* The HP ZBook Fury 15/17 G7 Mobile Workstation are using ALC285 codec
   which is using 0x04 to control mute LED and 0x01 to control micmute LED.

 * The right channel speaker is no sound and it needs to expose GPIO1 for
   initialing AMP.

Add quirks to support them.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210106130549.100532-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume.  This
was worked around by disabling the default runtime PM via a denylist
entry.  Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited.  The
result was that disabling power_save_node feature suffices for the
runtime PM problem.

This patch implements the disablement of power_save_node feature in
VIA codec for the device.  It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.

Fixes: b529ef24 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the
same quirk as these other BOSS devices.

Without this quirk it is neither possible to capture audio from nor to
write audio to the RC-505. Both just result in an empty audio
stream. With these changes both capture and playback seem to work
quite fine. MIDI funtionality was not tested.
Tested-by: Harry Reinold <harry.reinold@posteo.de>
Signed-off-by: Timon Reinold <tirei@agon.one>
Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.oneSigned-off-by: Takashi Iwai <tiwai@suse.de>

The silent_stream_disable() function introduced by the commit
b1a50397 ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock.  This patch corrects it.

Fixes: b1a50397 ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: <stable@vger.kernel.org>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED
to enable mute and micmute LED. So apply the quirk to enable the LEDs.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201230125636.45028-1-kai.heng.feng@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add two "Intel Reference boad" SSID in the alc256.
Enable "power saving mode" and Enable "headset jack mode".
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5978d2267f034c28973d117925ec9c63@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same
quirk as other models with ALC287.
Signed-off-by: Manuel Jiménez <mjbfm99@me.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13Signed-off-by: Takashi Iwai <tiwai@suse.de>

The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.

[ Minor coding style fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

BOSS AD-10 requires the very same quirk like other BOSS devices to
enable the special implicit feedback mode.
Reported-and-tested-by: Martin Passing <martin@passing.name>
Link: https://lore.kernel.org/r/20201229083428.20467-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The calculation of in_cables and out_cables bitmaps are done with the
bit shift by the value from the descriptor, which is an arbitrary
value, and can lead to UBSAN shift-out-of-bounds warnings.

Fix it by filtering the bad descriptor values with the check of the
upper bound 0x10 (the cable bitmaps are 16 bits).

Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Dell platform SSID:0x0a58 change platform name.
Use the generic name instead for avoiding confusion.

Fixes: 150927c3 ("ALSA: hda/realtek - Supported Dell fixed type headset")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/efe7c196158241aa817229df7835d645@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Cannot adjust speaker's volume on Lenovo C940.
Applying the alc298_fixup_speaker_volume function can fix the issue.

[ Additional note: C940 has I2S amp for the speaker and this needs the
  same initialization as Dell machines.
  The patch was slightly modified so that the quirk entry is moved
  next to the corresponding Dell quirk entry. -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ea25b4e5c468491aa2e9d6cb1f2fced3@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This Acer Veriton N4640G/N6640G/N2510G desktops have 2 headphone
jacks(front and rear), and a separate Mic In jack.

The rear headphone jack is actually a line out jack but always silent
while playing audio. The front 'Mic In' also fails the jack sensing.
Apply the ALC269_FIXUP_LIFEBOOK to have all audio jacks to work as
expected.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201222150459.9545-2-chiu@endlessos.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Quanta NL3 laptop has both a headphone output jack and a headset
jack, on the right edge of the chassis.

The pin information suggests that both of these are at the Front.
The PulseAudio is confused to differentiate them so one of the jack
can neither get the jack sense working nor the audio output.

The ALC269_FIXUP_LIFEBOOK chained with ALC269_FIXUP_QUANTA_MUTE can
help to differentiate 2 jacks and get the 'Auto-Mute Mode' working
correctly.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201222150459.9545-1-chiu@endlessos.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback
like other similar BOSS devices. This patch adds this support.

[ rearranged the table entry in the ID order -- tiwai ]
Signed-off-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20201221215533.2511-1-oliphant@nostatic.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

ASUS PRIME TRX40 PRO-S mobo with 0b05:1918 needs the same quirk alias
for another ASUS mobo (0b05:1917) for the proper mixer mapping, etc.
Add the corresponding entry.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210783
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201221080159.24468-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Remove redundant comments
Signed-off-by: YangHui <yanghui.def@gmail.com>
Link: https://lore.kernel.org/r/1608531727-5433-1-git-send-email-yanghui.def@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

MSI-GP73 (with SSID 1462:1229) requires yet again
ALC1220_FIXUP_CLEVO_P950 quirk like other MSI models.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210793
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201220080943.24839-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

There are a few places that call round{up|down}_pow_of_two() with the
value zero, and this causes undefined behavior warnings.  Avoid
calling those macros if such a nonsense value is passed; it's a minor
optimization as well, as we handle it as either an error or a value to
be skipped, instead.

Reported-by: syzbot+33ef0b6639a8d2d42b4c@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218161730.26596-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The PCM hw_params core function tries to clear up the PCM buffer
before actually using for avoiding the information leak from the
previous usages or the usage before a new allocation.  It performs the
memset() with runtime->dma_bytes, but this might still leave some
remaining bytes untouched; namely, the PCM buffer size is aligned in
page size for mmap, hence runtime->dma_bytes doesn't necessarily cover
all PCM buffer pages, and the remaining bytes are exposed via mmap.

This patch changes the memory clearance to cover the all buffer pages
if the stream is supposed to be mmap-ready (that guarantees that the
buffer size is aligned in page size).
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Currently the standard memory allocator (snd_dma_malloc_pages*())
passes the byte size to allocate as is.  Most of the backends
allocates real pages, hence the actual allocations are aligned in page
size.  However, the genalloc doesn't seem assuring the size alignment,
hence it may result in the access outside the buffer when the whole
memory pages are exposed via mmap.

For avoiding such inconsistencies, this patch makes the allocation
size always to be aligned in page size.

Note that, after this change, snd_dma_buffer.bytes field contains the
aligned size, not the originally requested size.  This value is also
used for releasing the pages in return.
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some buggy firmware don't give the current sample rate but leaves
zero.  Handle this case more gracefully without warning but just skip
the current rate verification from the next time.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since commit d4cfb30f ("ALSA: pcm: Set per-card upper limit of PCM
buffer allocations") snd_pcm_lib_preallocate_dma_free() is a single line
function that has one caller, which is another single line function.

Clean this up a bit and remove snd_pcm_lib_preallocate_dma_free() and
directly call do_free_pages() from snd_pcm_lib_preallocate_free(). This is
a bit less boilerplate.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218153400.18394-1-lars@metafoo.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add VID to support native DSD reproduction on FiiO devices.
Tested-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Signed-off-by: Emilio Moretti <emilio.moretti@gmail.com>
Signed-off-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X9j7wdXSr4XyK7Bd@ryzen.localdomainSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since mmap for userspace is based on page alignment, add page alignment
for iram alloc from pool, otherwise, some good data located in the same
page of dmab->area maybe touched wrongly by userspace like pulseaudio.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1608221747-3474-1-git-send-email-yibin.gong@nxp.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This platform only supported iphone type headset.
It can't support Dell headset mode.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b97e971978034bc9b772a08ec91265e8@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Acer TravelMate laptops P648/P658 series with codec ALC282 only have
one physical jack for headset but there's a confusing lineout pin on
NID 0x1b reported. Audio applications hence misunderstand that there
are a speaker and a lineout, and take the lineout as the default audio
output.

Add a new quirk to remove the useless lineout and enable the pin 0x18
for jack sensing and headset microphone.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201216125200.27053-1-chiu@endlessos.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.11

There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.

This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.

 - Lots more cleanups and simplifications from Morimoto-san.
 - Support for some basic DPCM systems in the audio graph card from
   Sameer Pujar.
 - Remove some old pre-DT Freescale drivers for platforms that are now
   DT only.
 - Move selection of which Intel DSP implementation to use to boot time
   rather than requiring it to be selected at build time.
 - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
   Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
   Qualcomm SM8250 and simple GPIO based muxes.

syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.

Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.

Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

syzbot spotted a potential out-of-bounds shift in the USB-audio format
parser that receives the arbitrary shift value from the USB
descriptor.

Add a range check for avoiding the undefined behavior.

Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add pre-dsp download initialization for the DAC's used in the surround
sound configuration. Fixes issues of no audio on surround channels.

Fixes: 2e492b8e ("ALSA: hda/ca0132 - Add ZxR init commands")
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201211225504.4508-2-conmanx360@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add helper functions for the 8051 PLL PMU write verbs.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201211225504.4508-1-conmanx360@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge series "ASoC: SOF: Intel: fix to dsp state dump trace levels" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Small series that addresses a problem where DSP status dump
for a failure case, ends up being printed as as debug print. This
is important information for any bug report. While at it, the series
contains a few cleanups to related code.

Ranjani Sridharan (3):
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err

 sound/soc/sof/debug.c            |  2 +-
 sound/soc/sof/intel/byt.c        |  2 +-
 sound/soc/sof/intel/hda-loader.c | 19 +++++++++++++------
 sound/soc/sof/intel/hda.c        | 10 ++++------
 sound/soc/sof/loader.c           |  4 ++--
 sound/soc/sof/ops.c              |  2 +-
 sound/soc/sof/sof-priv.h         | 13 ++++++++-----
 7 files changed, 30 insertions(+), 22 deletions(-)

--
2.29.2

Merge series "ASoC: rt1015p: delay 300ms for waiting calibration" from Tzung-Bi Shih <tzungbi@google.com>:

The 1st patch moves SDB control from DAI ops trigger to DAPM event
(per review comments in v1).

The 2nd patch adds the 300ms delay for waiting calibration.

Changes from v2:
- Use gpiod_set_value_cansleep() instead of gpiod_set_value().
(https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-2-tzungbi@google.com/)
- Assuming the calibration state gets lost after system suspend.
(https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-3-tzungbi@google.com/)

Changes from v1:
(https://patchwork.kernel.org/project/alsa-devel/patch/20201209033742.3825973-1-tzungbi@google.com/)
- Move the delay from trigger to DAPM event.

Tzung-Bi Shih (2):
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration

 sound/soc/codecs/rt1015p.c | 69 ++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 37 deletions(-)

--
2.29.2.684.gfbc64c5ab5-goog

The check for infoframe transmit status in hdmi_infoframe_uptodate()
makes the assumption that packet buffer index is set to zero.

Align code with specification and explicitly set the index before
AC_VERB_GET_HDMI_DIP_XMIT. The packet index setting affects both
DIP-Data and DIP-XmitCtrl verbs.

There are no known cases where the old implementation has caused driver
to work incorrectly. This change is purely based on code review against
the specification (HDA spec rev1.0a).
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211131613.3271407-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add missing parameters to avoid W=1 error
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211102255.3189589-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>