc/iommu: Remove iommu_del_device() powerpc/crypto: Fix aes-gcm-p10 build when VSX=n powerpc/bpf: populate extable entries only during the last pass powerpc/boot: Disable power10 features after BOOTAFLAGS assignment powerpc/64s/radix: Fix soft dirty tracking powerpc/fsl_uli1575: fix kconfig warnings and build errors powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Fix DT binding for the ahci-ceva driver to fully describe all iommus, from Michal * tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "A few small unspectacular fbdev fixes: - Fix for USB endpoint check in udlfb (found by syzbot fuzzer) - Small fix in error code path in omapfb - compiler warning fixes in fbmem & i810 - code removal and whitespace cleanups in stifb and atyfb" * tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Whitespace cleanups fbdev: udlfb: Use usb_control_msg_send() fbdev: udlfb: Fix endpoint check fbdev: atyfb: Remove unused clock determination fbdev: i810: include i810_main.h in i810_dvt.c fbdev: fbmem: mark get_fb_unmapped_area() static fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd server fixes from Steve French: - two fixes for incorrect SMB3 message validation (one for client which uses 8 byte padding, and one for empty bcc) - two fixes for out of bounds bugs: one for username offset checks (in session setup) and the other for create context name length checks in open requests * tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: smb2: Allow messages padded to 8byte boundary ksmbd: allocate one more byte for implied bcc[0] ksmbd: fix wrong UserName check in session_user ksmbd: fix global-out-of-bounds in smb2_find_context_vals
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: "Two smb3 client fixes, both related to deferred close, and also for stable: - send close for deferred handles before not after lease break response to avoid possible sharing violations - check all opens on an inode (looking for deferred handles) when lease break is returned not just the handle the lease break came in on" * tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: SMB3: drop reference to cfile before sending oplock break SMB3: Close all deferred handles of inode in case of handle lease break -
Mingwei Zhang authored
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to save/restore the register value during migration. Missing this may cause userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the value to the target VM. In addition, there is no need to add MSR_IA32_TSX_CTRL when ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So add the checking in kvm_probe_msr_to_save(). Fixes: c11f83e0 ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality") Reported-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Mingwei Zhang <mizhang@google.com> Reviewed-by:
Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's allowed XCR0 when emulating ECREATE. Note, this could theoretically break a setup where userspace advertises a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID XFRM subleaf based on the guest's XCR0. Reviewed-by:
Kai Huang <kai.huang@intel.com> Tested-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20230503160838.3412617-3-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Explicitly check the vCPU's supported XCR0 when determining whether or not the XFRM for ECREATE is valid. Checking CPUID works because KVM updates guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed XCR0, but that is rather subtle and KVM should not modify guest CPUID except for modeling true runtime behavior (allowed XFRM is most definitely not "runtime" behavior). Reviewed-by:
-
- 20 May, 2023 13 commits
-
-
Helge Deller authored
Missed whitespace cleanups in stifb. Fixes: 80004257 ("fbdev: stifb: Remove trailing whitespaces") Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
Use the newly introduced usb_control_msg_send() instead of usb_control_msg() when selecting the channel. Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.4-rc3 to resolve some reported problems, and add some new device ids. These include: - termios documentation updates - vc_screen use-after-free fix - memory leak fix in arc_uart driver - new 8250 driver ids - other small serial driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF serial: qcom-geni: fix enabling deactivated interrupt serial: 8250_bcm7271: fix leak in `brcmuart_probe` serial: 8250_bcm7271: balance clk_enable calls serial: arc_uart: fix of_iomap leak in `arc_serial_probe` serial: 8250: Document termios parameter of serial8250_em485_config() serial: Add support for Advantech PCI-1611U card serial: 8250_exar: Add support for USR298x PCI Modems
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt fixes from Greg KH: "Here are some USB fixes for 6.4-rc3, as well as a driver core fix that resolves a memory leak that shows up in USB devices easier than other subsystems. Included in here are: - driver core memory leak as reported and tested by syzbot and developers - dwc3 driver fixes for reported problems - xhci driver fixes for reported problems - USB gadget driver reverts to resolve regressions - usbtmc driver fix for syzbot reported problem - thunderbolt driver fixes for reported issues - other small USB fixes All of these, except for the driver core fix, have been in linux-next with no reported problems. The driver core fix was tested and verified to solve the issue by syzbot and the original reporter" * tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: driver core: class: properly reference count class_dev_iter() xhci: Fix incorrect tracking of free space on transfer rings xhci-pci: Only run d3cold avoidance quirk for s2idle usb-storage: fix deadlock when a scsi command timeouts more than once usb: dwc3: fix a test for error in dwc3_core_init() usb: typec: tps6598x: Fix fault at module removal usb: gadget: u_ether: Fix host MAC address case usb: typec: altmodes/displayport: fix pin_assignment_show Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started" Revert "usb: gadget: udc: core: Prevent redundant calls to pullup" usb: gadget: drop superfluous ':' in doc string usb: dwc3: debugfs: Resume dwc3 before accessing registers USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value usb: dwc3: fix gadget mode suspend interrupt handler issue usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume() USB: usbtmc: Fix direction for 0-length ioctl control messages thunderbolt: Clear registers properly when auto clear isn't in use -
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - More device quirks (Sagi, Hristo, Adrian, Daniel) - Controller delete race (Maurizo) - Multipath cleanup fix (Christoph) - Deny writeable mmap mapping on a readonly block device (Loic) - Kill unused define that got introduced by accident (Christoph) - Error handling fix for s390 dasd (Stefan) - ublk locking fix (Ming) * tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux: block: remove NFL4_UFLG_MASK block: Deny writable memory mapping if block is read-only s390/dasd: fix command reject error on ESE devices nvme-pci: Add quirk for Teamgroup MP33 SSD ublk: fix AB-BA lockdep warning nvme: do not let the user delete a ctrl before a complete initialization nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk nvme-pci: clamp max_hw_sectors based on DMA optimized limitation nvme-pci: add quirk for missing secondary temperature thresholds nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G -
Christoph Hellwig authored
The NFL4_UFLG_MASK define slipped in in commit 9208d414 ("block: add a ->get_unique_id method") and should never have been added, as NFSD as the only user of it already has it's copy. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Alan Stern authored
The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com Signed-off-by:
-
Niklas Schnelle authored
Just below the removed lines par->clk_wr_offset is hard coded to 3 so there is no use in determining a different clock just to then ignore it anyway. This also removes the only I/O port use remaining in the driver allowing it to be built without CONFIG_HAS_IOPORT. Link: https://lore.kernel.org/all/ZBx5aLo5h546BzBt@intel.com/Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by:
-
Arnd Bergmann authored
Building with W=1 shows that a header needs to be included to make the prototypes visible: drivers/video/fbdev/i810/i810_dvt.c:194:6: error: no previous prototype for 'round_off_xres' [-Werror=missing-prototypes] drivers/video/fbdev/i810/i810_dvt.c:233:6: error: no previous prototype for 'i810fb_encode_registers' [-Werror=missing-prototypes] drivers/video/fbdev/i810/i810_dvt.c:245:6: error: no previous prototype for 'i810fb_fill_var_timings' [-Werror=missing-prototypes] drivers/video/fbdev/i810/i810_dvt.c:279:5: error: no previous prototype for 'i810_get_watermark' [-Werror=missing-prototypes] Adding the header leads to another warning from a mismatched prototype, so fix this as well: drivers/video/fbdev/i810/i810_dvt.c:280:5: error: conflicting types for 'i810_get_watermark'; have 'u32(struct fb_var_screeninfo *, Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Arnd Bergmann authored
There is a global function with this name on sparc, but no global declaration: drivers/video/fbdev/core/fbmem.c:1469:15: error: no previous prototype for 'get_fb_unmapped_area' Make the generic definition static to avoid this warning. On sparc, this is never seen. Edit by Helge: Update Kconfig text as suggested by Geert Uytterhoeven. Signed-off-by:
-
Loic Poulain authored
User should not be able to write block device if it is read-only at block level (e.g force_ro attribute). This is ensured in the regular fops write operation (blkdev_write_iter) but not when writing via user mapping (mmap), allowing user to actually write a read-only block device via a PROT_WRITE mapping. Example: This can lead to integrity issue of eMMC boot partition (e.g mmcblk0boot0) which is read-only by default. To fix this issue, simply deny shared writable mapping if the block is readonly. Note: Block remains writable if switch to read-only is performed after the initial mapping, but this is expected behavior according to commit a32e236e ("Partially revert "block: fail op_is_write() requests to read-only partitions"")'. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Reviewed-by:
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular fixes pull, amdgpu and msm make up most of these, nothing too serious, also one i915 and one exynos. I didn't get a misc fixes pull this week (one of the maintainers is off, so have to engage the backup) so I think there are a few outstanding patches that will show up next week, amdgpu: - update gfx11 clock counter logic - Fix a race when disabling gfxoff on gfx10/11 for profiling - Raven/Raven2/PCO clock counter fix - Add missing get_vbios_fb_size for GMC 11 - Fix a spurious irq warning in the device remove case - Fix possible power mode mismatch between driver and PMFW - USB4 fix exynos: - fix build warning i915: - fix missing NULL check in HDCP code msm: - display: - msm8998: fix fetch and qos to align with downstream - msm8998: fix LM pairs to align with downstream - remove unused INTF0 interrupt mask on some chipsets - remove TE2 block from relevant chipsets - relocate non-MDP_TOP offset to different header - fix some indentation - fix register offets/masks for dither blocks - make ping-ping block length 0 - remove duplicated defines - fix log mask for writeback block - unregister the hdmi codec for dp during unbind - fix yaml warnings - gpu: - fix submit error path leak - arm-smmu-qcom fix for regression that broke per-process page tables - fix no-iommu crash" * tag 'drm-fixes-2023-05-20' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/amd/display: enable dpia validate drm/amd/pm: fix possible power mode mismatch between driver and PMFW drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged drm/amdgpu/gmc11: implement get_vbios_fb_size() drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as well drm/amdgpu/gfx10: Disable gfxoff before disabling powergating. drm/amdgpu/gfx11: update gpu_clock_counter logic drm/msm: Be more shouty if per-process pgtables aren't working iommu/arm-smmu-qcom: Fix missing adreno_smmu's drm/i915/hdcp: Check if media_gt exists drm/exynos: fix g2d_open/close helper function definitions drm/msm: Fix submit error-path leaks drm/msm/iommu: Fix null pointer dereference in no-IOMMU case dt-bindings: display/msm: dsi-controller-main: Document qcom, master-dsi and qcom, sync-dual-dsi drm/msm/dpu: Remove duplicate register defines from INTF drm/msm/dpu: Set PINGPONG block length to zero for DPU >= 7.0.0 drm/msm/dpu: Use V2 DITHER PINGPONG sub-block in SM8[34]50/SC8280XP drm/msm/dpu: Fix PP_BLK_DIPHER -> DITHER typo drm/msm/dpu: Reindent REV_7xxx interrupt masks with tabs ... -
Stefan Haberland authored
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy relation might fail with the following error: dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09 [...] 24 Byte: 0 MSG 4, no MSGb to SYSOP During format of an ESE disk the Release Allocated Space command is used. A bit in the payload of the command is set that is not allowed to be set for devices in a copy relation. This bit is set to allow the partial release of an extent. Check for the existence of a copy relation before setting the respective bit. Fixes: 91dc4a19 ("s390/dasd: Add new ioctl to release space") Cc: stable@kernel.org # 5.3+ Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.comSigned-off-by:
-
