- 10 Sep, 2005 7 commits
-
-
Sam Ravnborg authored
iThis fixes a bug where the generated asm-offsets.h file was saved in the source tree even with make O=. Thanks to Stephen Rothwell <sfr@canb.auug.org.au> for the report. Signed-off-by:Sam Ravnborg <sam@ravnborg.org>
-
Sam Ravnborg authored
Use foo := $(call objectify, $(foo)) to prefix $(foo) with $(obj)/ unless $(foo) is an absolute path. For now no in-tree users - soon to come. Signed-off-by: -
Roland McGrath authored
GCC 4 emits more DWARF debugging information than before and there is now a .debug_loc section as well. This causes "make buildcheck" to fail. Rather than just add that one to the special case list, I used a regexp to ignore any .debug_ANYTHING sections in case more show up in the future. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Jan Beulich authored
Splitting of autoconf.h requires that split-include was built before, and needs to be-re-done when split-include changes. This dependency was previously missing. Additionally, since autoconf.h is (suppoosed to be) generated as a side effect of executing config targets, include/linux should be created prior to running the respective sub-make. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Jan Beulich authored
In order to maintain a more correct build number, updates to the version number should only be commited after a successful link of vmlinux, not before (so that errors in the link process don't lead to pointless increments). Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Allows to add to sparse arguments without mutilating makefiles - just pass CF=<arguments> and they will be added to CHECKFLAGS. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Zach Brown authored
Dunno if there was a conscious decision to leave it out, but if you're happy with adding some help text for it here's a patch against 2.6.13-mm1.. Signed-off-by:
-
- 09 Sep, 2005 33 commits
-
-
NeilBrown authored
This shouldn't be a BUG. We should cope. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by:
-
NeilBrown authored
There was another case where sb_size wasn't being set, so instead do the sensible thing and set if when filling in the content of a superblock. That ensures that whenever we write a superblock, the sb_size MUST be set. Signed-off-by:
-
NeilBrown authored
[PATCH] md: make sure the new 'sb_size' is set properly device added without pre-existing superblock. There are two ways to add devices to an md/raid array. It can have superblock written to it, and then given to the md driver, which will read the superblock (the new way) or md can be told (through SET_ARRAY_INFO) the shape of the array, and the told about individual drives, and md will create the required superblock (the old way). The newly introduced sb_size was only set for drives being added the new way, not the old ways. Oops :-( Signed-off-by:
-
NeilBrown authored
Just like failed drives have (F), so spare drives now have (S). Signed-off-by:
-
NeilBrown authored
Leave it unchanged if the original (0.90) is used, incase it might be a compatability problem. Signed-off-by:
-
NeilBrown authored
Doh. I want the physical hard-sector-size, not the current block size... Signed-off-by:
-
NeilBrown authored
On reflection, a better default location for hot-adding bitmaps with version-1 superblocks is immediately after the superblock. There might not be much room there, but there is usually atleast 3k, and that is a good start. Signed-off-by:
-
NeilBrown authored
The bitmap code used to have two daemons, so there is some 'common' start/stop code. But now there is only one, so the common code is just noise. This patch tidies this up somewhat. Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
NeilBrown authored
mddev->bitmap gets clearred before the writeback daemon is stopped. So the write_back daemon needs to be careful not to dereference the 'bitmap' if it is NULL. Signed-off-by:
-
NeilBrown authored
Switch MD to use the kthread infrastructure, to simplify the code and get rid of tasklist_lock abuse in md_unregister_thread. Also don't flush signals in md_thread, as the called thread will always do that. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
NeilBrown authored
This is a direct port of the raid5 patch. Signed-off-by:
-
NeilBrown authored
Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by:
-
NeilBrown authored
version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by:
-
NeilBrown authored
These inlines haven't been used for ages, they should go. Signed-off-by:
-
NeilBrown authored
read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by:
-
NeilBrown authored
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by:
-
NeilBrown authored
It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by:
-
NeilBrown authored
When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by:
-
NeilBrown authored
The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by:
-
NeilBrown authored
A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by:
-
NeilBrown authored
linear currently uses division by the size of the smallest componenet device to find which device a request goes to. If that smallest device is larger than 2 terabytes, then the division will not work on some systems. So we introduce a pre-shift, and take care not to make the hash table too large, much like the code in raid0. Also get rid of conf->nr_zones, which is not needed. Signed-off-by:
-
NeilBrown authored
If a device is flagged 'WriteMostly' and the array has a bitmap, and the bitmap superblock indicates that write_behind is allowed, then write_behind is enabled for WriteMostly devices. Write requests will be acknowledges as complete to the caller (via b_end_io) when all non-WriteMostly devices have completed the write, but will not be cleared from the bitmap until all devices complete. This requires memory allocation to make a local copy of the data being written. If there is insufficient memory, then we fall-back on normal write semantics. Signed-Off-By:
Paul Clements <paul.clements@steeleye.com> Signed-off-by:
-
NeilBrown authored
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by:
-
NeilBrown authored
Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by:
-
NeilBrown authored
When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by:
-
NeilBrown authored
... otherwise we loose a reference and can never free the file. Signed-off-by:
-
Jun'ichi Nomura authored
Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by:Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
NeilBrown authored
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by:
-
NeilBrown authored
'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Don't just irritate all other kernel developers. Fix the users first, then you can re-introduce the must-check infrastructure to avoid new cases creeping in. Signed-off-by: -
Linus Torvalds authored
Fix up fs/compat.c fixes.
-
