- 20 Jul, 2017 1 commit
-
-
Greg Kroah-Hartman authored
This reverts commit 2e252fbf as it is obviously not correct. And it should have gone in through the x86 tree :( Reported-by:
Colin King <colin.king@canonical.com> Reported-by:
Ingo Molnar <mingo@kernel.org> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 Jul, 2017 39 commits
-
-
Anatolij Gustschin authored
Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Alan Tull <atull@kernel.org> Signed-off-by:
-
Anatolij Gustschin authored
Add a flag that is passed to the write_init() callback, indicating that the bitstream is compressed. The low-level driver will deal with the flag, or return an error, if compressed bitstreams are not supported. Signed-off-by:
-
Joel Holdsworth authored
Lattice Semiconductor Corporation is a manufacturer of integrated circuits and IP products, including low-power FPGAs, video connectivity devices and millimeter wave wireless products. Website: http://latticesemi.comSigned-off-by:
Joel Holdsworth <joel@airwebreathe.org.uk> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
-
Joshua Clayton authored
Speed up bit reversal by using hardware bit reversal Add extra code to handle less than 4byte remnants, if any Signed-off-by:
Joshua Clayton <stillcompiling@gmail.com> Signed-off-by:
-
Joshua Clayton authored
Add a function to reverse bytes within a 32 bit word. Operate on a u32 rather than individual bytes. Signed-off-by:
-
Joshua Clayton authored
Add support for Altera FPGA connected to an spi port to the evi devicetree file Signed-off-by:
-
Joshua Clayton authored
altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by:
-
Joshua Clayton authored
Describe an altera-passive-serial devicetree entry, required features Signed-off-by:
-
Anatolij Gustschin authored
Add a flag that is passed to the write_init() callback, indicating that the SPI bitstream starts with LSB first. SPI controllers usually send data with MSB first. If an FPGA expects bitstream data as LSB first, the data must be reversed either by the SPI controller or by the driver. Alternatively the bitstream could be prepared as bit-reversed to avoid the bit-swapping while sending. This flag indicates such bit-reversed SPI bitstream. The low-level driver will deal with the flag and perform bit-reversing if needed. Signed-off-by:
-
Vincent Legoll authored
No need to get into the submenu to disable all FPGA-related config entries Signed-off-by:
Vincent Legoll <vincent.legoll@gmail.com> Acked-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Moritz Fischer authored
This adds the binding documentation for the Xilinx LogiCORE PR Decoupler soft core. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by:
-
Guoqing Jiang authored
This macro is not used after commit 3b9ab374 ("ppdev: convert to y2038 safe"), so let's remove it. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
-
Arvind Yadav authored
charlcd_ops are not supposed to change at runtime. All functions working with charlcd_ops provided by <misc/charlcd.h> work with const charlcd_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 12750 560 362 13672 3568 drivers/auxdisplay/panel.o File size After adding 'const': text data bss dec hex filename 12942 368 362 13672 3568 drivers/auxdisplay/panel.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
Don't populate arrays on the stack but make them static. Makes the object code smaller. Also remove temporary variables that have hard coded array sizes and just use ARRAY_SIZE instead and wrap some lines that are wider than 80 chars to clean up some checkpatch warnings. Before: text data bss dec hex filename 11141 2008 64 13213 339d drivers/char/mwave/smapi.o After: text data bss dec hex filename 10697 2352 64 13113 3339 drivers/char/mwave/smapi.o Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Patrick Venture authored
This driver can be used on the aspeed ast2400 with minor modifications. Tested: ast2400 on quanta-q71l Signed-off-by:
Patrick Venture <venture@google.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Max virtual processor will be needed for 'extended' hypercalls supporting more than 64 vCPUs. While on it, unify on 'Hyper-V' in mshyperv.c as we currently have a mix, report acquired misc features as well. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Code is arch/x86/hyperv/ is only needed when CONFIG_HYPERV is set, the 'basic' support and detection lives in arch/x86/kernel/cpu/mshyperv.c which is included when CONFIG_HYPERVISOR_GUEST is set. Signed-off-by:
-
Stephen Hemminger authored
When iterating over incoming ring elements from the host, prefetch the next descriptor so that it is cache hot. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
Don't signal host if it has disabled interrupts for that ring buffer. Check the feature bit to see if host supports pending send size flag. Signed-off-by:
-
Stephen Hemminger authored
Don't need cached read index anymore now that packet iterator is used. The iterator has the original read index until the visible read_index is updated. Signed-off-by:
-
Stephen Hemminger authored
The function hv_signal_on_read was defined in hyperv.h and only used in one place in ring_buffer code. Clearer to just move it inline there. Signed-off-by:
-
Stephen Hemminger authored
The elements ring_data_start_offset and priv_write_index are not used. Signed-off-by:
-
Stephen Hemminger authored
With new iterator functions (and the double mapping) the ring buffer read function can be greatly simplified. Signed-off-by:
-
Logan Gunthorpe authored
Presently, the order of the block devices listed in /proc/devices is not entirely sequential. If a block device has a major number greater than BLKDEV_MAJOR_HASH_SIZE (255), it will be ordered as if its major were module 255. For example, 511 appears after 1. This patch cleans that up and prints each major number in the correct order, regardless of where they are stored in the hash table. In order to do this, we introduce BLKDEV_MAJOR_MAX as an artificial limit (chosen to be 512). It will then print all devices in major order number from 0 to the maximum. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
Logan Gunthorpe authored
Presently, the order of the char devices listed in /proc/devices is not entirely sequential. If a char device has a major number greater than CHRDEV_MAJOR_HASH_SIZE (255), it will be ordered as if its major were module 255. For example, 511 appears after 1. This patch cleans that up and prints each major number in the correct order, regardless of where they are stored in the hash table. In order to do this, we introduce CHRDEV_MAJOR_MAX as an artificial limit (chosen to be 511). It will then print all devices in major order number from 0 to the maximum. Signed-off-by:
-
Logan Gunthorpe authored
We've run into problems with running out of dynamicly assign char device majors particullarly on automated test systems with all-yes-configs. Roughly 40 dynamic assignments can be made with such kernels at this time while space is reserved for only 20. Currently, the kernel only prints a warning when dynamic allocation overflows the reserved region. And when this happens drivers that have fixed assignments can randomly fail depending on the order of initialization of other drivers. Thus, adding a new char device can cause unexpected failures in completely unrelated parts of the kernel. This patch solves the problem by extending dynamic major number allocations down from 511 once the 234-254 region fills up. Fixed majors already exist above 255 so the infrastructure to support high number majors is already in place. The patch reserves an additional 128 major numbers which should hopefully last us a while. Kernels that don't require more than 20 dynamic majors assigned (which is pretty typical) should not be affected by this change. Signed-off-by:
-
Tomas Winkler authored
Device 'new_id' interface is useful for testing of not yet published hardware on older kernels and for internally used device ids on simulation platforms. However currently with the device configuration held in device_id driver data as a pointer to mei_cfg structure it is hard, as one need to locate the address of the correct structure. A recommended way of doing that is to use and index instead of a pointer. This patch adds a new list of configuration mei_cfg_list[] indexed via enum mei_cfg_idx. In addition it cleanups ich platform naming, renames legacy generation to ich and what was ich to ich10. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Alexander Usyskin authored
On some platforms, currently Broxton, Apollo Lake and Kaby Lake, ME FW may be busy with internal bookkeeping and answering late to the start message. As a mitigation, the driver requests for a synchronous probing to prevent stalling of the overall boot process. For example, on a Apollo Lake platform the overall boot time has reduced from ~0.9 to ~0.6 seconds on average. Signed-off-by:
-
Dmitry Safonov authored
It was never used since addition of binder to linux mainstream tree. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Arve Hjønnevåg" <arve@android.com> Cc: Riley Andrews <riandrews@android.com> Cc: devel@driverdev.osuosl.org Signed-off-by:
Dmitry Safonov <dsafonov@virtuozzo.com> Signed-off-by:
-
Krzysztof Opasiak authored
Use rlimit() helper instead of manually writing whole chain from current task to rlim_cur Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
-
Todd Kjos authored
Remove global mutex and rely on fine-grained locking Signed-off-by:
Todd Kjos <tkjos@google.com> Signed-off-by:
-
Martijn Coenen authored
A race existed where one thread could register a death notification for a node, while another thread was cleaning up that node and sending out death notifications for its references, causing simultaneous access to ref->death because different locks were held. Signed-off-by:
Martijn Coenen <maco@google.com> Signed-off-by:
-
Todd Kjos authored
When printing transactions there were several race conditions that could cause a stale pointer to be deferenced. Fixed by reading the pointer once and using it if valid (which is safe). The transaction buffer also needed protection via proc lock, so it is only printed if we are holding the correct lock. Signed-off-by:
-
Todd Kjos authored
Use proc->outer_lock to protect the binder_ref structure. The outer lock allows functions operating on the binder_ref to do nested acquires of node and inner locks as necessary to attach refs to nodes atomically. Binder refs must never be accesssed without holding the outer lock. Signed-off-by:
-
Todd Kjos authored
Use the inner lock to protect thread accounting fields in proc structure: max_threads, requested_threads, requested_threads_started and ready_threads. Signed-off-by:
-
Martijn Coenen authored
This makes future changes to priority inheritance easier, since we want to be able to look at a thread's transaction stack when selecting a thread to inherit priority for. It also allows us to take just a single lock in a few paths, where we used to take two in succession. Signed-off-by:
-
Todd Kjos authored
proc->threads will need to be accessed with higher locks of other processes held so use proc->inner_lock to protect it. proc->tmp_ref now needs to be protected by proc->inner_lock. Signed-off-by:
-
Todd Kjos authored
When locks for binder_ref handling are added, proc->nodes will need to be modified while holding the outer lock Signed-off-by:
-
Todd Kjos authored
node->node_lock is used to protect elements of node. No need to acquire for fields that are invariant: debug_id, ptr, cookie. Signed-off-by:
-
