1. 22 Mar, 2013 2 commits
    • Jan Beulich's avatar
      xen-pciback: notify hypervisor about devices intended to be assigned to guests · 909b3fdb
      Jan Beulich authored
      For MSI-X capable devices the hypervisor wants to write protect the
      MSI-X table and PBA, yet it can't assume that resources have been
      assigned to their final values at device enumeration time. Thus have
      pciback do that notification, as having the device controlled by it is
      a prerequisite to assigning the device to guests anyway.
      
      This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI:
      add mechanism to fully protect MSI-X table from PV guest accesses") on
      the master branch of git://xenbits.xen.org/xen.git.
      
      CC: stable@vger.kernel.org
      Signed-off-by: default avatarJan Beulich <jbeulich@suse.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      909b3fdb
    • Konrad Rzeszutek Wilk's avatar
      xen/acpi-processor: Don't dereference struct acpi_processor on all CPUs. · 949dd8c1
      Konrad Rzeszutek Wilk authored
      With git commit c705c78c
      "acpi: Export the acpi_processor_get_performance_info" we are now
      using a different mechanism to access the P-states.
      
      The acpi_processor per-cpu structure is set and filtered by the
      core ACPI code which shrinks the per_cpu contents to only online CPUs.
      In the past we would call acpi_processor_register_performance()
      which would have not tried to dereference offline cpus.
      
      With the new patch and the fact that the loop we take is for
      for_all_possible_cpus we end up crashing on some machines.
      We could modify the loop to be for online_cpus - but all the other
      loops in the code use possible_cpus (for a good reason) - so lets
      leave it as so and just check if per_cpu(processor) is NULL.
      
      With this patch we will bypass the !online but possible CPUs.
      This fixes:
      
      IP: [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor]
      PGD 4126e6067 PUD 4126e3067 PMD 0
      Oops: 0002 [#1] SMP
      Pid: 432, comm: modprobe Not tainted 3.9.0-rc3+ #28 To be filled by O.E.M. To be filled by O.E.M./M5A97
      RIP: e030:[<ffffffffa00d13b5>]  [<ffffffffa00d13b5>] xen_acpi_processor_init+0x1b6/0xe01 [xen_acpi_processor]
      RSP: e02b:ffff88040c8a3ce8  EFLAGS: 00010282
      .. snip..
      Call Trace:
       [<ffffffffa00d11ff>] ? read_acpi_id+0x12b/0x12b [xen_acpi_processor]
       [<ffffffff8100215a>] do_one_initcall+0x12a/0x180
       [<ffffffff810c42c3>] load_module+0x1cd3/0x2870
       [<ffffffff81319b70>] ? ddebug_proc_open+0xc0/0xc0
       [<ffffffff810c4f37>] sys_init_module+0xd7/0x120
       [<ffffffff8166ce19>] system_call_fastpath+0x16/0x1b
      
      on some machines.
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      949dd8c1
  2. 11 Mar, 2013 2 commits
    • Liu Jinsong's avatar
      xen/acpi: remove redundant acpi/acpi_drivers.h include · d2e0bca3
      Liu Jinsong authored
      It's redundant since linux/acpi.h has include it when CONFIG_ACPI enabled,
      and when CONFIG_ACPI disabled it will trigger compiling warning
      
      In file included from drivers/xen/xen-stub.c:28:0:
      include/acpi/acpi_drivers.h:103:31:
      warning: 'struct acpi_device' declared inside parameter list [enabled by default]
      include/acpi/acpi_drivers.h:103:31:
      warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
      include/acpi/acpi_drivers.h:107:43:
      warning: 'struct acpi_pci_root' declared inside parameter list [enabled by default]
      Reported-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: default avatarLiu Jinsong <jinsong.liu@intel.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      d2e0bca3
    • Ian Campbell's avatar
      xen: arm: mandate EABI and use generic atomic operations. · 85323a99
      Ian Campbell authored
      Rob Herring has observed that c81611c4 "xen: event channel arrays are
      xen_ulong_t and not unsigned long" introduced a compile failure when building
      without CONFIG_AEABI:
      
      /tmp/ccJaIZOW.s: Assembler messages:
      /tmp/ccJaIZOW.s:831: Error: even register required -- `ldrexd r5,r6,[r4]'
      
      Will Deacon pointed out that this is because OABI does not require even base
      registers for 64-bit values. We can avoid this by simply using the existing
      atomic64_xchg operation and the same containerof trick as used by the cmpxchg
      macros. However since this code is used on memory which is shared with the
      hypervisor we require proper atomic instructions and cannot use the generic
      atomic64 callbacks (which are based on spinlocks), therefore add a dependency
      on !GENERIC_ATOMIC64. Since we already depend on !CPU_V6 there isn't much
      downside to this.
      
      While thinking about this we also observed that OABI has different struct
      alignment requirements to EABI, which is a problem for hypercall argument
      structs which are shared with the hypervisor and which must be in EABI layout.
      Since I don't expect people to want to run OABI kernels on Xen depend on
      CONFIG_AEABI explicitly too (although it also happens to be enforced by the
      !GENERIC_ATOMIC64 requirement too).
      Signed-off-by: default avatarIan Campbell <ian.campbell@citrix.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Rob Herring <robherring2@gmail.com>
      Acked-by: default avatarStefano Stabellini <Stefano.Stabellini@eu.citrix.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      85323a99
  3. 06 Mar, 2013 2 commits
    • Konrad Rzeszutek Wilk's avatar
      acpi: Export the acpi_processor_get_performance_info · c705c78c
      Konrad Rzeszutek Wilk authored
      The git commit d5aaffa9
      (cpufreq: handle cpufreq being disabled for all exported function)
      tightens the cpufreq API by returning errors when disable_cpufreq()
      had been called.
      
      The problem we are hitting is that the module xen-acpi-processor which
      uses the ACPI's functions: acpi_processor_register_performance,
      acpi_processor_preregister_performance, and acpi_processor_notify_smm
      fails at acpi_processor_register_performance with -22.
      
      Note that earlier during bootup in arch/x86/xen/setup.c there is also
      an call to cpufreq's API: disable_cpufreq().
      
      This is b/c we want the Linux kernel to parse the ACPI data, but leave
      the cpufreq decisions to the hypervisor.
      
      In v3.9 all the checks that d5aaffa9
      added are now hit and the calls to cpufreq_register_notifier will now
      fail. This means that acpi_processor_ppc_init ends up printing:
      
      "Warning: Processor Platform Limit not supported"
      
      and the acpi_processor_ppc_status is not set.
      
      The repercussions of that is that the call to
      acpi_processor_register_performance fails right away at:
      
      	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
      
      and we don't progress any further on parsing and extracting the _P*
      objects.
      
      The only reason the Xen code called that function was b/c it was
      exported and the only way to gather the P-states. But we can also
      just make acpi_processor_get_performance_info be exported and not
      use acpi_processor_register_performance. This patch does so.
      Acked-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      c705c78c
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Don't disable a PCI device that is already disabled. · bdc5c181
      Konrad Rzeszutek Wilk authored
      While shuting down a HVM guest with pci devices passed through we
      get this:
      
      pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002)
      ------------[ cut here ]------------
      WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0()
      Hardware name: MS-7640
      Device pciback
      disabling already-disabled device
      Modules linked in:
      Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1
      Call Trace:
       [<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0
       [<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50
       [<ffffffff813cf288>] pci_disable_device+0x88/0xa0
       [<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0
       [<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120
       [<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120
       [<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0
      
      This fixes the bug.
      
      CC: stable@vger.kernel.org
      Reported-and-Tested-by: default avatarSander Eikelenboom <linux@eikelenboom.it>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      bdc5c181
  4. 01 Mar, 2013 2 commits
    • Steven Noonan's avatar
      xenbus: fix compile failure on ARM with Xen enabled · 45e27161
      Steven Noonan authored
      Adding an include of linux/mm.h resolves this:
      	drivers/xen/xenbus/xenbus_client.c: In function ‘xenbus_map_ring_valloc_hvm’:
      	drivers/xen/xenbus/xenbus_client.c:532:66: error: implicit declaration of function ‘page_to_section’ [-Werror=implicit-function-declaration]
      
      CC: stable@vger.kernel.org
      Signed-off-by: default avatarSteven Noonan <steven@uplinklabs.net>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      45e27161
    • Konrad Rzeszutek Wilk's avatar
      xen/pci: We don't do multiple MSI's. · 884ac297
      Konrad Rzeszutek Wilk authored
      There is no hypercall to setup multiple MSI per PCI device.
      As such with these two new commits:
      -  08261d87
         PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()
      - 5ca72c4f
         AHCI: Support multiple MSIs
      
      we would call the PHYSDEVOP_map_pirq 'nvec' times with the same
      contents of the PCI device. Sander discovered that we would get
      the same PIRQ value 'nvec' times and return said values to the
      caller. That of course meant that the device was configured only
      with one MSI and AHCI would fail with:
      
      ahci 0000:00:11.0: version 3.0
      xen: registering gsi 19 triggering 0 polarity 1
      xen: --> pirq=19 -> irq=19 (gsi=19)
      (XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1)
      ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
      ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
      ahci: probe of 0000:00:11.0 failed with error -22
      
      That is b/c in ahci_host_activate the second call to
      devm_request_threaded_irq  would return -EINVAL as we passed in
      (on the second run) an IRQ that was never initialized.
      
      CC: stable@vger.kernel.org
      Reported-and-Tested-by: default avatarSander Eikelenboom <linux@eikelenboom.it>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      884ac297
  5. 28 Feb, 2013 1 commit
    • Konrad Rzeszutek Wilk's avatar
      xen/pat: Disable PAT using pat_enabled value. · c79c4982
      Konrad Rzeszutek Wilk authored
      The git commit 8eaffa67
      (xen/pat: Disable PAT support for now) explains in details why
      we want to disable PAT for right now. However that
      change was not enough and we should have also disabled
      the pat_enabled value. Otherwise we end up with:
      
      mmap-example:3481 map pfn expected mapping type write-back for
      [mem 0x00010000-0x00010fff], got uncached-minus
       ------------[ cut here ]------------
      WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0()
      mem 0x00010000-0x00010fff], got uncached-minus
      ------------[ cut here ]------------
      WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774
      untrack_pfn+0xb8/0xd0()
      ...
      Pid: 3481, comm: mmap-example Tainted: GF 3.8.0-6-generic #13-Ubuntu
      Call Trace:
       [<ffffffff8105879f>] warn_slowpath_common+0x7f/0xc0
       [<ffffffff810587fa>] warn_slowpath_null+0x1a/0x20
       [<ffffffff8104bcc8>] untrack_pfn+0xb8/0xd0
       [<ffffffff81156c1c>] unmap_single_vma+0xac/0x100
       [<ffffffff81157459>] unmap_vmas+0x49/0x90
       [<ffffffff8115f808>] exit_mmap+0x98/0x170
       [<ffffffff810559a4>] mmput+0x64/0x100
       [<ffffffff810560f5>] dup_mm+0x445/0x660
       [<ffffffff81056d9f>] copy_process.part.22+0xa5f/0x1510
       [<ffffffff81057931>] do_fork+0x91/0x350
       [<ffffffff81057c76>] sys_clone+0x16/0x20
       [<ffffffff816ccbf9>] stub_clone+0x69/0x90
       [<ffffffff816cc89d>] ? system_call_fastpath+0x1a/0x1f
      ---[ end trace 4918cdd0a4c9fea4 ]---
      
      (a similar message shows up if you end up launching 'mcelog')
      
      The call chain is (as analyzed by Liu, Jinsong):
      do_fork
        --> copy_process
          --> dup_mm
            --> dup_mmap
             	--> copy_page_range
                --> track_pfn_copy
                  --> reserve_pfn_range
                    --> line 624: flags != want_flags
      It comes from different memory types of page table (_PAGE_CACHE_WB) and MTRR
      (_PAGE_CACHE_UC_MINUS).
      
      Stefan Bader dug in this deep and found out that:
      "That makes it clearer as this will do
      
      reserve_memtype(...)
      --> pat_x_mtrr_type
        --> mtrr_type_lookup
          --> __mtrr_type_lookup
      
      And that can return -1/0xff in case of MTRR not being enabled/initialized. Which
      is not the case (given there are no messages for it in dmesg). This is not equal
      to MTRR_TYPE_WRBACK and thus becomes _PAGE_CACHE_UC_MINUS.
      
      It looks like the problem starts early in reserve_memtype:
      
             	if (!pat_enabled) {
                      /* This is identical to page table setting without PAT */
                      if (new_type) {
                              if (req_type == _PAGE_CACHE_WC)
                                      *new_type = _PAGE_CACHE_UC_MINUS;
                              else
                                     	*new_type = req_type & _PAGE_CACHE_MASK;
                     	}
                      return 0;
              }
      
      This would be what we want, that is clearing the PWT and PCD flags from the
      supported flags - if pat_enabled is disabled."
      
      This patch does that - disabling PAT.
      
      CC: stable@vger.kernel.org # 3.3 and further
      Reported-by: default avatarSander Eikelenboom <linux@eikelenboom.it>
      Reported-and-Tested-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Reported-and-Tested-by: default avatarStefan Bader <stefan.bader@canonical.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      c79c4982
  6. 25 Feb, 2013 3 commits
    • Liu Jinsong's avatar
      xen/acpi: xen cpu hotplug minor updates · 1b37d6ea
      Liu Jinsong authored
      Recently at native Rafael did some cleanup for acpi, say, drop
      acpi_bus_add, remove unnecessary argument of acpi_bus_scan,
      and run acpi_bus_scan under acpi_scan_lock.
      
      This patch does similar cleanup for xen cpu hotplug, removing
      redundant logic, and adding lock.
      Signed-off-by: default avatarLiu Jinsong <jinsong.liu@intel.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      1b37d6ea
    • Liu Jinsong's avatar
      xen/acpi: xen memory hotplug minor updates · 484400ff
      Liu Jinsong authored
      Dan Carpenter found current xen memory hotplug logic
      has potential issue: at func acpi_memory_get_device()
      *mem_device = acpi_driver_data(device);
      while the device may be NULL and then dereference.
      
      At native side, Rafael recently updated acpi_memory_get_device(),
      dropping acpi_bus_add, adding lock, and avoiding above issue.
      
      This patch updates xen memory hotplug logic accordingly, removing
      redundant logic, adding lock, and avoiding dereference.
      Signed-off-by: default avatarLiu Jinsong <jinsong.liu@intel.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      484400ff
    • Linus Torvalds's avatar
      Merge tag 'stable/for-linus-3.9-rc0-tag' of... · 77be36de
      Linus Torvalds authored
      Merge tag 'stable/for-linus-3.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
      
      Pull Xen update from Konrad Rzeszutek Wilk:
       "This has two new ACPI drivers for Xen - a physical CPU offline/online
        and a memory hotplug.  The way this works is that ACPI kicks the
        drivers and they make the appropiate hypercall to the hypervisor to
        tell it that there is a new CPU or memory.  There also some changes to
        the Xen ARM ABIs and couple of fixes.  One particularly nasty bug in
        the Xen PV spinlock code was fixed by Stefan Bader - and has been
        there since the 2.6.32!
      
        Features:
         - Xen ACPI memory and CPU hotplug drivers - allowing Xen hypervisor
           to be aware of new CPU and new DIMMs
         - Cleanups
        Bug-fixes:
         - Fixes a long-standing bug in the PV spinlock wherein we did not
           kick VCPUs that were in a tight loop.
         - Fixes in the error paths for the event channel machinery"
      
      Fix up a few semantic conflicts with the ACPI interface changes in
      drivers/xen/xen-acpi-{cpu,mem}hotplug.c.
      
      * tag 'stable/for-linus-3.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
        xen: event channel arrays are xen_ulong_t and not unsigned long
        xen: Send spinlock IPI to all waiters
        xen: introduce xen_remap, use it instead of ioremap
        xen: close evtchn port if binding to irq fails
        xen-evtchn: correct comment and error output
        xen/tmem: Add missing %s in the printk statement.
        xen/acpi: move xen_acpi_get_pxm under CONFIG_XEN_DOM0
        xen/acpi: ACPI cpu hotplug
        xen/acpi: Move xen_acpi_get_pxm to Xen's acpi.h
        xen/stub: driver for CPU hotplug
        xen/acpi: ACPI memory hotplug
        xen/stub: driver for memory hotplug
        xen: implement updated XENMEM_add_to_physmap_range ABI
        xen/smp: Move the common CPU init code a bit to prep for PVH patch.
      77be36de
  7. 24 Feb, 2013 28 commits
    • Linus Torvalds's avatar
      Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 89f88337
      Linus Torvalds authored
      Pull KVM updates from Marcelo Tosatti:
       "KVM updates for the 3.9 merge window, including x86 real mode
        emulation fixes, stronger memory slot interface restrictions, mmu_lock
        spinlock hold time reduction, improved handling of large page faults
        on shadow, initial APICv HW acceleration support, s390 channel IO
        based virtio, amongst others"
      
      * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits)
        Revert "KVM: MMU: lazily drop large spte"
        x86: pvclock kvm: align allocation size to page size
        KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr
        x86 emulator: fix parity calculation for AAD instruction
        KVM: PPC: BookE: Handle alignment interrupts
        booke: Added DBCR4 SPR number
        KVM: PPC: booke: Allow multiple exception types
        KVM: PPC: booke: use vcpu reference from thread_struct
        KVM: Remove user_alloc from struct kvm_memory_slot
        KVM: VMX: disable apicv by default
        KVM: s390: Fix handling of iscs.
        KVM: MMU: cleanup __direct_map
        KVM: MMU: remove pt_access in mmu_set_spte
        KVM: MMU: cleanup mapping-level
        KVM: MMU: lazily drop large spte
        KVM: VMX: cleanup vmx_set_cr0().
        KVM: VMX: add missing exit names to VMX_EXIT_REASONS array
        KVM: VMX: disable SMEP feature when guest is in non-paging mode
        KVM: Remove duplicate text in api.txt
        Revert "KVM: MMU: split kvm_mmu_free_page"
        ...
      89f88337
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal · 9e2d59ad
      Linus Torvalds authored
      Pull signal handling cleanups from Al Viro:
       "This is the first pile; another one will come a bit later and will
        contain SYSCALL_DEFINE-related patches.
      
         - a bunch of signal-related syscalls (both native and compat)
           unified.
      
         - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE
           (fixing several potential problems with missing argument
           validation, while we are at it)
      
         - a lot of now-pointless wrappers killed
      
         - a couple of architectures (cris and hexagon) forgot to save
           altstack settings into sigframe, even though they used the
           (uninitialized) values in sigreturn; fixed.
      
         - microblaze fixes for delivery of multiple signals arriving at once
      
         - saner set of helpers for signal delivery introduced, several
           architectures switched to using those."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits)
        x86: convert to ksignal
        sparc: convert to ksignal
        arm: switch to struct ksignal * passing
        alpha: pass k_sigaction and siginfo_t using ksignal pointer
        burying unused conditionals
        make do_sigaltstack() static
        arm64: switch to generic old sigaction() (compat-only)
        arm64: switch to generic compat rt_sigaction()
        arm64: switch compat to generic old sigsuspend
        arm64: switch to generic compat rt_sigqueueinfo()
        arm64: switch to generic compat rt_sigpending()
        arm64: switch to generic compat rt_sigprocmask()
        arm64: switch to generic sigaltstack
        sparc: switch to generic old sigsuspend
        sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE
        sparc: kill sign-extending wrappers for native syscalls
        kill sparc32_open()
        sparc: switch to use of generic old sigaction
        sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE
        mips: switch to generic sys_fork() and sys_clone()
        ...
      9e2d59ad
    • Linus Torvalds's avatar
      Merge branch 'akpm' (more incoming from Andrew) · 5ce1a70e
      Linus Torvalds authored
      Merge second patch-bomb from Andrew Morton:
      
       - A little DM fix
      
       - the MM queue
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (154 commits)
        ksm: allocate roots when needed
        mm: cleanup "swapcache" in do_swap_page
        mm,ksm: swapoff might need to copy
        mm,ksm: FOLL_MIGRATION do migration_entry_wait
        ksm: shrink 32-bit rmap_item back to 32 bytes
        ksm: treat unstable nid like in stable tree
        ksm: add some comments
        tmpfs: fix mempolicy object leaks
        tmpfs: fix use-after-free of mempolicy object
        mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages
        mm: export mmu notifier invalidates
        mm: accelerate mm_populate() treatment of THP pages
        mm: use long type for page counts in mm_populate() and get_user_pages()
        mm: accurately document nr_free_*_pages functions with code comments
        HWPOISON: change order of error_states[]'s elements
        HWPOISON: fix misjudgement of page_action() for errors on mlocked pages
        memcg: stop warning on memcg_propagate_kmem
        net: change type of virtio_chan->p9_max_pages
        vmscan: change type of vm_total_pages to unsigned long
        fs/nfsd: change type of max_delegations, nfsd_drc_max_mem and nfsd_drc_mem_used
        ...
      5ce1a70e
    • Hugh Dickins's avatar
      ksm: allocate roots when needed · ef53d16c
      Hugh Dickins authored
      It is a pity to have MAX_NUMNODES+MAX_NUMNODES tree roots statically
      allocated, particularly when very few users will ever actually tune
      merge_across_nodes 0 to use more than 1+1 of those trees.  Not a big
      deal (only 16kB wasted on each machine with CONFIG_MAXSMP), but a pity.
      
      Start off with 1+1 statically allocated, then if merge_across_nodes is
      ever tuned, allocate for nr_node_ids+nr_node_ids.  Do not attempt to
      free up the extra if it's tuned back, that would be a waste of effort.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ef53d16c
    • Hugh Dickins's avatar
      mm: cleanup "swapcache" in do_swap_page · 56f31801
      Hugh Dickins authored
      I dislike the way in which "swapcache" gets used in do_swap_page():
      there is always a page from swapcache there (even if maybe uncached by
      the time we lock it), but tests are made according to "swapcache".
      Rework that with "page != swapcache", as has been done in unuse_pte().
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      56f31801
    • Hugh Dickins's avatar
      mm,ksm: swapoff might need to copy · 9e16b7fb
      Hugh Dickins authored
      Before establishing that KSM page migration was the cause of my
      WARN_ON_ONCE(page_mapped(page))s, I suspected that they came from the
      lack of a ksm_might_need_to_copy() in swapoff's unuse_pte() - which in
      many respects is equivalent to faulting in a page.
      
      In fact I've never caught that as the cause: but in theory it does at
      least need the KSM_RUN_UNMERGE check in ksm_might_need_to_copy(), to
      avoid bringing a KSM page back in when it's not supposed to be.
      
      I intended to copy how it's done in do_swap_page(), but have a strong
      aversion to how "swapcache" ends up being used there: rework it with
      "page != swapcache".
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9e16b7fb
    • Hugh Dickins's avatar
      mm,ksm: FOLL_MIGRATION do migration_entry_wait · 5117b3b8
      Hugh Dickins authored
      In "ksm: remove old stable nodes more thoroughly" I said that I'd never
      seen its WARN_ON_ONCE(page_mapped(page)).  True at the time of writing,
      but it soon appeared once I tried fuller tests on the whole series.
      
      It turned out to be due to the KSM page migration itself: unmerge_and_
      remove_all_rmap_items() failed to locate and replace all the KSM pages,
      because of that hiatus in page migration when old pte has been replaced
      by migration entry, but not yet by new pte.  follow_page() finds no page
      at that instant, but a KSM page reappears shortly after, without a
      fault.
      
      Add FOLL_MIGRATION flag, so follow_page() can do migration_entry_wait()
      for KSM's break_cow().  I'd have preferred to avoid another flag, and do
      it every time, in case someone else makes the same easy mistake; but did
      not find another transgressor (the common get_user_pages() is of course
      safe), and cannot be sure that every follow_page() caller is prepared to
      sleep - ia64's xencomm_vtop()? Now, THP's wait_split_huge_page() can
      already sleep there, since anon_vma locking was changed to mutex, but
      maybe that's somehow excluded.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5117b3b8
    • Hugh Dickins's avatar
      ksm: shrink 32-bit rmap_item back to 32 bytes · bc56620b
      Hugh Dickins authored
      Think of struct rmap_item as an extension of struct page (restricted to
      MADV_MERGEABLE areas): there may be a lot of them, we need to keep them
      small, especially on 32-bit architectures of limited lowmem.
      
      Siting "int nid" after "unsigned int checksum" works nicely on 64-bit,
      making no change to its 64-byte struct rmap_item; but bloats the 32-bit
      struct rmap_item from (nicely cache-aligned) 32 bytes to 36 bytes, which
      rounds up to 40 bytes once allocated from slab.  We'd better avoid that.
      
      Hey, I only just remembered that the anon_vma pointer in struct
      rmap_item has no purpose until the rmap_item is hung from a stable tree
      node (which has its own nid field); and rmap_item's nid field no purpose
      than to say which tree root to tell rb_erase() when unlinking from an
      unstable tree.
      
      Double them up in a union.  There's just one place where we set anon_vma
      early (when we already hold mmap_sem): now we must remove tree_rmap_item
      from its unstable tree there, before overwriting nid.  No need to
      spatter BUG()s around: we'd be seeing oopses if this were wrong.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bc56620b
    • Hugh Dickins's avatar
      ksm: treat unstable nid like in stable tree · b599cbdf
      Hugh Dickins authored
      An inconsistency emerged in reviewing the NUMA node changes to KSM: when
      meeting a page from the wrong NUMA node in a stable tree, we say that
      it's okay for comparisons, but not as a leaf for merging; whereas when
      meeting a page from the wrong NUMA node in an unstable tree, we bail out
      immediately.
      
      Now, it might be that a wrong NUMA node in an unstable tree is more
      likely to correlate with instablility (different content, with rbnode
      now misplaced) than page migration; but even so, we are accustomed to
      instablility in the unstable tree.
      
      Without strong evidence for which strategy is generally better, I'd
      rather be consistent with what's done in the stable tree: accept a page
      from the wrong NUMA node for comparison, but not as a leaf for merging.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b599cbdf
    • Hugh Dickins's avatar
      ksm: add some comments · 8fdb3dbf
      Hugh Dickins authored
      Added slightly more detail to the Documentation of merge_across_nodes, a
      few comments in areas indicated by review, and renamed get_ksm_page()'s
      argument from "locked" to "lock_it".  No functional change.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Petr Holasek <pholasek@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Izik Eidus <izik.eidus@ravellosystems.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8fdb3dbf
    • Greg Thelen's avatar
      tmpfs: fix mempolicy object leaks · 49cd0a5c
      Greg Thelen authored
      Fix several mempolicy leaks in the tmpfs mount logic.  These leaks are
      slow - on the order of one object leaked per mount attempt.
      
      Leak 1 (umount doesn't free mpol allocated in mount):
          while true; do
              mount -t tmpfs -o mpol=interleave,size=100M nodev /mnt
              umount /mnt
          done
      
      Leak 2 (errors parsing remount options will leak mpol):
          mount -t tmpfs -o size=100M nodev /mnt
          while true; do
              mount -o remount,mpol=interleave,size=x /mnt 2> /dev/null
          done
          umount /mnt
      
      Leak 3 (multiple mpol per mount leak mpol):
          while true; do
              mount -t tmpfs -o mpol=interleave,mpol=interleave,size=100M nodev /mnt
              umount /mnt
          done
      
      This patch fixes all of the above.  I could have broken the patch into
      three pieces but is seemed easier to review as one.
      
      [akpm@linux-foundation.org: fix handling of mpol_parse_str() errors, per Hugh]
      Signed-off-by: default avatarGreg Thelen <gthelen@google.com>
      Acked-by: default avatarHugh Dickins <hughd@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      49cd0a5c
    • Greg Thelen's avatar
      tmpfs: fix use-after-free of mempolicy object · 5f00110f
      Greg Thelen authored
      The tmpfs remount logic preserves filesystem mempolicy if the mpol=M
      option is not specified in the remount request.  A new policy can be
      specified if mpol=M is given.
      
      Before this patch remounting an mpol bound tmpfs without specifying
      mpol= mount option in the remount request would set the filesystem's
      mempolicy object to a freed mempolicy object.
      
      To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run:
          # mkdir /tmp/x
      
          # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x
      
          # grep /tmp/x /proc/mounts
          nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0
      
          # mount -o remount,size=200M nodev /tmp/x
      
          # grep /tmp/x /proc/mounts
          nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0
              # note ? garbage in mpol=... output above
      
          # dd if=/dev/zero of=/tmp/x/f count=1
              # panic here
      
      Panic:
          BUG: unable to handle kernel NULL pointer dereference at           (null)
          IP: [<          (null)>]           (null)
          [...]
          Oops: 0010 [#1] SMP DEBUG_PAGEALLOC
          Call Trace:
            mpol_shared_policy_init+0xa5/0x160
            shmem_get_inode+0x209/0x270
            shmem_mknod+0x3e/0xf0
            shmem_create+0x18/0x20
            vfs_create+0xb5/0x130
            do_last+0x9a1/0xea0
            path_openat+0xb3/0x4d0
            do_filp_open+0x42/0xa0
            do_sys_open+0xfe/0x1e0
            compat_sys_open+0x1b/0x20
            cstar_dispatch+0x7/0x1f
      
      Non-debug kernels will not crash immediately because referencing the
      dangling mpol will not cause a fault.  Instead the filesystem will
      reference a freed mempolicy object, which will cause unpredictable
      behavior.
      
      The problem boils down to a dropped mpol reference below if
      shmem_parse_options() does not allocate a new mpol:
      
          config = *sbinfo
          shmem_parse_options(data, &config, true)
          mpol_put(sbinfo->mpol)
          sbinfo->mpol = config.mpol  /* BUG: saves unreferenced mpol */
      
      This patch avoids the crash by not releasing the mempolicy if
      shmem_parse_options() doesn't create a new mpol.
      
      How far back does this issue go? I see it in both 2.6.36 and 3.3.  I did
      not look back further.
      Signed-off-by: default avatarGreg Thelen <gthelen@google.com>
      Acked-by: default avatarHugh Dickins <hughd@google.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5f00110f
    • Mel Gorman's avatar
      mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages · 67d46b29
      Mel Gorman authored
      Rob van der Heij reported the following (paraphrased) on private mail.
      
      	The scenario is that I want to avoid backups to fill up the page
      	cache and purge stuff that is more likely to be used again (this is
      	with s390x Linux on z/VM, so I don't give it as much memory that
      	we don't care anymore). So I have something with LD_PRELOAD that
      	intercepts the close() call (from tar, in this case) and issues
      	a posix_fadvise() just before closing the file.
      
      	This mostly works, except for small files (less than 14 pages)
      	that remains in page cache after the face.
      
      Unfortunately Rob has not had a chance to test this exact patch but the
      test program below should be reproducing the problem he described.
      
      The issue is the per-cpu pagevecs for LRU additions.  If the pages are
      added by one CPU but fadvise() is called on another then the pages
      remain resident as the invalidate_mapping_pages() only drains the local
      pagevecs via its call to pagevec_release().  The user-visible effect is
      that a program that uses fadvise() properly is not obeyed.
      
      A possible fix for this is to put the necessary smarts into
      invalidate_mapping_pages() to globally drain the LRU pagevecs if a
      pagevec page could not be discarded.  The downside with this is that an
      inode cache shrink would send a global IPI and memory pressure
      potentially causing global IPI storms is very undesirable.
      
      Instead, this patch adds a check during fadvise(POSIX_FADV_DONTNEED) to
      check if invalidate_mapping_pages() discarded all the requested pages.
      If a subset of pages are discarded it drains the LRU pagevecs and tries
      again.  If the second attempt fails, it assumes it is due to the pages
      being mapped, locked or dirty and does not care.  With this patch, an
      application using fadvise() correctly will be obeyed but there is a
      downside that a malicious application can force the kernel to send
      global IPIs and increase overhead.
      
      If accepted, I would like this to be considered as a -stable candidate.
      It's not an urgent issue but it's a system call that is not working as
      advertised which is weak.
      
      The following test program demonstrates the problem.  It should never
      report that pages are still resident but will without this patch.  It
      assumes that CPU 0 and 1 exist.
      
      int main() {
      	int fd;
      	int pagesize = getpagesize();
      	ssize_t written = 0, expected;
      	char *buf;
      	unsigned char *vec;
      	int resident, i;
      	cpu_set_t set;
      
      	/* Prepare a buffer for writing */
      	expected = FILESIZE_PAGES * pagesize;
      	buf = malloc(expected + 1);
      	if (buf == NULL) {
      		printf("ENOMEM\n");
      		exit(EXIT_FAILURE);
      	}
      	buf[expected] = 0;
      	memset(buf, 'a', expected);
      
      	/* Prepare the mincore vec */
      	vec = malloc(FILESIZE_PAGES);
      	if (vec == NULL) {
      		printf("ENOMEM\n");
      		exit(EXIT_FAILURE);
      	}
      
      	/* Bind ourselves to CPU 0 */
      	CPU_ZERO(&set);
      	CPU_SET(0, &set);
      	if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) {
      		perror("sched_setaffinity");
      		exit(EXIT_FAILURE);
      	}
      
      	/* open file, unlink and write buffer */
      	fd = open("fadvise-test-file", O_CREAT|O_EXCL|O_RDWR);
      	if (fd == -1) {
      		perror("open");
      		exit(EXIT_FAILURE);
      	}
      	unlink("fadvise-test-file");
      	while (written < expected) {
      		ssize_t this_write;
      		this_write = write(fd, buf + written, expected - written);
      
      		if (this_write == -1) {
      			perror("write");
      			exit(EXIT_FAILURE);
      		}
      
      		written += this_write;
      	}
      	free(buf);
      
      	/*
      	 * Force ourselves to another CPU. If fadvise only flushes the local
      	 * CPUs pagevecs then the fadvise will fail to discard all file pages
      	 */
      	CPU_ZERO(&set);
      	CPU_SET(1, &set);
      	if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) {
      		perror("sched_setaffinity");
      		exit(EXIT_FAILURE);
      	}
      
      	/* sync and fadvise to discard the page cache */
      	fsync(fd);
      	if (posix_fadvise(fd, 0, expected, POSIX_FADV_DONTNEED) == -1) {
      		perror("posix_fadvise");
      		exit(EXIT_FAILURE);
      	}
      
      	/* map the file and use mincore to see which parts of it are resident */
      	buf = mmap(NULL, expected, PROT_READ, MAP_SHARED, fd, 0);
      	if (buf == NULL) {
      		perror("mmap");
      		exit(EXIT_FAILURE);
      	}
      	if (mincore(buf, expected, vec) == -1) {
      		perror("mincore");
      		exit(EXIT_FAILURE);
      	}
      
      	/* Check residency */
      	for (i = 0, resident = 0; i < FILESIZE_PAGES; i++) {
      		if (vec[i])
      			resident++;
      	}
      	if (resident != 0) {
      		printf("Nr unexpected pages resident: %d\n", resident);
      		exit(EXIT_FAILURE);
      	}
      
      	munmap(buf, expected);
      	close(fd);
      	free(vec);
      	exit(EXIT_SUCCESS);
      }
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Reported-by: default avatarRob van der Heij <rvdheij@gmail.com>
      Tested-by: default avatarRob van der Heij <rvdheij@gmail.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      67d46b29
    • Cliff Wickman's avatar
      mm: export mmu notifier invalidates · fa794199
      Cliff Wickman authored
      We at SGI have a need to address some very high physical address ranges
      with our GRU (global reference unit), sometimes across partitioned
      machine boundaries and sometimes with larger addresses than the cpu
      supports.  We do this with the aid of our own 'extended vma' module
      which mimics the vma.  When something (either unmap or exit) frees an
      'extended vma' we use the mmu notifiers to clean them up.
      
      We had been able to mimic the functions
      __mmu_notifier_invalidate_range_start() and
      __mmu_notifier_invalidate_range_end() by locking the per-mm lock and
      walking the per-mm notifier list.  But with the change to a global srcu
      lock (static in mmu_notifier.c) we can no longer do that.  Our module has
      no access to that lock.
      
      So we request that these two functions be exported.
      Signed-off-by: default avatarCliff Wickman <cpw@sgi.com>
      Acked-by: default avatarRobin Holt <holt@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fa794199
    • Michel Lespinasse's avatar
      mm: accelerate mm_populate() treatment of THP pages · 240aadee
      Michel Lespinasse authored
      This change adds a follow_page_mask function which is equivalent to
      follow_page, but with an extra page_mask argument.
      
      follow_page_mask sets *page_mask to HPAGE_PMD_NR - 1 when it encounters
      a THP page, and to 0 in other cases.
      
      __get_user_pages() makes use of this in order to accelerate populating
      THP ranges - that is, when both the pages and vmas arrays are NULL, we
      don't need to iterate HPAGE_PMD_NR times to cover a single THP page (and
      we also avoid taking mm->page_table_lock that many times).
      Signed-off-by: default avatarMichel Lespinasse <walken@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      240aadee
    • Michel Lespinasse's avatar
      mm: use long type for page counts in mm_populate() and get_user_pages() · 28a35716
      Michel Lespinasse authored
      Use long type for page counts in mm_populate() so as to avoid integer
      overflow when running the following test code:
      
      int main(void) {
        void *p = mmap(NULL, 0x100000000000, PROT_READ,
                       MAP_PRIVATE | MAP_ANON, -1, 0);
        printf("p: %p\n", p);
        mlockall(MCL_CURRENT);
        printf("done\n");
        return 0;
      }
      Signed-off-by: default avatarMichel Lespinasse <walken@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      28a35716
    • Zhang Yanfei's avatar
      mm: accurately document nr_free_*_pages functions with code comments · e0fb5815
      Zhang Yanfei authored
      nr_free_zone_pages(), nr_free_buffer_pages() and nr_free_pagecache_pages()
      are horribly badly named, so accurately document them with code comments
      in case of the misuse of them.
      
      [akpm@linux-foundation.org: tweak comments]
      Reviewed-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e0fb5815
    • Naoya Horiguchi's avatar
      HWPOISON: change order of error_states[]'s elements · 5f4b9fc5
      Naoya Horiguchi authored
      error_states[] has two separate states "unevictable LRU page" and
      "mlocked LRU page", and the former one has the higher priority now.  But
      because of that the latter one is rarely chosen because pages with
      PageMlocked highly likely have PG_unevictable set.  On the other hand,
      PG_unevictable without PageMlocked is common for ramfs or SHM_LOCKed
      shared memory, so reversing the priority of these two states helps us
      clearly distinguish them.
      Signed-off-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Chen Gong <gong.chen@linux.intel.com>
      Cc: Tony Luck <tony.luck@intel.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5f4b9fc5
    • Naoya Horiguchi's avatar
      HWPOISON: fix misjudgement of page_action() for errors on mlocked pages · 524fca1e
      Naoya Horiguchi authored
      memory_failure() can't handle memory errors on mlocked pages correctly,
      because page_action() judges such errors as ones on "unknown pages"
      instead of ones on "unevictable LRU page" or "mlocked LRU page".  In
      order to determine page_state page_action() checks page flags at the
      timing of the judgement, but such page flags are not the same with those
      just after memory_failure() is called, because memory_failure() does
      unmapping of the error pages before doing page_action().  This unmapping
      changes the page state, especially page_remove_rmap() (called from
      try_to_unmap_one()) clears PG_mlocked, so page_action() can't catch
      mlocked pages after that.
      
      With this patch, we store the page flag of the error page before doing
      unmap, and (only) if the first check with page flags at the time decided
      the error page is unknown, we do the second check with the stored page
      flag.  This implementation doesn't change error handling for the page
      types for which the first check can determine the page state correctly.
      
      [akpm@linux-foundation.org: tweak comments]
      Signed-off-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Tony Luck <tony.luck@intel.com>
      Cc: Chen Gong <gong.chen@linux.intel.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      524fca1e
    • Hugh Dickins's avatar
      memcg: stop warning on memcg_propagate_kmem · 6d043990
      Hugh Dickins authored
      Whilst I run the risk of a flogging for disloyalty to the Lord of Sealand,
      I do have CONFIG_MEMCG=y CONFIG_MEMCG_KMEM not set, and grow tired of the
      "mm/memcontrol.c:4972:12: warning: `memcg_propagate_kmem' defined but not
      used [-Wunused-function]" seen in 3.8-rc: move the #ifdef outwards.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Glauber Costa <glommer@parallels.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6d043990
    • Zhang Yanfei's avatar
      net: change type of virtio_chan->p9_max_pages · 7293bfba
      Zhang Yanfei authored
      This member of struct virtio_chan is calculated from nr_free_buffer_pages
      so change its type to unsigned long in case of overflow.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: David Miller <davem@davemloft.net>
      Cc: Eric Van Hensbergen <ericvh@gmail.com>
      Cc: Ron Minnich <rminnich@sandia.gov>
      Cc: Latchesar Ionkov <lucho@ionkov.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7293bfba
    • Zhang Yanfei's avatar
      vmscan: change type of vm_total_pages to unsigned long · b21e0b90
      Zhang Yanfei authored
      This variable is calculated from nr_free_pagecache_pages so
      change its type to unsigned long.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b21e0b90
    • Zhang Yanfei's avatar
      fs/nfsd: change type of max_delegations, nfsd_drc_max_mem and nfsd_drc_mem_used · 697ce9be
      Zhang Yanfei authored
      The three variables are calculated from nr_free_buffer_pages so change
      their types to unsigned long in case of overflow.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      697ce9be
    • Zhang Yanfei's avatar
      fs/buffer.c: change type of max_buffer_heads to unsigned long · 43be594a
      Zhang Yanfei authored
      max_buffer_heads is calculated from nr_free_buffer_pages(), so change
      its type to unsigned long in case of overflow.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      43be594a
    • Zhang Yanfei's avatar
      ia64: use %ld to print pages calculated in nr_free_buffer_pages · 6434b94a
      Zhang Yanfei authored
      Now the function nr_free_buffer_pages returns unsigned long, so use %ld
      to print its return value.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6434b94a
    • Zhang Yanfei's avatar
      mm: fix return type for functions nr_free_*_pages · ebec3862
      Zhang Yanfei authored
      Currently, the amount of RAM that functions nr_free_*_pages return is
      held in unsigned int.  But in machines with big memory (exceeding 16TB),
      the amount may be incorrect because of overflow, so fix it.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Simon Horman <horms@verge.net.au>
      Cc: Julian Anastasov <ja@ssi.bg>
      Cc: David Miller <davem@davemloft.net>
      Cc: Eric Van Hensbergen <ericvh@gmail.com>
      Cc: Ron Minnich <rminnich@sandia.gov>
      Cc: Latchesar Ionkov <lucho@ionkov.net>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Minchan Kim <minchan.kim@gmail.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ebec3862
    • Michal Hocko's avatar
      memcg: cleanup mem_cgroup_init comment · 1081312f
      Michal Hocko authored
      We should encourage all memcg controller initialization independent on a
      specific mem_cgroup to be done here rather than exploit css_alloc
      callback and assume that nothing happens before root cgroup is created.
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.cz>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Tejun Heo <htejun@gmail.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1081312f
    • Michal Hocko's avatar
      memcg: move memcg_stock initialization to mem_cgroup_init · e4777496
      Michal Hocko authored
      memcg_stock are currently initialized during the root cgroup allocation
      which is OK but it pointlessly pollutes memcg allocation code with
      something that can be called when the memcg subsystem is initialized by
      mem_cgroup_init along with other controller specific parts.
      
      This patch wraps the current memcg_stock initialization code into a
      helper calls it from the controller subsystem initialization code.
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.cz>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Tejun Heo <htejun@gmail.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e4777496