- 06 Apr, 2018 16 commits
-
-
Steven Rostedt (VMware) authored
A boot up test function update_pred_fn() dereferences filter->prog without the proper rcu annotation. To do this, we must also take the event_mutex first. Normally, this isn't needed because this test function can not race with other use cases that touch the event filters (it is disabled if any events are enabled). Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
ftrace_function_set_filter() referenences filter->prog without annotation and sparse complains about it. It needs a rcu_dereference_protected() wrapper. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Chris Wilson authored
In commit 932066a15335 ("tracing: Default to using trace_global_clock if sched_clock is unstable"), the logic for deciding to override the default clock if unstable was reversed from the earlier posting. I was trying to reduce the width of the message by using an early return rather than a if-block, but reverted back to using the if-block and accidentally left the predicate inverted. Link: http://lkml.kernel.org/r/20180404212450.26646-1-chris@chris-wilson.co.uk Fixes: 932066a15335 ("tracing: Default to using trace_global_clock if sched_clock is unstable") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Function tracing can trace in NMIs and such. If the TSC is determined to be unstable, the tracing clock will switch to the global clock on boot up, unless "trace_clock" is specified on the kernel command line. The global clock disables interrupts to access sched_clock_cpu(), and in doing so can be done within lockdep internals (because of function tracing and NMIs). This can trigger false lockdep splats. The trace_clock_global() is special, best not to trace the irq logic within it. Link: http://lkml.kernel.org/r/20180404145015.77bde42d@gandalf.local.homeSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
As si_mem_available() can say there is enough memory even though the memory available is not useable by the ring buffer, it is best to not kill innocent applications because the ring buffer is taking up all the memory while it is trying to allocate a great deal of memory. If the allocator is user space (because kernel threads can also increase the size of the kernel ring buffer on boot up), then after si_mem_available() says there is enough memory, set the OOM killer to kill the current task if an OOM triggers during the allocation. Link: http://lkml.kernel.org/r/20180404062340.GD6312@dhcp22.suse.czSuggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The ring buffer is made up of a link list of pages. When making the ring buffer bigger, it will allocate all the pages it needs before adding to the ring buffer, and if it fails, it frees them and returns an error. This makes increasing the ring buffer size an all or nothing action. When this was first created, the pages were allocated with "NORETRY". This was to not cause any Out-Of-Memory (OOM) actions from allocating the ring buffer. But NORETRY was too strict, as the ring buffer would fail to expand even when there's memory available, but was taken up in the page cache. Commit 84861885 ("tracing/ring_buffer: Try harder to allocate") changed the allocating from NORETRY to RETRY_MAYFAIL. The RETRY_MAYFAIL would allocate from the page cache, but if there was no memory available, it would simple fail the allocation and not trigger an OOM. This worked fine, but had one problem. As the ring buffer would allocate one page at a time, it could take up all memory in the system before it failed to allocate and free that memory. If the allocation is happening and the ring buffer allocates all memory and then tries to take more than available, its allocation will not trigger an OOM, but if there's any allocation that happens someplace else, that could trigger an OOM, even though once the ring buffer's allocation fails, it would free up all the previous memory it tried to allocate, and allow other memory allocations to succeed. Commit d02bd27b ("mm/page_alloc.c: calculate 'available' memory in a separate function") separated out si_mem_availble() as a separate function that could be used to see how much memory is available in the system. Using this function to make sure that the ring buffer could be allocated before it tries to allocate pages we can avoid allocating all memory in the system and making it vulnerable to OOMs if other allocations are taking place. Link: http://lkml.kernel.org/r/1522320104-6573-1-git-send-email-zhaoyang.huang@spreadtrum.com CC: stable@vger.kernel.org Cc: linux-mm@kvack.org Fixes: 84861885 ("tracing/ring_buffer: Try harder to allocate") Requires: d02bd27b ("mm/page_alloc.c: calculate 'available' memory in a separate function") Reported-by: Zhaoyang Huang <huangzhaoyang@gmail.com> Tested-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Running a test on a x86_32 kernel I triggered a bug that an interrupt disable/enable isn't being catched by lockdep. At least knowing where the last one was found would be helpful, but the warnings that are produced do not show this information. Even without debugging lockdep, having the WARN() display the last place hard and soft irqs were enabled or disabled is valuable. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Commit 841a915d ("printf: Do not have bprintf dereference pointers") would preprocess various pointers that are dereferenced in the bprintf() because the recording and printing are done at two different times. Some pointers stayed dereferenced in the ring buffer because user space could handle them (namely "%pS" and friends). Pointers that are not dereferenced should not be processed immediately but instead just saved directly. Cc: stable@vger.kernel.org Fixes: 841a915d ("printf: Do not have bprintf dereference pointers") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Dan Carpenter authored
Smatch complains that idx can be used uninitialized when we check if (idx < 0). It has to be the first iteration through the loop and the HIST_FIELD_FL_STACKTRACE bit has to be clear and the HIST_FIELD_FL_VAR bit has to be set to reach the bug. Link: http://lkml.kernel.org/r/20180328114815.GC29050@mwanda Fixes: 30350d65 ("tracing: Add variable support to hist triggers") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
The strncpy() currently being used for variable string fields can result in a lack of termination if the string length is equal to the field size. Use the safer strscpy() instead, which will guarantee termination. Link: http://lkml.kernel.org/r/fb97c1e518fb358c12a4057d7445ba2c46956cd7.1522256721.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Actions also need to be considered when checking for matching triggers - triggers differing only by action should be allowed, but currently aren't because the matching check ignores the action and erroneously returns -EEXIST. Add and call an actions_match() function to address that. Here's an example using onmatch() actions. The first -EEXIST shouldn't occur because the onmatch() is different in the second wakeup_latency() param. The second -EEXIST shouldn't occur because it's a different action (in this case, it doesn't have an action, so shouldn't be seen as being the same and therefore rejected). In the after case, both are correctly accepted (and trying to add one of them again returns -EEXIST as it should). before: # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger -su: echo: write error: File exists # echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger -su: echo: write error: File exists after: # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger Link: http://lkml.kernel.org/r/a7fd668b87ec10736c8f016ac4279c8480d50c2b.1522256721.git.tom.zanussi@linux.intel.comTested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Variable references should never have flags appended when displayed - prevent that from happening. Before: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:... After: hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:... Link: http://lkml.kernel.org/r/913318a5610ef6b24af2522575f671fa6ee19b6b.1522256721.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
When displaying hist triggers, variable references that have the timestamp field flag set are erroneously displayed as common_timestamp rather than the variable reference. Additionally, timestamp expressions are displayed in the same way. Fix this by forcing the timestamp flag handling to follow variable reference and expression handling. Before: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs:... After: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:... Link: http://lkml.kernel.org/r/92746b06be67499c2a6217bd55395b350ad18fad.1522256721.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Salvatore Mesoraca authored
Avoid a VLA by using a real constant expression instead of a variable. The compiler should be able to optimize the original code and avoid using an actual VLA. Anyway this change is useful because it will avoid a false positive with -Wvla, it might also help the compiler generating better code. Link: http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Link: http://lkml.kernel.org/r/1522399988-8815-1-git-send-email-s.mesoraca16@gmail.comSigned-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Chris Wilson authored
Mention the alternative of adding trace_clock=global to the kernel command line when we detect that we've used an unstable clock across a suspend/resume cycle. Link: http://lkml.kernel.org/r/20180330150132.16903-2-chris@chris-wilson.co.ukSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Chris Wilson authored
Across suspend, we may see a very large drift in timestamps if the sched clock is unstable, prompting the global trace's ringbuffer code to warn and suggest switching to the global clock. Preempt this request by detecting when the sched clock is unstable (determined during late_initcall) and automatically switching the default clock over to trace_global_clock. This should prevent requiring user interaction to resolve warnings such as: Delta way too big! 18446743856563626466 ts=18446744054496180323 write stamp = 197932553857 If you just came from a suspend/resume, please switch to the trace global clock: echo global > /sys/kernel/debug/tracing/trace_clock Link: http://lkml.kernel.org/r/20180330150132.16903-1-chris@chris-wilson.co.ukSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 23 Mar, 2018 2 commits
-
-
Steven Rostedt (VMware) authored
The early_initcall() functions get assigned to __initcall_start[]. These are called by do_pre_smp_initcalls(). The initcall_levels[] array starts with __initcall0_start[], and initcall_levels[] are to match the initcall_level_names[] array. The first name in that array is "early", but that is not correct. As pure_initcall() functions get assigned to __initcall0_start[] array. Change the first name in initcall_level_names[] array to "pure". Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Dan Carpenter authored
We forgot to set the error code on this path so we return ERR_PTR(0) which is NULL. It results in a NULL dereference in the caller. Link: http://lkml.kernel.org/r/20180323113735.GC28518@mwanda Fixes: 100719dc ("tracing: Add simple expression support to hist triggers") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 14 Mar, 2018 3 commits
-
-
Steven Rostedt (VMware) authored
Al Viro reviewed the filter logic of ftrace trace events and found it to be very troubling. It creates a binary tree based on the logic operators and walks it during tracing. He sent myself and Tom Zanussi a long explanation (and formal proof) of how to do the string parsing better and end up with a program array that can be simply iterated to come up with the correct results. I took his ideas and his pseudo code and rewrote the filter logic based on them. In doing so, I was able to remove a lot of code, and have a much more condensed filter logic in the process. I wrote a very long comment describing the methadology that Al proposed in my own words. For more info on how this works, read the comment above predicate_parse(). Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The pred_funcs_##type arrays consist of five functions that are assigned based on the ops. The array must be in the same order of the ops each function represents. The PRED_FUNC_START macro denotes the op enum that starts the op that maps to the pred_funcs_##type arrays. This is all very subtle and prone to bugs if the code is changed. Add comments describing how PRED_FUNC_START and pred_funcs_##type array is used, and also a PRED_FUNC_MAX that is the maximum number of functions in the arrays. Clean up select_comparison_fn() that assigns the predicates to the pred_funcs_##type array function as well as add protection in case an op is passed in that does not map correctly to the array. Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Instead of having a separate enum that is the index into another array, like a string array, make a single macro that combines them into a single list, and then the two can not get out of sync. This makes it easier to add and remove items. The macro trick is: #define DOGS \ C( JACK, "Jack Russell") \ C( ITALIAN, "Italian Greyhound") \ C( GERMAN, "German Shepherd") #undef C #define C(a, b) a enum { DOGS }; #undef C #define C(a, b) b static char dogs[] = { DOGS }; Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 10 Mar, 2018 19 commits
-
-
Steven Rostedt (VMware) authored
The replace_filter_string() frees the current string and then copies a given string. But in the two locations that it was used, the allocation happened right after the filter was allocated (nothing to replace). There's no need for this to be a helper function. Embedding the allocation in the two places where it was called will make changing the code in the future easier. Also make the variable consistent (always use "filter_string" as the name, as it was used in one instance as "filter_str") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
replace_system_preds() creates a filter list to free even when it doesn't really need to have it. Only save filters that require synchronize_sched() in the filter list to free. This will allow the code to be updated a bit easier in the future. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The __alloc_filter() function does nothing more that allocate the filter. There's no reason to have it as a helper function. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The filter code does open code string appending to produce an error message. Instead it can be simplified by using trace_seq function helpers. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
There's no reason to BUG if there's a bug in the filtering code. Simply do a warning and return. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Rajvi Jingar authored
This adds inter-event hist triggers testcases which covers following: - create/remove synthetic event - disable histogram for synthetic event - extended error support - field variable support - histogram variables - histogram trigger onmatch action - histogram trigger onmax action - histogram trigger onmatch-onmax action - simple expression support - combined histogram Here is the test result. === Ftrace unit tests === [1] event trigger - test extended error support [PASS] [2] event trigger - test field variable support [PASS] [3] event trigger - test inter-event combined histogram trigger [PASS] [4] event trigger - test inter-event histogram trigger onmatch action [PASS] [5] event trigger - test inter-event histogram trigger onmatch-onmax action [PASS] [6] event trigger - test inter-event histogram trigger onmax action [PASS] [7] event trigger - test synthetic event create remove [PASS] Link: http://lkml.kernel.org/r/e07ef1e72f7bf0f84dc87c9b736d6dc91b4b0b49.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Rajvi Jingar <rajvi.jingar@intel.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
So that users know that inter-event tracing is supported as part of the HIST_TRIGGERS option, include text to that effect in the help text. Link: http://lkml.kernel.org/r/a38e24231d8d980be636b56d35814570acfd167a.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Synthetic events can be done within the recording of other events. Notify the ring buffer via ring_buffer_nest_start() and ring_buffer_nest_end() that this is intended and not to block it due to its recursion protection. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The ring-buffer code has recusion protection in case tracing ends up tracing itself, the ring-buffer will detect that it was called at the same context (normal, softirq, interrupt or NMI), and not continue to record the event. With the histogram synthetic events, they are called while tracing another event at the same context. The recusion protection triggers because it detects tracing at the same context and stops it. Add ring_buffer_nest_start() and ring_buffer_nest_end() that will notify the ring buffer that a trace is about to happen within another trace and that it is intended, and not to trigger the recursion blocking. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
The default clock if timestamps are used in a histogram is "global". If timestamps aren't used, the clock is irrelevant. Use the "clock=" param only if you want to override the default "global" clock for a histogram with timestamps. Link: http://lkml.kernel.org/r/427bed1389c5d22aa40c3e0683e30cc3d151e260.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Rajvi Jingar <rajvi.jingar@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Allow tracing code outside of trace.c to access tracing_set_clock(). Some applications may require a particular clock in order to function properly, such as latency calculations. Also, add an accessor returning the current clock string. Link: http://lkml.kernel.org/r/6d1c53e9ee2163f54e1849f5376573f54f0e6009.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Add background and details on inter-event hist triggers, including hist variables, synthetic events, and actions. Link: http://lkml.kernel.org/r/b0414efb66535aa52aa7411f58c3d56724027fce.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Baohong Liu <baohong.liu@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
With the addition of variables and actions, it's become necessary to provide more detailed error information to users about syntax errors. Add a 'last error' facility accessible via the erroring event's 'hist' file. Reading the hist file after an error will display more detailed information about what went wrong, if information is available. This extended error information will be available until the next hist trigger command for that event. # echo xxx > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger echo: write error: Invalid argument # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist ERROR: Couldn't yyy: zzz Last command: xxx Also add specific error messages for variable and action errors. Link: http://lkml.kernel.org/r/64e9c422fc8aeafcc2f7a3b4328c0cffe7969129.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Add support for alias=$somevar where alias can be used as onmatch.xxx($alias). Aliases are a way of creating a new name for an existing variable, for flexibly in making naming more clear in certain cases. For example in the below the user perhaps feels that using $new_lat in the synthetic event invocation is opaque or doesn't fit well stylistically with previous triggers, so creates an alias of $new_lat named $latency and uses that in the call instead: # echo 'hist:keys=next_pid:new_lat=common_timestamp.usecs' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=pid:latency=$new_lat: onmatch(sched.sched_switch).wake2($latency,pid)' > /sys/kernel/debug/tracing/events/synthetic/wake1/trigger Link: http://lkml.kernel.org/r/ef20a65d921af3a873a6f1e8c71407c926d5586f.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
A common key to use in a histogram is the cpuid - add a new cpu 'synthetic' field named 'cpu' for that purpose. Link: http://lkml.kernel.org/r/89537645bfc957e0d76e2cacf5f0ada88691a6cc.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
The existing code only allows for one space before and after the 'if' specifying the filter for a hist trigger. Add code to make that more permissive as far as whitespace goes. Specifically, we want to allow spaces in the trigger itself now that we have additional syntax (onmatch/onmax) where spaces are more natural e.g. spaces after commas in param lists. Link: http://lkml.kernel.org/r/1053090c3c308d4f431accdeb59dff4b511d4554.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Add an 'onmax(var).save(field,...)' hist trigger action which is invoked whenever an event exceeds the current maximum. The end result is that the trace event fields or variables specified as the onmax.save() params will be saved if 'var' exceeds the current maximum for that hist trigger entry. This allows context from the event that exhibited the new maximum to be saved for later reference. When the histogram is displayed, additional fields displaying the saved values will be printed. As an example the below defines a couple of hist triggers, one for sched_wakeup and another for sched_switch, keyed on pid. Whenever a sched_wakeup occurs, the timestamp is saved in the entry corresponding to the current pid, and when the scheduler switches back to that pid, the timestamp difference is calculated. If the resulting latency exceeds the current maximum latency, the specified save() values are saved: # echo 'hist:keys=pid:ts0=common_timestamp.usecs \ if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:\ wakeup_lat=common_timestamp.usecs-$ts0:\ onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) \ if next_comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger When the histogram is displayed, the max value and the saved values corresponding to the max are displayed following the rest of the fields: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 3728 } hitcount: 199 \ max: 123 next_comm: cyclictest prev_pid: 0 \ prev_prio: 120 prev_comm: swapper/3 { next_pid: 3730 } hitcount: 1321 \ max: 15 next_comm: cyclictest prev_pid: 0 \ prev_prio: 120 prev_comm: swapper/1 { next_pid: 3729 } hitcount: 1973\ max: 25 next_comm: cyclictest prev_pid: 0 \ prev_prio: 120 prev_comm: swapper/0 Totals: Hits: 3493 Entries: 3 Dropped: 0 Link: http://lkml.kernel.org/r/006907f71b1e839bb059337ec3c496f84fcb71de.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Add an 'onmatch(matching.event).<synthetic_event_name>(param list)' hist trigger action which is invoked with the set of variables or event fields named in the 'param list'. The result is the generation of a synthetic event that consists of the values contained in those variables and/or fields at the time the invoking event was hit. As an example the below defines a simple synthetic event using a variable defined on the sched_wakeup_new event, and shows the event definition with unresolved fields, since the sched_wakeup_new event with the testpid variable hasn't been defined yet: # echo 'wakeup_new_test pid_t pid; int prio' >> \ /sys/kernel/debug/tracing/synthetic_events # cat /sys/kernel/debug/tracing/synthetic_events wakeup_new_test pid_t pid; int prio The following hist trigger both defines a testpid variable and specifies an onmatch() trace action that uses that variable along with a non-variable field to generate a wakeup_new_test synthetic event whenever a sched_wakeup_new event occurs, which because of the 'if comm == "cyclictest"' filter only happens when the executable is cyclictest: # echo 'hist:testpid=pid:keys=$testpid:\ onmatch(sched.sched_wakeup_new).wakeup_new_test($testpid, prio) \ if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_wakeup_new/trigger Creating and displaying a histogram based on those events is now just a matter of using the fields and new synthetic event in the tracing/events/synthetic directory, as usual: # echo 'hist:keys=pid,prio:sort=pid,prio' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeup_new_test/trigger Link: http://lkml.kernel.org/r/8c2a574bcb7530c876629c901ecd23911b14afe8.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Rajvi Jingar <rajvi.jingar@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Users should be able to directly specify event fields in hist trigger 'actions' rather than being forced to explicitly create a variable for that purpose. Add support allowing fields to be used directly in actions, which essentially does just that - creates 'invisible' variables for each bare field specified in an action. If a bare field refers to a field on another (matching) event, it even creates a special histogram for the purpose (since variables can't be defined on an existing histogram after histogram creation). Here's a simple example that demonstrates both. Basically the onmatch() action creates a list of variables corresponding to the parameters of the synthetic event to be generated, and then uses those values to generate the event. So for the wakeup_latency synthetic event 'call' below the first param, $wakeup_lat, is a variable defined explicitly on sched_switch, where 'next_pid' is just a normal field on sched_switch, and prio is a normal field on sched_waking. Since the mechanism works on variables, those two normal fields just have 'invisible' variables created internally for them. In the case of 'prio', which is on another event, we actually need to create an additional hist trigger and define the invisible variable on that, since once a hist trigger is defined, variables can't be added to it later. echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> /sys/kernel/debug/tracing/synthetic_events echo 'hist:keys=pid:ts0=common_timestamp.usecs >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,prio) >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger Link: http://lkml.kernel.org/r/8e8dcdac1ea180ed7a3689e1caeeccede9dc42b3.1516069914.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-