- 21 Apr, 2021 9 commits
-
-
Yinjun Zhang authored
The number of lanes of devlink port should be correctly initialized when registering the port, so that the input check when running "devlink port split <port> count <N>" can pass. Fixes: a21cf0a8 ("devlink: Add a new devlink port lanes attribute and pass to netlink") Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-2021-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 As there was -rc8 release, one more important fix for v5.12. iwlwifi * fix spinlock warning in gen2 devices ==================== Signed-off-by:
-
Colin Ian King authored
The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels) are incorrect and always lead to a zero result. The mask values are currently the incorrect post-right shifted values, fix this by setting them to the currect values. (I double checked these against the TMS320TCI6482 data sheet, section 5.30, page 127 to ensure I had the correct mask values for the TXERRCH and RXERRCH fields in the MACSTATUS register). Addresses-Coverity: ("Operands don't affect result") Fixes: a6286ee6 ("net: Add TI DaVinci EMAC driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Vadym Kochan authored
For some reason there might be a crash during ports creation if port events are handling at the same time because fw may send initial port event with down state. The crash points to cancel_delayed_work() which is called when port went is down. Currently I did not find out the real cause of the issue, so fixed it by cancel port stats work only if previous port's state was up & runnig. The following is the crash which can be triggered: [ 28.311104] Unable to handle kernel paging request at virtual address 000071775f776600 [ 28.319097] Mem abort info: [ 28.321914] ESR = 0x96000004 [ 28.324996] EC = 0x25: DABT (current EL), IL = 32 bits [ 28.330350] SET = 0, FnV = 0 [ 28.333430] EA = 0, S1PTW = 0 [ 28.336597] Data abort info: [ 28.339499] ISV = 0, ISS = 0x00000004 [ 28.343362] CM = 0, WnR = 0 [ 28.346354] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100bf7000 [ 28.352842] [000071775f776600] pgd=0000000000000000, p4d=0000000000000000 [ 28.359695] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 28.365310] Modules linked in: prestera_pci(+) prestera uio_pdrv_genirq [ 28.372005] CPU: 0 PID: 1291 Comm: kworker/0:1H Not tainted 5.11.0-rc4 #1 [ 28.378846] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 28.384283] Workqueue: prestera_fw_wq prestera_fw_evt_work_fn [prestera_pci] [ 28.391413] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 28.397468] pc : get_work_pool+0x48/0x60 [ 28.401442] lr : try_to_grab_pending+0x6c/0x1b0 [ 28.406018] sp : ffff80001391bc60 [ 28.409358] x29: ffff80001391bc60 x28: 0000000000000000 [ 28.414725] x27: ffff000104fc8b40 x26: ffff80001127de88 [ 28.420089] x25: 0000000000000000 x24: ffff000106119760 [ 28.425452] x23: ffff00010775dd60 x22: ffff00010567e000 [ 28.430814] x21: 0000000000000000 x20: ffff80001391bcb0 [ 28.436175] x19: ffff00010775deb8 x18: 00000000000000c0 [ 28.441537] x17: 0000000000000000 x16: 000000008d9b0e88 [ 28.446898] x15: 0000000000000001 x14: 00000000000002ba [ 28.452261] x13: 80a3002c00000002 x12: 00000000000005f4 [ 28.457622] x11: 0000000000000030 x10: 000000000000000c [ 28.462985] x9 : 000000000000000c x8 : 0000000000000030 [ 28.468346] x7 : ffff800014400000 x6 : ffff000106119758 [ 28.473708] x5 : 0000000000000003 x4 : ffff00010775dc60 [ 28.479068] x3 : 0000000000000000 x2 : 0000000000000060 [ 28.484429] x1 : 000071775f776600 x0 : ffff00010775deb8 [ 28.489791] Call trace: [ 28.492259] get_work_pool+0x48/0x60 [ 28.495874] cancel_delayed_work+0x38/0xb0 [ 28.500011] prestera_port_handle_event+0x90/0xa0 [prestera] [ 28.505743] prestera_evt_recv+0x98/0xe0 [prestera] [ 28.510683] prestera_fw_evt_work_fn+0x180/0x228 [prestera_pci] [ 28.516660] process_one_work+0x1e8/0x360 [ 28.520710] worker_thread+0x44/0x480 [ 28.524412] kthread+0x154/0x160 [ 28.527670] ret_from_fork+0x10/0x38 [ 28.531290] Code: a8c17bfd d50323bf d65f03c0 9278dc21 (f9400020) [ 28.537429] ---[ end trace 5eced933df3a080b ]--- Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by:
Vadym Kochan <vkochan@marvell.com> Signed-off-by:
-
Stefano Garzarella authored
As reported by syzbot [1], there is a memory leak while closing the socket. We partially solved this issue with commit ac03046e ("vsock/virtio: free packets during the socket release"), but we forgot to drain the RX queue when the socket is definitely closed by the scheduled work. To avoid future issues, let's use the new virtio_transport_remove_sock() to drain the RX queue before removing the socket from the af_vsock lists calling vsock_remove_sock(). [1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9 Fixes: ac03046e ("vsock/virtio: free packets during the socket release") Reported-and-tested-by: syzbot+24452624fc4c571eedd9@syzkaller.appspotmail.com Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: fix TXQ lookups The TXQ handling changes in 12804793 ("sfc: decouple TXQ type from label") which were made as part of the support for encap offloads on EF10 caused some breakage on Siena (5000- and 6000-series) NICs, which caused null-dereference kernel panics. This series fixes those issues, and also a similarly incorrect code-path on EF10 which worked by chance. ==================== Signed-off-by:
-
Edward Cree authored
We're starting from a TXQ label, not a TXQ type, so efx_channel_get_tx_queue() is inappropriate. This worked by chance, because labels and types currently match on EF10, but we shouldn't rely on that. Fixes: 12804793 ("sfc: decouple TXQ type from label") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Edward Cree authored
We're starting from a TXQ label, not a TXQ type, so efx_channel_get_tx_queue() is inappropriate (and could return NULL, leading to panics). Fixes: 12804793 ("sfc: decouple TXQ type from label") Cc: stable@vger.kernel.org Signed-off-by:
-
Edward Cree authored
We're starting from a TXQ instance number ('qid'), not a TXQ type, so efx_get_tx_queue() is inappropriate (and could return NULL, leading to panics). Fixes: 12804793 ("sfc: decouple TXQ type from label") Reported-by:Trevor Hemsley <themsley@voiceflex.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 19 Apr, 2021 7 commits
-
-
Lijun Pan authored
I am making this change again since I received the following instruction. "As an IBM employee, you are not allowed to use your gmail account to work in any way on VNIC. You are not allowed to use your personal email account as a "hobby". You are an IBM employee 100% of the time. Please remove yourself completely from the maintainers file. I grant you a 1 time exception on contributions to VNIC to make this change." Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Signed-off-by:
-
Di Zhu authored
We encountered a crash: in the packet receiving process, we got an illegal VLAN device address, but the VLAN device address saved in vmcore is correct. After checking the code, we found a possible data competition: CPU 0: CPU 1: (RCU read lock) (RTNL lock) vlan_do_receive() register_vlan_dev() vlan_find_dev() ->__vlan_group_get_device() ->vlan_group_prealloc_vid() In vlan_group_prealloc_vid(), We need to make sure that memset() in kzalloc() is executed before assigning value to vlan devices array: ================================= kzalloc() ->memset(object, 0, size) smp_wmb() vg->vlan_devices_arrays[pidx][vidx] = array; ================================== Because __vlan_group_get_device() function depends on this order. otherwise we may get a wrong address from the hardware cache on another cpu. So fix it by adding memory barrier instruction to ensure the order of memory operations. Signed-off-by:Di Zhu <zhudi21@huawei.com> Signed-off-by:
-
Alexander Lobakin authored
Commit 38ec4944 ("gro: ensure frag0 meets IP header alignment") did the right thing, but missed the fact that napi_gro_frags() logics calls for skb_gro_reset_offset() *before* pulling Ethernet header to the skb linear space. That said, the introduced check for frag0 address being aligned to 4 always fails for it as Ethernet header is obviously 14 bytes long, and in case with NET_IP_ALIGN its start is not aligned to 4. Fix this by adding @nhoff argument to skb_gro_reset_offset() which tells if an IP header is placed right at the start of frag0 or not. This restores Fast GRO for napi_gro_frags() that became very slow after the mentioned commit, and preserves the introduced check to avoid silent unaligned accesses. From v1 [0]: - inline tiny skb_gro_reset_offset() to let the code be optimized more efficively (esp. for the !NET_IP_ALIGN case) (Eric); - pull in Reviewed-by from Eric. [0] https://lore.kernel.org/netdev/20210418114200.5839-1-alobakin@pm.me Fixes: 38ec4944 ("gro: ensure frag0 meets IP header alignment") Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Signed-off-by:
-
Linus Walleij authored
The former fix only papered over the actual problem: the ethernet core expects the netdev .dev member to have the proper DMA masks set, or there will be BUG_ON() triggered in kernel/dma/mapping.c. Fix this by simply copying dma_mask and dma_mask_coherent from the parent device. Fixes: e45d0fad ("net: ethernet: ixp4xx: Use parent dev for DMA pool") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Du Cheng authored
There is a reproducible sequence from the userland that will trigger a WARN_ON() condition in taprio_get_start_time, which causes kernel to panic if configured as "panic_on_warn". Catch this condition in parse_taprio_schedule to prevent this condition. Reported as bug on syzkaller: https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c Reported-by: syzbot+d50710fd0873a9c6b40c@syzkaller.appspotmail.com Signed-off-by:
Du Cheng <ducheng2@gmail.com> Acked-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Stefano Garzarella authored
VMCI feature is not supported in conjunction with the vSphere Fault Tolerance (FT) feature. VMware Tools can repeatedly try to create a vsock connection. If FT is enabled the kernel logs is flooded with the following messages: qp_alloc_hypercall result = -20 Could not attach to queue pair with -20 "qp_alloc_hypercall result = -20" was hidden by commit e8266c4c ("VMCI: Stop log spew when qp allocation isn't possible"), but "Could not attach to queue pair with -20" is still there flooding the log. Since the error message can be useful in some cases, print it only once. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Jiri Kosina authored
Analogically to what we did in 2800aadc ("iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same contexts. Reported-by: Heiner Kallweit <hkallweit1@gmail.com Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm
-
- 17 Apr, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.12-rc8, including fixes from netfilter, and bpf. BPF verifier changes stand out, otherwise things have slowed down. Current release - regressions: - gro: ensure frag0 meets IP header alignment - Revert "net: stmmac: re-init rx buffers when mac resume back" - ethernet: macb: fix the restore of cmp registers Previous releases - regressions: - ixgbe: Fix NULL pointer dereference in ethtool loopback test - ixgbe: fix unbalanced device enable/disable in suspend/resume - phy: marvell: fix detection of PHY on Topaz switches - make tcp_allowed_congestion_control readonly in non-init netns - xen-netback: Check for hotplug-status existence before watching Previous releases - always broken: - bpf: mitigate a speculative oob read of up to map value size by tightening the masking window - sctp: fix race condition in sctp_destroy_sock - sit, ip6_tunnel: Unregister catch-all devices - netfilter: nftables: clone set element expression template - netfilter: flowtable: fix NAT IPv6 offload mangling - net: geneve: check skb is large enough for IPv4/IPv6 header - netlink: don't call ->netlink_bind with table lock held" * tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) netlink: don't call ->netlink_bind with table lock held MAINTAINERS: update my email bpf: Update selftests to reflect new error states bpf: Tighten speculative pointer arithmetic mask bpf: Move sanitize_val_alu out of op switch bpf: Refactor and streamline bounds check into helper bpf: Improve verifier error messages for users bpf: Rework ptr_limit into alu_limit and add common error path bpf: Ensure off_reg has no mixed signed bounds for all types bpf: Move off_reg into sanitize_ptr_alu bpf: Use correct permission flag for mixed signed bounds arithmetic ch_ktls: do not send snd_una update to TCB in middle ch_ktls: tcb close causes tls connection failure ch_ktls: fix device connection close ch_ktls: Fix kernel panic i40e: fix the panic when running bpf in xdpdrv mode net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta net/mlx5e: Fix setting of RS FEC mode net/mlx5: Fix setting of devlink traps in switchdev mode Revert "net: stmmac: re-init rx buffers when mac resume back" ... -
Linus Torvalds authored
Merge tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "The largest change is for a regression that landed during -rc1 for block-device read-only handling. Vaibhav found a new use for the ability (originally introduced by virtio_pmem) to call back to the platform to flush data, but also found an original bug in that implementation. Lastly, Arnd cleans up some compile warnings in dax. This has all appeared in -next with no reported issues. Summary: - Fix a regression of read-only handling in the pmem driver - Fix a compile warning - Fix support for platform cache flush commands on powerpc/papr" * tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC libnvdimm: Notify disk drivers to revalidate region read-only dax: avoid -Wempty-body warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds authored
Pull CXL memory class fixes from Dan Williams: "A collection of fixes for the CXL memory class driver introduced in this release cycle. The driver was primarily developed on a work-in-progress QEMU emulation of the interface and we have since found a couple places where it hid spec compliance bugs in the driver, or had a spec implementation bug itself. The biggest change here is replacing a percpu_ref with an rwsem to cleanup a couple bugs in the error unwind path during ioctl device init. Lastly there were some minor cleanups to not export the power-management sysfs-ABI for the ioctl device, use the proper sysfs helper for emitting values, and prevent subtle bugs as new administration commands are added to the supported list. The bulk of it has appeared in -next save for the top commit which was found today and validated on a fixed-up QEMU model. Summary: - Fix support for CXL memory devices with registers offset from the BAR base. - Fix the reporting of device capacity. - Fix the driver commands list definition to be disconnected from the UAPI command list. - Replace percpu_ref with rwsem to fix initialization error path. - Fix leaks in the driver initialization error path. - Drop the power/ directory from CXL device sysfs. - Use the recommended sysfs helper for attribute 'show' implementations" * tag 'cxl-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/mem: Fix memory device capacity probing cxl/mem: Fix register block offset calculation cxl/mem: Force array size of mem_commands[] to CXL_MEM_COMMAND_ID_MAX cxl/mem: Disable cxl device power management cxl/mem: Do not rely on device_add() side effects for dev_set_name() failures cxl/mem: Fix synchronization mechanism for device removal vs ioctl operations cxl/mem: Use sysfs_emit() for attribute show routines -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: mm (documentation, kasan, and pagemap), csky, ia64, gcov, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib: remove "expecting prototype" kernel-doc warnings gcov: clang: fix clang-11+ build mm: ptdump: fix build failure mm/mapping_dirty_helpers: guard hugepage pud's usage ia64: tools: remove duplicate definition of ia64_mf() on ia64 ia64: tools: remove inclusion of ia64-specific version of errno.h header ia64: fix discontig.c section mismatches ia64: remove duplicate entries in generic_defconfig csky: change a Kconfig symbol name to fix e1000 build error kasan: remove redundant config option kasan: fix hwasan build for gcc mm: eliminate "expecting prototype" kernel-doc warnings
-
Dan Williams authored
The CXL Identify Memory Device output payload emits capacity in 256MB units. The driver is treating the capacity field as bytes. This was missed because QEMU reports bytes when it should report bytes / 256MB. Fixes: 8adaf747 ("cxl/mem: Find device capabilities") Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Florian Westphal authored
When I added support to allow generic netlink multicast groups to be restricted to subscribers with CAP_NET_ADMIN I was unaware that a genl_bind implementation already existed in the past. It was reverted due to ABBA deadlock: 1. ->netlink_bind gets called with the table lock held. 2. genetlink bind callback is invoked, it grabs the genl lock. But when a new genl subsystem is (un)registered, these two locks are taken in reverse order. One solution would be to revert again and add a comment in genl referring 1e82a62f, "genetlink: remove genl_bind"). This would need a second change in mptcp to not expose the raw token value anymore, e.g. by hashing the token with a secret key so userspace can still associate subflow events with the correct mptcp connection. However, Paolo Abeni reminded me to double-check why the netlink table is locked in the first place. I can't find one. netlink_bind() is already called without this lock when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt. Same holds for the netlink_unbind operation. Digging through the history, commit f7736080 ("netlink: access nlk groups safely in netlink bind and getname") expanded the lock scope. commit 3a20773b ("net: netlink: cap max groups which will be considered in netlink_bind()") ... removed the nlk->ngroups access that the lock scope extension was all about. Reduce the lock scope again and always call ->netlink_bind without the table lock. The Fixes tag should be vs. the patch mentioned in the link below, but that one got squash-merged into the patch that came earlier in the series. Fixes: 4d54cc32 ("mptcp: avoid lock_fast usage in accept path") Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Sean Tranchetti <stranche@codeaurora.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 16 Apr, 2021 18 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Fix for a potential hang at exit with SQPOLL from Pavel" * tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block: io_uring: fix early sqd_list removal sqpoll hangs
-
Randy Dunlap authored
Fix various kernel-doc warnings in lib/ due to missing or erroneous function names. Add kernel-doc for some function parameters that was missing. Use kernel-doc "Return:" notation in earlycpio.c. Quietens the following warnings: lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create' lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init' lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit' radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit' radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace' Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jiri Pirko <jiri@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Berg authored
With clang-11+, the code is broken due to my kvmalloc() conversion (which predated the clang-11 support code) leaving one vmalloc() in place. Fix that. Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
-
Christophe Leroy authored
READ_ONCE() cannot be used for reading PTEs. Use ptep_get() instead, to avoid the following errors: CC mm/ptdump.o In file included from <command-line>: mm/ptdump.c: In function 'ptdump_pte_entry': include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). 320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert' 301 | prefix ## suffix(); \ | ^~~~~~ include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert' 320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^~~~~~~~~~~~~~~~~~~ include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert' 36 | compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ | ^~~~~~~~~~~~~~~~~~ include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type' 49 | compiletime_assert_rwonce_type(x); \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE' 114 | pte_t val = READ_ONCE(*pte); | ^~~~~~~~~ make[2]: *** [mm/ptdump.o] Error 1 See commit 481e980a ("mm: Allow arches to provide ptep_get()") and commit c0e1c8c2 ("powerpc/8xx: Provide ptep_get() with 16k pages") for details. Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu Fixes: 30d621f6 ("mm: add generic ptdump") Signed-off-by:Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Steven Price <steven.price@arm.com> Signed-off-by:
-
Zack Rusin authored
Mapping dirty helpers have, so far, been only used on X86, but a port of vmwgfx to ARM64 exposed a problem which results in a compilation error on ARM64 systems: mm/mapping_dirty_helpers.c: In function `wp_clean_pud_entry': mm/mapping_dirty_helpers.c:172:32: error: implicit declaration of function `pud_dirty'; did you mean `pmd_dirty'? [-Werror=implicit-function-declaration] This is due to the fact that mapping_dirty_helpers code assumes that pud_dirty is always defined, which is not the case for architectures that don't define CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD. ARM64 arch is a little inconsistent when it comes to PUD hugepage helpers, e.g. it defines pud_young but not pud_dirty but regardless of that the core kernel code shouldn't assume that any of the PUD hugepage helpers are available unless CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD is defined. This prevents compilation errors whenever one of the drivers is ported to new architectures. Link: https://lkml.kernel.org/r/20210409165151.694574-1-zackr@vmware.comSigned-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Thomas Hellstrm (Intel) <thomas_os@shipmail.org> Signed-off-by:
-
John Paul Adrian Glaubitz authored
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build: CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o In file included from /usr/src/linux/tools/include/asm/barrier.h:24, from /usr/src/linux/tools/include/linux/ring_buffer.h:4, from libbpf.c:37: /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror] 43 | #define ia64_mf() asm volatile ("mf" ::: "memory") | In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20, from /usr/include/ia64-linux-gnu/asm/swab.h:11, from /usr/include/linux/swab.h:8, from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/ia64-linux-gnu/asm/byteorder.h:5, from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20, from libbpf.c:36: /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition 382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory") | cc1: all warnings being treated as errors Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h. Signed-off-by:John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
-
John Paul Adrian Glaubitz authored
There is no longer an ia64-specific version of the errno.h header below arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with: CC /usr/src/linux/tools/bpf/bpftool/btf_dumper.o In file included from /usr/src/linux/tools/include/linux/err.h:8, from btf_dumper.c:11: /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory 13 | #include "../../../arch/ia64/include/uapi/asm/errno.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. Thus, just remove the inclusion of the ia64-specific errno.h so that the build will use the generic errno.h header on this target which was used there anyway as the ia64-specific errno.h was just a wrapper for the generic header. Fixes: c25f867d ("ia64: remove unneeded uapi asm-generic wrappers") Signed-off-by: -
Randy Dunlap authored
Fix IA64 discontig.c Section mismatch warnings. When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions computer_pernodesize() and scatter_node_data() should not be marked as __meminit because they are needed after init, on any memory hotplug event. Also, early_nr_cpus_node() is called by compute_pernodesize(), so early_nr_cpus_node() cannot be __meminit either. WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize() The function arch_alloc_nodedata() references the function __meminit compute_pernodesize(). This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data() The function arch_refresh_nodedata() references the function __meminit scatter_node_data(). This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node() The function compute_pernodesize() references the function __meminit early_nr_cpus_node(). This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong. Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Fix ia64 generic_defconfig duplicate entries, as warned by: arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA: => 58 arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX: => 59 These 2 symbols still have the same value as in the removed lines. Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org Fixes: c331649e ("ia64: Use libata instead of the legacy ide driver in defconfigs") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Randy Dunlap authored
e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in arch/csky/Kconfig. The symbol in e1000 has been around longer, so change arch/csky/ to use DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000 is also a 2-line change) Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.orgSigned-off-by:
kernel test robot <lkp@intel.com> Acked-by:
Guo Ren <guoren@kernel.org> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Walter Wu authored
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack instrumentation, but we should only need one config, so that we remove CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1]. When enable KASAN stack instrumentation, then for gcc we could do no prompt and default value y, and for clang prompt and default value n. This patch fixes the following compilation warning: include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef] [akpm@linux-foundation.org: fix merge snafu] Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1] Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com Fixes: d9b571c8 ("kasan: fix KASAN_STACK dependency for HW_TAGS") Signed-off-by:
Walter Wu <walter-zh.wu@mediatek.com> Suggested-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes possible to enable CONFIG_KASAN_SW_TAGS. Unfortunately this fails to build at the moment, because the corresponding command line arguments use llvm specific syntax. Change it to use the cc-param macro instead, which works on both clang and gcc. [elver@google.com: fixup for "kasan: fix hwasan build for gcc"] Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.orgSigned-off-by:
Marco Elver <elver@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Randy Dunlap authored
Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function names. Quietens these kernel-doc warnings: mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-04-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 9 day(s) which contain a total of 8 files changed, 175 insertions(+), 111 deletions(-). The main changes are: 1) Fix a potential NULL pointer dereference in libbpf's xsk umem handling, from Ciara Loftus. 2) Mitigate a speculative oob read of up to map value size by tightening the masking window, from Daniel Borkmann. ==================== Signed-off-by: -
Lijun Pan authored
Update my email and change myself to Reviewer. Signed-off-by:
Lijun Pan <lijunp213@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Update various selftest error messages: * The 'Rx tried to sub from different maps, paths, or prohibited types' is reworked into more specific/differentiated error messages for better guidance. * The change into 'value -4294967168 makes map_value pointer be out of bounds' is due to moving the mixed bounds check into the speculation handling and thus occuring slightly later than above mentioned sanity check. * The change into 'math between map_value pointer and register with unbounded min value' is similarly due to register sanity check coming before the mixed bounds check. * The case of 'map access: known scalar += value_ptr from different maps' now loads fine given masks are the same from the different paths (despite max map value size being different). Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
This work tightens the offset mask we use for unprivileged pointer arithmetic in order to mitigate a corner case reported by Piotr and Benedict where in the speculative domain it is possible to advance, for example, the map value pointer by up to value_size-1 out-of-bounds in order to leak kernel memory via side-channel to user space. Before this change, the computed ptr_limit for retrieve_ptr_limit() helper represents largest valid distance when moving pointer to the right or left which is then fed as aux->alu_limit to generate masking instructions against the offset register. After the change, the derived aux->alu_limit represents the largest potential value of the offset register which we mask against which is just a narrower subset of the former limit. For minimal complexity, we call sanitize_ptr_alu() from 2 observation points in adjust_ptr_min_max_vals(), that is, before and after the simulated alu operation. In the first step, we retieve the alu_state and alu_limit before the operation as well as we branch-off a verifier path and push it to the verification stack as we did before which checks the dst_reg under truncation, in other words, when the speculative domain would attempt to move the pointer out-of-bounds. In the second step, we retrieve the new alu_limit and calculate the absolute distance between both. Moreover, we commit the alu_state and final alu_limit via update_alu_sanitation_state() to the env's instruction aux data, and bail out from there if there is a mismatch due to coming from different verification paths with different states. Reported-by:
Piotr Krysiuk <piotras@gmail.com> Reported-by:
Benedict Schlueter <benedict.schlueter@rub.de> Signed-off-by:
-
Daniel Borkmann authored
Add a small sanitize_needed() helper function and move sanitize_val_alu() out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu() as well out of its opcode switch so this helps to streamline both. Signed-off-by:
-
