- 08 Dec, 2014 1 commit
-
-
Juergen Gross authored
Introduce two helper functions to safely read and write unsigned long values from or to memory when the access may fault because the mapping is non-present or read-only. These helpers can be used instead of open coded uses of __get_user() and __put_user() avoiding the need to do casts to fix sparse warnings. Use the helpers in page.h and p2m.c. This will fix the sparse warnings when doing "make C=1". Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
- 04 Dec, 2014 35 commits
-
-
Juergen Gross authored
Instead of checking at each call of set_phys_to_machine() whether a new p2m page has to be allocated due to writing an entry in a large invalid or identity area, just map those areas read only and react to a page fault on write by allocating the new page. This change will make the common path with no allocation much faster as it only requires a single write of the new mfn instead of walking the address translation tables and checking for the special cases. Suggested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Juergen Gross authored
At start of the day the Xen hypervisor presents a contiguous mfn list to a pv-domain. In order to support sparse memory this mfn list is accessed via a three level p2m tree built early in the boot process. Whenever the system needs the mfn associated with a pfn this tree is used to find the mfn. Instead of using a software walked tree for accessing a specific mfn list entry this patch is creating a virtual address area for the entire possible mfn list including memory holes. The holes are covered by mapping a pre-defined page consisting only of "invalid mfn" entries. Access to a mfn entry is possible by just using the virtual base address of the mfn list and the pfn as index into that list. This speeds up the (hot) path of determining the mfn of a pfn. Kernel build on a Dell Latitude E6440 (2 cores, HT) in 64 bit Dom0 showed following improvements: Elapsed time: 32:50 -> 32:35 System: 18:07 -> 17:47 User: 104:00 -> 103:30 Tested with following configurations: - 64 bit dom0, 8GB RAM - 64 bit dom0, 128 GB RAM, PCI-area above 4 GB - 32 bit domU, 512 MB, 8 GB, 43 GB (more wouldn't work even without the patch) - 32 bit domU, ballooning up and down - 32 bit domU, save and restore - 32 bit domU with PCI passthrough - 64 bit domU, 8 GB, 2049 MB, 5000 MB - 64 bit domU, ballooning up and down - 64 bit domU, save and restore - 64 bit domU with PCI passthrough Signed-off-by: -
Juergen Gross authored
Today get_phys_to_machine() is always called when the mfn for a pfn is to be obtained. Add a wrapper __pfn_to_mfn() as inline function to be able to avoid calling get_phys_to_machine() when possible as soon as the switch to a linear mapped p2m list has been done. Signed-off-by:
-
Juergen Gross authored
Introduces lookup_pmd_address() to get the address of the pmd entry related to a virtual address in the current address space. This function is needed for support of a virtual mapped sparse p2m list in xen pv domains, as we need the address of the pmd entry, not the one of the pte in that case. Signed-off-by:
-
Juergen Gross authored
When the physical memory configuration is initialized the p2m entries for not pouplated memory pages are set to "invalid". As those pages are beyond the hypervisor built p2m list the p2m tree has to be extended. This patch delays processing the extra memory related p2m entries during the boot process until some more basic memory management functions are callable. This removes the need to create new p2m entries until virtual memory management is available. Signed-off-by:
-
Juergen Gross authored
The m2p overrides are used to be able to find the local pfn for a foreign mfn mapped into the domain. They are used by driver backends having to access frontend data. As this functionality isn't used in early boot it makes no sense to initialize the m2p override functions very early. It can be done later without doing any harm, removing the need for allocating memory via extend_brk(). While at it make some m2p override functions static as they are only used internally. Signed-off-by:
-
Juergen Gross authored
Early in the boot process the memory layout of a pv-domain is changed to match the E820 map (either the host one for Dom0 or the Xen one) regarding placement of RAM and PCI holes. This requires removing memory pages initially located at positions not suitable for RAM and adding them later at higher addresses where no restrictions apply. To be able to operate on the hypervisor supported p2m list until a virtual mapped linear p2m list can be constructed, remapping must be delayed until virtual memory management is initialized, as the initial p2m list can't be extended unlimited at physical memory initialization time due to it's fixed structure. A further advantage is the reduction in complexity and code volume as we don't have to be careful regarding memory restrictions during p2m updates. Signed-off-by:
-
Juergen Gross authored
In arch/x86/xen/p2m.c three different allocation functions for obtaining a memory page are used: extend_brk(), alloc_bootmem_align() or __get_free_page(). Which of those functions is used depends on the progress of the boot process of the system. Introduce a common allocation routine selecting the to be called allocation routine dynamically based on the boot progress. This allows moving initialization steps without having to care about changing allocation calls. Signed-off-by:
-
Juergen Gross authored
Some functions in arch/x86/xen/p2m.c are used locally only. Make them static. Rearrange the functions in p2m.c to avoid forward declarations. Signed-off-by:
-
Juergen Gross authored
The source arch/x86/xen/p2m.c has some coding style issues. Fix them. Signed-off-by:
-
Boris Ostrovsky authored
When hardware supports APIC/x2APIC virtualization we don't need to use pirqs for MSI handling and instead use APIC since most APIC accesses (MMIO or MSR) will now be processed without VMEXITs. As an example, netperf on the original code produces this profile (collected wih 'xentrace -e 0x0008ffff -T 5'): 342 cpu_change 260 CPUID 34638 HLT 64067 INJ_VIRQ 28374 INTR 82733 INTR_WINDOW 10 NPF 24337 TRAP 370610 vlapic_accept_pic_intr 307528 VMENTRY 307527 VMEXIT 140998 VMMCALL 127 wrap_buffer After applying this patch the same test shows 230 cpu_change 260 CPUID 36542 HLT 174 INJ_VIRQ 27250 INTR 222 INTR_WINDOW 20 NPF 24999 TRAP 381812 vlapic_accept_pic_intr 166480 VMENTRY 166479 VMEXIT 77208 VMMCALL 81 wrap_buffer ApacheBench results (ab -n 10000 -c 200) improve by about 10% Signed-off-by:Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
-
Boris Ostrovsky authored
If the hardware supports APIC virtualization we may decide not to use pirqs and instead use APIC/x2APIC directly, meaning that we don't want to set x86_msi.setup_msi_irqs and x86_msi.teardown_msi_irq to Xen-specific routines. However, x2APIC is not set up by the time pci_xen_hvm_init() is called so we need to postpone setting these ops until later, when we know which APIC mode is used. (Note that currently x2APIC is never initialized on HVM guests. This may change in the future) Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
Jan Beulich authored
When a PF driver unloads, it may find it necessary to leave the VFs around simply because of pciback having marked them as assigned to a guest. Utilize a suitable notification to let go of the VFs, thus allowing the PF to go back into the state it was before its driver loaded (which in particular allows the driver to be loaded again with it being able to create the VFs anew, but which also allows to then pass through the PF instead of the VFs). Don't do this however for any VFs currently in active use by a guest. Signed-off-by:
Jan Beulich <jbeulich@suse.com> [v2: Removed the switch statement, moved it about] [v3: Redid it a bit differently] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
The commit "xen/pciback: Don't deadlock when unbinding." was using the version of pci_reset_function which would lock the device lock. That is no good as we can dead-lock. As such we swapped to using the lock-less version and requiring that the callers of 'pcistub_put_pci_dev' take the device lock. And as such this bug got exposed. Using the lock-less version is OK, except that we tried to use 'pci_restore_state' after the lock-less version of __pci_reset_function_locked - which won't work as 'state_saved' is set to false. Said 'state_saved' is a toggle boolean that is to be used by the sequence of a) pci_save_state/pci_restore_state or b) pci_load_and_free_saved_state/pci_restore_state. We don't want to use a) as the guest might have messed up the PCI configuration space and we want it to revert to the state when the PCI device was binded to us. Therefore we pick b) to restore the configuration space. We restore from our 'golden' version of PCI configuration space, when an: - Device is unbinded from pciback - Device is detached from a guest. Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
We have the pci_load_and_free_saved_state, and pci_store_saved_state but are missing the functionality to just load the state multiple times in the PCI device without having to free/save the state. This patch makes it possible to use this function. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
A little cleanup. No functional difference. Reviewed-by:
-
Konrad Rzeszutek Wilk authored
We had been printing it only if the device was built with debug enabled. But this information is useful in the field to troubleshoot. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Cleanup the function a bit - also include the id of the domain that is using the device. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Instead of open-coding it in drivers that want to double check that their functions are indeed holding the device lock. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
As commit 0a9fd015 'xen/pciback: Document the entry points for 'pcistub_put_pci_dev'' explained there are four entry points in this function. Two of them are when the user fiddles in the SysFS to unbind a device which might be in use by a guest or not. Both 'unbind' states will cause a deadlock as the the PCI lock has already been taken, which then pci_device_reset tries to take. We can simplify this by requiring that all callers of pcistub_put_pci_dev MUST hold the device lock. And then we can just call the lockless version of pci_device_reset. To make it even simpler we will modify xen_pcibk_release_pci_dev to quality whether it should take a lock or not - as it ends up calling xen_pcibk_release_pci_dev and needs to hold the lock. Reviewed-by:
-
Stefano Stabellini authored
Need to pass the pointer within the swiotlb internal buffer to the swiotlb library, that in the case of xen_unmap_single is dev_addr, not paddr. Signed-off-by:
-
Stefano Stabellini authored
In xen_swiotlb_sync_single we always call xen_dma_sync_single_for_cpu, even when we should call xen_dma_sync_single_for_device. Fix that. Signed-off-by:
-
Stefano Stabellini authored
On x86 truncation cannot occur because config XEN depends on X86_64 || (X86_32 && X86_PAE). On ARM truncation can occur without CONFIG_ARM_LPAE, when the dma operation involves foreign grants. However in that case the physical address returned by xen_bus_to_phys is actually invalid (there is no mfn to pfn tracking for foreign grants on ARM) and it is not used. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
-
Stefano Stabellini authored
xen_dma_unmap_page and xen_dma_sync_single_for_cpu take a dma_addr_t handle as argument, not a physical address. Signed-off-by:
-
Stefano Stabellini authored
Introduce support for new hypercall GNTTABOP_cache_flush. Use it to perform cache flashing on pages used for dma when necessary. If GNTTABOP_cache_flush is supported by the hypervisor, we don't need to bounce dma map operations that involve foreign grants and non-coherent devices. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com>
-
Stefano Stabellini authored
Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by:
-
Stefano Stabellini authored
Merge xen/mm32.c into xen/mm.c. As a consequence the code gets compiled on arm64 too. Signed-off-by:
-
Stefano Stabellini authored
In xen_dma_map_page, if the page is a local page, call the native map_page dma_ops. If the page is foreign, call __xen_dma_map_page that issues any required cache maintenane operations via hypercall. The reason for doing this is that the native dma_ops map_page could allocate buffers than need to be freed. If the page is foreign we don't call the native unmap_page dma_ops function, resulting in a memory leak. Suggested-by:
-
Stefano Stabellini authored
dev_addr is the machine address of the page. The new parameter can be used by the ARM and ARM64 implementations of xen_dma_map_page to find out if the page is a local page (pfn == mfn) or a foreign page (pfn != mfn). dev_addr could be retrieved again from the physical address, using pfn_to_mfn, but it requires accessing an rbtree. Since we already have the dev_addr in our hands at the call site there is no need to get the mfn twice. Signed-off-by:
-
Stefano Stabellini authored
Use is_device_dma_coherent to check whether we need to issue cache maintenance operations rather than checking on the existence of a particular dma_ops function for the device. This is correct because coherent devices don't need cache maintenance operations - arm_coherent_dma_ops does not set the hooks that we were previously checking for existance. Signed-off-by:
-
Stefano Stabellini authored
Introduce a boolean flag and an accessor function to check whether a device is dma_coherent. Set the flag from set_arch_dma_coherent_ops. Signed-off-by:
Russell King <linux@arm.linux.org.uk>
-
Stefano Stabellini authored
Introduce a boolean flag and an accessor function to check whether a device is dma_coherent. Set the flag from set_arch_dma_coherent_ops. Signed-off-by:
-
Stefano Stabellini authored
Remove code duplication in mm32.c by calling the native dma_ops if the page is a local page (not a foreign page). Use a simple pfn_valid(pfn) check to figure out if the page is local, exploiting the fact that dom0 is mapped 1:1, therefore pfn_valid always returns false when called on a foreign mfn. Suggested-by:
-
Stefano Stabellini authored
Dom0 is not actually capable of issuing outer_inv_range or outer_clean_range calls. Signed-off-by:
-
Stefano Stabellini authored
The feature has been removed from Xen. Also Linux cannot use it on ARM32 without CONFIG_ARM_LPAE. Signed-off-by:
-
- 01 Dec, 2014 2 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Two i915 regressions and one dual-gpu laptop radeon fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails drm/i915: Cancel vdd off work before suspend drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
-
- 30 Nov, 2014 1 commit
-
-
Chris Mason authored
Don Bailey noticed that our page zeroing for compression at end-io time isn't complete. This reworks a patch from Linus to push the zeroing into the zlib and lzo specific functions instead of trying to handle the corners inside btrfs_decompress_buf2page Signed-off-by:
Chris Mason <clm@fb.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reported-by:
Don A. Bailey <donb@securitymouse.com> cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 Nov, 2014 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Three fixlets from the ARM SoC camp: - correct irqdomain initialization for atmel-aic - correct error handling for device tree parsing in bcm controllers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map irqchip: atmel-aic: Fix irqdomain initialization
-
