- 20 Nov, 2010 21 commits
-
-
Vinod Koul authored
To avoid mismatch in driver and firmware error codes assign specfic values to each enum. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vinod Koul authored
The PCM interface in SST driver is cmds only, this patch changes the interface to open, close and cmd interface. This allows SST driver to keep easy track of handles open Signed-off-by:
-
Mark Allyn authored
This driver is for the Security Processor, a dedicated encryption and decryption driver that is used on the Intel mobile platform. This has been checked with checkpatch and there are four warnings for lines over 80 charactors. There is one compile warning. This is for a function that is only used if the rar register driver is needed. There is an ifdef in a header file that stubs out the rar register driver if the rar register is not configured. This driver does add a configuration, which is CONFIG_DX_SEP. Signed-off-by:
Mark Allyn <mark.a.allyn@intel.com> Signed-off-by:
-
Randy Dunlap authored
clearpad_tm1217 driver uses many input_() interfaces, so it should depend on INPUT. clearpad_tm1217.c:(.text+0xf19ac): undefined reference to `input_unregister_device' clearpad_tm1217.c:(.text+0xf1b19): undefined reference to `input_event' clearpad_tm1217.c:(.text+0xf1b31): undefined reference to `input_event' clearpad_tm1217.c:(.text+0xf1bb4): undefined reference to `input_event' clearpad_tm1217.c:(.text+0xf1bf2): undefined reference to `input_event' drivers/built-in.o:clearpad_tm1217.c:(.text+0xf1c08): more undefined references to `input_event' follow clearpad_tm1217.c:(.text+0xf1df3): undefined reference to `input_allocate_device' clearpad_tm1217.c:(.text+0xf1eac): undefined reference to `input_set_abs_params' clearpad_tm1217.c:(.text+0xf1ed1): undefined reference to `input_set_abs_params' clearpad_tm1217.c:(.text+0xf1ed8): undefined reference to `input_register_device' clearpad_tm1217.c:(.text+0xf2040): undefined reference to `input_unregister_device' clearpad_tm1217.c:(.text+0xf204b): undefined reference to `input_free_device' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Ramesh Agarwal <ramesh.agarwal@intel.com> Signed-off-by:
-
Marek Belisko authored
This patch fix following warning: drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:67:22: warning: ‘pft1000info’ may be used uninitialized in this function Signed-off-by:
Marek Belisko <marek.belisko@gmail.com> Signed-off-by:
-
Michael Hennerich authored
Stick to the 80 character line limit at least for code Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Remove depreciated macro from header Signed-off-by:
-
Michael Hennerich authored
Align DAC sysfs attributes naming with the convention used by ADC Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
-
Brett Rudley authored
Part of BMAC removal. Signed-off-by:
-
Arend van Spriel authored
- removed PKTSETLEN macro and used __skb_trim call instead. - removed unused macros PKTSETPOOL and PKTPOOL Reviewed-by:
Henry Ptasinski <henryp@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Replacing PKTPUSH by skb_push() call and PKTPULL by skb_pull() call to make it obvious what the operation is doing with the packet. Reviewed-by:
-
Mike Rapoport authored
Signed-off-by:
Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by:
-
Mike Rapoport authored
Signed-off-by:
-
- 17 Nov, 2010 8 commits
-
-
Vinod Koul authored
This removes the remaining bit of aava dependent and related bits from driver Signed-off-by:
-
Yong Wang authored
The spectra nand driver takes quite some time to initialize because it needs to scan the whole nand disk to find the latest block table. This patch initializes the spectra nand driver asynchronously so that other things in the kernel can initialize in parallel to the scanning operation. Signed-off-by:
Yong Wang <yong.y.wang@intel.com> Signed-off-by:
-
Yong Wang authored
Currently there are some driver initialization logic that is not part of nand_pci_probe function. This will result in that part of driver initialization code executing even on platforms without the corresponding hardware which is always dangerous. Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by:
-
Dan Carpenter authored
GCC complains that if (info->CardReady) is false we kfree() an uninitialized pointer. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Brett Rudley authored
Get rid of the private PCI access routines and replace with standard calls from linux/pci.h in nicpci.c (The private versions are still used in siutils.c... for now) Signed-off-by:
-
Brett Rudley authored
Do the substitution (and then fix all the dang lines that were pushed past 80 columns.) Some of the touched lines triggered checkpatch warnings for completely unrelated reasons that were already there. Those will have to be addressed later. Signed-off-by:
-
Brett Rudley authored
Signed-off-by:
-
Brett Rudley authored
Signed-off-by:
-
- 16 Nov, 2010 11 commits
-
-
Dan Carpenter authored
status is used to store negative error codes throughout. The only place where this is a runtime bug is if create_worker_threads() fails. Signed-off-by:
-
Dan Carpenter authored
wrm() returns negative error codes so "ret" needs to be signed here. There was place where wrm() returned positive EACCES instead of negative -EACCES so I fixed that as well. Also a few checkpatch.pl issues. Signed-off-by:
-
Randy Dunlap authored
Typo causes build errors. Did anyone even build this driver? Signed-off-by:
-
Dan Carpenter authored
This is a static checker patch and I don't have this hardware. This code is unusual because while I've often seen a double lock, this is the first time I've seen code that takes a lock 11 times in a row. I feel like I must have missed something. But I've looked very carefully I don't see any way the original code is correct. Does spi_sync() somehow release the lock in a way that I can't see? Even if it does, the locking would still be wrong. Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
-
Dan Carpenter authored
We dereference "ts" in the printk so move the kfree() down a line. Signed-off-by:
-
Randy Dunlap authored
The easycap driver has module parameters (bars, gain, & debug) with global scope that intrude on the kernel namespace and cause build problems. Change the names of them to be driver-specific and make 2 of them static. drivers/built-in.o:(.bss+0x97c00): multiple definition of `debug' ld: Warning: size of symbol `debug' changed from 58 in arch/x86/built-in.o to 4 in drivers/built-in.o Signed-off-by:
-
Randy Dunlap authored
The synaptics_i2c_rmi4 driver uses input_*() interfaces, so it should depend on INPUT to fix its build errors: ERROR: "input_event" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined! ERROR: "input_free_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined! ERROR: "input_register_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined! ERROR: "input_set_abs_params" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined! ERROR: "input_allocate_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined! ERROR: "input_unregister_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined! Signed-off-by:
-
Tushar Mehta authored
This is a patch to the dirhash.c file that fixes up a number of issues found by the checkpatch.pl tool Signed-off-by:
Tushar Mehta <tushariiitb@gmail.com> Signed-off-by:
-
Brandon Philips authored
I was going to remove netvsc_set_multicast_list() so I think it is worth adding a comment since it isn't immediately clear why you would want this. Signed-off-by:
Brandon Philips <brandon@ifup.org> Acked-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
