- 25 Aug, 2021 13 commits
-
-
James Smart authored
When congestion management is enabled, issue EDC ELS to register congestion signaling capabilities with the fabric. The response handling will process the fabric parameters and set the reporting parameters. Similarly, add support for receiving an EDC request from the fabric generating a corresponding response. Implement handlers for congestion signals from the fabric and maintain statistics for them. Link: https://lore.kernel.org/r/20210816162901.121235-6-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Expand FPIN logging: - Display Attached Port Names for Link Integrity and Peer Congestion events - Log Delivery, Peer Congestion, and Congestion events - Sanity check FPIN descriptor lengths when processing FPIN descriptors. Log RDF events when congestion logging is enabled. Link: https://lore.kernel.org/r/20210816162901.121235-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
MIB support is currently limited to detecting support in the adapter and ensuring FDMI support is enabled if present. For the new framework MIB support also requires active enablement of support via the SET_FEATURES command with the firmware. Rework the MIB detection and enablement for the following: - Move detection away from the get_sli4_parameters routine, and into the hba_setup path. get_sli4_parameters is only called once at attachment while hba_setup is called as part of any SLI port reset path. This ensures detection after firmware download. - Update SET_FEATURES mbx command for the MIB enablement feature and add support for the feature. - Create the cmf_setup routine to encapsulate the detection of MIB support and perform the enablement of the MIB support feature. Link: https://lore.kernel.org/r/20210816162901.121235-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Implement the SET_HOST_DATA mbox command to set date / time during initialization. It is used by the firmware for various purposes including congestion management and firmware dumps. Link: https://lore.kernel.org/r/20210816162901.121235-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Add Exchange Diagnostic Capabilities (EDC) ELS definition and the following capability descriptors: - Link Fault Capability Descriptor - Congestion Signaling Capability Descriptor Definitions taken from FC-LS-5 r5.01 Link: https://lore.kernel.org/r/20210816162901.121235-2-jsmart2021@gmail.comSigned-off-by:
-
Keoseong Park authored
Change "allcation" to "allocation". Link: https://lore.kernel.org/r/1891546521.01629282781634.JavaMail.epsvc@epcpadp4Signed-off-by:
Keoseong Park <keosung.park@samsung.com> Signed-off-by:
-
Kashyap Desai authored
Driver is not setting up IRQs in the resume path. As a result, hibernation path is broken and controller will not be operational after system is resumed. Set up IRQs to handle the hibernation case. Link: https://lore.kernel.org/r/20210818081755.1274470-1-kashyap.desai@broadcom.com Cc: sathya.prakash@broadcom.com Cc: thenzl@redhat.com Reported-by:
Marco Patalano <mpatalan@redhat.com> Tested-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
Halil Pasic authored
Link: https://lore.kernel.org/r/20210823133458.3536824-1-pasic@linux.ibm.com Fixes: f2542a3b ("scsi: scsi_ioctl: Move the "block layer" SCSI ioctl handling to drivers/scsi") Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Signed-off-by:
-
Keoseong Park authored
When HPB pinned region exists and mctx allocation for this region fails, a memory leak is possible because memory is not released for the subregion table of the current region. Free memory for the subregion table of the current region. Link: https://lore.kernel.org/r/1891546521.01629711601304.JavaMail.epsvc@epcpadp3Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a SNIC_HOST_INFO message. Fix it. Link: https://lore.kernel.org/r/20210820151835.59804-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210820095405.12801-4-hare@suse.deReviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Hannes Reinecke authored
ncr_reset_bus() will complete all outstanding commands anyway, so there's no need to single out a specific command. Link: https://lore.kernel.org/r/20210820095405.12801-3-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Always '1', so we can remove it. Link: https://lore.kernel.org/r/20210820095405.12801-2-hare@suse.deReviewed-by:
-
- 24 Aug, 2021 17 commits
-
-
Masahiro Yamada authored
Add FORCE so that if_changed can detect the command line change. scsi_devinfo_tbl.c must be added to 'targets' too. Link: https://lore.kernel.org/r/20210819012339.709409-1-masahiroy@kernel.orgSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
John Garry authored
Use scsi_cmd_to_rq(cmd)->tag instead of scsi_cmnd.tag as preference. Link: https://lore.kernel.org/r/1629294801-32102-2-git-send-email-john.garry@huawei.comReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Hannes Reinecke authored
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and remove the now obsolete function __qla2xxx_eh_generic_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-4-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Hannes Reinecke authored
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-3-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by:
-
Hannes Reinecke authored
When calling bus reset the driver will be doing a full SAN resync, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway. Link: https://lore.kernel.org/r/20210819091913.94436-2-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by:
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20210817051315.2477-13-njavali@marvell.comSigned-off-by:
-
kernel test robot authored
drivers/scsi/qla2xxx/qla_edif.c:213:25-29: Unneeded variable: "rval". Return "0" on line 264 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Link: https://lore.kernel.org/r/20210817051315.2477-12-njavali@marvell.com Fixes: 7ebb336e ("scsi: qla2xxx: edif: Add start + stop bsgs") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Quinn Tran authored
When Target port transitions personality from one to another (NVMe <--> FCP), there could be some overlap of the two where one layer is going down while the other layer is coming up. This overlap can cause temporary I/O error. Detect those errors/transitions and recover from them. Triggers session tear down and allow relogin to re-drive the connection under the following conditions: - NVMe command error - On PRLO + N2N (rida format 2) Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
For target port that register itself as both FCP + NVMe, initiator driver will try to login one mode at a time. If the last mode did not succeed, then driver will try the other mode. When error is encountered, current code only flip to other mode one time (NVMe->FCP) and remain on the last mode. Driver wrongly assumed target port does not support PRLI NVMe, instead it was not ready to receive PRLI. This patch will alternate back and forth on every PRLI failure until login retry count has depleted or it is succeeded. Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.comSigned-off-by:
-
Arun Easi authored
The abort callback gets called only when it gets posted to firmware. The refcounting is done properly in the callback. On internal errors, the callback is not invoked leading to a hung I/O. Fix this by having separate error code when command gets returned from firmware. Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.comSigned-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Quinn Tran authored
Currently driver saves the personality type (FCP|NVMe) at the start of first discovery of the remote device. If the remote device personality do change over time, then qla driver needs to present that to user to decide. Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
For initiator mode, always do secure login when authentication app started. Also remove redundant flags to indicate secure connection. Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.comSigned-off-by:
-
Arun Easi authored
The following hung task call trace was seen: [ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds. [ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000 [ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx] [ 1230.205639] Call Trace: [ 1230.208100] __schedule+0x2c4/0x700 [ 1230.211607] schedule+0x38/0xa0 [ 1230.214769] schedule_timeout+0x246/0x2f0 [ 1230.222651] wait_for_completion+0x97/0x100 [ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx] [ 1230.232254] process_one_work+0x1a7/0x360 ...when device side port resets were done. Abort threads were getting out without processing due to the "deleted" flag check. The delete thread, meanwhile, could not proceed with a logout (that would have cleared out pending requests) as the logout IOCB work was not progressing. It appears like the hung qlt_free_session_done() thread is causing the ha->wq works on hold. The qlt_free_session_done() was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb to be complete, which would only happen when all I/Os are released. Fix this by allowing abort to progress until device delete is completely done. This should make the qlt_free_session_done() proceed without hang and thus clear up the deadlock. Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.comSigned-off-by: -
Quinn Tran authored
edif_enabled is prematurely turned on if hardware is capable of handling the feature. However, firmware also needs to support EDIF before enabling this bit. Link: https://lore.kernel.org/r/20210817051315.2477-4-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
Reject inflight AUTH ELS if driver is going through session recovery. Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
When firmware indicates session has been torn down via UPDATE SA IOCB or ELS Passthrough IOCB, the driver needs to also tear down the session. Link: https://lore.kernel.org/r/20210817051315.2477-2-njavali@marvell.comSigned-off-by:
-
- 18 Aug, 2021 8 commits
-
-
Christian Loehle authored
The sd_spinup_disk() function logs what is happening. Unfortunately this output stops if the media was marked as removed in the meantime. Add a print for this case too. Link: https://lore.kernel.org/r/CWXP265MB26803209FD08A64222EEEA02C4FD9@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COMReviewed-by:
Christian Loehle <cloehle@hyperstone.com> Signed-off-by:
-
Hannes Reinecke authored
The initial device scan might take some time, and there really is no need to wait for it during probe(). So return immediately from scsi_scan_host() during probe() and avoid any udev stalls during booting. Link: https://lore.kernel.org/r/20210817075306.11315-1-mwilck@suse.comAcked-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Sergey Samoylenko authored
TCM fails to pass the following tests in libiscsi: SCSI.ExtendedCopy.DescrType SCSI.ExtendedCopy.DescrLimits SCSI.ExtendedCopy.ParamHdr SCSI.ExtendedCopy.ValidSegDescr SCSI.ExtendedCopy.ValidTgtDescr The xcopy code always returns the same NOT READY sense key for all detected errors. Change the sense key for invalid requests to ILLEGAL REQUEST, and for aborted transfers to COPY ABORTED. Link: https://lore.kernel.org/r/20210803145410.80147-3-s.samoylenko@yadro.com Fixes: d877d727 ("target: Fix a deadlock between the XCOPY code and iSCSI session shutdown") Reviewed-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by:
-
Sergey Samoylenko authored
Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE. Add a new helper that allows backend drivers to fail with specific sense codes. This is based on a patch from Mike Christie <michael.christie@oracle.com>. Cc: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.comReviewed-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code a bit according to the use of a flexible-array member in struct pqi_event_config instead of a one-element array, and use the struct_size() helper. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/20210810210741.GA58765@embeddedorSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Tuo Li authored
The return value of transport_kmap_data_sg() is assigned to the variable buf: buf = transport_kmap_data_sg(cmd); And then it is checked: if (!buf) { This indicates that buf can be NULL. However, it is dereferenced in the following statements: if (!(buf[3] & 0x80)) buf[3] |= 0x80; if (!(buf[2] & 0x80)) buf[2] |= 0x80; To fix these possible null-pointer dereferences, dereference buf and call transport_kunmap_data_sg() only when buf is not NULL. Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.comReported-by:TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Tuo Li <islituo@gmail.com> Signed-off-by:
-
John Garry authored
It is never read, so get rid of it. Link: https://lore.kernel.org/r/1628862553-179450-4-git-send-email-john.garry@huawei.comReviewed-by:
-
John Garry authored
Use scsi_cmd_to_rq(scsi_cmnd)->tag in preference to scsi_cmnd.tag. Link: https://lore.kernel.org/r/1629207817-211936-1-git-send-email-john.garry@huawei.comSigned-off-by:
-
- 16 Aug, 2021 2 commits
-
-
John Garry authored
It is never read. Setting it and the request tag seems dodgy anyway. Link: https://lore.kernel.org/r/1628862553-179450-3-git-send-email-john.garry@huawei.comReviewed-by:
-
John Garry authored
Use scsi_cmd_to_rq(cmd)->tag instead. Link: https://lore.kernel.org/r/1628862553-179450-2-git-send-email-john.garry@huawei.comReviewed-by:
-
