- 29 Nov, 2010 14 commits
-
-
Frank Blaschka authored
The tso hdr is longer then the regular l3 hdr. Fix the calculation of the total len by accounting the size of the tso hdr. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Device initialization of a qeth device contains a STARTLAN step. This step may fail, if cable is not yet plugged in. The qeth device stays in state HARDSETUP until cable is plugged in. This prevents further preparational initialization steps of the qeth device and its network interface. This patch makes sure initialization of qeth device continues, even though cable is not yet plugged in. Once carrier is available, qeth is notified, triggers a recovery which results in a working network interface. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Sachin Sant authored
Commit 1d7138de igmp: RCU conversion of in_dev->mc_list converted rwlock to RCU. Update the s390 network drivers(qeth & lcs) code to adapt to this change. V2 : Changes based on suggestions given by Eric Dumazet Signed-off-by:
Sachin Sant <sachinp@in.ibm.com> Signed-off-by:
-
Giuseppe Cavallaro authored
The commit to convert to use the dev_pm_ops struct introduces a bug. The shutdown flag is not yet used because the hibernation on memory is done by using the freeze callback. Thanks to Vlad for having reported it. Reported-by:
Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
Szymon Janc <szymon@janc.net.pl> Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Szymon Janc authored
forcedeth: include <linux/io.h> and <linux/uaccess.h> instead of <asm/io.h> and <asm/uaccess.h> as suggested by checkpatch Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Szymon Janc authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
- 28 Nov, 2010 26 commits
-
-
Breno Leitao authored
Currently the ret variable is not used for anything other than receive the value of the t3_adapter_error(), which will always be 0, because the reset parameter is 0. Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
Jozsef Kadlecsik authored
jhash is widely used in the kernel and because the functions are inlined, the cost in size is significant. Also, the new jhash functions are slightly larger than the previous ones so better un-inline. As a preparation step, the calls to the internal macros are replaced with the plain jhash function calls. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Timo Teräs authored
fl->fl_gre_key is network byte order contrary to fl->fl_icmp_*. Make xfrm_flowi_{s|d}port return network byte order values for gre key too. Signed-off-by:Timo Teräs <timo.teras@iki.fi> Signed-off-by:
-
Jonas Bonn authored
Calculating the BD entry using a modulus operation isn't optimal, especially inside the loop. This patch removes the modulus operations in favour of: i) simply checking for wrapping in the case of cur_rx ii) forcing num_tx to be a power of two and using it to mask out the entry from cur_tx The also prevents possible issues related overflow of the cur_rx and cur_tx counters. Signed-off-by:Jonas Bonn <jonas@southpole.se> Signed-off-by:
-
Jonas Bonn authored
update_ethoc_tx_stats doesn't need to return anything so make its return type void in order to avoid an unnecessary cast when the function is called. Signed-off-by:
-
Jonas Bonn authored
MDIO read and write were checking whether a timeout had expired to determine whether to recheck the result of the MDIO operation. Under heavy CPU usage, however, it was possible for the timeout to expire before the routine got around to be able to check a second time even, thus erroneousy returning an -EBUSY. This patch changes the the MDIO IO routines to try up to five times to complete the operation before giving up, thus lessening the dependency on CPU load. This resolves a problem whereby a ping flood would keep the CPU so busy that the above problem would manifest itself; the MDIO command to check link status would fail and the interface would erroneously be shut down. Signed-off-by:
-
Jonas Bonn authored
The old interrupt handling was incorrect in that it did not account for the fact that the interrupt source bits get set irregardless of whether or not their corresponding mask is set. This patch fixes that by masking off the source bits for masked interrupts. Furthermore, the handling of transmission events is moved to the NAPI polling handler alongside the reception handler, thus preventing a whole bunch of interrupts during heavy traffic. Signed-off-by:
-
Jonas Bonn authored
An interrupt may occur between checking bd.stat and clearing the interrupt source register which would result in the packet going totally unnoticed as the interrupt will be missed. Double check bd.stat after clearing the interrupt source register to guard against such an occurrence. Signed-off-by:
-
Adam Edvardsson authored
Occasionally, it seems that some race is causing the interrupts to not be reenabled otherwise with the end result that networking just stops working. Enabling interrupts after calling napi_complete is more in line with what other drivers do. Signed-off-by:
-
Jonas Bonn authored
Signed-off-by:
-
Jonas Bonn authored
This patch adds the ability to describe ethernet devices via a flattened device tree. As device tree remains an optional feature, these bits all need to be guarded by CONFIG_OF ifdefs. MAC address is settable via the device tree parameter "local-mac-address"; however, the selection of the phy id is limited to probing, for now. Signed-off-by:
-
andrew hendry authored
Signed-off-by:
Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by:
-
andrew hendry authored
Signed-off-by:
-
andrew hendry authored
Signed-off-by:
-
andrew hendry authored
Signed-off-by:
-
andrew hendry authored
Signed-off-by:
-
Vladislav Zolotarov authored
Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Michael Chan authored
In KVM passthrough mode, the driver may not have config access to non-standard registers. The BNX2_PCICFG_MISC_CONFIG config register access to setup mailbox swapping can be done using MMIO. Update version to 2.0.20. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Eddie Wai authored
The 5709 chip requires the BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE bit to be cleared and polling for pending DMAs to complete before chip reset. Without this step, we've seen NMIs during repeated resets of the chip. Signed-off-by:
Eddie Wai <waie@broadcom.com> Signed-off-by:
-
John Fastabend authored
Now that the vlan device is lockless and single queue do not transfer the real num queues. This is causing a BUG_ON to occur. kernel BUG at net/8021q/vlan.c:345! Call Trace: [<ffffffff813fd6e8>] ? fib_rules_event+0x28/0x1b0 [<ffffffff814ad2b5>] notifier_call_chain+0x55/0x80 [<ffffffff81089156>] raw_notifier_call_chain+0x16/0x20 [<ffffffff813e5af7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff813e6756>] netdev_features_change+0x16/0x20 [<ffffffffa02995be>] ixgbe_fcoe_enable+0xae/0x100 [ixgbe] [<ffffffffa01da06a>] vlan_dev_fcoe_enable+0x2a/0x30 [8021q] [<ffffffffa02d08c3>] fcoe_create+0x163/0x630 [fcoe] [<ffffffff811244d5>] ? mmap_region+0x255/0x5a0 [<ffffffff81080ef0>] param_attr_store+0x50/0x80 [<ffffffff810809b6>] module_attr_store+0x26/0x30 [<ffffffff811b9db2>] sysfs_write_file+0xf2/0x180 [<ffffffff8114fc88>] vfs_write+0xc8/0x190 [<ffffffff81150621>] sys_write+0x51/0x90 [<ffffffff8100c0b2>] system_call_fastpath+0x16/0x1b Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Eric Dumazet authored
When testing struct netdev_queue state against FROZEN bit, we also test XOFF bit. We can test both bits at once and save some cycles. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Shan Wei authored
1. IPV6_TLV_TEL_DST_SIZE This has not been using for several years since created. 2. RT6_INFO_LEN commit 33120b30 kill all RT6_INFO_LEN's references, but only this definition remained. commit 33120b30 Author: Alexey Dobriyan <adobriyan@sw.ru> Date: Tue Nov 6 05:27:11 2007 -0800 [IPV6]: Convert /proc/net/ipv6_route to seq_file interface Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Uwe Kleine-König authored
Cc: netdev@vger.kernel.org Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Rajesh Borundia authored
In kdump environment do not depend on reset_devices parameter to reset the device as the parameter may become obsolete. Instead use an adapter specific mechanism to determine if the device needs a reset. Driver maintains a count of number of pci functions probed and decrements the count when remove handler of that pci function is called. If the first probe, probe of function 0, detects the count as non zero then reset the device. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
In kdump environment do not depend upon reset_devices parameter to reset the pci function as this parameter may become obsolete. Instead use an adapter specific mechanism to determine if the pci function needs to be reset. Per function refcount is maintained in driver, which is set in probe and reset in remove handler of adapter. If the probe detects the count as non zero then reset the function. Signed-off-by:
-
Shan Wei authored
These macros have been existed for several years since v2.6.12-rc2. But they never be used. So remove them now. Signed-off-by:
-
