Implement the cpuv4 signed division. It is encoded as unsigned
division, but with off field set to 1. s390x has the necessary
instructions: dsgfr, dsgf and dsgr.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-9-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Implement the cpuv4 unconditional jump with 32-bit offset, which is
encoded as BPF_JMP32 | BPF_JA and stores the offset in the imm field.
Reuse the existing BPF_JMP | BPF_JA logic.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-8-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Implement the cpuv4 unconditional byte swap, which is encoded as
BPF_ALU64 | BPF_END | BPF_FROM_LE. Since s390x is big-endian, it's
the same as the existing BPF_ALU | BPF_END | BPF_FROM_LE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-7-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Implement the cpuv4 load with sign-extension, which is encoded as
BPF_MEMSX (and, for internal uses cases only, BPF_PROBE_MEMSX).

This is the same as BPF_MEM and BPF_PROBE_MEM, but with sign
extension instead of zero extension, and s390x has the necessary
instructions: lgb, lgh and lgf.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-6-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Implement the cpuv4 register-to-register move with sign extension. It
is distinguished from the normal moves by non-zero values in
insn->off, which determine the source size. s390x has instructions to
deal with all of them: lbr, lhr, lgbr, lghr and lgfr.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-5-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Prepare the ldsx test to run on big-endian systems by adding the
necessary endianness checks around narrow memory accesses.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-4-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

test_progs -t bind_perm,bpf_obj_pinning/mounted-str-rel fails when
the selftests directory is mounted under /mnt, which is a reasonable
thing to do when sharing the selftests residing on the host with a
virtual machine, e.g., using 9p.

The reason is that cgroup2 is mounted at /mnt and not unmounted,
causing subsequent tests that need to access the selftests directory
to fail.

Fix by unmounting it. The kernel maintains a mount stack, so this
reveals what was mounted there before. Introduce cgroup_workdir_mounted
in order to maintain idempotency. Make it thread-local in order to
support test_progs -j.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-3-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

On the architectures that use bpf_jit_needs_zext(), e.g., s390x, the
verifier incorrectly inserts a zero-extension after BPF_MEMSX, leading
to miscompilations like the one below:

      24:       89 1a ff fe 00 00 00 00 "r1 = *(s16 *)(r10 - 2);"       # zext_dst set
   0x3ff7fdb910e:       lgh     %r2,-2(%r13,%r0)                        # load halfword
   0x3ff7fdb9114:       llgfr   %r2,%r2                                 # wrong!
      25:       65 10 00 03 00 00 7f ff if r1 s> 32767 goto +3 <l0_1>   # check_cond_jmp_op()

Disable such zero-extensions. The JITs need to insert sign-extension
themselves, if necessary.
Suggested-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-2-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE

   - netfilter: fix entries val in rule reset audit log

   - eth: stmmac: fix incorrect rxq|txq_stats reference

  Previous releases - regressions:

   - ipv4: fix null-deref in ipv4_link_failure

   - netfilter:
      - fix several GC related issues
      - fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP

   - eth: team: fix null-ptr-deref when team device type is changed

   - eth: i40e: fix VF VLAN offloading when port VLAN is configured

   - eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB

  Previous releases - always broken:

   - core: fix ETH_P_1588 flow dissector

   - mptcp: fix several connection hang-up conditions

   - bpf:
      - avoid deadlock when using queue and stack maps from NMI
      - add override check to kprobe multi link attach

   - hsr: properly parse HSRv1 supervisor frames.

   - eth: igc: fix infinite initialization loop with early XDP redirect

   - eth: octeon_ep: fix tx dma unmap len values in SG

   - eth: hns3: fix GRE checksum offload issue"

* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
  igc: Expose tx-usecs coalesce setting to user
  octeontx2-pf: Do xdp_do_flush() after redirects.
  bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
  net: ena: Flush XDP packets on error.
  net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
  net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
  netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
  netfilter: nf_tables: fix memleak when more than 255 elements expired
  netfilter: nf_tables: disable toggling dormant table state more than once
  vxlan: Add missing entries to vxlan_get_size()
  net: rds: Fix possible NULL-pointer dereference
  team: fix null-ptr-deref when team device type is changed
  net: bridge: use DEV_STATS_INC()
  net: hns3: add 5ms delay before clear firmware reset irq source
  net: hns3: fix fail to delete tc flower rules during reset issue
  net: hns3: only enable unicast promisc when mac table full
  net: hns3: fix GRE checksum offload issue
  net: hns3: add cmdq check for vf periodic service task
  net: stmmac: fix incorrect rxq|txq_stats reference
  ...

Pull finegrained timestamp reverts from Christian Brauner:
 "Earlier this week we sent a few minor fixes for the multi-grained
  timestamp work in [1]. While we were polishing those up after Linus
  realized that there might be a nicer way to fix them we received a
  regression report in [2] that fine grained timestamps break gnulib
  tests and thus possibly other tools.

  The kernel will elide fine-grain timestamp updates when no one is
  actively querying for them to avoid performance impacts. So a sequence
  like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may
  result in timestamp f1 to be older than the final f2 timestamp even
  though f1 was last written too but the second write didn't update the
  timestamp.

  Such plotholes can lead to subtle bugs when programs compare
  timestamps. For example, the nap() function in [2] will estimate that
  it needs to wait one ns on a fine-grain timestamp enabled filesytem
  between subsequent calls to observe a timestamp change. But in general
  we don't update timestamps with more than one jiffie if we think that
  no one is actively querying for fine-grain timestamps to avoid
  performance impacts.

  While discussing various fixes the decision was to go back to the
  drawing board and ultimately to explore a solution that involves only
  exposing such fine-grained timestamps to nfs internally and never to
  userspace.

  As there are multiple solutions discussed the honest thing to do here
  is not to fix this up or disable it but to cleanly revert. The general
  infrastructure will probably come back but there is no reason to keep
  this code in mainline.

  The general changes to timestamp handling are valid and a good cleanup
  that will stay. The revert is fully bisectable"

Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1]
Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2]

* tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  Revert "fs: add infrastructure for multigrain timestamps"
  Revert "btrfs: convert to multigrain timestamps"
  Revert "ext4: switch to multigrain timestamps"
  Revert "xfs: switch to multigrain timestamps"
  Revert "tmpfs: add support for multigrain timestamps"

Pull powerpc fixes from Michael Ellerman:

 - A fix for breakpoint handling which was using get_user() while atomic

 - Fix the Power10 HASHCHK handler which was using get_user() while
   atomic

 - A few build fixes for issues caused by recent changes

Thanks to Benjamin Gray, Christophe Leroy, Kajol Jain, and Naveen N Rao.

* tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/dexcr: Move HASHCHK trap handler
  powerpc/82xx: Select FSL_SOC
  powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
  powerpc/watchpoints: Annotate atomic context in more places
  powerpc/watchpoint: Disable pagefaults when getting user instruction
  powerpc/watchpoints: Disable preemption in thread_change_pc()
  powerpc/perf/hv-24x7: Update domain value check

Pull xen fixes from Juergen Gross:

 - remove some unused functions in the Xen event channel handling

 - fix a regression (introduced during the merge window) when booting as
   Xen PV guest

 - small cleanup removing another strncpy() instance

* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/efi: refactor deprecated strncpy
  x86/xen: allow nesting of same lazy mode
  x86/xen: move paravirt lazy code
  arm/xen: remove lazy mode related definitions
  xen: simplify evtchn_do_upcall() call maze

Pull memblock test fixes from Mike Rapoport:
 "Fix several compilation errors and warnings in memblock tests"

* tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
  memblock tests: fix warning: "__ALIGN_KERNEL" redefined
  memblock tests: Fix compilation errors.

Pull sound fixes from Takashi Iwai:
 "A large collection of fixes around this time.

  All small and mostly trivial fixes.

   - Lots of fixes for the new -Wformat-truncation warnings

   - A fix in ALSA rawmidi core regression and UMP handling

   - Series of Cirrus codec fixes

   - ASoC Intel and Realtek codec fixes

   - Usual HD- and USB-audio quirks and AMD ASoC quirks"

* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
  ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
  ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
  ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
  ALSA: rawmidi: Fix NULL dereference at proc read
  ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
  ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
  ASoC: cs42l43: Add shared IRQ flag for shutters
  ASoC: imx-audmix: Fix return error with devm_clk_get()
  ASoC: hdaudio.c: Add missing check for devm_kstrdup
  ALSA: riptide: Fix -Wformat-truncation warning for longname string
  ALSA: cs4231: Fix -Wformat-truncation warning for longname string
  ALSA: ad1848: Fix -Wformat-truncation warning for longname string
  ALSA: hda: generic: Check potential mixer name string truncation
  ALSA: cmipci: Fix -Wformat-truncation warning
  ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
  ALSA: firewire: Fix -Wformat-truncation warning for longname string
  ALSA: xen: Fix -Wformat-truncation warning
  ALSA: opti9x: Fix -Wformat-truncation warning
  ALSA: es1688: Fix -Wformat-truncation warning
  ALSA: cs4236: Fix -Wformat-truncation warning
  ...

Merge tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "One patch to drop a non-existent alarm attribute in the nct6775 driver"

* tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix non-existent ALARM warning

Don't populate read-only const arrays on the stack, instead make them
static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230919093606.24446-1-colin.i.king@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

./drivers/dpll/dpll_netlink.c:847:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6605Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309190540.RFwfIgO7-lkp@intel.com/
Link: https://lore.kernel.org/r/20230919010305.120991-1-yang.lee@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Arseniy Krasnov says:

====================
vsock/virtio/vhost: MSG_ZEROCOPY preparations

this patchset is first of three parts of another big patchset for
MSG_ZEROCOPY flag support:
https://lore.kernel.org/netdev/20230701063947.3422088-1-AVKrasnov@sberdevices.ru/

During review of this series, Stefano Garzarella <sgarzare@redhat.com>
suggested to split it for three parts to simplify review and merging:

1) virtio and vhost updates (for fragged skbs) <--- this patchset
2) AF_VSOCK updates (allows to enable MSG_ZEROCOPY mode and read
   tx completions) and update for Documentation/.
3) Updates for tests and utils.

This series enables handling of fragged skbs in virtio and vhost parts.
Newly logic won't be triggered, because SO_ZEROCOPY options is still
impossible to enable at this moment (next bunch of patches from big
set above will enable it).
====================

Link: https://lore.kernel.org/r/20230916130918.4105122-1-avkrasnov@salutedevices.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This adds handling of MSG_ZEROCOPY flag on transmission path:

1) If this flag is set and zerocopy transmission is possible (enabled
   in socket options and transport allows zerocopy), then non-linear
   skb will be created and filled with the pages of user's buffer.
   Pages of user's buffer are locked in memory by 'get_user_pages()'.
2) Replaces way of skb owning: instead of 'skb_set_owner_sk_safe()' it
   calls 'skb_set_owner_w()'. Reason of this change is that
   '__zerocopy_sg_from_iter()' increments 'sk_wmem_alloc' of socket, so
   to decrease this field correctly, proper skb destructor is needed:
   'sock_wfree()'. This destructor is set by 'skb_set_owner_w()'.
3) Adds new callback to 'struct virtio_transport': 'can_msgzerocopy'.
   If this callback is set, then transport needs extra check to be able
   to send provided number of buffers in zerocopy mode. Currently, the
   only transport that needs this callback set is virtio, because this
   transport adds new buffers to the virtio queue and we need to check,
   that number of these buffers is less than size of the queue (it is
   required by virtio spec). vhost and loopback transports don't need
   this check.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

For tap device new skb is created and data from the current skb is
copied to it. This adds copying data from non-linear skb to new
the skb.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

For non-linear skb use its pages from fragment array as buffers in
virtio tx queue. These pages are already pinned by 'get_user_pages()'
during such skb creation.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
netfilter updates for net

The following three patches fix regressions in the netfilter subsystem:

1. Reject attempts to repeatedly toggle the 'dormant' flag in a single
   transaction.  Doing so makes nf_tables lose track of the real state
   vs. the desired state.  This ends with an attempt to unregister hooks
   that were never registered in the first place, which yields a splat.

2. Fix element counting in the new nftables garbage collection infra
   that came with 6.5:  More than 255 expired elements wraps a counter
   which results in memory leak.

3. Since 6.4 ipset can BUG when a set is renamed while a CREATE command
   is in progress, fix from Jozsef Kadlecsik.

* tag 'nf-23-09-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
  netfilter: nf_tables: fix memleak when more than 255 elements expired
  netfilter: nf_tables: disable toggling dormant table state more than once
====================

Link: https://lore.kernel.org/r/20230920084156.4192-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Several places in TC offload code assumed that the return from
 rhashtable_lookup_get_insert_fast() was always either NULL or a valid
 pointer to an existing entry, but in fact that function can return an
 error pointer.  In that case, perform the usual cleanup of the newly
 created entry, then pass up the error, rather than attempting to take a
 reference on the old entry.

Fixes: d902e1a7 ("sfc: bare bones TC offload on EF100")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230919183949.59392-1-edward.cree@amd.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.

Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.

This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.

How to test:
User can get the coalesce value using ethtool command.

Example command:
Get: ethtool -c <interface>

Previous output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

New output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

Fixes: 8c5ad0da ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sebastian Andrzej Siewior says:

====================
Add missing xdp_do_flush() invocations.

I've been looking at the drivers/ XDP users and noticed that some
XDP_REDIRECT user don't invoke xdp_do_flush() at the end.
====================

Link: https://lore.kernel.org/r/20230918153611.165722-1-bigeasy@linutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.

Invoke xdp_do_flush() before leaving NAPI.

Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.

Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.

Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).

Invoke xdp_do_flush() also in the error path.

Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70a ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull media fixes from Mauro Carvalho Chehab:

 - driver fixes due to incorrect fwnode_handle_put() call

 - bt8xx: bttv_risc_packed(): remove field checks

 - vb2: frame_vector.c: replace WARN_ONCE with a comment

 - imx219: a couple typo fixes and perform a full mode set
   unconditionally

 - uvcvideo: Fix OOB read

 - some dependency fixes

* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
  media: vb2: frame_vector.c: replace WARN_ONCE with a comment
  media: uvcvideo: Fix OOB read
  media: bt8xx: bttv_risc_packed(): remove field checks
  media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
  media: i2c: imx219: Perform a full mode set unconditionally
  media: i2c: imx219: Fix crop rectangle setting when changing format
  media: i2c: imx219: Fix a typo referring to a wrong variable
  media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
  media: ivsc: Depend on VIDEO_DEV
  media: via: Use correct dependency for camera sensor drivers
  media: v4l: Use correct dependency for camera sensor drivers
  media: pci: ivsc: Select build dependencies

Pull btrfs fixes from David Sterba:
 "A few more followup fixes to the directory listing.

  People have noticed different behaviour compared to other filesystems
  after changes in 6.5. This is now unified to more "logical" and
  expected behaviour while still within POSIX. And a few more fixes for
  stable.

   - change behaviour of readdir()/rewinddir() when new directory
     entries are created after opendir(), properly tracking the last
     entry

   - fix race in readdir when multiple threads can set the last entry
     index for a directory

  Additionally:

   - use exclusive lock when direct io might need to drop privs and call
     notify_change()

   - don't clear uptodate bit on page after an error, this may lead to a
     deadlock in subpage mode

   - fix waiting pattern when multiple readers block on Merkle tree
     data, switch to folios"

* tag 'for-6.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix race between reading a directory and adding entries to it
  btrfs: refresh dir last index during a rewinddir(3) call
  btrfs: set last dir index to the current last index when opening dir
  btrfs: don't clear uptodate on write errors
  btrfs: file_remove_privs needs an exclusive lock in direct io write
  btrfs: convert btrfs_read_merkle_tree_page() to use a folio

Pull spi fixes from Mark Brown:
 "A small collection of fixes, plus a new device ID for Intel Granite
  Rapids systems.

  The fix for the i.MX driver is fairly urgent, it's fixing a data
  corruption issue when bits per word isn't 8.

  There's also one fix which was queued but not sent for v6.4 due to
  being minor and arriving at the end of the release"

* tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: imx: Take in account bits per word instead of assuming 8-bits
  spi: intel-pci: Add support for Granite Rapids SPI serial flash
  spi: stm32: add a delay before SPI disable
  spi: nxp-fspi: reset the FLSHxCR1 registers
  spi: zynqmp-gqspi: fix clock imbalance on probe failure

Merge tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix for the tps6287x driver which was incorrectly specifying the
  field for voltage range selection leading to incorrect voltages being
  set"

* tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix voltage range selection

This reverts commit ffb6cf19.

Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.

Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

This reverts commit 50e9ceef.

Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.

Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

This reverts commit 0269b585.

Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.

Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

This reverts commit e44df266.

Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.

Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

This reverts commit d48c3397.

Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.

Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Merge tag 'asoc-fix-v6.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

Quite a large collection of fixes, with numbers boosted by multiple
vendors sending multi-patch serieses.  Nothing super major, and also one
device quirk.