- 03 Oct, 2020 8 commits
-
-
Jakub Kicinski authored
Attributes are already parsed based on the policy specified in the family and ready-to-use in info->attrs. No need to call genlmsg_parse() again. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
commit 3b0f31f2 ("genetlink: make policy common to family") had to work around removal of policy from ops by parsing in the pre_doit callback. Now that policy is back in full ops we can switch again. Set maxattr to actual size of the policies - both commands set GENL_DONT_VALIDATE_STRICT so out of range attributes will be silently ignored, anyway. v2: - remove stale comment Suggested-by:
-
Jakub Kicinski authored
Add policy to the struct genl_ops structure, this time with maxattr, so it can be used properly. Propagate .policy and .maxattr from the family in genl_get_cmd() if needed, this way the rest of the code does not have to worry if the policy is per op or global. Signed-off-by:
-
Jakub Kicinski authored
The structure of ctrl_dumppolicy() is clearly split into init and dumping. Move the init to a .start callback for clarity, it's a more idiomatic netlink dump code structure. Signed-off-by:
-
Jakub Kicinski authored
Whenever netlink dump uses more than 2 cb->args[] entries code gets hard to read. We're about to add more state to ctrl_dumppolicy() so create a structure. Since the structure is typed and clearly named we can remove the local fam_id variable and use ctx->fam_id directly. v3: - rebase onto explicit free fix v1: - s/nl_policy_dump/netlink_policy_dump_state/ - forward declare struct netlink_policy_dump_state, and move from passing unsigned long to actual pointer type - add build bug on - u16 fam_id - s/args/ctx/ Signed-off-by:
-
Jakub Kicinski authored
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by:
-
Jakub Kicinski authored
We want to add maxattr and policy back to genl_ops, to enable dumping per command policy to user space. This, however, would cause bloat for all the families with global policies. Introduce smaller version of ops (half the size of genl_ops). Translate these smaller ops into a full blown struct before use in the core. v1: - use struct assignment - put a full copy of the op in struct genl_dumpit_info - s/light/small/ Signed-off-by:
-
Jakub Kicinski authored
There are holes and oversized members in struct genl_family. Before: /* size: 104, cachelines: 2, members: 16 */ After: /* size: 88, cachelines: 2, members: 16 */ The command field in struct genlmsghdr is a u8, so no point in the operation count being 32 bit. Also operation 0 is usually undefined, so we only need 255 entries. netnsok and parallel_ops are only ever initialized to true. We can grow the fields as needed, compiler should warn us if someone tries to assign larger constants. Signed-off-by:
-
- 02 Oct, 2020 32 commits
-
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add devlink parser error drop trap support This patch set adds support in the dpaa2-eth driver for a new group of devlink drop traps - PARSER_ERROR_DROPS. The first patch adds a new generic trap group and associated traps, their definitions in devlink and their corresponding entries in the Documentation. Because there might be more devices (besides DPAA2) which do not support changing the action independently on each trap, a nre devlink callback is introduced - .trap_group_action_set(). If this callback is populated, it will take precedence over .trap_action_set() when the user requests changing the action on all the traps in a group. The next patches add basic linkage with devlink for the dpaa2-eth driver and support for the newly added PARSER_ERROR_DROPS. Nothing special here, just setting up the Rx error queue, interpreting the parse result, and then reporting any frame received on that queue to devlink. Changes in v2: - fix build error in 3/4 Changes in v3: - removed a commented line in 4/4 - added an extack in 4/4 - fixed up a warning on 32bit in 4/4 - reworded the trap_group_action_set() description in 2/4 ==================== Signed-off-by: -
Ioana Ciornei authored
Add support for the new group of devlink traps - PARSER_ERROR_DROPS. This consists of registering the array of parser error drops supported, controlling their action through the .trap_group_action_set() callback and reporting an erroneous skb received on the error queue appropriately. DPAA2 devices do not support controlling the action of independent parser error traps, thus the .trap_action_set() callback just returns an EOPNOTSUPP while .trap_group_action_set() actually notifies the hardware what it should do with a frame marked as having a header error. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Add basic support in dpaa2-eth for devlink. For the moment, just register the device with devlink, add the corresponding devlink port and implement the .info_get() callback. Signed-off-by:
-
Ioana Ciornei authored
Add a new devlink callback, .trap_group_action_set(), which can be used by device drivers which do not support controlling the action (drop, trap) on each trap but rather on the entire group trap. If this new callback is populated, it will take precedence over the .trap_action_set() callback when the user requests a change of all the traps in a group. Signed-off-by:
-
Ioana Ciornei authored
Add parser error drop packet traps, so that capable device driver could register them with devlink. The new packet trap group holds any drops of packets which were marked by the device as erroneous during header parsing. Add documentation for every added packet trap and packet trap group. Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic error recovery This set of patches comes mostly from error recovery path testing, as well as a couple of upstream review comments. ==================== Signed-off-by: -
Shannon Nelson authored
If the new firmware image downladed for update is corrupted or is a bad format, the download process will report a status code specifically for that. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Use the lif's ident information for the uc and mc filter counts rather than the ionic's version, to be sure we're getting the info that is specific to this lif. While we're thinking about it, add some missing error checking where we get the lif's identity information. Signed-off-by:
-
Shannon Nelson authored
After we do a fw upgrade and refill the ionic->ident.dev, we also need to update the other identity info. Since the lif identity needs to be updated each time the ionic identity is refreshed, we can pull it into ionic_identify(). The debugfs entry is moved so that it doesn't cause an error message when the data is refreshed after the fw upgrade. Signed-off-by:
-
Shannon Nelson authored
Some time ago we short-circuited the queue disables on a timeout error in order to not have to wait on every queue when we already know it will time out. However, this meant that we're not properly stopping all the interrupts and napi contexts. This changes queue disable to always call ionic_qcq_disable() and to give it an argument to know when to not do the adminq request. Signed-off-by:
-
Shannon Nelson authored
There are a couple of error recovery paths that can come through ionic_qcq_disable() without having set up the qcq, so we need to make sure we have a valid qcq pointer before using it. Signed-off-by:
-
Shannon Nelson authored
Clear our link check requested flag on an allocation error. We end up dropping this link check request, but that should be fine as our watchdog will come back a few seconds later and request it again. Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Shannon Nelson authored
Check through our work list for additional items. This normally will only have one item, but occasionally may have another job waiting. There really is no need reschedule ourself here. Reported-by:
-
Shannon Nelson authored
The event notification queue is set up a little differently in the NIC and so the notifyq q and cq descriptor structures need to be contiguous, which got missed in an earlier patch that separated out the q and cq descriptor allocations. That patch was aimed at making the big tx and rx descriptor queue allocations easier to manage - the notifyq is much smaller and doesn't need to be split. This patch simply adds an if/else and slightly different code for the notifyq descriptor allocation. Fixes: ea5a8b09 ("ionic: reduce contiguous memory allocation requirement") Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: =================== s390/net: updates 2020-10-01 Patches 1-3 enable qeth to also support the .set_channels() ethtool callback for OSA devices. This completes support for the full range of device types. The other patches are just the usual mix of cleanups. (Even one for ctcm!) =================== Signed-off-by: -
Vasily Gorbik authored
drivers/s390/net/ctcm_fsms.h: fsm_action_nop - only declaration left after commit 04885948 ("ctc: removal of the old ctc driver") drivers/s390/net/ctcm_mpc.h: ctcmpc_open - only declaration left after commit 293d984f ("ctcm: infrastructure for replaced ctc driver") Reviewed-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
- Add/delete some blanks, white spaces and braces. - Fix misindentations. - Adjust a deprecated header include, and htons() conversion. - Remove extra 'return' statements. Signed-off-by:
-
Julian Wiedmann authored
Replace our custom version of netdev_name(). Once we started to allocate the netdev at probe time with commit d3d1b205 ("s390/qeth: allocate netdevice early"), this stopped working as intended anyway. Signed-off-by:
-
Julian Wiedmann authored
The discipline struct is a fixed group of function pointers. So declare the L2 and L3 disciplines as constant. Signed-off-by:
-
Julian Wiedmann authored
For OSA devices that are _not_ configured in prio-queue mode, give users the option of selecting the number of active TX queues. This requires setting up the HW queues with a reasonable default QoS value in the QIB's PQUE parm area. As with the other device types, we bring up the device with a minimal number of TX queues for compatibility reasons. Signed-off-by:
-
Julian Wiedmann authored
Use a proper struct, and only program the QIB extensions for devices where they are supported. Signed-off-by:
-
Julian Wiedmann authored
When re-initializing a device, we can hit a situation where qeth_osa_set_output_queues() detects that it supports more or less HW TX queues than before. Right now we adjust dev->real_num_tx_queues from right there, but 1. it's getting more & more complicated to cover all cases, and 2. we can't re-enable the actually expected number of TX queues later because we lost the needed information. So keep track of the wanted TX queues (on initial setup, and whenever its changed via .set_channels), and later use that information when re-enabling the netdevice. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2020-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 Third set of patches for v5.10. Lots of iwlwifi patches this time, but also few patches ath11k and of course smaller changes to other drivers. Major changes: rtw88 * properly recover from firmware crashes on 8822c * dump firmware crash log iwlwifi * protected Target Wake Time (TWT) implementation * support disabling 5.8GHz channels via ACPI * support VHT extended NSS capability * enable Target Wake Time (TWT) by default ath11k * improvements to QCA6390 PCI support to make it more usable ==================== Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Offload tc-flower to mscc_ocelot switch using VCAP chains The purpose of this patch is to add more comprehensive support for flow offloading in the mscc_ocelot library and switch drivers. The design (with chains) is the result of this discussion: https://lkml.org/lkml/2020/6/2/203 I have tested it on Seville VSC9953 and Felix VSC9959, but it should also work on Ocelot-1 VSC7514. ==================== Signed-off-by:
-
Vladimir Oltean authored
Provide an example script which can be used as a skeleton for offloading TCAM rules in the Ocelot switches. Not all actions are demoed, mostly because of difficulty to automate this from a single board. For example, policing. We can set up an iperf3 UDP server and client and measure throughput at destination. But at least with DSA setups, network namespacing the individual ports is not possible because all switch ports are handled by the same DSA master. And we cannot assume that the target platform (an embedded board) has 2 other non-switch generator ports, we need to work with the generator ports as switch ports (this is the reason why mausezahn is used, and not IP traffic like ping). When somebody has an idea how to test policing, that can be added to this test. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Via the OCELOT_MASK_MODE_REDIRECT flag put in the IS2 action vector, it is possible to replace previous forwarding decisions with the port mask installed in this rule. I have studied Table 54 "MASK_MODE and PORT_MASK Combinations" from the VSC7514 documentation and it appears to behave sanely when this rule is installed in either lookup 0 or 1. Namely, a redirect in lookup 1 will overwrite the forwarding decision taken by any entry in lookup 0. Signed-off-by:
-
Vladimir Oltean authored
The issue which led to the introduction of this check was that MAC_ETYPE rules, such as filters on dst_mac and src_mac, would only match non-IP frames. There is a knob in VCAP_S2_CFG which forces all IP frames to be treated as non-IP, which is what we're currently doing if the user requested a dst_mac filter, in order to maintain sanity. But that knob is actually per IS2 lookup. And the good thing with exposing the lookups to the user via tc chains is that we're now able to offload MAC_ETYPE keys to one lookup, and IP keys to the other lookup. So let's do that. Signed-off-by:
-
Vladimir Oltean authored
We were installing TCAM rules with the LOOKUP field as unmasked, meaning that all entries were matching on all lookups. Now that lookups are exposed as individual chains, let's make the LOOKUP explicit when offloading TCAM entries. Signed-off-by:
-
Xiaoliang Yang authored
VCAP ES0 is an egress VCAP operating on all outgoing frames. This patch added ES0 driver to support vlan push action of tc filter. Usage: tc filter add dev swp1 egress protocol 802.1Q flower indev swp0 skip_sw \ vlan_id 1 vlan_prio 1 action vlan push id 2 priority 2 Signed-off-by:Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
-
Xiaoliang Yang authored
VCAP IS1 is a VCAP module which can filter on the most common L2/L3/L4 Ethernet keys, and modify the results of the basic QoS classification and VLAN classification based on those flow keys. There are 3 VCAP IS1 lookups, mapped over chains 10000, 11000 and 12000. Currently the driver is hardcoded to use IS1_ACTION_TYPE_NORMAL half keys. Note that the VLAN_MANGLE has been omitted for now. In hardware, the VCAP_IS1_ACT_VID_REPLACE_ENA field replaces the classified VLAN (metadata associated with the frame) and not the VLAN from the header itself. There are currently some issues which need to be addressed when operating in standalone, or in bridge with vlan_filtering=0 modes, because in those cases the switch ports have VLAN awareness disabled, and changing the classified VLAN to anything other than the pvid causes the packets to be dropped. Another issue is that on egress, we expect port tagging to push the classified VLAN, but port tagging is disabled in the modes mentioned above, so although the classified VLAN is replaced, it is not visible in the packet transmitted by the switch. Signed-off-by:
-
Vladimir Oltean authored
For Ocelot switches, there are 2 ingress pipelines for flow offload rules: VCAP IS1 (Ingress Classification) and IS2 (Security Enforcement). IS1 and IS2 support different sets of actions. The pipeline order for a packet on ingress is: Basic classification -> VCAP IS1 -> VCAP IS2 Furthermore, IS1 is looked up 3 times, and IS2 is looked up twice (each TCAM entry can be configured to match only on the first lookup, or only on the second, or on both etc). Because the TCAMs are completely independent in hardware, and because of the fixed pipeline, we actually have very limited options when it comes to offloading complex rules to them while still maintaining the same semantics with the software data path. This patch maps flow offload rules to ingress TCAMs according to a predefined chain index number. There is going to be a script in selftests that clarifies the usage model. There is also an egress TCAM (VCAP ES0, the Egress Rewriter), which is modeled on top of the default chain 0 of the egress qdisc, because it doesn't have multiple lookups. Suggested-by:
Allan W. Nielsen <allan.nielsen@microchip.com> Co-developed-by:
-
Vladimir Oltean authored
Since the mscc_ocelot_switch_lib is common between a pure switchdev and a DSA driver, the procedure of retrieving a net_device for a certain port index differs, as those are registered by their individual front-ends. Up to now that has been dealt with by always passing the port index to the switch library, but now, we're going to need to work with net_device pointers from the tc-flower offload, for things like indev, or mirred. It is not desirable to refactor that, so let's make sure that the flower offload core has the ability to translate between a net_device and a port index properly. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
