- 17 Sep, 2014 1 commit
-
-
Jeff Mahoney authored
commit 27d0e5bc upstream. Commits f1f007c3 (reiserfs: balance_leaf refactor, pull out balance_leaf_insert_left) and cf22df18 (reiserfs: balance_leaf refactor, pull out balance_leaf_paste_left) missed that the `body' pointer was getting repositioned. Subsequent users of the pointer would expect it to be repositioned, and as a result, parts of the tree would get overwritten. The most common observed corruption is indirect block pointers being overwritten. Since the body value isn't actually used anymore in the called routines, we can pass back the offset it should be shifted. We constify the body and ih pointers in the balance_leaf as a mostly-free preventative measure. Reported-and-tested-by:
Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 Sep, 2014 39 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
commit a9ef803d upstream. commit bdd405d2 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Michael Welling <mwelling@emacinc.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Oleg Nesterov authored
commit 4449a51a upstream. Aleksei hit the soft lockup during reading /proc/PID/smaps. David investigated the problem and suggested the right fix. while_each_thread() is racy and should die, this patch updates vm_is_stack(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Aleksei Besogonov <alex.besogonov@gmail.com> Tested-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
commit aee7af35 upstream. In the presence of delegations, we can no longer assume that the state->n_rdwr, state->n_rdonly, state->n_wronly reflect the open stateid share mode, and so we need to calculate the initial value for calldata->arg.fmode using the state->flags. Reported-by:
James Drews <drews@engr.wisc.edu> Fixes: 88069f77 (NFSv41: Fix a potential state leakage when...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 412f6c4c upstream. If we did an OPEN_DOWNGRADE, then the right thing to do on success, is to apply the new open mode to the struct nfs4_state. Instead, we were unconditionally clearing the state, making it appear to our state machinery as if we had just performed a CLOSE. Fixes: 226056c5 (NFSv4: Use correct locking when updating nfs4_state...) Signed-off-by:
-
Trond Myklebust authored
commit f87d928f upstream. When creating a new object on the NFS server, we should not be sending posix setacl requests unless the preceding posix_acl_create returned a non-trivial acl. Doing so, causes Solaris servers in particular to return an EINVAL. Fixes: 013cdf10 (nfs: use generic posix ACL infrastructure,,,) Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132786Signed-off-by:
-
Chuck Lever authored
commit 3c45ddf8 upstream. The current code always selects XPRT_TRANSPORT_BC_TCP for the back channel, even when the forward channel was not TCP (eg, RDMA). When a 4.1 mount is attempted with RDMA, the server panics in the TCP BC code when trying to send CB_NULL. Instead, construct the transport protocol number from the forward channel transport or'd with XPRT_TRANSPORT_BC. Transports that do not support bi-directional RPC will not have registered a "BC" transport, causing create_backchannel_client() to fail immediately. Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Scott Mayhew authored
commit 71a6ec8a upstream. Commit c8e47028 made it possible to change resvport/noresvport and sharecache/nosharecache via a remount operation, neither of which should be allowed. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Fixes: c8e47028 (nfs: Apply NFS_MOUNT_CMP_FLAGMASK to nfs_compare_remount_data) Signed-off-by:
-
Andrey Utkin authored
commit 7a9e75a1 upstream. There was a check for result being not NULL. But get_acl() may return NULL, or ERR_PTR, or actual pointer. The purpose of the function where current change is done is to "list ACLs only when they are available", so any error condition of get_acl() mustn't be elevated, and returning 0 there is still valid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81111Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Fixes: 74adf83f (nfs: only show Posix ACLs in listxattr if actually...) Signed-off-by:
-
Kinglong Mee authored
commit d9499a95 upstream. A memory allocation failure could cause nfsd_startup_generic to fail, in which case nfsd_users wouldn't be incorrectly left elevated. After nfsd restarts nfsd_startup_generic will then succeed without doing anything--the first consequence is likely nfs4_start_net finding a bad laundry_wq and crashing. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Fixes: 4539f149 "nfsd: replace boolean nfsd_up flag by users counter" Signed-off-by:
-
Takashi Iwai authored
commit dd5f5006 upstream. The commit [5ee0f803: usbcore: don't log on consecutive debounce failures of the same port] added the check of the reliable port, but it also replaced the device argument to dev_err() wrongly, which leads to a NULL dereference. This patch restores the right device, port_dev->dev. Also, since dev_err() itself shows the port number, reduce the port number shown in the error message, essentially reverting to the state before the commit 5ee0f803. [The fix suggested by Hannes, and the error message cleanup suggested by Alan Stern] Fixes: 5ee0f803 ('usbcore: don't log on consecutive debounce failures of the same port') Reported-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Roger Quadros authored
commit bdd405d2 upstream. If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a "USB: set hub's default autosuspend delay as 0" Signed-off-by:
Roger Quadros <rogerq@ti.com> Tested-by:
Michael Welling <mwelling@emacinc.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Peter Chen authored
commit 5cbcc35e upstream. The roothub's index per controller is from 0, but the hub port index per hub is from 1, this patch fixes "can't find device at roohub" problem for connecting test fixture at roohub when do USB-IF Embedded Host High-Speed Electrical Test. This patch is for v3.12+. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Acked-by:
-
James Forshaw authored
commit 6817ae22 upstream. This patch fixes a potential security issue in the whiteheat USB driver which might allow a local attacker to cause kernel memory corrpution. This is due to an unchecked memcpy into a fixed size buffer (of 64 bytes). On EHCI and XHCI busses it's possible to craft responses greater than 64 bytes leading a buffer overflow. Signed-off-by:
James Forshaw <forshaw@google.com> Signed-off-by:
-
Jaša Bartelj authored
commit 646907f5 upstream. Added support to the ftdi_sio driver for ekey Converter USB which uses an FT232BM chip. Signed-off-by:
Jaša Bartelj <jasa.bartelj@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 6552cc7f upstream. Add device id for Basic Micro ATOM Nano USB2Serial adapters. Reported-by:
Nicolas Alt <n.alt@mytum.de> Tested-by:
-
Tony Lindgren authored
commit cc824534 upstream. Looks like MUSB cable removal can cause wake-up interrupts to stop working for device tree based booting at least for UART3 even as nothing is dynamically remuxed. This can be fixed by calling reconfigure_io_chain() for device tree based booting in hwmod code. Note that we already do that for legacy booting if the legacy mux is configured. My guess is that this is related to UART3 and MUSB ULPI hsusb0_data0 and hsusb0_data1 support for Carkit mode that somehow affect the configured IO chain for UART3 and require rearming the wake-up interrupts. In general, for device tree based booting, pinctrl-single calls the rearm hook that in turn calls reconfigure_io_chain so calling reconfigure_io_chain should not be needed from the hwmod code for other events. So let's limit the hwmod rearming of iochain only to HWMOD_FORCE_MSTANDBY where MUSB is currently the only user of it. If we see other devices needing similar changes we can add more checks for it. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Hans de Goede authored
commit e21eba05 upstream. This is a bit bigger hammer then I would like to use for this, but for now it will have to make do. I'm working on getting my hands on one of these so that I can try to get streams to work (with a quirk flag if necessary) and then we can re-enable them. For now this at least makes uas capable disk enclosures work again by forcing fallback to the usb-storage driver. https://bugzilla.kernel.org/show_bug.cgi?id=79511Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 365038d8 upstream. When we manually need to move the TR dequeue pointer we need to set the correct cycle bit as well. Previously we used the trb pointer from the last event received as a base, but this was changed in commit 1f81b6d2 ("usb: xhci: Prefer endpoint context dequeue pointer") to use the dequeue pointer from the endpoint context instead It turns out some Asmedia controllers advance the dequeue pointer stored in the endpoint context past the event triggering TRB, and this messed up the way the cycle bit was calculated. Instead of adding a quirk or complicating the already hard to follow cycle bit code, the whole cycle bit calculation is now simplified and adapted to handle event and endpoint context dequeue pointer differences. Fixes: 1f81b6d2 ("usb: xhci: Prefer endpoint context dequeue pointer") Reported-by:
Maciej Puzio <mx34567@gmail.com> Reported-by:
Evan Langlois <uudruid74@gmail.com> Reviewed-by:
Julius Werner <jwerner@chromium.org> Tested-by:
-
Huang Rui authored
commit 2597fe99 upstream. AMD xHC also needs short tx quirk after tested on most of chipset generations. That's because there is the same incorrect behavior like Fresco Logic host. Please see below message with on USB webcam attached on xHC host: [ 139.262944] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.266934] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.270913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.274937] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.278914] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.282936] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.286915] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.290938] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.294913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.298917] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? Reported-by:
Arindam Nath <arindam.nath@amd.com> Tested-by:
Shriraj-Rai P <shriraj-rai.p@amd.com> Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Hans de Goede authored
commit 9a548863 upstream. When using a Renesas uPD720231 chipset usb-3 uas to sata bridge with a 120G Crucial M500 ssd, model string: Crucial_ CT120M500SSD1, together with a the integrated Intel xhci controller on a Haswell laptop: 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) The following error gets logged to dmesg: xhci error: Transfer event TRB DMA ptr not part of current TD Treating COMP_STOP the same as COMP_STOP_INVAL when no event_seg gets found fixes this. Signed-off-by:
-
Larry Finger authored
commit a2fa6721 upstream. The Elecom WDC-150SU2M uses this chip. Reported-by:
Hiroki Kondo <kompiro@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Holger Paradies authored
commit 8626d524 upstream. The stick is not recognized. This dongle uses r8188eu but usb-id is missing. 3.16.0 Signed-off-by:
Holger Paradies <retabell@gmx.de> Signed-off-by:
-
Mark Einon authored
commit ec0a38bf upstream. Fix two reported bugs, caused by et131x_adapter->phydev->addr being accessed before it is initialised, by: - letting et131x_mii_write() take a phydev address, instead of using the one stored in adapter by default. This is so et131x_mdio_write() can use it's own addr value. - removing implementation of et131x_mdio_reset(), as it's not needed. - moving a call to et131x_disable_phy_coma() in et131x_pci_setup(), which uses phydev->addr, until after the mdiobus has been registered. Link: https://bugzilla.kernel.org/show_bug.cgi?id=80751 Link: https://bugzilla.kernel.org/show_bug.cgi?id=77121Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Pranith Kumar authored
commit e409842a upstream. The following patch fixes a build error on sparc32. I think it should go to stable 3.16. Remove a circular dependency on atomic.h header file which leads to compilation failure on sparc32 as reported here: http://kisskb.ellerman.id.au/kisskb/buildresult/11340509/ The specific dependency is as follows: In file included from arch/sparc/include/asm/smp_32.h:24:0, from arch/sparc/include/asm/smp.h:6, from arch/sparc/include/asm/switch_to_32.h:4, from arch/sparc/include/asm/switch_to.h:6, from arch/sparc/include/asm/ptrace.h:84, from arch/sparc/include/asm/processor_32.h:16, from arch/sparc/include/asm/processor.h:6, from arch/sparc/include/asm/barrier_32.h:4, from arch/sparc/include/asm/barrier.h:6, from arch/sparc/include/asm/atomic_32.h:17, from arch/sparc/include/asm/atomic.h:6, from drivers/staging/lustre/lustre/obdclass/class_obd.c:38 Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Signed-off-by:
-
Darrick J. Wong authored
commit db9ee220 upstream. It turns out that there are some serious problems with the on-disk format of journal checksum v2. The foremost is that the function to calculate descriptor tag size returns sizes that are too big. This causes alignment issues on some architectures and is compounded by the fact that some parts of jbd2 use the structure size (incorrectly) to determine the presence of a 64bit journal instead of checking the feature flags. Therefore, introduce journal checksum v3, which enlarges the descriptor block tag format to allow for full 32-bit checksums of journal blocks, fix the journal tag function to return the correct sizes, and fix the jbd2 recovery code to use feature flags to determine 64bitness. Add a few function helpers so we don't have to open-code quite so many pieces. Switching to a 16-byte block size was found to increase journal size overhead by a maximum of 0.1%, to convert a 32-bit journal with no checksumming to a 32-bit journal with checksum v3 enabled. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reported-by:
TR Reardon <thomas_reardon@hotmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Darrick J. Wong authored
commit 022eaa75 upstream. When recovering the journal, don't fall into an infinite loop if we encounter a corrupt journal block. Instead, just skip the block and return an error, which fails the mount and thus forces the user to run a full filesystem fsck. Signed-off-by:
-
Darrick J. Wong authored
commit d80d448c upstream. When performing a same-directory rename, it's possible that adding or setting the new directory entry will cause the directory to overflow the inline data area, which causes the directory to be converted to an extent-based directory. Under this circumstance it is necessary to re-read the directory when deleting the old dirent because the "old directory" context still points to i_block in the inode table, which is now an extent tree root! The delete fails with an FS error, and the subsequent fsck complains about incorrect link counts and hardlinked directories. Test case (originally found with flat_dir_test in the metadata_csum test program): # mkfs.ext4 -O inline_data /dev/sda # mount /dev/sda /mnt # mkdir /mnt/x # touch /mnt/x/changelog.gz /mnt/x/copyright /mnt/x/README.Debian # sync # for i in /mnt/x/*; do mv $i $i.longer; done # ls -la /mnt/x/ total 0 -rw-r--r-- 1 root root 0 Aug 25 12:03 changelog.gz.longer -rw-r--r-- 1 root root 0 Aug 25 12:03 copyright -rw-r--r-- 1 root root 0 Aug 25 12:03 copyright.longer -rw-r--r-- 1 root root 0 Aug 25 12:03 README.Debian.longer (Hey! Why are there four files now??) Signed-off-by:
-
Dmitry Monakhov authored
commit 6603120e upstream. In case of delalloc block i_disksize may be less than i_size. So we have to update i_disksize each time we allocated and submitted some blocks beyond i_disksize. We weren't doing this on the error paths, so fix this. testcase: xfstest generic/019 Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Dmitry Monakhov authored
commit c174e6d6 upstream. After commit f282ac19 we use different transactions for preallocation and i_disksize update which result in complain from fsck after power-failure. spotted by generic/019. IMHO this is regression because fs becomes inconsistent, even more 'e2fsck -p' will no longer works (which drives admins go crazy) Same transaction requirement applies ctime,mtime updates testcase: xfstest generic/019 Signed-off-by:
-
Dmitry Monakhov authored
commit 69dc9536 upstream. Currently we reserve only 4 blocks but in worst case scenario ext4_zero_partial_blocks() may want to zeroout and convert two non adjacent blocks. Signed-off-by:
-
Dmitry Monakhov authored
commit 4631dbf6 upstream. Signed-off-by:
-
Alexander Usyskin authored
commit 8e8248b1 upstream. NFC will leak buffer if send failed. Use single exit point that does the freeing Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Alexander Usyskin authored
commit 73ab4232 upstream. If connect request is queued (e.g. device in pg) set client state to initializing, thus avoid preliminary exit in wait if current state is disconnected. This is regression from: commit e4d8270e Author: Alexander Usyskin <alexander.usyskin@intel.com> mei: set connecting state just upon connection request is sent to the fw Signed-off-by:
-
Liu Bo authored
commit 9e0af237 upstream. This has been reported and discussed for a long time, and this hang occurs in both 3.15 and 3.16. Btrfs now migrates to use kernel workqueue, but it introduces this hang problem. Btrfs has a kind of work queued as an ordered way, which means that its ordered_func() must be processed in the way of FIFO, so it usually looks like -- normal_work_helper(arg) work = container_of(arg, struct btrfs_work, normal_work); work->func() <---- (we name it work X) for ordered_work in wq->ordered_list ordered_work->ordered_func() ordered_work->ordered_free() The hang is a rare case, first when we find free space, we get an uncached block group, then we go to read its free space cache inode for free space information, so it will file a readahead request btrfs_readpages() for page that is not in page cache __do_readpage() submit_extent_page() btrfs_submit_bio_hook() btrfs_bio_wq_end_io() submit_bio() end_workqueue_bio() <--(ret by the 1st endio) queue a work(named work Y) for the 2nd also the real endio() So the hang occurs when work Y's work_struct and work X's work_struct happens to share the same address. A bit more explanation, A,B,C -- struct btrfs_work arg -- struct work_struct kthread: worker_thread() pick up a work_struct from @worklist process_one_work(arg) worker->current_work = arg; <-- arg is A->normal_work worker->current_func(arg) normal_work_helper(arg) A = container_of(arg, struct btrfs_work, normal_work); A->func() A->ordered_func() A->ordered_free() <-- A gets freed B->ordered_func() submit_compressed_extents() find_free_extent() load_free_space_inode() ... <-- (the above readhead stack) end_workqueue_bio() btrfs_queue_work(work C) B->ordered_free() As if work A has a high priority in wq->ordered_list and there are more ordered works queued after it, such as B->ordered_func(), its memory could have been freed before normal_work_helper() returns, which means that kernel workqueue code worker_thread() still has worker->current_work pointer to be work A->normal_work's, ie. arg's address. Meanwhile, work C is allocated after work A is freed, work C->normal_work and work A->normal_work are likely to share the same address(I confirmed this with ftrace output, so I'm not just guessing, it's rare though). When another kthread picks up work C->normal_work to process, and finds our kthread is processing it(see find_worker_executing_work()), it'll think work C as a collision and skip then, which ends up nobody processing work C. So the situation is that our kthread is waiting forever on work C. Besides, there're other cases that can lead to deadlock, but the real problem is that all btrfs workqueue shares one work->func, -- normal_work_helper, so this makes each workqueue to have its own helper function, but only a wraper pf normal_work_helper. With this patch, I no long hit the above hang. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Chris Mason authored
commit f6dc45c7 upstream. We should only be flushing on close if the file was flagged as needing it during truncate. I broke this with my ordered data vs transaction commit deadlock fix. Thanks to Miao Xie for catching this. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Reported-by:
-
Liu Bo authored
commit 38c1c2e4 upstream. The crash is ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:2124! [...] Workqueue: btrfs-endio normal_work_helper [btrfs] RIP: 0010:[<ffffffffa02d6055>] [<ffffffffa02d6055>] end_bio_extent_readpage+0xb45/0xcd0 [btrfs] This is in fact a regression. It is because we forgot to increase @offset properly in reading corrupted block, so that the @offset remains, and this leads to checksum errors while reading left blocks queued up in the same bio, and then ends up with hiting the above BUG_ON. Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
-
Chris Mason authored
commit 8d875f95 upstream. Truncates and renames are often used to replace old versions of a file with new versions. Applications often expect this to be an atomic replacement, even if they haven't done anything to make sure the new version is fully on disk. Btrfs has strict flushing in place to make sure that renaming over an old file with a new file will fully flush out the new file before allowing the transaction commit with the rename to complete. This ordering means the commit code needs to be able to lock file pages, and there are a few paths in the filesystem where we will try to end a transaction with the page lock held. It's rare, but these things can deadlock. This patch removes the ordered flushes and switches to a best effort filemap_flush like ext4 uses. It's not perfect, but it should fix the deadlocks. Signed-off-by:
-
Liu Bo authored
commit ce62003f upstream. When failing to allocate space for the whole compressed extent, we'll fallback to uncompressed IO, but we've forgotten to redirty the pages which belong to this compressed extent, and these 'clean' pages will simply skip 'submit' part and go to endio directly, at last we got data corruption as we write nothing. Signed-off-by:
Martin Steigerwald <martin@lichtvoll.de> Signed-off-by:
-
