- 19 Apr, 2016 2 commits
-
-
Alan Stern authored
[ Upstream commit 972e6a99 ] The usbhid driver has inconsistently duplicated code in its post-reset, resume, and reset-resume pathways. reset-resume doesn't check HID_STARTED before trying to restart the I/O queues. resume fails to clear the HID_SUSPENDED flag if HID_STARTED isn't set. resume calls usbhid_restart_queues() with usbhid->lock held and the others call it without holding the lock. The first item in particular causes a problem following a reset-resume if the driver hasn't started up its I/O. URB submission fails because usbhid->urbin is NULL, and this triggers an unending reset-retry loop. This patch fixes the problem by creating a new subroutine, hid_restart_io(), to carry out all the common activities. It also adds some checks that were missing in the original code: After a reset, there's no need to clear any halted endpoints. After a resume, if a reset is pending there's no need to restart any I/O until the reset is finished. After a resume, if the interrupt-IN endpoint is halted there's no need to submit the input URB until the halt has been cleared. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Daniel Fraga <fragabr@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Sasha Levin authored
Signed-off-by:
-
- 18 Apr, 2016 38 commits
-
-
Hyungwon Hwang authored
[ Upstream commit 023d8218 ] The commit [bd481285: ALSA: hda - Fix forgotten HDMI monitor_present update] covered the missing update of monitor_present flag, but this caused a regression for devices without the i915 eld notifier. Since the old code supposed that pin_eld->monitor_present was updated by the caller side, the hdmi_present_sense_via_verbs() doesn't update the temporary eld->monitor_present but only pin_eld->monitor_present, which is now overridden in update_eld(). The fix is to update pin_eld->monitor_present as well before calling update_eld(). Note that this may still leave monitor_present flag in an inconsistent state when the driver repolls, but this is at least the old behavior. More proper fix will follow in the later patch. Fixes: bd481285 ('ALSA: hda - Fix forgotten HDMI monitor_present update') Signed-off-by:
Hyungwon Hwang <hyungwon.hwang7@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Cyrille Pitchen authored
[ Upstream commit 9b52d55f ] The change fixes potential oops while accessing iomem on invalid address, if devm_ioremap_resource() fails due to some reason. The devm_ioremap_resource() function returns ERR_PTR() and never returns NULL, which makes useless a following check for NULL. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Fixes: b0e8b341 ("crypto: atmel - use devm_xxx() managed function") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
dann frazier authored
[ Upstream commit 67dfa175 ] GCC6 (and Linaro's 2015.12 snapshot of GCC5) has a new default that uses adrp/ldr or adrp/add to address literal pools. When CONFIG_ARM64_ERRATUM_843419 is enabled, modules built with this toolchain fail to load: module libahci: unsupported RELA relocation: 275 This patch fixes the problem by passing '-mpc-relative-literal-loads' to the compiler. Cc: stable@vger.kernel.org Fixes: df057cc7 ("arm64: errata: add module build workaround for erratum #843419") BugLink: http://bugs.launchpad.net/bugs/1533009Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by:
Christophe Lyon <christophe.lyon@linaro.org> Signed-off-by:
Dann Frazier <dann.frazier@canonical.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Vlastimil Babka authored
[ Upstream commit d9dddbf5 ] Hanjun Guo has reported that a CMA stress test causes broken accounting of CMA and free pages: > Before the test, I got: > -bash-4.3# cat /proc/meminfo | grep Cma > CmaTotal: 204800 kB > CmaFree: 195044 kB > > > After running the test: > -bash-4.3# cat /proc/meminfo | grep Cma > CmaTotal: 204800 kB > CmaFree: 6602584 kB > > So the freed CMA memory is more than total.. > > Also the the MemFree is more than mem total: > > -bash-4.3# cat /proc/meminfo > MemTotal: 16342016 kB > MemFree: 22367268 kB > MemAvailable: 22370528 kB Laura Abbott has confirmed the issue and suspected the freepage accounting rewrite around 3.18/4.0 by Joonsoo Kim. Joonsoo had a theory that this is caused by unexpected merging between MIGRATE_ISOLATE and MIGRATE_CMA pageblocks: > CMA isolates MAX_ORDER aligned blocks, but, during the process, > partialy isolated block exists. If MAX_ORDER is 11 and > pageblock_order is 9, two pageblocks make up MAX_ORDER > aligned block and I can think following scenario because pageblock > (un)isolation would be done one by one. > > (each character means one pageblock. 'C', 'I' means MIGRATE_CMA, > MIGRATE_ISOLATE, respectively. > > CC -> IC -> II (Isolation) > II -> CI -> CC (Un-isolation) > > If some pages are freed at this intermediate state such as IC or CI, > that page could be merged to the other page that is resident on > different type of pageblock and it will cause wrong freepage count. This was supposed to be prevented by CMA operating on MAX_ORDER blocks, but since it doesn't hold the zone->lock between pageblocks, a race window does exist. It's also likely that unexpected merging can occur between MIGRATE_ISOLATE and non-CMA pageblocks. This should be prevented in __free_one_page() since commit 3c605096 ("mm/page_alloc: restrict max order of merging on isolated pageblock"). However, we only check the migratetype of the pageblock where buddy merging has been initiated, not the migratetype of the buddy pageblock (or group of pageblocks) which can be MIGRATE_ISOLATE. Joonsoo has suggested checking for buddy migratetype as part of page_is_buddy(), but that would add extra checks in allocator hotpath and bloat-o-meter has shown significant code bloat (the function is inline). This patch reduces the bloat at some expense of more complicated code. The buddy-merging while-loop in __free_one_page() is initially bounded to pageblock_border and without any migratetype checks. The checks are placed outside, bumping the max_order if merging is allowed, and returning to the while-loop with a statement which can't be possibly considered harmful. This fixes the accounting bug and also removes the arguably weird state in the original commit 3c605096 where buddies could be left unmerged. Fixes: 3c605096 ("mm/page_alloc: restrict max order of merging on isolated pageblock") Link: https://lkml.org/lkml/2016/3/2/280Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Hanjun Guo <guohanjun@huawei.com> Tested-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Debugged-by:
Laura Abbott <labbott@redhat.com> Debugged-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit d00181b9 ] Let's try to be consistent about data type of page order. [sfr@canb.auug.org.au: fix build (type of pageblock_order)] [hughd@google.com: some configs end up with MAX_ORDER and pageblock_order having different types] Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Mel Gorman authored
[ Upstream commit d70ddd7a ] __free_pages_bootmem prepares a page for release to the buddy allocator and assumes that the struct page is initialised. Parallel initialisation of struct pages defers initialisation and __free_pages_bootmem can be called for struct pages that cannot yet map struct page to PFN. This patch passes PFN to __free_pages_bootmem with no other functional change. Signed-off-by:
Mel Gorman <mgorman@suse.de> Tested-by:
Nate Zimmer <nzimmer@sgi.com> Tested-by:
Waiman Long <waiman.long@hp.com> Tested-by:
Daniel J Blueman <daniel@numascale.com> Acked-by:
Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Joseph Qi authored
[ Upstream commit be12b299 ] When master handles convert request, it queues ast first and then returns status. This may happen that the ast is sent before the request status because the above two messages are sent by two threads. And right after the ast is sent, if master down, it may trigger BUG in dlm_move_lockres_to_recovery_list in the requested node because ast handler moves it to grant list without clear lock->convert_pending. So remove BUG_ON statement and check if the ast is processed in dlmconvert_remote. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reported-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joseph Qi authored
[ Upstream commit ac7cf246 ] There is a race window between dlmconvert_remote and dlm_move_lockres_to_recovery_list, which will cause a lock with OCFS2_LOCK_BUSY in grant list, thus system hangs. dlmconvert_remote { spin_lock(&res->spinlock); list_move_tail(&lock->list, &res->converting); lock->convert_pending = 1; spin_unlock(&res->spinlock); status = dlm_send_remote_convert_request(); >>>>>> race window, master has queued ast and return DLM_NORMAL, and then down before sending ast. this node detects master down and calls dlm_move_lockres_to_recovery_list, which will revert the lock to grant list. Then OCFS2_LOCK_BUSY won't be cleared as new master won't send ast any more because it thinks already be authorized. spin_lock(&res->spinlock); lock->convert_pending = 0; if (status != DLM_NORMAL) dlm_revert_pending_convert(res, lock); spin_unlock(&res->spinlock); } In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set (res is still in recovering) or res master changed (new master has finished recovery), reset the status to DLM_RECOVERING, then it will retry convert. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vladis Dronov authored
[ Upstream commit 950336ba ] The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
John Dahlstrom authored
[ Upstream commit 4db9675d ] Some Lenovo ideapad models lack a physical rfkill switch. On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK, ideapad-laptop would wrongly report all radios as blocked by hardware which caused wireless network connections to fail. Add these models without an rfkill switch to the no_hw_rfkill list. Signed-off-by:
John Dahlstrom <jodarom@sdf.org> Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dabc: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked Cc: <stable@vger.kernel.org> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
H Hartley Sweeten authored
[ Upstream commit bd3a3cd6 ] Memory mapped io (dev->mmio) should not also be writing to the ioport (dev->iobase) registers. Add the missing 'else' to these functions. Fixes: 0953ee4a ("staging: comedi: ni_mio_common: checkpatch.pl cleanup (else not useful)") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Aurelien Jacquiot authored
[ Upstream commit 36915976 ] Fix deadlocking during concurrent receive and transmit operations on SMP platforms caused by the use of incorrect lock: on transmit 'tx_lock' spinlock should be used instead of 'lock' which is used for receive operation. This fix is applicable to kernel versions starting from v2.15. Signed-off-by:
Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 378c6520 ] This commit fixes the following security hole affecting systems where all of the following conditions are fulfilled: - The fs.suid_dumpable sysctl is set to 2. - The kernel.core_pattern sysctl's value starts with "/". (Systems where kernel.core_pattern starts with "|/" are not affected.) - Unprivileged user namespace creation is permitted. (This is true on Linux >=3.8, but some distributions disallow it by default using a distro patch.) Under these conditions, if a program executes under secure exec rules, causing it to run with the SUID_DUMP_ROOT flag, then unshares its user namespace, changes its root directory and crashes, the coredump will be written using fsuid=0 and a path derived from kernel.core_pattern - but this path is interpreted relative to the root directory of the process, allowing the attacker to control where a coredump will be written with root privileges. To fix the security issue, always interpret core_pattern for dumps that are written under SUID_DUMP_ROOT relative to the root directory of init. Signed-off-by:
Jann Horn <jann@thejh.net> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 03927c8a ] struct timeval on 32-bit systems will have its tv_sec value overflow in year 2038 and beyond. Use a 64 bit value to print time of the coredump in seconds. ktime_get_real_seconds is chosen here for efficiency reasons. Suggested by: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit 3debb0a9 ] The trace_printk() code will allocate extra buffers if the compile detects that a trace_printk() is used. To do this, the format of the trace_printk() is saved to the __trace_printk_fmt section, and if that section is bigger than zero, the buffers are allocated (along with a message that this has happened). If trace_printk() uses a format that is not a constant, and thus something not guaranteed to be around when the print happens, the compiler optimizes the fmt out, as it is not used, and the __trace_printk_fmt section is not filled. This means the kernel will not allocate the special buffers needed for the trace_printk() and the trace_printk() will not write anything to the tracing buffer. Adding a "__used" to the variable in the __trace_printk_fmt section will keep it around, even though it is set to NULL. This will keep the string from being printed in the debugfs/tracing/printk_formats section as it is not needed. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit e9ad4ec8 ] Moving the initialization earlier is needed in 4.6 because kvm_arch_init_vm is now using mmu_lock, causing lockdep to complain: [ 284.440294] INFO: trying to register non-static key. [ 284.445259] the code is fine but needs lockdep annotation. [ 284.450736] turning off the locking correctness validator. ... [ 284.528318] [<ffffffff810aecc3>] lock_acquire+0xd3/0x240 [ 284.533733] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.541467] [<ffffffff81715581>] _raw_spin_lock+0x41/0x80 [ 284.546960] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.554707] [<ffffffffa0305aa0>] kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.562281] [<ffffffffa02ece70>] kvm_mmu_init_vm+0x20/0x30 [kvm] [ 284.568381] [<ffffffffa02dbf7a>] kvm_arch_init_vm+0x1ea/0x200 [kvm] [ 284.574740] [<ffffffffa02bff3f>] kvm_dev_ioctl+0xbf/0x4d0 [kvm] However, it also helps fixing a preexisting problem, which is why this patch is also good for stable kernels: kvm_create_vm was incrementing current->mm->mm_count but not decrementing it at the out_err label (in case kvm_init_mmu_notifier failed). The new initialization order makes it possible to add the required mmdrop without adding a new error label. Cc: stable@vger.kernel.org Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit 2849eb4f ] A guest executing an invalid invept instruction would hang because the instruction pointer was not updated. Cc: stable@vger.kernel.org Fixes: bfd0a56bReviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
Himanshu Madhani authored
[ Upstream commit 5e47f198 ] This patch fixes an active I/O shutdown bug for fabric drivers using target_wait_for_sess_cmds(), where se_cmd descriptor shutdown would result in hung tasks waiting indefinitely for se_cmd->cmd_wait_comp to complete(). To address this bug, drop the incorrect list_del_init() usage in target_wait_for_sess_cmds() and always complete() during se_cmd target_release_cmd_kref() put, in order to let caller invoke the final fabric release callback into se_cmd->se_tfo->release_cmd() code. Reported-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit f75d4864 ] __clear_bit_unlock() is a special little snowflake. While it carries the non-atomic '__' prefix, it is specifically documented to pair with test_and_set_bit() and therefore should be 'somewhat' atomic. Therefore the generic implementation of __clear_bit_unlock() cannot use the fully non-atomic __clear_bit() as a default. If an arch is able to do better; is must provide an implementation of __clear_bit_unlock() itself. Specifically, this came up as a result of hackbench livelock'ing in slab_lock() on ARC with SMP + SLUB + !LLSC. The issue was incorrect pairing of atomic ops. slab_lock() -> bit_spin_lock() -> test_and_set_bit() slab_unlock() -> __bit_spin_unlock() -> __clear_bit() The non serializing __clear_bit() was getting "lost" 80543b8e: ld_s r2,[r13,0] <--- (A) Finds PG_locked is set 80543b90: or r3,r2,1 <--- (B) other core unlocks right here 80543b94: st_s r3,[r13,0] <--- (C) sets PG_locked (overwrites unlock) Fixes ARC STAR 9000817404 (and probably more). Reported-by:
Vineet Gupta <Vineet.Gupta1@synopsys.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Noam Camus <noamc@ezchip.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160309114054.GJ6356@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Victor Clément authored
[ Upstream commit 0ef21100 ] The Microsoft HD-5001 webcam microphone does not support sample rate reading as the HD-5000 one. This results in dmesg errors and sound hanging with pulseaudio. Signed-off-by:
Victor Clément <victor.clement@openmailbox.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit d6785d91 ] Running the following command: busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null with any tracing enabled pretty very quickly leads to various NULL pointer dereferences and VM BUG_ON()s, such as these: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) kernel BUG at include/linux/mm.h:367! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89 (busybox's cat uses sendfile(2), unlike the coreutils version) This is because tracing_splice_read_pipe() can call splice_to_pipe() with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and we fill the page pointers and the other fields of the pipe_buffers with garbage. All other callers of splice_to_pipe() avoid calling it when nr_pages == 0, and we could make tracing_splice_read_pipe() do that too, but it seems reasonable to have splice_to_page() handle this condition gracefully. Cc: stable@vger.kernel.org Signed-off-by:
Rabin Vincent <rabin@rab.in> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit a29054d9 ] If tracing contains data and the trace_pipe file is read with sendfile(), then it can trigger a NULL pointer dereference and various BUG_ON within the VM code. There's a patch to fix this in the splice_to_pipe() code, but it's also a good idea to not let that happen from trace_pipe either. Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 2.6.30+ Reported-by:
Rabin Vincent <rabin.vincent@gmail.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit bd481285 ] We forgot to copy monitor_present value when updating the ELD information. This won't change the ELD retrieval and the jack notification behavior, but appears only in the proc output. In that sense, it's no fatal error, but a bug is a bug is a bug. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit e90247f9 ] This is a preliminary patch for the later change to support ELD/jack handling with i915 audio component. This splits the ELD update code from hdmi_present_sense() so that it can be called from other places. Just a code refactoring, no functional change. Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 55ff8cfb ] The uas driver can never queue more then MAX_CMNDS (- 1) tags and tags are shared between luns, so there is no need to claim that we can_queue some random large number. Not claiming that we can_queue 65536 commands, fixes the uas driver failing to initialize while allocating the tag map with a "Page allocation failure (order 7)" error on systems which have been running for a while and thus have fragmented memory. Cc: stable@vger.kernel.org Reported-and-tested-by:
Yves-Alexis Perez <corsac@corsac.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 8835ba4a ] An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 0b818e39 ] Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by:
-
Josh Boyer authored
[ Upstream commit 4ec0ef3a ] The iowarrior driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. The full report of this issue can be found here: http://seclists.org/bugtraq/2016/Mar/87Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Dave Jones authored
[ Upstream commit 7834c103 ] Since 4.4, I've been able to trigger this occasionally: =============================== [ INFO: suspicious RCU usage. ] 4.5.0-rc7-think+ #3 Not tainted Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 1 RCU used illegally from extended quiescent state! no locks held by swapper/3/0. stack backtrace: CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.5.0-rc7-think+ #3 ffffffff92f821e0 1f3e5c340597d7fc ffff880468e07f10 ffffffff92560c2a ffff880462145280 0000000000000001 ffff880468e07f40 ffffffff921376a6 ffffffff93665ea0 0000cc7c876d28da 0000000000000005 ffffffff9383dd60 Call Trace: <IRQ> [<ffffffff92560c2a>] dump_stack+0x67/0x9d [<ffffffff921376a6>] lockdep_rcu_suspicious+0xe6/0x100 [<ffffffff925ae7a7>] do_trace_write_msr+0x127/0x1a0 [<ffffffff92061c83>] native_apic_msr_eoi_write+0x23/0x30 [<ffffffff92054408>] smp_trace_call_function_interrupt+0x38/0x360 [<ffffffff92d1ca60>] trace_call_function_interrupt+0x90/0xa0 <EOI> [<ffffffff92ac5124>] ? cpuidle_enter_state+0x1b4/0x520 Move the entering_irq() call before ack_APIC_irq(), because entering_irq() tells the RCU susbstems to end the extended quiescent state, so that the following trace call in ack_APIC_irq() works correctly. Suggested-by:
Andi Kleen <ak@linux.intel.com> Fixes: 4787c368 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()" Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Zhang Rui authored
[ Upstream commit 81ad4276 ] In some cases, platform thermal driver may report invalid trip points, thermal core should not take any action for these trip points. This fixed a regression that bogus trip point starts to screw up thermal control on some Lenovo laptops, after commit bb431ba2 Author: Zhang Rui <rui.zhang@intel.com> Date: Fri Oct 30 16:31:47 2015 +0800 Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by:
Manuel Krause <manuelkrause@netscape.net> Tested-by:
szegad <szegadlo@poczta.onet.pl> Tested-by:
prash <prash.n.rao@gmail.com> Tested-by:
amish <ammdispose-arch@yahoo.com> Tested-by:
Matthias <morpheusxyz123@yahoo.de> Reviewed-by:
Javi Merino <javi.merino@arm.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> CC: <stable@vger.kernel.org> #3.18+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190 Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 82be788c ] Looks like the fimware 8.2 still has the extra buttons spurious release bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321 Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Johannes Weiner authored
[ Upstream commit 588083bb ] When setting memory.high below usage, nothing happens until the next charge comes along, and then it will only reclaim its own charge and not the now potentially huge excess of the new memory.high. This can cause groups to stay in excess of their memory.high indefinitely. To fix that, when shrinking memory.high, kick off a reclaim cycle that goes after the delta. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Joshua Hunt authored
[ Upstream commit a1ee1932 ] While working on a script to restore all sysctl params before a series of tests I found that writing any value into the /proc/sys/kernel/{nmi_watchdog,soft_watchdog,watchdog,watchdog_thresh} causes them to call proc_watchdog_update(). NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. There doesn't appear to be a reason for doing this work every time a write occurs, so only do it when the values change. Signed-off-by:
Josh Hunt <johunt@akamai.com> Acked-by:
Don Zickus <dzickus@redhat.com> Reviewed-by:
Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: <stable@vger.kernel.org> [4.1.x+] Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit a0ad220c ] A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by:
-
Brent Taylor authored
[ Upstream commit 93c77d29 ] Using an at91sam9g20ek development board with DTS configuration may trigger a kernel panic because of a NULL pointer dereference exception, while configuring DMA. Let's fix this by adding a check for pdata before dereferencing it. Signed-off-by:
Brent Taylor <motobud@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Mans Rullgard authored
[ Upstream commit 74843787 ] Commit ecb89f2f ("mmc: atmel-mci: remove compat for non DT board when requesting dma chan") broke dma on AVR32 and any other boards not using DT. This restores a fallback mechanism for such cases. Signed-off-by:
Mans Rullgard <mans@mansr.com> Acked-by:
Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
-
Adrian Hunter authored
[ Upstream commit 99513624 ] Normally the timeout clock frequency is read from the capabilities register. It is also possible to set the value prior to calling sdhci_add_host() in which case that value will override the capabilities register value. However that was being done after calculating max_busy_timeout so that max_busy_timeout was being calculated using the wrong value of timeout_clk. Fix that by moving the override before max_busy_timeout is calculated. The result is that the max_busy_timeout and max_discard increase for BSW devices so that, for example, the time for mkfs.ext4 on a 64GB eMMC drops from about 1 minute 40 seconds to about 20 seconds. Note, in the future, the capabilities setting will be tidied up and this override won't be used anymore. However this fix is needed for stable. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit c29016cf ] iopl(3) is supposed to work if iopl is already 3, even if unprivileged. This didn't work right on Xen PV. Fix it. Reviewewd-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.orgSigned-off-by:
-
