- 20 Jun, 2021 7 commits
-
-
Heiner Kallweit authored
Why shall we bother to open-code something that the compiler can do for us. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Heiner Kallweit authored
Polling uses the same timeout as irq mode: 400 * 500us = 200ms = HZ / 5. So let's use the adapter->timeout value also for polling. This has the advantage that userspace can control the timeout value for polling as well. In addition change the code to make it better readable. Last but not least remove the timeout debug messages. Calls to both functions are followed by a call to i801_check_post() that will print an error message in case of timeout. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Andy Shevchenko authored
The driver is run on the platforms where OF node is always NULL. The confusion comes from IRQ domain APIs that take either OF or firmware node as input parameter. Since fwnode is not used here either, replace of_node by NULL. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Biju Das authored
RZ/G2L i2c controller is compatible with RZ/A i2c controller. By default IP is in reset state, so need to perform release reset before accessing any register. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Biju Das authored
Document RZ/G2L I2C controller bindings. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
Convert the Renesas R-Mobile I2C Bus Interface (IIC) Device Tree binding documentation to json-schema. Document missing properties. R-Mobile A1 and SH-Mobile have multiple interrupts. Update the example to match reality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
According to the Hardware User's Manual, automatic transmission for PMIC control (DVFS) is not available on the R-Car E3 and RZ/G2E SoC. Experiments showed this really means that support for automatic DVFS is not present, while the IIC automatic transmission feature itself is still available, albeit not super useful. Hence there is no longer a reason not to declare compatibility with the R-Car Gen3-specific and generic versions, and the corresponding paragraph can be dropped. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
- 04 Jun, 2021 3 commits
-
-
Geert Uytterhoeven authored
The "reset-active-low" property was removed from the ssd1307fb bindings in commit 519b4dba ("fbdev: ssd1307fb: Remove reset-active-low from the DT binding document") and from the ssd1307fb binding examples in commit 7d7e58d3 ("dt-bindings: display: ssd1307fb: Remove reset-active-low from examples"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Vignesh Raghavendra authored
Convert i2c-omap.txt to YAML schema for better checks and documentation. Following properties were used in DT but were not documented in txt bindings and has been included in YAML schema: 1. Include ti,am4372-i2c compatible 2. Document clocks property Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
The people on linux-renesas-soc are interested in changes to the Renesas I2C drivers and their DT bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
- 28 May, 2021 9 commits
-
-
Hsin-Yi Wang authored
Add vbus-supply which provides power to SCL/SDA. Pass this regulator into core so it can be turned on/off for low power mode support. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Hsin-Yi Wang authored
Add vbus-supply property for mt65xx. The regulator can be passed into core and turned off during suspend/sleep to reduce power consumption. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Bibby Hsieh authored
Although in the most platforms, the bus power of i2c are alway on, some platforms disable the i2c bus power in order to meet low power request. We can control bulk regulator if it is provided in i2c adapter device. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Andy Shevchenko authored
One may notice that dev_printk(KERN_DEBUG ...) is *not* an equivalent to dev_dbg(). It will be printed whenever loglevel is high enough. And currently it will be the only message in the I²C core in some configurations that got printed under above conditions. Moving to dev_dbg() will hide it in the configurations where Dynamic Debug is enabled and hence align with all other debug messages in the I²C core.. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
Convert the Renesas RZ/A I2C Bus Interface (RIIC) Device Tree binding documentation to json-schema. Document missing properties. Update the example to match reality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
Convert the Renesas EMMA Mobile EV2 IIC Interface (IIC) Device Tree binding documentation to json-schema. Document missing properties. Update the example to match reality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
Convert the Renesas R-Car I2C Controller Device Tree binding documentation to json-schema. Document missing properties. Make the clocks property required. DMA is supported on R-Car Gen3 and RZ/G2 only. Update the example to match reality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
The compatible value "renesas,i2c-rcar" was deprecated in commit ad4a8dc3 ("i2c: rcar: Add per-Generation fallback bindings"), and never had any users in upstream Linux. Drop its description from the DT bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Geert Uytterhoeven authored
The compatible value "renesas,i2c-rcar" was deprecated in commit ad4a8dc3 ("i2c: rcar: Add per-Generation fallback bindings"), and never had any users in upstream Linux. Drop its match entry from the driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
- 27 May, 2021 5 commits
-
-
Qii Wang authored
Rename i2c irq name with dev_name() which can provide unique naming in /proc/interrupts for each instance of the I2C IP core. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Heiner Kallweit authored
Layout of these registers is part of the PCI standard. Therefore use the constants defined by the PCI subsystem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Heiner Kallweit authored
Using the completion API is more intuitive and it allows to simplify the code. Note that we don't have to set priv->status = 0 any longer with the completion API. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Heiner Kallweit authored
When passing -ETIMEDOUT to i801_check_post() it will emit a timeout error message. I don't see much benefit in an additional warning stating more or less the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Zev Weiss authored
The ast25xx and ast26xx have, respectively, two and three configurable slave device addresses to the ast24xx's one. We only support using one at a time, but the others may come up in an indeterminate state depending on hardware/bootloader behavior, so we need to make sure we disable them so as to avoid ending up with phantom devices on the bus. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
- 25 May, 2021 4 commits
-
-
Alain Volmat authored
Add support for the SMBus-Alert protocol to the STM32F7 that has dedicated control and status logic. If SMBus-Alert is used, the SMBALERT# pin must be configured as alternate function for I2C Alert. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Alain Volmat authored
Since SMBus-Alert is an optional feature of SMBUS which requires an additional pin, the smbus binding cannot be used to indicate its support. Add an additional smbus-alert binding specific for it and update the description text of smbus to avoid mentioning SMBus-Alert Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Jonathan Marek authored
SM8250 CCI is the same as SDM845, add an equivalent compatible for SM8250. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Liang Chen authored
add "rockchip,rk3568-i2c", "rockchip,rk3399-i2c" for i2c nodes on a rk3568 platform to i2c-rk3x.yaml. Signed-off-by: Liang Chen <cl@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
- 23 May, 2021 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two perf fixes: - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as this can cause malfunction when TOS is not supported - Allocate the LBR XSAVE buffers along with the DS buffers upfront because allocating them when adding an event can deadlock" * tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "Two locking fixes: - Invoke the lockdep tracepoints in the correct place so the ordering is correct again - Don't leave the mutex WAITER bit stale when the last waiter is dropping out early due to a signal as that forces all subsequent lock operations needlessly into the slowpath until it's cleaned up again" * tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal locking/lockdep: Correct calling tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A few fixes for irqchip drivers: - Allocate interrupt descriptors correctly on Mainstone PXA when SPARSE_IRQ is enabled; otherwise the interrupt association fails - Make the APPLE AIC chip driver depend on APPLE - Remove redundant error output on devm_ioremap_resource() failure" * tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Remove redundant error printing irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Fix how SEV handles MMIO accesses by forwarding potential page faults instead of killing the machine and by using the accessors with the exact functionality needed when accessing memory. - Fix a confusion with Clang LTO compiler switches passed to the it - Handle the case gracefully when VMGEXIT has been executed in userspace * tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use __put_user()/__get_user() for data accesses x86/sev-es: Forward page-faults which happen during emulation x86/sev-es: Don't return NULL from sev_es_get_ghcb() x86/build: Fix location of '-plugin-opt=' flags x86/sev-es: Invalidate the GHCB after completing VMGEXIT x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or later with glibc >= 2.33). - Fix early_ioremap() on 64-bit, which broke booting on some machines. Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and Christophe Leroy. * tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls powerpc: Fix early setup to make early_ioremap() work
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix short log indentation for tools builds - Fix dummy-tools to adjust to the latest stackprotector check * tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: dummy-tools: adjust to stricter stackprotector check scripts/jobserver-exec: Fix a typo ("envirnoment") tools build: Fix quiet cmd indentation
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "10 patches. Subsystems affected by this patch series: mm (pagealloc, gup, kasan, and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: userfaultfd: hugetlbfs: fix new flag usage in error path lib: kunit: suppress a compilation warning of frame size proc: remove Alexey from MAINTAINERS linux/bits.h: fix compilation error with GENMASK watchdog: reliable handling of timestamps kasan: slab: always reset the tag in get_freepointer_safe() tools/testing/selftests/exec: fix link error ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry Revert "mm/gup: check page posion status for coredump." mm/shuffle: fix section mismatch warning
-
Mike Kravetz authored
In commit d6995da3 ("hugetlb: use page.private for hugetlb specific page flags") the use of PagePrivate to indicate a reservation count should be restored at free time was changed to the hugetlb specific flag HPageRestoreReserve. Changes to a userfaultfd error path as well as a VM_BUG_ON() in remove_inode_hugepages() were overlooked. Users could see incorrect hugetlb reserve counts if they experience an error with a UFFDIO_COPY operation. Specifically, this would be the result of an unlikely copy_huge_page_from_user error. There is not an increased chance of hitting the VM_BUG_ON. Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com Fixes: d6995da3 ("hugetlb: use page.private for hugetlb specific page flags") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mina Almasry <almasry.mina@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zhen Lei authored
lib/bitfield_kunit.c: In function `test_bitfields_constants': lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful for kernel devs running the KUnit test harness, and not intended for inclusion into a production build". Therefore, it is not worth modifying variable 'test_bitfields_constants' to clear this warning. Just suppress it. Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.comSigned-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
People Cc me and I don't have time. Link: https://lkml.kernel.org/r/YKarMxHJBIhMHQIh@localhost.localdomainSigned-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rikard Falkeborn authored
GENMASK() has an input check which uses __builtin_choose_expr() to enable a compile time sanity check of its inputs if they are known at compile time. However, it turns out that __builtin_constant_p() does not always return a compile time constant [0]. It was thought this problem was fixed with gcc 4.9 [1], but apparently this is not the case [2]. Switch to use __is_constexpr() instead which always returns a compile time constant, regardless of its inputs. Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk [0] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1] Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp [2] Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.comSigned-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-