- 15 Jan, 2015 40 commits
-
-
Sreekanth Reddy authored
commit 2311ce4d upstream. This reverts commit 963ba22b ("mpt3sas: Remove phys on topology change") Reverting the previous mpt3sas drives patch changes, since we will observe below issue Issue: Drives connected Enclosure/Expander will unregister with SCSI Transport Layer, if any one remove and add expander cable with in DMD (Device Missing Delay) time period or even any one power-off and power-on the Enclosure with in the DMD period. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Sreekanth Reddy authored
commit 81a89c2d upstream. This reverts commit 3520f9c7 ("mpt2sas: Remove phys on topology change") Reverting the previous mpt2sas drives patch changes, since we will observe below issue Issue: Drives connected Enclosure/Expander will unregister with SCSI Transport Layer, if any one remove and add expander cable with in DMD (Device Missing Delay) time period or even any one power-off and power-on the Enclosure with in the DMD period. Signed-off-by:
-
Krzysztof Kozlowski authored
commit c31844ff upstream. During driver unbind the syscore ops were not unregistered which lead to double add on syscore list: $ echo "3810000.audss-clock-controller" > /sys/bus/platform/drivers/exynos-audss-clk/unbind $ echo "3810000.audss-clock-controller" > /sys/bus/platform/drivers/exynos-audss-clk/bind [ 1463.044061] ------------[ cut here ]------------ [ 1463.047255] WARNING: CPU: 0 PID: 1 at lib/list_debug.c:36 __list_add+0x8c/0xc0() [ 1463.054613] list_add double add: new=c06e52c0, prev=c06e52c0, next=c06d5f84. [ 1463.061625] Modules linked in: [ 1463.064623] CPU: 0 PID: 1 Comm: bash Tainted: G W 3.18.0-rc5-next-20141121-00005-ga8fab06eab42-dirty #1022 [ 1463.075338] [<c0014e2c>] (unwind_backtrace) from [<c0011d80>] (show_stack+0x10/0x14) [ 1463.083046] [<c0011d80>] (show_stack) from [<c048bb70>] (dump_stack+0x70/0xbc) [ 1463.090236] [<c048bb70>] (dump_stack) from [<c00233d4>] (warn_slowpath_common+0x74/0xb0) [ 1463.098295] [<c00233d4>] (warn_slowpath_common) from [<c00234a4>] (warn_slowpath_fmt+0x30/0x40) [ 1463.106962] [<c00234a4>] (warn_slowpath_fmt) from [<c020fe80>] (__list_add+0x8c/0xc0) [ 1463.114760] [<c020fe80>] (__list_add) from [<c0282094>] (register_syscore_ops+0x30/0x3c) [ 1463.122819] [<c0282094>] (register_syscore_ops) from [<c0392f20>] (exynos_audss_clk_probe+0x36c/0x460) [ 1463.132091] [<c0392f20>] (exynos_audss_clk_probe) from [<c0283084>] (platform_drv_probe+0x48/0xa4) [ 1463.141013] [<c0283084>] (platform_drv_probe) from [<c0281a14>] (driver_probe_device+0x13c/0x37c) [ 1463.149852] [<c0281a14>] (driver_probe_device) from [<c0280560>] (bind_store+0x90/0xe0) [ 1463.157822] [<c0280560>] (bind_store) from [<c027fd10>] (drv_attr_store+0x20/0x2c) [ 1463.165363] [<c027fd10>] (drv_attr_store) from [<c0143898>] (sysfs_kf_write+0x4c/0x50) [ 1463.173252] [<c0143898>] (sysfs_kf_write) from [<c0142c80>] (kernfs_fop_write+0xbc/0x198) [ 1463.181395] [<c0142c80>] (kernfs_fop_write) from [<c00e2be0>] (vfs_write+0xa0/0x1a8) [ 1463.189104] [<c00e2be0>] (vfs_write) from [<c00e2f00>] (SyS_write+0x40/0x8c) [ 1463.196122] [<c00e2f00>] (SyS_write) from [<c000f2a0>] (ret_fast_syscall+0x0/0x48) [ 1463.203655] ---[ end trace 08f6710c9bc8d8f3 ]--- [ 1463.208244] exynos-audss-clk 3810000.audss-clock-controller: setup completed Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 1241ef94 ("clk: samsung: register audio subsystem clocks using common clock framework") Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hannes Reinecke authored
commit 506787a2 upstream. tcm_loop has the I_T nexus associated with the HBA. This causes commands to become misdirected if the HBA has more than one target portal group; any command is then being sent to the first target portal group instead of the correct one. The nexus needs to be associated with the target portal group instead. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Michael Halcrow authored
commit 94208064 upstream. Dmitry Chernenkov used KASAN to discover that eCryptfs writes past the end of the allocated buffer during encrypted filename decoding. This fix corrects the issue by getting rid of the unnecessary 0 write when the current bit offset is 2. Signed-off-by:
Michael Halcrow <mhalcrow@google.com> Reported-by:
Dmitry Chernenkov <dmitryc@google.com> Suggested-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Tyler Hicks authored
commit 332b122d upstream. The ecryptfs_encrypted_view mount option greatly changes the functionality of an eCryptfs mount. Instead of encrypting and decrypting lower files, it provides a unified view of the encrypted files in the lower filesystem. The presence of the ecryptfs_encrypted_view mount option is intended to force a read-only mount and modifying files is not supported when the feature is in use. See the following commit for more information: e77a56dd [PATCH] eCryptfs: Encrypted passthrough This patch forces the mount to be read-only when the ecryptfs_encrypted_view mount option is specified by setting the MS_RDONLY flag on the superblock. Additionally, this patch removes some broken logic in ecryptfs_open() that attempted to prevent modifications of files when the encrypted view feature was in use. The check in ecryptfs_open() was not sufficient to prevent file modifications using system calls that do not operate on a file descriptor. Signed-off-by:
Priya Bansal <p.bansal@samsung.com> Signed-off-by:
-
Uwe Kleine-König authored
commit ab1e8537 upstream. Commit a095b1c7 ("ARM: mvebu: sort DT nodes by address") missed placing the system-controller in the correct order. Fixes: a095b1c7 ("ARM: mvebu: sort DT nodes by address") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/20141114204333.GS27002@pengutronix.deSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Mikulas Patocka authored
commit 17181fb7 upstream. As long as struct thin_c is in the list, anyone can grab a reference of it. Consequently, we must wait for the reference count to drop to zero *after* we remove the structure from the list, not before. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit c1c6156f upstream. This function isn't right and it causes a static checker warning: drivers/md/dm-thin.c:3016 maybe_resize_data_dev() error: potentially using uninitialized 'sb_data_size'. It should set "*count" and return zero on success the same as the sm_metadata_get_nr_blocks() function does earlier. Fixes: 3241b1d3 ('dm: add persistent data library') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Peter Guo authored
commit 6380ea09 upstream. Fix Dell E5440 when reboot Linux, can't find o2micro sd host chip issue. Fixes: 01acf691 (mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts) Signed-off-by:
Peter Guo <peter.guo@bayhubtech.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ulf Hansson authored
commit 903101a8 upstream. The commit, mmc: omap: clarify DDR timing mode between SD-UHS and eMMC, switched omap_hsmmc to support MMC DDR mode instead of UHS DDR50 mode. Add UHS DDR50 mode again and this time let's also keep the MMC DDR mode. Fixes: 5438ad95 (mmc: omap: clarify DDR timing mode between SD-UHS and eMMC) Reported-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Baruch Siach authored
commit 0031a98a upstream. Make force_ro consistent with other sysfs entries. Fixes: 371a689f ('mmc: MMC boot partitions support') Cc: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
NeilBrown authored
commit 4b5060dd upstream. If two threads call bitmap_unplug at the same time, then one might schedule all the writes, and the other might decide that it doesn't need to wait. But really it does. It rarely hurts to wait when it isn't absolutely necessary, and the current code doesn't really focus on 'absolutely necessary' anyway. So just wait always. This can potentially lead to data corruption if a crash happens at an awkward time and data was written before the bitmap was updated. It is very unlikely, but this should go to -stable just to be safe. Appropriate for any -stable. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Junxiao Bi authored
commit 136f49b9 upstream. For buffer write, page lock will be got in write_begin and released in write_end, in ocfs2_write_end_nolock(), before it unlock the page in ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask for the read lock of journal->j_trans_barrier. Holding page lock and ask for journal->j_trans_barrier breaks the locking order. This will cause a deadlock with journal commit threads, ocfs2cmt will get write lock of journal->j_trans_barrier first, then it wakes up kjournald2 to do the commit work, at last it waits until done. To commit journal, kjournald2 needs flushing data first, it needs get the cache page lock. Since some ocfs2 cluster locks are holding by write process, this deadlock may hung the whole cluster. unlock pages before ocfs2_run_deallocs() can fix the locking order, also put unlock before ocfs2_commit_trans() to make page lock is unlocked before j_trans_barrier to preserve unlocking order. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
commit c297abfd upstream. While reviewing the code of umount_tree I realized that when we append to a preexisting unmounted list we do not change pprev of the former first item in the list. Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on the former first item of the list will stomp unmounted.first leaving it set to some random mount point which we are likely to free soon. This isn't likely to hit, but if it does I don't know how anyone could track it down. [ This happened because we don't have all the same operations for hlist's as we do for normal doubly-linked lists. In particular, list_splice() is easy on our standard doubly-linked lists, while hlist_splice() doesn't exist and needs both start/end entries of the hlist. And commit 38129a13 incorrectly open-coded that missing hlist_splice(). We should think about making these kinds of "mindless" conversions easier to get right by adding the missing hlist helpers - Linus ] Fixes: 38129a13 switch mnt_hash to hlist Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Dan Carpenter authored
commit 021b77be upstream. Probably this code was syncing a lot more often then intended because the do_sync variable wasn't set to zero. Fixes: c62988ec ('ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.') Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Signed-off-by:
-
Johannes Berg authored
commit 28a9bc68 upstream. When writing the code to allow per-station GTKs, I neglected to take into account the management frame keys (index 4 and 5) when freeing the station and only added code to free the first four data frame keys. Fix this by iterating the array of keys over the right length. Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jan Kara authored
commit f54e18f1 upstream. Rock Ridge extensions define so called Continuation Entries (CE) which define where is further space with Rock Ridge data. Corrupted isofs image can contain arbitrarily long chain of these, including a one containing loop and thus causing kernel to end in an infinite loop when traversing these entries. Limit the traversal to 32 entries which should be more than enough space to store all the Rock Ridge data. Reported-by:
P J P <ppandit@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vineet Gupta authored
commit e8ef060b upstream. This allows the sdplite/Zebu images to run on OSCI simulation platform Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Andy Lutomirski authored
commit 0e58af4e upstream. Users have no business installing custom code segments into the GDT, and segments that are not present but are otherwise valid are a historical source of interesting attacks. For completeness, block attempts to set the L bit. (Prior to this patch, the L bit would have been silently dropped.) This is an ABI break. I've checked glibc, musl, and Wine, and none of them look like they'll have any trouble. Note to stable maintainers: this is a hardening patch that fixes no known bugs. Given the possibility of ABI issues, this probably shouldn't be backported quickly. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: security@kernel.org <security@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 41bdc785 upstream. Installing a 16-bit RW data segment into the GDT defeats espfix. AFAICT this will not affect glibc, Wine, or dosemu at all. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit aee4e5f3 upstream. When recording the state of a task for the sched_switch tracepoint a check of task_preempt_count() is performed to see if PREEMPT_ACTIVE is set. This is because, technically, a task being preempted is really in the TASK_RUNNING state, and that is what should be recorded when tracing a sched_switch, even if the task put itself into another state (it hasn't scheduled out in that state yet). But with the change to use per_cpu preempt counts, the task_thread_info(p)->preempt_count is no longer used, and instead task_preempt_count(p) is used. The problem is that this does not use the current preempt count but a stale one from a previous sched_switch. The task_preempt_count(p) uses saved_preempt_count and not preempt_count(). But for tracing sched_switch, if p is current, we really want preempt_count(). I hit this bug when I was tracing sleep and the call from do_nanosleep() scheduled out in the "RUNNING" state. sleep-4290 [000] 537272.259992: sched_switch: sleep:4290 [120] R ==> swapper/0:0 [120] sleep-4290 [000] 537272.260015: kernel_stack: <stack trace> => __schedule (ffffffff8150864a) => schedule (ffffffff815089f8) => do_nanosleep (ffffffff8150b76c) => hrtimer_nanosleep (ffffffff8108d66b) => SyS_nanosleep (ffffffff8108d750) => return_to_handler (ffffffff8150e8e5) => tracesys_phase2 (ffffffff8150c844) After a bit of hair pulling, I found that the state was really TASK_INTERRUPTIBLE, but the saved_preempt_count had an old PREEMPT_ACTIVE set and caused the sched_switch tracepoint to show it as RUNNING. Link: http://lkml.kernel.org/r/20141210174428.3cb7542a@gandalf.local.homeAcked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Brian Norris authored
commit 68f29815 upstream. The torture test should quit once it actually induces an error in the flash. This step was accidentally removed during refactoring. Without this fix, the torturetest just continues infinitely, or until the maximum cycle count is reached. e.g.: ... [ 7619.218171] mtd_test: error -5 while erasing EB 100 [ 7619.297981] mtd_test: error -5 while erasing EB 100 [ 7619.377953] mtd_test: error -5 while erasing EB 100 [ 7619.457998] mtd_test: error -5 while erasing EB 100 [ 7619.537990] mtd_test: error -5 while erasing EB 100 ... Fixes: 6cf78358 ("mtd: mtd_torturetest: use mtd_test helpers") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Jiri Slaby authored
commit fa0c5540 upstream. When resirefs is trying to mount a partition, it creates a commit workqueue (sbi->commit_wq). But when mount fails later, the workqueue is not freed. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by: auxsvr@gmail.com Reported-by:
Benoît Monin <benoit.monin@gmx.fr> Cc: Jan Kara <jack@suse.cz> Cc: reiserfs-devel@vger.kernel.org Fixes: 797d9016Signed-off-by:
-
Emmanuel Grumbach authored
commit 70dcec5a upstream. This can happen and there is no point in added more detection code lower in the stack. Catching these in one single point (cfg80211) is enough. Stop WARNING about this case. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=89001 Fixes: 2f1c6c57 ("cfg80211: process non country IE conflicting first") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit f89f46cf upstream. If the userspace passes a malformed sched scan request (or a net detect wowlan configuration) by adding a NL80211_ATTR_SCHED_SCAN_MATCH attribute without any nested matchsets, a NULL pointer dereference will occur. Fix this by checking that we do have matchsets in our array before trying to access it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 IP: [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] PGD 865c067 PUD 865b067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [last unloaded: compat] CPU: 2 PID: 2442 Comm: iw Tainted: G O 3.17.2 #31 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880013800790 ti: ffff880008d80000 task.ti: ffff880008d80000 RIP: 0010:[<ffffffffa002fd69>] [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] RSP: 0018:ffff880008d838d0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000143c RSI: 0000000000000000 RDI: ffff880008ee8dd0 RBP: ffff880008d83948 R08: 0000000000000002 R09: 0000000000000019 R10: ffff88001d1b3c40 R11: 0000000000000002 R12: ffff880019e85e00 R13: 00000000fffffed4 R14: ffff880009757800 R15: 0000000000001388 FS: 00007fa3b6d13700(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 0000000008670000 CR4: 00000000000006e0 Stack: ffff880009757800 ffff880000000001 0000000000000000 ffff880008ee84e0 0000000000000000 ffff880009757800 00000000fffffed4 ffff880008d83948 ffffffff814689c9 ffff880009757800 ffff880008ee8000 0000000000000000 Call Trace: [<ffffffff814689c9>] ? nla_parse+0xb9/0x120 [<ffffffffa00306de>] nl80211_set_wowlan+0x75e/0x960 [cfg80211] [<ffffffff810bf3d5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8161a77b>] genl_family_rcv_msg+0x18b/0x360 [<ffffffff810bf66d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8161a9d4>] genl_rcv_msg+0x84/0xc0 [<ffffffff8161a950>] ? genl_family_rcv_msg+0x360/0x360 [<ffffffff81618e79>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81619458>] genl_rcv+0x28/0x40 [<ffffffff816184a5>] netlink_unicast+0x105/0x180 [<ffffffff8161886f>] netlink_sendmsg+0x34f/0x7a0 [<ffffffff8105a097>] ? kvm_clock_read+0x27/0x40 [<ffffffff815c644d>] sock_sendmsg+0x8d/0xc0 [<ffffffff811a75c9>] ? might_fault+0xb9/0xc0 [<ffffffff811a756e>] ? might_fault+0x5e/0xc0 [<ffffffff815d5d26>] ? verify_iovec+0x56/0xe0 [<ffffffff815c73e0>] ___sys_sendmsg+0x3d0/0x3e0 [<ffffffff810a7be8>] ? sched_clock_cpu+0x98/0xd0 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff810bb39f>] ? up_read+0x1f/0x40 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff812146ed>] ? __fget_light+0x13d/0x160 [<ffffffff815c7b02>] __sys_sendmsg+0x42/0x80 [<ffffffff815c7b52>] SyS_sendmsg+0x12/0x20 [<ffffffff81751f69>] system_call_fastpath+0x16/0x1b Fixes: ea73cbce ("nl80211: fix scheduled scan RSSI matchset attribute confusion") Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Arik Nemtsov authored
commit 34f05f54 upstream. In the already-set and intersect case of a driver-hint, the previous wiphy regdomain was not freed before being reset with a copy of the cfg80211 regdomain. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Jouni Malinen authored
commit 08f6f147 upstream. The VHT supported channel width field is a two bit integer, not a bitfield. cfg80211_chandef_usable() was interpreting it incorrectly and ended up rejecting 160 MHz channel width if the driver indicated support for both 160 and 80+80 MHz channels. Fixes: 3d9d1d66 ("nl80211/cfg80211: support VHT channel configuration") (however, no real drivers had 160 MHz support it until 3.16) Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Andreas Müller authored
commit d025933e upstream. As multicast-frames can't be fragmented, "dot11MulticastReceivedFrameCount" stopped being incremented after the use-after-free fix. Furthermore, the RX-LED will be triggered by every multicast frame (which wouldn't happen before) which wouldn't allow the LED to rest at all. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=89431 which also had the patch. Fixes: b8fff407 ("mac80211: fix use-after-free in defragmentation") Signed-off-by:
Andreas Müller <goo@stapelspeicher.org> [rewrite commit message] Signed-off-by:
-
Gwendal Grignou authored
commit d1c7e29e upstream. Before ->start() is called, bufsize size is set to HID_MIN_BUFFER_SIZE, 64 bytes. While processing the IRQ, we were asking to receive up to wMaxInputLength bytes, which can be bigger than 64 bytes. Later, when ->start is run, a proper bufsize will be calculated. Given wMaxInputLength is said to be unreliable in other part of the code, set to receive only what we can even if it results in truncated reports. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Eric W. Biederman authored
commit db86da7c upstream. A security fix in caused the way the unprivileged remount tests were using user namespaces to break. Tweak the way user namespaces are being used so the test works again. Signed-off-by:
-
Eric W. Biederman authored
commit 66d2f338 upstream. Now that setgroups can be disabled and not reenabled, setting gid_map without privielge can now be enabled when setgroups is disabled. This restores most of the functionality that was lost when unprivileged setting of gid_map was removed. Applications that use this functionality will need to check to see if they use setgroups or init_groups, and if they don't they can be fixed by simply disabling setgroups before writing to gid_map. Reviewed-by:
-
Eric W. Biederman authored
commit 9cc46516 upstream. - Expose the knob to user space through a proc file /proc/<pid>/setgroups A value of "deny" means the setgroups system call is disabled in the current processes user namespace and can not be enabled in the future in this user namespace. A value of "allow" means the segtoups system call is enabled. - Descendant user namespaces inherit the value of setgroups from their parents. - A proc file is used (instead of a sysctl) as sysctls currently do not allow checking the permissions at open time. - Writing to the proc file is restricted to before the gid_map for the user namespace is set. This ensures that disabling setgroups at a user namespace level will never remove the ability to call setgroups from a process that already has that ability. A process may opt in to the setgroups disable for itself by creating, entering and configuring a user namespace or by calling setns on an existing user namespace with setgroups disabled. Processes without privileges already can not call setgroups so this is a noop. Prodcess with privilege become processes without privilege when entering a user namespace and as with any other path to dropping privilege they would not have the ability to call setgroups. So this remains within the bounds of what is possible without a knob to disable setgroups permanently in a user namespace. Signed-off-by:
-
Tony Lindgren authored
commit 027bc8b0 upstream. On some ARMs the memory can be mapped pgprot_noncached() and still be working for atomic operations. As pointed out by Colin Cross <ccross@android.com>, in some cases you do want to use pgprot_noncached() if the SoC supports it to see a debug printk just before a write hanging the system. On ARMs, the atomic operations on strongly ordered memory are implementation defined. So let's provide an optional kernel parameter for configuring pgprot_noncached(), and use pgprot_writecombine() by default. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Rob Herring authored
commit 7ae9cb81 upstream. Currently trying to use pstore on at least ARMs can hang as we're mapping the peristent RAM with pgprot_noncached(). On ARMs, pgprot_noncached() will actually make the memory strongly ordered, and as the atomic operations pstore uses are implementation defined for strongly ordered memory, they may not work. So basically atomic operations have undefined behavior on ARM for device or strongly ordered memory types. Let's fix the issue by using write-combine variants for mappings. This corresponds to normal, non-cacheable memory on ARM. For many other architectures, this change does not change the mapping type as by default we have: #define pgprot_writecombine pgprot_noncached The reason why pgprot_noncached() was originaly used for pstore is because Colin Cross <ccross@android.com> had observed lost debug prints right before a device hanging write operation on some systems. For the platforms supporting pgprot_noncached(), we can add a an optional configuration option to support that. But let's get pstore working first before adding new features. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: linux-kernel@vger.kernel.org Acked-by:
Rob Herring <rob.herring@calxeda.com> [tony@atomide.com: updated description] Signed-off-by:
-
Jesse Barnes authored
commit 9f49c376 upstream. Should probably just init this in the GMbus code all the time, based on the cdclk and HPLL like we do on newer platforms. Ville has code for that in a rework branch, but until then we can fix this bug fairly easily. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76301Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Nikolay <mar.kolya@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Nadav Amit authored
commit ab646f54 upstream. commit d50eaa18 ("KVM: x86: Perform limit checks when assigning EIP") mistakenly used zero as cpl on em_ret_far. Use the actual one. Fixes: d50eaa18Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Bandan Das authored
commit 78051e3b upstream. If L0 has disabled EPT, don't advertise unrestricted mode at all since it depends on EPT to run real mode code. Fixes: 92fbc7b1Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit f647d7c1 upstream. Otherwise, if buggy user code points DS or ES into the TLS array, they would be corrupted after a context switch. This also significantly improves the comments and documents some gotchas in the code. Before this patch, the both tests below failed. With this patch, the es test passes, although the gsbase test still fails. ----- begin es test ----- /* * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned short GDT3(int idx) { return (idx << 3) | 3; } static int create_tls(int idx, unsigned int base) { struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; if (syscall(SYS_set_thread_area, &desc) != 0) err(1, "set_thread_area"); return desc.entry_number; } int main() { int idx = create_tls(-1, 0); printf("Allocated GDT index %d\n", idx); unsigned short orig_es; asm volatile ("mov %%es,%0" : "=rm" (orig_es)); int errors = 0; int total = 1000; for (int i = 0; i < total; i++) { asm volatile ("mov %0,%%es" : : "rm" (GDT3(idx))); usleep(100); unsigned short es; asm volatile ("mov %%es,%0" : "=rm" (es)); asm volatile ("mov %0,%%es" : : "rm" (orig_es)); if (es != GDT3(idx)) { if (errors == 0) printf("[FAIL]\tES changed from 0x%hx to 0x%hx\n", GDT3(idx), es); errors++; } } if (errors) { printf("[FAIL]\tES was corrupted %d/%d times\n", errors, total); return 1; } else { printf("[OK]\tES was preserved\n"); return 0; } } ----- end es test ----- ----- begin gsbase test ----- /* * gsbase.c, a gsbase test * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned char *testptr, *testptr2; static unsigned char read_gs_testvals(void) { unsigned char ret; asm volatile ("movb %%gs:%1, %0" : "=r" (ret) : "m" (*testptr)); return ret; } int main() { int errors = 0; testptr = mmap((void *)0x200000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr == MAP_FAILED) err(1, "mmap"); testptr2 = mmap((void *)0x300000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr2 == MAP_FAILED) err(1, "mmap"); *testptr = 0; *testptr2 = 1; if (syscall(SYS_arch_prctl, ARCH_SET_GS, (unsigned long)testptr2 - (unsigned long)testptr) != 0) err(1, "ARCH_SET_GS"); usleep(100); if (read_gs_testvals() == 1) { printf("[OK]\tARCH_SET_GS worked\n"); } else { printf("[FAIL]\tARCH_SET_GS failed\n"); errors++; } asm volatile ("mov %0,%%gs" : : "r" (0)); if (read_gs_testvals() == 0) { printf("[OK]\tWriting 0 to gs worked\n"); } else { printf("[FAIL]\tWriting 0 to gs failed\n"); errors++; } usleep(100); if (read_gs_testvals() == 0) { printf("[OK]\tgsbase is still zero\n"); } else { printf("[FAIL]\tgsbase was corrupted\n"); errors++; } return errors == 0 ? 0 : 1; } ----- end gsbase test ----- Signed-off-by:
-
Oleg Nesterov authored
commit 24c037eb upstream. alloc_pid() does get_pid_ns() beforehand but forgets to put_pid_ns() if it fails because disable_pid_allocation() was called by the exiting child_reaper. We could simply move get_pid_ns() down to successful return, but this fix tries to be as trivial as possible. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
-
