Merge tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "Arnd sent a workaround for a false positive warning which was showing
  up with GCC 14.1"

* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: work around gcc-14.1 false-positive warning

Pull clk fixes from Stephen Boyd:
 "A few clk driver fixes for the merge window to fix the build and boot
  on some SoCs.

   - Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
     that stack contents aren't used for things like clk flags leading
     to unexpected behavior

   - Don't leak stack contents in a debug print in the new Sophgo clk
     driver

   - Disable the new T-Head clk driver on 32-bit targets to fix the
     build due to a division

   - Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
     last cycle by using a struct clk_hw directly instead of a struct
     clk consumer"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
  clk: T-Head: Disable on 32-bit Targets
  clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
  clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use

Pull i3c updates from Alexandre Belloni:
 "This cycle, there are new features for the Designware controller and
  fixes for the other IPs:

   - dw: optional apb clock and power management support, IBI handling
     fixes

   - mipi-i3c-hci: IBI handling fixes

   - svc: a few fixes"

* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  dt-bindings: i3c: add header for generic I3C flags
  i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
  i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
  i3c: dw: Add power management support
  i3c: dw: Add some functions for reusability
  i3c: dw: Save timing registers and other values
  i3c: master: svc: Improve DAA STOP handle code logic
  i3c: dw: Add optional apb clock
  i3c: dw: Use new *_enabled clk API
  dt-bindings: i3c: dw: Add apb clock binding
  i3c: master: svc: Convert comma to semicolon
  i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
  i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
  i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
  i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
  i3c: dw: Remove ibi_capable property
  i3c: dw: Fix IBI intr programming
  i3c: dw: Fix clearing queue thld
  i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
  i3c: master: svc: resend target address when get NACK

Pull thermal control fix from Rafael Wysocki:
 "Prevent the thermal core from flooding the kernel log with useless
  messages if thermal zone temperature can never be determined (or its
  sensor has failed permanently) and make it finally give up and disable
  defective thermal zones (Rafael Wysocki)"

* tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Back off when polling thermal zones on errors
  thermal: trip: Split thermal_zone_device_set_mode()

Merge tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc hotfixes from Andrew Morton:
 "11 hotfixes, 7 of which are cc:stable.  7 are MM, 4 are other"

* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: handle inconsistent state in nilfs_btnode_create_block()
  selftests/mm: skip test for non-LPA2 and non-LVA systems
  mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
  mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
  alloc_tag: outline and export free_reserved_page()
  decompress_bunzip2: fix rare decompression failure
  mm/huge_memory: avoid PMD-size page cache if needed
  mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
  mm: fix old/young bit handling in the faulting path
  dt-bindings: arm: update James Clark's email address
  MAINTAINERS: mailmap: update James Clark's email address

Pull timer migration updates from Thomas Gleixner:
 "Fixes and minor updates for the timer migration code:

   - Stop testing the group->parent pointer as it is not guaranteed to
     be stable over a chain of operations by design.

     This includes a warning which would be nice to have but it produces
     false positives due to the racy nature of the check.

   - Plug a race between CPUs going in and out of idle and a CPU hotplug
     operation. The latter can create and connect a new hierarchy level
     which is missed in the concurrent updates of CPUs which go into
     idle. As a result the events of such a CPU might not be processed
     and timers go stale.

     Cure it by splitting the hotplug operation into a prepare and
     online callback. The prepare callback is guaranteed to run on an
     online and therefore active CPU. This CPU updates the hierarchy and
     being online ensures that there is always at least one migrator
     active which handles the modified hierarchy correctly when going
     idle. The online callback which runs on the incoming CPU then just
     marks the CPU active and brings it into operation.

   - Improve tracing and polish the code further so it is more obvious
     what's going on"

* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Fix grammar in comment
  timers/migration: Spare write when nothing changed
  timers/migration: Rename childmask by groupmask to make naming more obvious
  timers/migration: Read childmask and parent pointer in a single place
  timers/migration: Use a single struct for hierarchy walk data
  timers/migration: Improve tracing
  timers/migration: Move hierarchy setup into cpuhotplug prepare callback
  timers/migration: Do not rely always on group->parent

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
   cache info (via PPTT) on ACPI-based systems.

 - The trap entry/exit code no longer breaks the return address stack
   predictor on many systems, which results in an improvement to trap
   latency.

 - Support for HAVE_ARCH_STACKLEAK.

 - The sv39 linear map has been extended to support 128GiB mappings.

 - The frequency of the mtime CSR is now visible via hwprobe.

* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
  RISC-V: Provide the frequency of time CSR via hwprobe
  riscv: Extend sv39 linear mapping max size to 128G
  riscv: enable HAVE_ARCH_STACKLEAK
  riscv: signal: Remove unlikely() from WARN_ON() condition
  riscv: Improve exception and system call latency
  RISC-V: Select ACPI PPTT drivers
  riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
  riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
  RISC-V: ACPI: Enable SPCR table for console output on RISC-V
  riscv: boot: remove duplicated targets line
  trace: riscv: Remove deprecated kprobe on ftrace support
  riscv: cpufeature: Extract common elements from extension checking
  riscv: Introduce vendor variants of extension helpers
  riscv: Add vendor extensions to /proc/cpuinfo
  riscv: Extend cpufeature.c to detect vendor extensions
  RISC-V: run savedefconfig for defconfig
  RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
  ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
  ACPI: NUMA: change the ACPI_NUMA to a hidden option
  ACPI: NUMA: Add handler for SRAT RINTC affinity structure
  ...

Pull xen fixes from Juergen Gross:
 "Two fixes for issues introduced in this merge window:

   - fix enhanced debugging in the Xen multicall handling

   - two patches fixing a boot failure when running as dom0 in PVH mode"

* tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: fix memblock_reserve() usage on PVH
  x86/xen: move xen_reserve_extra_memory()
  xen: fix multicall debug data referencing

The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.

For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.

And when that simple constant was then used inside other expansions:

  #define pageblock_nr_pages      (1UL << pageblock_order)
  #define pageblock_start_pfn(pfn)  ALIGN_DOWN((pfn), pageblock_nr_pages)

and we then use that inside a 'max()' macro:

	case ISOLATE_SUCCESS:
		update_cached = false;
		last_migrated_pfn = max(cc->zone->zone_start_pfn,
			pageblock_start_pfn(cc->migrate_pfn - 1));

the end result was that one statement expanding to 253kB in size.

There are probably other cases of this, but this one case certainly
stood out.

I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use.  These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.

This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.

So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.

And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.

For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type.  So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.

But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.

The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.

So let's split that one single line to just be simpler.  I think it ends
up being more legible to humans too at the same time.  Now that single
file compiles in under a second.
Reported-and-reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/c83c17bb-be75-4c67-979d-54eee38774c6@lucifer.local/
Link: https://staticthinking.wordpress.com/2023/07/25/wsign-compare-is-garbage/ [1]
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.

It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.

So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.

Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com
Fixes: a60be987 ("nilfs2: B-tree node cache")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+89cc4f2324ed37988b60@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Post my improvement of the test in e4a4ba41 ("selftests/mm:
va_high_addr_switch: dynamically initialize testcases to enable LPA2
testing"):

The test begins to fail on 4k and 16k pages, on non-LPA2 systems.  To
reduce noise in the CI systems, let us skip the test when higher address
space is not implemented.

Link: https://lkml.kernel.org/r/20240718052504.356517-1-dev.jain@arm.com
Fixes: e4a4ba41 ("selftests/mm: va_high_addr_switch: dynamically initialize testcases to enable LPA2 testing")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It's expected that no page should be left in pcp_list after calling
zone_pcp_disable() in offline_pages().  Previously, it's observed that
offline_pages() gets stuck [1] due to some pages remaining in pcp_list.

Cause:
There is a race condition between drain_pages_zone() and __rmqueue_pcplist()
involving the pcp->count variable. See below scenario:

         CPU0                              CPU1
    ----------------                    ---------------
                                      spin_lock(&pcp->lock);
                                      __rmqueue_pcplist() {
zone_pcp_disable() {
                                        /* list is empty */
                                        if (list_empty(list)) {
                                          /* add pages to pcp_list */
                                          alloced = rmqueue_bulk()
  mutex_lock(&pcp_batch_high_lock)
  ...
  __drain_all_pages() {
    drain_pages_zone() {
      /* read pcp->count, it's 0 here */
      count = READ_ONCE(pcp->count)
      /* 0 means nothing to drain */
                                          /* update pcp->count */
                                          pcp->count += alloced << order;
      ...
                                      ...
                                      spin_unlock(&pcp->lock);

In this case, after calling zone_pcp_disable() though, there are still some
pages in pcp_list. And these pages in pcp_list are neither movable nor
isolated, offline_pages() gets stuck as a result.

Solution:
Expand the scope of the pcp->lock to also protect pcp->count in
drain_pages_zone(), to ensure no pages are left in the pcp list after
zone_pcp_disable()

[1] https://lore.kernel.org/linux-mm/6a07125f-e720-404c-b2f9-e55f3f166e85@fujitsu.com/

Link: https://lkml.kernel.org/r/20240723064428.1179519-1-lizhijian@fujitsu.com
Fixes: 4b23a68f ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Oliver Sand reported a performance regression caused by commit
98c9daf5 ("mm: memcg: guard memcg1-specific members of struct
mem_cgroup_per_node"), which puts some fields of the mem_cgroup_per_node
structure under the CONFIG_MEMCG_V1 config option.  Apparently it causes a
false cache sharing between lruvec and lru_zone_size members of the
structure.  Fix it by adding an explicit padding after the lruvec member.

Even though the padding is not required with CONFIG_MEMCG_V1 set, it seems
like the introduced memory overhead is not significant enough to warrant
another divergence in the mem_cgroup_per_node layout, so the padding is
added unconditionally.

Link: https://lkml.kernel.org/r/20240723171244.747521-1-roman.gushchin@linux.dev
Fixes: 98c9daf5 ("mm: memcg: guard memcg1-specific members of struct mem_cgroup_per_node")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407121335.31a10cb6-oliver.sang@intel.comTested-by: Oliver Sang <oliver.sang@intel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Outline and export free_reserved_page() because modules use it and it in
turn uses page_ext_{get|put} which should not be exported.  The same
result could be obtained by outlining {get|put}_page_tag_ref() but that
would have higher performance impact as these functions are used in more
performance critical paths.

Link: https://lkml.kernel.org/r/20240717212844.2749975-1-surenb@google.com
Fixes: dcfe378c ("lib: introduce support for page allocation tagging")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407080044.DWMC9N9I-lkp@intel.com/Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: <stable@vger.kernel.org>	[6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The decompression code parses a huffman tree and counts the number of
symbols for a given bit length.  In rare cases, there may be >= 256
symbols with a given bit length, causing the unsigned char to overflow. 
This causes a decompression failure later when the code tries and fails to
find the bit length for a given symbol.

Since the maximum number of symbols is 258, use unsigned short instead.

Link: https://lkml.kernel.org/r/20240717162016.1514077-1-ross.lagerwall@citrix.com
Fixes: bc22c17e ("bzip2/lzma: library support for gzip, bzip2 and lzma decompression")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

xarray can't support arbitrary page cache size.  the largest and supported
page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d9064
("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray").  However,
it's possible to have 512MB page cache in the huge memory's collapsing
path on ARM64 system whose base page size is 64KB.  512MB page cache is
breaking the limitation and a warning is raised when the xarray entry is
split as shown in the following example.

[root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize
KernelPageSize:       64 kB
[root@dhcp-10-26-1-207 ~]# cat /tmp/test.c
   :
int main(int argc, char **argv)
{
	const char *filename = TEST_XFS_FILENAME;
	int fd = 0;
	void *buf = (void *)-1, *p;
	int pgsize = getpagesize();
	int ret = 0;

	if (pgsize != 0x10000) {
		fprintf(stdout, "System with 64KB base page size is required!\n");
		return -EPERM;
	}

	system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb");
	system("echo 1 > /proc/sys/vm/drop_caches");

	/* Open the xfs file */
	fd = open(filename, O_RDONLY);
	assert(fd > 0);

	/* Create VMA */
	buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0);
	assert(buf != (void *)-1);
	fprintf(stdout, "mapped buffer at 0x%p\n", buf);

	/* Populate VMA */
	ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE);
	assert(ret == 0);
	ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ);
	assert(ret == 0);

	/* Collapse VMA */
	ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
	assert(ret == 0);
	ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE);
	if (ret) {
		fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno);
		goto out;
	}

	/* Split xarray entry. Write permission is needed */
	munmap(buf, TEST_MEM_SIZE);
	buf = (void *)-1;
	close(fd);
	fd = open(filename, O_RDWR);
	assert(fd > 0);
	fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
 		  TEST_MEM_SIZE - pgsize, pgsize);
out:
	if (buf != (void *)-1)
		munmap(buf, TEST_MEM_SIZE);
	if (fd > 0)
		close(fd);

	return ret;
}

[root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test
[root@dhcp-10-26-1-207 ~]# /tmp/test
 ------------[ cut here ]------------
 WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib    \
 nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct      \
 nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4      \
 ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse   \
 xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net  \
 sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio
 CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9
 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
 pc : xas_split_alloc+0xf8/0x128
 lr : split_huge_page_to_list_to_order+0x1c4/0x780
 sp : ffff8000ac32f660
 x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0
 x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d
 x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000
 x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000
 x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000
 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
 x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c
 x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8
 x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40
 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
 Call trace:
  xas_split_alloc+0xf8/0x128
  split_huge_page_to_list_to_order+0x1c4/0x780
  truncate_inode_partial_folio+0xdc/0x160
  truncate_inode_pages_range+0x1b4/0x4a8
  truncate_pagecache_range+0x84/0xa0
  xfs_flush_unmap_range+0x70/0x90 [xfs]
  xfs_file_fallocate+0xfc/0x4d8 [xfs]
  vfs_fallocate+0x124/0x2f0
  ksys_fallocate+0x4c/0xa0
  __arm64_sys_fallocate+0x24/0x38
  invoke_syscall.constprop.0+0x7c/0xd8
  do_el0_svc+0xb4/0xd0
  el0_svc+0x44/0x1d8
  el0t_64_sync_handler+0x134/0x150
  el0t_64_sync+0x17c/0x180

Fix it by correcting the supported page cache orders, different sets for
DAX and other files.  With it corrected, 512MB page cache becomes
disallowed on all non-DAX files on ARM64 system where the base page size
is 64KB.  After this patch is applied, the test program fails with error
-EINVAL returned from __thp_vma_allowable_orders() and the madvise()
system call to collapse the page caches.

Link: https://lkml.kernel.org/r/20240715000423.316491-1-gshan@redhat.com
Fixes: 6b24ca4a ("mm: Use multi-index entries in the page cache")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org>	[5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Yves-Alexis Perez reported commit 4ef9ad19 ("mm: huge_memory: don't
force huge page alignment on 32 bit") didn't work for x86_32 [1].  It is
because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT.

!CONFIG_64BIT should cover all 32 bit machines.

[1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/

Link: https://lkml.kernel.org/r/20240712155855.1130330-1-yang@os.amperecomputing.com
Fixes: 4ef9ad19 ("mm: huge_memory: don't force huge page alignment on 32 bit")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Yves-Alexis Perez <corsac@debian.org>
Tested-by: Yves-Alexis Perez <corsac@debian.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>	[6.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit 3bd786f7 ("mm: convert do_set_pte() to set_pte_range()")
replaced do_set_pte() with set_pte_range() and that introduced a
regression in the following faulting path of non-anonymous vmas which
caused the PTE for the faulting address to be marked as old instead of
young.

handle_pte_fault()
  do_pte_missing()
    do_fault()
      do_read_fault() || do_cow_fault() || do_shared_fault()
        finish_fault()
          set_pte_range()

The polarity of prefault calculation is incorrect.  This leads to prefault
being incorrectly set for the faulting address.  The following check will
incorrectly mark the PTE old rather than young.  On some architectures
this will cause a double fault to mark it young when the access is
retried.

    if (prefault && arch_wants_old_prefaulted_pte())
        entry = pte_mkold(entry);

On a subsequent fault on the same address, the faulting path will see a
non NULL vmf->pte and instead of reaching the do_pte_missing() path, PTE
will then be correctly marked young in handle_pte_fault() itself.

Due to this bug, performance degradation in the fault handling path will
be observed due to unnecessary double faulting.

Link: https://lkml.kernel.org/r/20240710014539.746200-1-rtummala@nvidia.com
Fixes: 3bd786f7 ("mm: convert do_set_pte() to set_pte_range()")
Signed-off-by: Ram Tummala <rtummala@nvidia.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

My new address is james.clark@linaro.org

Link: https://lkml.kernel.org/r/20240709102512.31212-3-james.clark@linaro.orgSigned-off-by: James Clark <james.clark@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Hao Zhang <quic_hazha@quicinc.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Mao Jinlong <quic_jinlmao@quicinc.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

My new address is james.clark@linaro.org

Link: https://lkml.kernel.org/r/20240709102512.31212-2-james.clark@linaro.orgSigned-off-by: James Clark <james.clark@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Hao Zhang <quic_hazha@quicinc.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Mao Jinlong <quic_jinlmao@quicinc.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'auxdisplay-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull auxdisplay updates from Geert Uytterhoeven:

  - add support for configuring the boot message on line displays

  - miscellaneous fixes and improvements

* tag 'auxdisplay-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  auxdisplay: ht16k33: Drop reference after LED registration
  auxdisplay: Use sizeof(*pointer) instead of sizeof(type)
  auxdisplay: hd44780: add missing MODULE_DESCRIPTION() macro
  auxdisplay: linedisp: add missing MODULE_DESCRIPTION() macro
  auxdisplay: linedisp: Support configuring the boot message
  auxdisplay: charlcd: Provide a forward declaration

Pull sound fixes from Takashi Iwai:
 "A collection of fixes gathered since the previous pull.

  We see a bit large LOCs at a HD-audio quirk, but that's only bulk COEF
  data, hence it's safe to take. In addition to that, there were two
  minor fixes for MIDI 2.0 handling for ALSA core, and the rest are all
  rather random small and device-specific fixes"

* tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: fsl-asoc-card: Dynamically allocate memory for snd_soc_dai_link_components
  ASoC: amd: yc: Support mic on Lenovo Thinkpad E16 Gen 2
  ALSA: hda/realtek: Implement sound init sequence for Samsung Galaxy Book3 Pro 360
  ALSA: hda/realtek: cs35l41: Fixup remaining asus strix models
  ASoC: SOF: ipc4-topology: Preserve the DMA Link ID for ChainDMA on unprepare
  ASoC: SOF: ipc4-topology: Only handle dai_config with HW_PARAMS for ChainDMA
  ALSA: ump: Force 1 Group for MIDI1 FBs
  ALSA: ump: Don't update FB name for static blocks
  ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
  ASoC: TAS2781: Fix tasdev_load_calibrated_data()
  ASoC: tegra: select CONFIG_SND_SIMPLE_CARD_UTILS
  ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable
  ALSA: usb-audio: Move HD Webcam quirk to the right place
  ALSA: hda: tas2781: mark const variables as __maybe_unused
  ALSA: usb-audio: Fix microphone sound on HD webcam.
  ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
  ASoC: Intel: Fix RT5650 SSP lookup
  ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices
  ASoC: SOF: imx8m: Fix DSP control regmap retrieval

Pull drm fixes from Dave Airlie:
 "Fixes for rc1, mostly amdgpu, i915 and xe, with some other misc ones,
  doesn't seem to be anything too serious.

  amdgpu:
   - Bump driver version for GFX12 DCC
   - DC documention warning fixes
   - VCN unified queue power fix
   - SMU fix
   - RAS fix
   - Display corruption fix
   - SDMA 5.2 workaround
   - GFX12 fixes
   - Uninitialized variable fix
   - VCN/JPEG 4.0.3 fixes
   - Misc display fixes
   - RAS fixes
   - VCN4/5 harvest fix
   - GPU reset fix

  i915:
   - Reset intel_dp->link_trained before retraining the link
   - Don't switch the LTTPR mode on an active link
   - Do not consider preemption during execlists_dequeue for gen8
   - Allow NULL memory region

  xe:
   - xe_exec ioctl minor fix on sync entry cleanup upon error
   - SRIOV: limit VF LMEM provisioning
   - Wedge mode fixes

  v3d:
   - fix indirect dispatch on newer v3d revs

  panel:
   - fix panel backlight bindings"

* tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel: (39 commits)
  drm/amdgpu: reset vm state machine after gpu reset(vram lost)
  drm/amdgpu: add missed harvest check for VCN IP v4/v5
  drm/amdgpu: Fix eeprom max record count
  drm/amdgpu: fix ras UE error injection failure issue
  drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
  drm/amd/display: Check for NULL pointer
  drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
  drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
  drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
  drm/amd/amdgpu: Fix uninitialized variable warnings
  drm/amdgpu: Fix atomics on GFX12
  drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
  drm/i915: Allow NULL memory region
  drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8
  dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
  drm/xe: Don't suspend device upon wedge
  drm/xe: Wedge the entire device
  drm/xe/pf: Limit fair VF LMEM provisioning
  drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup
  drm/amd/display: fix corruption with high refresh rates on DCN 3.0
  ...

Pull more s390 updates from Vasily Gorbik:

 - Fix KMSAN build breakage caused by the conflict between s390 and
   mm-stable trees

 - Add KMSAN page markers for ptdump

 - Add runtime constant support

 - Fix __pa/__va for modules under non-GPL licenses by exporting
   necessary vm_layout struct with EXPORT_SYMBOL to prevent linkage
   problems

 - Fix an endless loop in the CF_DIAG event stop in the CPU Measurement
   Counter Facility code when the counter set size is zero

 - Remove the PROTECTED_VIRTUALIZATION_GUEST config option and enable
   its functionality by default

 - Support allocation of multiple MSI interrupts per device and improve
   logging of architecture-specific limitations

 - Add support for lowcore relocation as a debugging feature to catch
   all null ptr dereferences in the kernel address space, improving
   detection beyond the current implementation's limited write access
   protection

 - Clean up and rework CPU alternatives to allow for callbacks and early
   patching for the lowcore relocation

* tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
  s390: Remove protvirt and kvm config guards for uv code
  s390/boot: Add cmdline option to relocate lowcore
  s390/kdump: Make kdump ready for lowcore relocation
  s390/entry: Make system_call() ready for lowcore relocation
  s390/entry: Make ret_from_fork() ready for lowcore relocation
  s390/entry: Make __switch_to() ready for lowcore relocation
  s390/entry: Make restart_int_handler() ready for lowcore relocation
  s390/entry: Make mchk_int_handler() ready for lowcore relocation
  s390/entry: Make int handlers ready for lowcore relocation
  s390/entry: Make pgm_check_handler() ready for lowcore relocation
  s390/entry: Add base register to CHECK_VMAP_STACK/CHECK_STACK macro
  s390/entry: Add base register to SIEEXIT macro
  s390/entry: Add base register to MBEAR macro
  s390/entry: Make __sie64a() ready for lowcore relocation
  s390/head64: Make startup code ready for lowcore relocation
  s390: Add infrastructure to patch lowcore accesses
  s390/atomic_ops: Disable flag outputs constraint for GCC versions below 14.2.0
  s390/entry: Move SIE indicator flag to thread info
  s390/nmi: Simplify ptregs setup
  s390/alternatives: Remove alternative facility list
  ...

Pull arm64 fixes from Will Deacon:
 "The usual summary below, but the main fix is for the fast GUP lockless
  page-table walk when we have a combination of compile-time and
  run-time folding of the p4d and the pud respectively.

   - Remove some redundant Kconfig conditionals

   - Fix string output in ptrace selftest

   - Fix fast GUP crashes in some page-table configurations

   - Remove obsolete linker option when building the vDSO

   - Fix some sysreg field definitions for the GIC"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Fix lockless walks with static and dynamic page-table folding
  arm64/sysreg: Correct the values for GICv4.1
  arm64/vdso: Remove --hash-style=sysv
  kselftest: missing arg in ptrace.c
  arm64/Kconfig: Remove redundant 'if HAVE_FUNCTION_GRAPH_TRACER'
  arm64: remove redundant 'if HAVE_ARCH_KASAN' in Kconfig

Pull ceph updates from Ilya Dryomov:
 "A small patchset to address bogus I/O errors and ultimately an
  assertion failure in the face of watch errors with -o exclusive
  mappings in RBD marked for stable and some assorted CephFS fixes"

* tag 'ceph-for-6.11-rc1' of https://github.com/ceph/ceph-client:
  rbd: don't assume rbd_is_lock_owner() for exclusive mappings
  rbd: don't assume RBD_LOCK_STATE_LOCKED for exclusive mappings
  rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
  ceph: fix incorrect kmalloc size of pagevec mempool
  ceph: periodically flush the cap releases
  ceph: convert comma to semicolon in __ceph_dentry_dir_lease_touch()
  ceph: use cap_wait_list only if debugfs is enabled

Pull more erofs updates from Gao Xiang:

 - Support STATX_DIOALIGN and FS_IOC_GETFSSYSFSPATH

 - Fix a race of LZ4 decompression due to recent refactoring

 - Another multi-page folio adaption in erofs_bread()

* tag 'erofs-for-6.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: convert comma to semicolon
  erofs: support multi-page folios for erofs_bread()
  erofs: add support for FS_IOC_GETFSSYSFSPATH
  erofs: fix race in z_erofs_get_gbuf()
  erofs: support STATX_DIOALIGN

Pull struct file leak fixes from Al Viro:
 "a couple of leaks on failure exits missing fdput()"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  lirc: rc_dev_get_from_fd(): fix file leak
  powerpc: fix a file leak in kvm_vcpu_ioctl_enable_cap()

On arm64 we build compressed images, but "make install" by default will
install the old non-compressed one.  To actually get the compressed
image install, you need to use "make zinstall", which is not the usual
way to install a kernel.

Which may not sound like much of an issue, but when you deal with
multiple architectures (and years of your fingers knowing the regular
"make install" incantation), this inconsistency is pretty annoying.

But as Will Deacon says:
 "Sadly, bootloaders being as top quality as you might expect, I don't
  think we're in a position to rely on decompressor support across the
  board. Our Image.gz is literally just that -- we don't have a built-in
  decompressor (nor do I think we want to rush into that again after the
  fun we had on arm32) and the recent EFI zboot support solves that
  problem for platforms using EFI.

  Changing the default 'install' target terrifies me. There are bound to
  be folks with embedded boards who've scripted this and we could really
  ruin their day if we quietly give them a compressed kernel that their
  bootloader doesn't know how to handle :/"

So make this conditional on a new "COMPRESSED_INSTALL" option.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull bitmap updates from Yury Norov:
 "Random fixes"

* tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux:
  riscv: Remove unnecessary int cast in variable_fls()
  radix tree test suite: put definition of bitmap_clear() into lib/bitmap.c
  bitops: Add a comment explaining the double underscore macros
  lib: bitmap: add missing MODULE_DESCRIPTION() macros
  cpumask: introduce assign_cpu() macro

The RISC-V architecture makes a real time counter CSR (via RDTIME
instruction) available for applications in U-mode but there is no
architected mechanism for an application to discover the frequency
the counter is running at. Some applications (e.g., DPDK) use the
time counter for basic performance analysis as well as fine grained
time-keeping.

Add support to the hwprobe system call to export the time CSR
frequency to code running in U-mode.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20240702033731.71955-2-cuiyunhui@bytedance.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This harmonizes all virtual addressing modes which can now all map
(PGDIR_SIZE * PTRS_PER_PGD) / 4 of physical memory.

The RISCV implementation of KASAN requires that the boundary between
shallow mappings are aligned on an 8G boundary. In this case we need
VMALLOC_START to be 8G aligned. So although we only need to move the
start of the linear mapping down by 4GiB to allow 128GiB to be mapped,
we actually move it down by 8GiB (creating a 4GiB hole between the
linear mapping and KASAN shadow space) to maintain the alignment
requirement.
Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240630110550.1731929-1-stuart.menefy@codasip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This series adds support for ACPI PPTT via cacheinfo.

* b4-shazam-merge:
  RISC-V: Select ACPI PPTT drivers
  riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
  riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()

Link: https://lore.kernel.org/r/20240617131425.7526-1-cuiyunhui@bytedance.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Sia Jee Heng <jeeheng.sia@starfivetech.com> says:

The ACPI SPCR code has been used to enable console output for ARM64 and
X86. The same code can be reused for RISC-V. Furthermore, SPCR table is
mandated for headless system as outlined in the RISC-V BRS
Specification, chapter 6.

* b4-shazam-merge:
  RISC-V: ACPI: Enable SPCR table for console output on RISC-V

Link: https://lore.kernel.org/r/20240502073751.102093-1-jeeheng.sia@starfivetech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add support for the stackleak feature. Whenever the kernel returns to user
space the kernel stack is filled with a poison value.

At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.

Tested on qemu and milkv duo:
/ # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
[   38.675575] lkdtm: Performing direct entry STACKLEAK_ERASING
[   38.678448] lkdtm: stackleak stack usage:
[   38.678448]   high offset: 288 bytes
[   38.678448]   current:     496 bytes
[   38.678448]   lowest:      1328 bytes
[   38.678448]   tracked:     1328 bytes
[   38.678448]   untracked:   448 bytes
[   38.678448]   poisoned:    14312 bytes
[   38.678448]   low offset:  8 bytes
[   38.689887] lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240623235316.2010-1-jszhang@kernel.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

"WARN_ON(unlikely(x))" is excessive. WARN_ON() already uses unlikely()
internally.
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240620033434.3778156-1-quic_zhonhan@quicinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Many CPUs implement return address branch prediction as a stack. The
RISCV architecture refers to this as a return address stack (RAS). If
this gets corrupted then the CPU will mispredict at least one but
potentally many function returns.

There are two issues with the current RISCV exception code:

- We are using the alternate link stack (x5/t0) for the indirect branch
  which makes the hardware think this is a function return. This will
  corrupt the RAS.

- We modify the return address of handle_exception to point to
  ret_from_exception. This will also corrupt the RAS.

Testing the null system call latency before and after the patch:

Visionfive2 (StarFive JH7110 / U74)
baseline: 189.87 ns
patched:  176.76 ns

Lichee pi 4a (T-Head TH1520 / C910)
baseline: 666.58 ns
patched:  636.90 ns

Just over 7% on the U74 and just over 4% on the C910.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20240607061335.2197383-1-cyrilbur@tenstorrent.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add header file for generic I3C flags to avoid hard code in dts file.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240715225351.3237284-1-Frank.Li@nxp.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

This code has a typo so it returns positive EIO instead of negative -EIO.  Fix
it!

Fixes: a7809cb368b9 ("i3c: master: svc: Improve DAA STOP handle code logic")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/e017edfc-da64-496b-8516-958bec27cd9a@stanley.mountainSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>