- 24 Nov, 2014 1 commit
-
-
John W. Linville authored
Merge tag 'iwlwifi-for-john-2014-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Emmanuel Grumbach <egrumbach@gmail.com> says: "Not all the firmware know how to handle the HOT_SPOT_CMD. Make sure that the firmware will know this command before sending it. This avoids a firmware crash." Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
- 23 Nov, 2014 1 commit
-
-
Luciano Coelho authored
Older firmwares do not provide support for the HOT_SPOT_CMD command. Check for the appropriate TLV flag that declares hotspot support in the firmware to prevent a firmware assertion failure that can be triggered from the userspace, Cc: stable@vger.kernel.org [3.17+] Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 20 Nov, 2014 1 commit
-
-
Johannes Berg authored
This is a specific implementation, <asm/unaligned.h> is the multiplexer that has the arch-specific knowledge of which of the implementations needs to be used, so include that. This issue was revealed by kbuild testing when <asm/unaligned.h> was added in <linux/ieee80211.h> resulting in redefinition of get_unaligned_be16 (and probably others). Cc: stable@vger.kernel.org # v3.17 Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
- 19 Nov, 2014 1 commit
-
-
John W. Linville authored
Merge tag 'mac80211-for-john-2014-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Here's another last minute fix, for minstrel HT crashing depending on the value of some uninitialised stack." Signed-off-by:
-
- 18 Nov, 2014 1 commit
-
-
Felix Fietkau authored
The commit 5935839a "mac80211: improve minstrel_ht rate sorting by throughput & probability" introduced a crash on rate sorting that occurs when the rate added to the sorting array is faster than all the previous rates. Due to an off-by-one error, it reads the rate index from tp_list[-1], which contains uninitialized stack garbage, and then uses the resulting index for accessing the group rate stats, leading to a crash if the garbage value is big enough. Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
- 17 Nov, 2014 3 commits
-
-
Dmitry Torokhov authored
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Cc: stable@vger.kernel.org # v3.17 Acked-by:
-
Mathy Vanhoef authored
Kill the submitted URB in brcmf_usb_dl_cmd if the request timed out. This assures the URB is never submitted twice. It also prevents a possible use-after-free of the URB transfer buffer if a timeout occurs. Signed-off-by:
Mathy Vanhoef <vanhoefm@gmail.com> Acked-by:
-
Ben Greear authored
The commit that went into 3.17: ath9k: Summarize hw state per channel context Group and set hw state (opmode, primary_sta, beacon conf) per channel context instead of whole list of vifs. This would allow each channel context to run in different mode (STA/AP). Signed-off-by:Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
- 11 Nov, 2014 6 commits
-
-
Miaoqing Pan authored
Based on the reference clock, which could be 25MHz or 40MHz, AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550. But, when a chip reset is done, processing the initvals sets the register back to the default value. Fix this by moving the code in ath9k_hw_init_pll() to ar9003_hw_override_ini(). Also, do this override for AR9531. Cc: stable@vger.kernel.org Signed-off-by:
Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Arend van Spriel authored
The function chandef_to_chanspec() failed when converting a chandef with bandwidth set to NL80211_CHAN_WIDTH_20_NOHT. This was reported by user running the device in AP mode. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 304 at drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:381 chandef_to_chanspec.isra.11+0x158/0x184() Modules linked in: CPU: 0 PID: 304 Comm: hostapd Not tainted 3.16.0-rc7-abb+g64aa90f2 #8 [<c0014bb4>] (unwind_backtrace) from [<c0012314>] (show_stack+0x10/0x14) [<c0012314>] (show_stack) from [<c001d3f8>] (warn_slowpath_common+0x6c/0x8c) [<c001d3f8>] (warn_slowpath_common) from [<c001d4b4>] (warn_slowpath_null+0x1c/0x24) [<c001d4b4>] (warn_slowpath_null) from [<c03449a4>] (chandef_to_chanspec.isra.11+0x158/0x184) [<c03449a4>] (chandef_to_chanspec.isra.11) from [<c0348e00>] (brcmf_cfg80211_start_ap+0x1e4/0x614) [<c0348e00>] (brcmf_cfg80211_start_ap) from [<c04d1468>] (nl80211_start_ap+0x288/0x414) [<c04d1468>] (nl80211_start_ap) from [<c043d144>] (genl_rcv_msg+0x21c/0x38c) [<c043d144>] (genl_rcv_msg) from [<c043c740>] (netlink_rcv_skb+0xac/0xc0) [<c043c740>] (netlink_rcv_skb) from [<c043cf14>] (genl_rcv+0x20/0x34) [<c043cf14>] (genl_rcv) from [<c043c0a0>] (netlink_unicast+0x150/0x20c) [<c043c0a0>] (netlink_unicast) from [<c043c4b8>] (netlink_sendmsg+0x2b8/0x398) [<c043c4b8>] (netlink_sendmsg) from [<c04066a4>] (sock_sendmsg+0x84/0xa8) [<c04066a4>] (sock_sendmsg) from [<c0407c5c>] (___sys_sendmsg.part.29+0x268/0x278) [<c0407c5c>] (___sys_sendmsg.part.29) from [<c0408bdc>] (__sys_sendmsg+0x4c/0x7c) [<c0408bdc>] (__sys_sendmsg) from [<c000ec60>] (ret_fast_syscall+0x0/0x44) ---[ end trace 965ee2158c9905a2 ]--- Cc: stable@vger.kernel.org # v3.17 Reported-by:
Pontus Fuchs <pontusf@broadcom.com> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Stanislaw Gruszka authored
RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by:
Antti S. Lankila <alankila@bel.fi> Debugged-by:
Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
John W. Linville authored
Merge tag 'iwlwifi-for-john-2014-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Emmanuel Grumbach <egrumbach@gmail.com> says: "Two fixes here - we weren't updating mac80211 if a scan was cut short by RFKILL which confused cfg80211. As a result, the latter wouldn't allow to run another scan. Liad fixes a small bug in the firmware dump." Signed-off-by:
-
Liad Kaufman authored
The length counting previously done had an error in it, causing the length down the data dumping function to be shorter than it should be, causing the end of the data to get truncated off and lost. Cc: <stable@vger.kernel.org> [3.17+] Fixes: 67c65f2c ("iwlwifi: dump periphery registers to fw-error-dump") Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
This code existed but not for all the different FW APIs we support. Fix this. Signed-off-by:
-
- 10 Nov, 2014 5 commits
-
-
Hauke Mehrtens authored
phy_read and phy_write are not set for every phy any more sine this: commit d342b95d Author: Rafał Miłecki <zajec5@gmail.com> Date: Thu Jul 31 21:59:43 2014 +0200 b43: don't duplicate common PHY read/write ops b43_phy_copy() accesses phy_read and phy_write directly and will fail with some phys. This patch fixes the regression by using the b43_phy_read() and b43_phy_write() functions which should be used for read and write access. This should fix this bug report: https://bugzilla.kernel.org/show_bug.cgi?id=87731Reported-by:
Volker Kempter <v.kempter@pe.tu-clausthal.de> Tested-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Larry Finger authored
Changes in the vendor driver were added to rtlwifi, but some updates to rtl8192se were missed, and the driver could neither scan nor connect. There are other changes that will enhance performance, but this minimal set fix the basic functionality. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
There are typos in the handling of the descriptor pointers where the wrong descriptor is referenced. There is also an error in which the pointer is incremented twice. Signed-off-by:
-
Larry Finger authored
Device RTL8192EE uses a new form of trx flow. This fix sets up the descriptors correctly. Signed-off-by:
-
John W. Linville authored
Merge tag 'mac80211-for-john-2014-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "This has just one fix, for an issue with the CCMP decryption that can cause a kernel crash. I'm not sure it's remotely exploitable, but it's an important fix nonetheless." Signed-off-by:
-
- 06 Nov, 2014 1 commit
-
-
Ronald Wahl authored
Commit 7ec7c4a9 (mac80211: port CCMP to cryptoapi's CCM driver) introduced a regression when decrypting empty packets (data_len == 0). This will lead to backtraces like: (scatterwalk_start) from [<c01312f4>] (scatterwalk_map_and_copy+0x2c/0xa8) (scatterwalk_map_and_copy) from [<c013a5a0>] (crypto_ccm_decrypt+0x7c/0x25c) (crypto_ccm_decrypt) from [<c032886c>] (ieee80211_aes_ccm_decrypt+0x160/0x170) (ieee80211_aes_ccm_decrypt) from [<c031c628>] (ieee80211_crypto_ccmp_decrypt+0x1ac/0x238) (ieee80211_crypto_ccmp_decrypt) from [<c032ef28>] (ieee80211_rx_handlers+0x870/0x1d24) (ieee80211_rx_handlers) from [<c0330c7c>] (ieee80211_prepare_and_rx_handle+0x8a0/0x91c) (ieee80211_prepare_and_rx_handle) from [<c0331260>] (ieee80211_rx+0x568/0x730) (ieee80211_rx) from [<c01d3054>] (__carl9170_rx+0x94c/0xa20) (__carl9170_rx) from [<c01d3324>] (carl9170_rx_stream+0x1fc/0x320) (carl9170_rx_stream) from [<c01cbccc>] (carl9170_usb_tasklet+0x80/0xc8) (carl9170_usb_tasklet) from [<c00199dc>] (tasklet_hi_action+0x88/0xcc) (tasklet_hi_action) from [<c00193c8>] (__do_softirq+0xcc/0x200) (__do_softirq) from [<c0019734>] (irq_exit+0x80/0xe0) (irq_exit) from [<c0009c10>] (handle_IRQ+0x64/0x80) (handle_IRQ) from [<c000c3a0>] (__irq_svc+0x40/0x4c) (__irq_svc) from [<c0009d44>] (arch_cpu_idle+0x2c/0x34) Such packets can appear for example when using the carl9170 wireless driver because hardware sometimes generates garbage when the internal FIFO overruns. This patch adds an additional length check. Cc: stable@vger.kernel.org Fixes: 7ec7c4a9 ("mac80211: port CCMP to cryptoapi's CCM driver") Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by:
-
- 04 Nov, 2014 2 commits
-
-
John W. Linville authored
Merge tag 'mac80211-for-john-2014-11-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "This contains another small set of fixes for 3.18, these are all over the place and most of the bugs are old, one even dates back to the original mac80211 we merged into the kernel." Signed-off-by:
-
John W. Linville authored
Merge tag 'iwlwifi-for-john-2014-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Emmanuel Grumbach <egrumbach@gmail.com> says: "I fix here two issues that are related to the firmware loading flow. A user reported that he couldn't load the driver because the rfkill line was pulled up while we were running the calibrations. This was happening while booting the system: systemd was restoring the "disable wifi settings" and that raised an RFKILL interrupt during the calibration. Our driver didn't handle that properly and this is now fixed." Signed-off-by:
-
- 03 Nov, 2014 2 commits
-
-
Emmanuel Grumbach authored
If the RFkill interrupt fires while we calibrate, it would make the firmware fail and the driver wasn't able to recover. Change the flow so that the driver will kill the firmware in that case. Since we have now two flows that are calling trans_stop_device (the RFkill interrupt and the op_mode_mvm_start function) - we need to better sync this. Use the STATUS_DEVICE_ENABLED in the pcie transport in an atomic way to achieve this. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231 CC: <stable@vger.kernel.org> [3.10+] Reviewed-by:
-
Johannes Berg authored
Upon receiving the last fragment, all but the first fragment are freed, but the multicast check for statistics at the end of the function refers to the current skb (the last fragment) causing a use-after-free bug. Since multicast frames cannot be fragmented and we check for this early in the function, just modify that check to also do the accounting to fix the issue. Cc: stable@vger.kernel.org Reported-by:
Yosef Khyal <yosefx.khyal@intel.com> Signed-off-by:
-
- 30 Oct, 2014 9 commits
-
-
Larry Finger authored
An error in the code makes the allocated space for firmware to be too small. Signed-off-by:
-
Larry Finger authored
The new version of rtlwifi needs code in rtl92ce_get_desc() that returns the buffer address for read operations. Signed-off-by:
-
Larry Finger authored
The new version of rtlwifi needs code in rtl92se_get_desc() that returns the buffer address for read operations. Signed-off-by:
-
Larry Finger authored
Driver rtlwifi has been modified to call ieee80211_register_hw() from the probe routine; however, the existing call in the callback routine for deferred firmware loading was not removed. Signed-off-by:
-
Larry Finger authored
The recent changes in checking for Bluetooth status added some callbacks to code in rtlwifi. To make certain that all callbacks are defined, a dummy routine has been added to rtlwifi, and the drivers that need to use it are modified. Signed-off-by:
-
Marc Yang authored
During 11n RX reordering, if there is a hole in RX table, driver will not send packets to kernel until the rxreorder timer expires or the table is full. However, currently driver always restarts rxreorder timer when receiving a packet, which causes the timer hardly to expire. So while connected with to 11n AP in a busy environment, ping packets may get blocked for about 30 seconds. This patch fixes this timer restarting by ensuring rxreorder timer would only be restarted either timer is not set or start_win has changed. Signed-off-by:
Chin-Ran Lo <crlo@marvell.com> Signed-off-by:
Plus Chen <pchen@marvell.com> Signed-off-by:
Marc Yang <yangyang@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Dan Carpenter authored
The right shift operation has higher precedence than the mask so we left shift by "(i * 3)" and then immediately right shift by "(i * 3)" then we mask. It should be left shift, mask, and then right shift. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Cyril Brulebois authored
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle References: https://bugs.debian.org/766802Reported-by:
Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by:
Cyril Brulebois <kibi@debian.org> Acked-by:
-
Johannes Berg authored
When an interface is deleted, an ongoing hardware scan is canceled and the driver must abort the scan, at the very least reporting completion while the interface is removed. However, if it scheduled the work that might only run after everything is said and done, which leads to cfg80211 warning that the scan isn't reported as finished yet; this is no fault of the driver, it already did, but mac80211 hasn't processed it. To fix this situation, flush the delayed work when the interface being removed is the one that was executing the scan. Cc: stable@vger.kernel.org Reported-by:
Sujith Manoharan <sujith@msujith.org> Tested-by:
-
- 29 Oct, 2014 5 commits
-
-
Luciano Coelho authored
Due to the time it takes to process the beacon that started the CSA process, we may be late for the switch if we try to reach exactly beacon 0. To avoid that, use count - 1 when calculating the switch time. Cc: stable@vger.kernel.org Reported-by:
-
Luciano Coelho authored
If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Cc: stable@vger.kernel.org Reported-by:
-
Felix Fietkau authored
Userspace can add keys to an AP mode interface before start_ap has been called. If there have been no calls to start_ap/stop_ap in the mean time, the keys will still be around when the interface is brought down. Signed-off-by:
-
Junjie Mao authored
The driver is not released when ieee80211_register_hw fails in mac80211_hwsim_create_radio, leading to the access to the unregistered (and possibly freed) device in platform_driver_unregister: [ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 0.448292] ------------[ cut here ]------------ [ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50() [ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2 [ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000 [ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001 [ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c [ 0.454632] Call Trace: [ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20 [ 0.457748] [<79170bb3>] kobject_get+0x33/0x50 [ 0.458274] [<7925824f>] get_device+0xf/0x20 [ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0 [ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.469829] ---[ end trace ad8ac403ff8aef5c ]--- [ 0.470509] ------------[ cut here ]------------ [ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00() [ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS) [ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc [ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000 [ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a [ 0.477523] Call Trace: [ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30 [ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0 [ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.480479] ---[ end trace ad8ac403ff8aef5d ]--- [ 0.495478] BUG: unable to handle kernel paging request at 00200200 [ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 [ 0.496923] *pde = 00000000 [ 0.497290] Oops: 0002 [#1] [ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000 [ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0 [ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0 [ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70 [ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54 [ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690 [ 0.503773] Stack: [ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460 [ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8 [ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80 [ 0.505451] Call Trace: [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0 [ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54 [ 0.505451] CR2: 0000000000200200 [ 0.505451] ---[ end trace ad8ac403ff8aef5e ]--- [ 0.505451] Kernel panic - not syncing: Fatal exception Fixes: 9ea92774 ("mac80211_hwsim: Register and bind to driver") Reported-by:
Junjie Mao <eternal.n08@gmail.com> Signed-off-by:
-
Emmanuel Grumbach authored
mvm->cur_ucode wasn't set before we actually load the firmware. This caused issues when we boot in RFKILL since we get an RFKILL interrupt upon boot even before we load any firmware. This leads to issues since iwl_mvm_set_hw_rfkill_state (the RFKILL interrupts handler in mvm) relies on this variable. Fix this. Signed-off-by:
-
- 27 Oct, 2014 2 commits
-
-
John W. Linville authored
Merge tag 'mac80211-for-john-2014-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Here are a few fixes for the wireless stack: one fixes the RTS rate, one for a debugfs file, one to return the correct channel to userspace, a sanity check for a userspace value and the remaining two are just documentation fixes." Signed-off-by:
-
John W. Linville authored
Merge tag 'iwlwifi-for-john-2014-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Emmanuel Grumbach <egrumbach@gmail.com> says: "I revert here a patch that caused interoperability issues. dvm gets a fix for a bug that was reported by many users. Two minor fixes for BT Coex and platform power fix that helps reducing latency when the PCIe link goes to low power states." Signed-off-by:
-
