This patch adds PCIe support for MT7986.
Signed-off-by: Jieyy Yang <jieyy.yang@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230106152845.88717-5-linux@fw-web.deSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds mmc support for MT7986.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20230106152845.88717-4-linux@fw-web.deSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds USB support for MT7986.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20230106152845.88717-3-linux@fw-web.deSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

For crypto support, add a crypto clock of the inline crypto engine and
expand the register size in the eMMC controller.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20221221104856.28770-1-allen-kh.cheng@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Configure the sound card on all MT8195 Cherry Tomato devices to
enable audio support.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922094908.41623-5-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The entire Cherry family has two digital microphones, for which
we use the generic dmic-codec, linked to the MT6359 PMIC.
Moreover, it uses a Realtek RT1019p amplifier for the speakers
and has either a Realtek RT5682i or RT5682s audio codec on I2C2:
specifically, RT5682i is found on Tomato's rev 1 and rev 2 boards,
while RT5682s is found in rev3 and rev4 boards.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922094908.41623-4-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This platform is able to use the Audio DSP embedded into the
MT8195 SoC: in preparation for adding audio support for Cherry,
add the ADSP related memory nodes and enable it.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922094908.41623-3-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

In preparation for adding audio support, enable the AFE HW with
the appropriate eTDM configuration and memory region.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922094908.41623-2-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The node names should be generic and DT schema expects certain pattern:

  mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dtb: pwmleds: 'keyboard-backlight' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221125144138.477198-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add aliases for the i2c and mmc nodes on the Asurada platform DT to
ensure that we get stable ids for those devices on userspace.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102190611.283546-6-nfraprado@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Enable audio support for the Asurada platform. This consists of the
machine sound card, the rt1015p codec for the speakers, the rt5682 codec
for the headset, and the dmic codec for the internal microphone.

Newer revisions of spherion and hayato use the rt5682s codec for the
headset instead, so the codecs and card compatible are added through
separate dtsi files to prepare for that.

HDMI audio support is left out for now since the DisplayPort chip
required isn't enabled yet.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221102190611.283546-5-nfraprado@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The asurada platform has an ANX7625 bridge connecting the DSI's output
to the internal eDP panel. Add and enable these devices in order to get
a usable internal display.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102190611.283546-4-nfraprado@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add the display backlight for the Asurada platform. It relies on the
display PWM controller, so also enable and configure this component.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102190611.283546-3-nfraprado@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add the regulators present on the Asurada platform that are used to
power the internal and external displays.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102190611.283546-2-nfraprado@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This SoC's AP subsystem has 8x Cortex-A53 CPUs, specifically,
four CPUs per cluster, with two CPU clusters.

Each CPU has:
 - A 32KB I-cache, 2-way set associative;
 - A 32KB D-cache, 4-way set associative.

Each cluster has a unified 1MB L2 cache, 16-way set associative.

With that in mind, add the appropriate properties needed to specify the
caches information for this SoC, which will now be correctly exported
to sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221206112330.78431-6-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This SoC features two clusters composed of:
 - 4x Cortex A53: 32KB I-cache, 2-way set associative,
                  32KB D-cache, 4-way set associative,
                  unified 1MB L2 cache, 16-way set associative;
 - 4x Cortex A73: 64KB I-cache and 64KB D-cache, 4-way set associative,
                  unified 1MB L2 cache, 16-way set associative;

With that in mind, add the appropriate properties needed to specify the
caches information for this SoC, which will now be correctly exported
to sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221206112330.78431-5-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This SoC features two clusters composed of:
 - 6x Cortex A55: 32KB I-cache and 32KB D-cache, 4-way set associative,
                  per-cpu 128KB L2 cache, 4-way set associative;
 - 2x Cortex A76: 64KB I-cache and 64KB D-cache, 4-way set associative,
                  per-cpu 256KB L2 cache, 8-way set associative;
Moreover, the two clusters are sharing a DSU L3 cache with size 1MB,
16-way set associative.

With that in mind, add the appropriate properties needed to specify the
caches information for this SoC, which will now be correctly exported
to sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221206112330.78431-4-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This SoC features two clusters composed of:
 - 4x Cortex A55: 32KB I-cache and 32KB D-cache, 4-way set associative,
                  per-cpu 128KB L2 cache, 4-way set associative;
 - 4x Cortex A76: 64KB I-cache and 64KB D-cache, 4-way set associative,
                  per-cpu 256KB L2 cache, 8-way set associative;
Moreover, the two clusters are sharing a DSU L3 cache with size 2MB,
16-way set associative.

With that in mind, add the appropriate properties needed to specify the
caches information for this SoC, which will now be correctly exported
to sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221206112330.78431-3-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This SoC features two clusters composed of:
 - 4x Cortex A55: 32KB I-cache and 32KB D-cache, 4-way set associative,
                  per-cpu 128KB L2 cache, 4-way set associative;
 - 4x Cortex A78: 64KB I-cache and 64KB D-cache, 4-way set associative,
                  per-cpu 256KB L2 cache, 8-way set associative;
Moreover, the two clusters are sharing a DSU L3 cache with size 2MB,
16-way set associative.

With that in mind, add the appropriate properties needed to specify the
caches information for this SoC, which will now be correctly exported
to sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221206112330.78431-2-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Remove the unnecessary pins-are-numbered property from
arm64 Mediatek DeviceTrees
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20221129023401.278780-6-bero@baylibre.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally. The 13 MHz clock is not a separate
oscillator.

Fix this by making the 13 MHz clock a divide-by-2 fixed factor clock,
taking its input from the main 26 MHz oscillator.

Fixes: 2e78620b ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-5-wenst@chromium.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.

On the MT8195 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.

Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.

Fixes: 37f25828 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-4-wenst@chromium.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.

On the MT8192 this divider is fixed to /2 and is not configurable.

Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.

Fixes: 48489980 ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-3-wenst@chromium.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.

On the MT8183 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.

Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.

Fixes: 5bc8e287 ("arm64: dts: mt8183: add systimer0 device node")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-2-wenst@chromium.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Assign power domain to the U3PHY1 T-PHY in otder to keep this PHY
alive after unused PD shutdown and to be able to completely cut
and restore power to it, for example, to save some power during
system suspend/sleep.

Fixes: 2b515194 ("arm64: dts: mt8195: Add power domains controller")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221214131117.108008-2-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Despite there being some flexibility regarding the P0/P1 connections,
especially for TL and PERI, we must use P1 clocks on pcie1 otherwise
we'll be dealing with unclocked access.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221214131117.108008-1-angelogioacchino.delregno@collabora.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add bindings for the Mediatek mt8365-evk board.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221213234346.2868828-2-bero@baylibre.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Kukui devices krane, kodana, and kakadu use detachable keyboards, which
only have switches to be registered.

Change the keyboard node's compatible of those boards to the newly
introduced "google,cros-ec-keyb-switches", which won't include matrix
properties.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20220527045353.2483042-1-hsinyi@chromium.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add dsi node for mt8186 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20221123135531.23221-5-allen-kh.cheng@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add iommu and smi nodes for mt8186 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20221123135531.23221-4-allen-kh.cheng@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add power domains controller for mt8186 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20221123135531.23221-3-allen-kh.cheng@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fix from Mark Brown:
 "One driver specific change here which handles the case where a SPI
  device for some reason tries to change the bus speed during a message
  on fsl_spi hardware, this should be very unusual"

* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl_spi: Don't change speed while chipselect is active

Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two core fixes here, one for a long standing race which some Qualcomm
  systems have started triggering with their UFS driver and another
  fixing a problem with supply lookup introduced by the fixes for devm
  related use after free issues that were introduced in this merge
  window"

* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix deadlock on regulator enable
  regulator: core: Fix resolve supply lookup issue

Pull coccicheck update from Julia Lawall:
 "Modernize use of grep in coccicheck:

  Use 'grep -E' instead of 'egrep'"

* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: use "grep -E" instead of "egrep"

Pull kernel hardening fixes from Kees Cook:

 - Fix CFI failure with KASAN (Sami Tolvanen)

 - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)

 - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
   Chancellor)

 - Ignore "contents" argument in LoadPin's LSM hook handling

 - Fix paste-o in /sys/kernel/warn_count API docs

 - Use READ_ONCE() consistently for oops/warn limit reading

* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  cfi: Fix CFI failure with KASAN
  exit: Use READ_ONCE() for all oops/warn limit reads
  security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
  lkdtm: cfi: Make PAC test work with GCC 7 and 8
  docs: Fix path paste-o for /sys/kernel/warn_count
  LoadPin: Ignore the "contents" argument of the LSM hooks

Pull pstore fixes from Kees Cook:

 - Switch pmsg_lock to an rt_mutex to avoid priority inversion (John
   Stultz)

 - Correctly assign mem_type property (Luca Stefani)

* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Properly assign mem_type property
  pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
  pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
  allocator, as it copes with that just as badly as the coherent
  allocator, and then add a check to make sure no one passes the flag
  ever again"

* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: reject GFP_COMP for noncoherent allocations
  ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations

Pull 9p updates from Dominique Martinet:

 - improve p9_check_errors to check buffer size instead of msize when
   possible (e.g. not zero-copy)

 - some more syzbot and KCSAN fixes

 - minor headers include cleanup

* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
  9p/client: fix data race on req->status
  net/9p: fix response size check in p9_check_errors()
  net/9p: distinguish zero-copy requests
  9p/xen: do not memcpy header into req->rc
  9p: set req refcount to zero to avoid uninitialized usage
  9p/net: Remove unneeded idr.h #include
  9p/fs: Remove unneeded idr.h #include