- 21 Aug, 2017 8 commits
-
-
David Daney authored
If the kernel is configured with preemption enabled we were getting warning stack traces for use of current_cpu_type(). Fix by moving the test between preempt_disable()/preempt_enable() and caching the results of the CPU type tests for use during code generation. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make these const as they are only passed as an argument to the function device_create_file and device_remove_file and the corresponding arguments are of type const. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-08-21 1) Support RX checksum with IPsec crypto offload for esp4/esp6. From Ilan Tayari. 2) Fixup IPv6 checksums when doing IPsec crypto offload. From Yossi Kuperman. 3) Auto load the xfrom offload modules if a user installs a SA that requests IPsec offload. From Ilan Tayari. 4) Clear RX offload informations in xfrm_input to not confuse the TX path with stale offload informations. From Ilan Tayari. 5) Allow IPsec GSO for local sockets if the crypto operation will be offloaded. 6) Support setting of an output mark to the xfrm_state. This mark can be used to to do the tunnel route lookup. From Lorenzo Colitti. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rick Farrington authored
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w). If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg, try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Jaillet authored
If 'irq_of_parse_and_map()' or 'of_address_to_resource()' fail, 'err' is known to be 0 at this point. So return -ENODEV instead in the first case and use 'of_iomap()' instead of the equivalent 'of_address_to_resource()/ioremap()' combinaison in the 2nd case. Doing so, the 'rsrc_regs' field of the 'emac_instance struct' becomes redundant and is removed. While at it, turn a 'err != 0' test into an equivalent 'err' to be more consistent. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Implement new 32-bit Firmware Port Capabilities in order to handle new speeds which couldn't be represented in the old 16-bit Firmware Port Capabilities values. Based on the original work of Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
In the current code, dev_map_free() can still race with dev_map_notification(). In dev_map_free(), we remove dtab from the list of dtabs after we purged all entries from it. However, we don't do xchg() with NULL or the like, so the entry at that point is still pointing to the device. If a unregister notification comes in at the same time, we therefore risk a double-free, since the pointer is still present in the map, and then pushed again to __dev_map_entry_free(). All this is completely unnecessary. Just remove the dtab from the list right before the synchronize_rcu(), so all outstanding readers from the notifier list have finished by then, thus we don't need to deal with this corner case anymore and also wouldn't need to nullify dev entires. This is fine because we iterate over the map releasing all entries and therefore dev references anyway. Fixes: 4cc7b954 ("bpf: devmap fix mutex in rcu critical section") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Aug, 2017 31 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2017-08-17 Some updates for mlx5 ethernet and IPoIB device driver. Eran added the support for manage physical link state from netdevice upon interface open/close requests. Feras fixed the driver name showed in ethtool for IPoIB interfaces. Shalom Added the support for IPoIB netdevice ethtool get link settings. Gal and Eran exposed new diagnostic counters for outbound PCIe stalls and overflow and RX buffer fullness statistics. Code cleanups from Or Gerlitz. Variable types cleanup from Gal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
The byte offset of counter descriptors should be stored in size_t variable instead of an integer. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gal Pressman authored
Fix checkpatch errors: CHECK:PREFER_KERNEL_TYPES: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
To fix these checkpatch complaints: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
To fix these checkpatch complaints: CHECK: Please don't use multiple blank lines Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
To fix these checkpatch complaints: WARNING: suspect code indent for conditional statements (8, 24) + if (eth_proto & (MLX5E_PROT_MASK(MLX5E_10GBASE_SR) [...] + return PORT_FIBRE; Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
To fix these checkpatch complaints: WARNING: Missing a blank line after declarations Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
To fix these checkpatch complaints: CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eran Ben Elisha authored
Add outbound_pci_buffer_overflow to ethtool output for monitoring the number of packets that were dropped due to lack of PCIe buffers on receive path from NIC port toward the host(s). This counter is valid only in case that tx_overflow_buffer_pkt is supported in MCAM enhanced features. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gal Pressman authored
rx_buffer_passed_thres_phy - The number of events where the port RX buffer has passed a fullness threshold. rx_buffer_full_phy - The number of events where the port RX buffer has reached 100% fullness. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gal Pressman authored
Add capability bit in PCAM register and counters to PPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gal Pressman authored
outbound_pci_stalled_rd - The percentage of time within the last second that the NIC had outbound non-posted read requests but could not perform the operation due to insufficient non-posted credits. outbound_pci_stalled_wr - The percentage of time within the last second that the NIC had outbound posted writes requests but could not perform the operation due to insufficient posted credits. outbound_pci_stalled_rd_events - The number of events where outbound_pci_stalled_rd was above the threshold. outbound_pci_stalled_wr_events - The number of events where outbound_pci_stalled_wr was above the threshold. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gal Pressman authored
Add capability bit in MCAM register and counters to MPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Shalom Lagziel authored
Add support for "ethtool DEVNAME" over ipoib ports, Display standard port information for IPoIB netdevices using ethtool For example: $ ethtool ib2 > Settings for ib2: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off Link detected: yes Signed-off-by: Shalom Lagziel <shaloml@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Feras Daoud authored
Printing an enhanced IPoIB device information using "ethtool -i DEVNAME", prints the low level driver name: mlx5_core. This commit changes the name to mlx5_core [ib_ipoib], to include the ipoib device driver infromation. Fixes: 076b0936 ("net/mlx5e: IPoIB, Add ethtool support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Eran Ben Elisha authored
Upon interface up/down, driver will send PAOS (Ports Administrative and Operational Status Register) in order to inform the Firmware on the desired status of the port by the driver. Since now we might change physical link status on mlx5e_open/close, logical VF representor should not use mlx5e_open/close ndos as is, and should call the logical version mlx5e_open/closed_locked. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
David S. Miller authored
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF inline improvements First one makes htab inlining more robust wrt future jits and second one inlines map in map lookups through map_gen_lookup() callback. v1 -> v2: - BITS_PER_LONG guard in patch 1 - BPF_EMIT_CALL is on __htab_map_lookup_elem ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Avoid two successive functions calls for the map in map lookup, first is the bpf_map_lookup_elem() helper call, and second the callback via map->ops->map_lookup_elem() to get to the map in map implementation. Implementation inlines array and htab flavor for map in map lookups. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Commit 9015d2f5 ("bpf: inline htab_map_lookup_elem()") was making the assumption that a direct call emission to the function __htab_map_lookup_elem() will always work out for JITs. This is currently true since all JITs we have are for 64 bit archs, but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer dereference when executing the call to __htab_map_lookup_elem() since passed arguments are of a different size (due to pointer args) than what we do out of BPF. Guard and thus limit this for now for the current 64 bit JITs only. Reported-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Martin KaFai Lau says: ==================== bpf: Allow selecting numa node during map creation This series allows user to pick the numa node during map creation. The first patch has the details ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch makes the needed changes to allow each process of the INNER_LRU_HASH_PREALLOC test to provide its numa node id when creating the lru map. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in a netdev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trival fix to spelling mistakes: firware -> firmware invald -> invalid mutilcast -> multicast Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arvind Yadav says: ==================== constify net eisa_device_id eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Aug, 2017 1 commit
-
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: add basic ethtool callbacks to representors This set extends the basic ethtool functionality to representor netdevs. I start with providing link state via ethtool and then move on to functions such as driver information, statistics and FW log dump. The series contains a number of clean ups to the ethtool stats code too, some of the logic is simplified by making better use of the nfp_port abstraction. The stats we expose on representors are only the PCIe and MAC port statistics firmware maintains for us. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-