Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Huawei B593u-12

 - added support for virt board aligned to QEMU MIPS virt board

 - added support for doing DMA coherence on a per device base

 - reworked handling of RALINK SoCs

 - cleanup for Loongon64 barriers

 - removed deprecated support for MIPS_CMP SMP handling method

 - removed support Sibyte CARMEL and CHRINE boards

 - cleanups and fixes

* tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: uprobes: Restore thread.trap_nr
  MIPS: Don't clear _PAGE_SPECIAL in _PAGE_CHG_MASK
  MIPS: Sink body of check_bugs_early() into its only call site
  MIPS: Mark check_bugs() as __init
  Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
  MIPS: octeon_switch: Remove duplicated labels
  MIPS: loongson2ef: Add missing break in cs5536_isa
  MIPS: Remove set_swbp() in uprobes.c
  MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
  MIPS: fw: Allow firmware to pass a empty env
  MIPS: Remove deprecated CONFIG_MIPS_CMP
  MIPS: lantiq: remove unused function declaration
  MIPS: Drop unused positional parameter in local_irq_{dis,en}able
  MIPS: mm: Remove local_cache_flush_page
  MIPS: Remove no longer used ide.h
  MIPS: mm: Remove unused *cache_page_indexed flush functions
  MIPS: generic: Enable all CPUs supported by virt board in Kconfig
  MIPS: Add board config for virt board
  MIPS: Octeon: Disable CVMSEG by default on other platforms
  MIPS: Loongson: Don't select platform features with CPU
  ...

Pull sh updates from John Paul Adrian Glaubitz:
 "This is a bit larger than my previous one and mainly consists of
  clean-up work in the arch/sh directory by Geert Uytterhoeven and Randy
  Dunlap.

  Additionally, this fixes a bug in the Storage Queue code that was
  discovered while I was reviewing a patch to switch the code to the
  bitmap API by Christophe Jaillet.

  So this contains both a fix for the original bug in the Storage Queue
  code that can be backported later as well as the Christophe's patch to
  swich the code to the bitmap API.

  Summary:

   - Use generic GCC library routines

   - sq: Use the bitmap API when applicable

   - sq: Fix incorrect element size for allocating bitmap buffer

   - pci: Remove unused variable in SH-7786 PCI Express code

   - mcount.S: fix build error when PRINTK is not enabled

   - remove sh5/sh64 last fragments

   - math-emu: fix macro redefined warning

   - init: use OF_EARLY_FLATTREE for early init

   - nmi_debug: fix return value of __setup handler

   - SH2007: drop the bad URL info"

* tag 'sh-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: Replace <uapi/asm/types.h> by <asm-generic/int-ll64.h>
  sh: Use generic GCC library routines
  sh: sq: Use the bitmap API when applicable
  sh: sq: Fix incorrect element size for allocating bitmap buffer
  sh: pci: Remove unused variable in SH-7786 PCI Express code
  sh: mcount.S: fix build error when PRINTK is not enabled
  sh: remove sh5/sh64 last fragments
  sh: math-emu: fix macro redefined warning
  sh: init: use OF_EARLY_FLATTREE for early init
  sh: nmi_debug: fix return value of __setup handler
  sh: SH2007: drop the bad URL info

Pull xen updates from Juergen Gross:

 - some cleanups in the Xen blkback driver

 - fix potential sleeps under lock in various Xen drivers

* tag 'for-linus-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/blkback: move blkif_get_x86_*_req() into blkback.c
  xen/blkback: simplify free_persistent_gnts() interface
  xen/blkback: remove stale prototype
  xen/blkback: fix white space code style issues
  xen/pvcalls: don't call bind_evtchn_to_irqhandler() under lock
  xen/scsiback: don't call scsiback_free_translation_entry() under lock
  xen/pciback: don't call pcistub_device_put() under lock

Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - PCI passthrough for Hyper-V confidential VMs (Michael Kelley)

 - Hyper-V VTL mode support (Saurabh Sengar)

 - Move panic report initialization code earlier (Long Li)

 - Various improvements and bug fixes (Dexuan Cui and Michael Kelley)

* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
  PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
  Drivers: hv: move panic report code from vmbus to hv early init code
  x86/hyperv: VTL support for Hyper-V
  Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
  x86/hyperv: Make hv_get_nmi_reason public
  x86/hyperv: Add VTL specific structs and hypercalls
  x86/init: Make get/set_rtc_noop() public
  x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
  x86/hyperv: Add callback filter to cpumask_to_vpset()
  Drivers: hv: vmbus: Remove the per-CPU post_msg_page
  clocksource: hyper-v: make sure Invariant-TSC is used if it is available
  PCI: hv: Enable PCI pass-thru devices in Confidential VMs
  Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
  hv_netvsc: Remove second mapping of send and recv buffers
  Drivers: hv: vmbus: Remove second way of mapping ring buffers
  Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
  swiotlb: Remove bounce buffer remapping for Hyper-V
  Driver: VMBus: Add Devicetree support
  dt-bindings: bus: Add Hyper-V VMBus
  Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio,vhost,vdpa: features, fixes, and cleanups:

   - reduction in interrupt rate in virtio

   - perf improvement for VDUSE

   - scalability for vhost-scsi

   - non power of 2 ring support for packed rings

   - better management for mlx5 vdpa

   - suspend for snet

   - VIRTIO_F_NOTIFICATION_DATA

   - shared backend with vdpa-sim-blk

   - user VA support in vdpa-sim

   - better struct packing for virtio

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits)
  vhost_vdpa: fix unmap process in no-batch mode
  MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS
  tools/virtio: fix build caused by virtio_ring changes
  virtio_ring: add a struct device forward declaration
  vdpa_sim_blk: support shared backend
  vdpa_sim: move buffer allocation in the devices
  vdpa/snet: use likely/unlikely macros in hot functions
  vdpa/snet: implement kick_vq_with_data callback
  virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support
  virtio: add VIRTIO_F_NOTIFICATION_DATA feature support
  vdpa/snet: support the suspend vDPA callback
  vdpa/snet: support getting and setting VQ state
  MAINTAINERS: add vringh.h to Virtio Core and Net Drivers
  vringh: address kdoc warnings
  vdpa: address kdoc warnings
  virtio_ring: don't update event idx on get_buf
  vdpa_sim: add support for user VA
  vdpa_sim: replace the spinlock with a mutex to protect the state
  vdpa_sim: use kthread worker
  vdpa_sim: make devices agnostic for work management
  ...

Pull pstore update from Kees Cook:

 - Revert pmsg_lock back to a normal mutex (John Stultz)

* tag 'pstore-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Revert pmsg_lock back to a normal mutex

Pull hardening update from Kees Cook:

 - Fix kheaders array declaration to avoid tripping FORTIFY_SOURCE

* tag 'hardening-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kheaders: Use array declaration instead of char

Pull sysctl updates from Luis Chamberlain:
 "This only does a few sysctl moves from the kernel/sysctl.c file, the
  rest of the work has been put towards deprecating two API calls which
  incur recursion and prevent us from simplifying the registration
  process / saving memory per move. Most of the changes have been
  soaking on linux-next since v6.3-rc3.

  I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's
  feedback that we should see if we could *save* memory with these moves
  instead of incurring more memory. We currently incur more memory since
  when we move a syctl from kernel/sysclt.c out to its own file we end
  up having to add a new empty sysctl used to register it. To achieve
  saving memory we want to allow syctls to be passed without requiring
  the end element being empty, and just have our registration process
  rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls
  would make the sysctl registration pretty brittle, hard to read and
  maintain as can be seen from Meng Tang's efforts to do just this [0].
  Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations
  also implies doing the work to deprecate two API calls which use
  recursion in order to support sysctl declarations with subdirectories.

  And so during this development cycle quite a bit of effort went into
  this deprecation effort. I've annotated the following two APIs are
  deprecated and in few kernel releases we should be good to remove
  them:

   - register_sysctl_table()
   - register_sysctl_paths()

  During this merge window we should be able to deprecate and unexport
  register_sysctl_paths(), we can probably do that towards the end of
  this merge window.

  Deprecating register_sysctl_table() will take a bit more time but this
  pull request goes with a few example of how to do this.

  As it turns out each of the conversions to move away from either of
  these two API calls *also* saves memory. And so long term, all these
  changes *will* prove to have saved a bit of memory on boot.

  The way I see it then is if remove a user of one deprecated call, it
  gives us enough savings to move one kernel/sysctl.c out from the
  generic arrays as we end up with about the same amount of bytes.

  Since deprecating register_sysctl_table() and register_sysctl_paths()
  does not require maintainer coordination except the final unexport
  you'll see quite a bit of these changes from other pull requests, I've
  just kept the stragglers after rc3"

Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0]

* tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits)
  fs: fix sysctls.c built
  mm: compaction: remove incorrect #ifdef checks
  mm: compaction: move compaction sysctl to its own file
  mm: memory-failure: Move memory failure sysctls to its own file
  arm: simplify two-level sysctl registration for ctl_isa_vars
  ia64: simplify one-level sysctl registration for kdump_ctl_table
  utsname: simplify one-level sysctl registration for uts_kern_table
  ntfs: simplfy one-level sysctl registration for ntfs_sysctls
  coda: simplify one-level sysctl registration for coda_table
  fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls
  xfs: simplify two-level sysctl registration for xfs_table
  nfs: simplify two-level sysctl registration for nfs_cb_sysctls
  nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
  lockd: simplify two-level sysctl registration for nlm_sysctls
  proc_sysctl: enhance documentation
  xen: simplify sysctl registration for balloon
  md: simplify sysctl registration
  hv: simplify sysctl registration
  scsi: simplify sysctl registration with register_sysctl()
  csky: simplify alignment sysctl registration
  ...

Pull module updates from Luis Chamberlain:
 "The summary of the changes for this pull requests is:

   - Song Liu's new struct module_memory replacement

   - Nick Alcock's MODULE_LICENSE() removal for non-modules

   - My cleanups and enhancements to reduce the areas where we vmalloc
     module memory for duplicates, and the respective debug code which
     proves the remaining vmalloc pressure comes from userspace.

  Most of the changes have been in linux-next for quite some time except
  the minor fixes I made to check if a module was already loaded prior
  to allocating the final module memory with vmalloc and the respective
  debug code it introduces to help clarify the issue. Although the
  functional change is small it is rather safe as it can only *help*
  reduce vmalloc space for duplicates and is confirmed to fix a bootup
  issue with over 400 CPUs with KASAN enabled. I don't expect stable
  kernels to pick up that fix as the cleanups would have also had to
  have been picked up. Folks on larger CPU systems with modules will
  want to just upgrade if vmalloc space has been an issue on bootup.

  Given the size of this request, here's some more elaborate details:

  The functional change change in this pull request is the very first
  patch from Song Liu which replaces the 'struct module_layout' with a
  new 'struct module_memory'. The old data structure tried to put
  together all types of supported module memory types in one data
  structure, the new one abstracts the differences in memory types in a
  module to allow each one to provide their own set of details. This
  paves the way in the future so we can deal with them in a cleaner way.
  If you look at changes they also provide a nice cleanup of how we
  handle these different memory areas in a module. This change has been
  in linux-next since before the merge window opened for v6.3 so to
  provide more than a full kernel cycle of testing. It's a good thing as
  quite a bit of fixes have been found for it.

  Jason Baron then made dynamic debug a first class citizen module user
  by using module notifier callbacks to allocate / remove module
  specific dynamic debug information.

  Nick Alcock has done quite a bit of work cross-tree to remove module
  license tags from things which cannot possibly be module at my request
  so to:

   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area is
      active with no clear solution in sight.

   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags

  In so far as a) is concerned, although module license tags are a no-op
  for non-modules, tools which would want create a mapping of possible
  modules can only rely on the module license tag after the commit
  8b41fc44 ("kbuild: create modules.builtin without
  Makefile.modbuiltin or tristate.conf").

  Nick has been working on this *for years* and AFAICT I was the only
  one to suggest two alternatives to this approach for tooling. The
  complexity in one of my suggested approaches lies in that we'd need a
  possible-obj-m and a could-be-module which would check if the object
  being built is part of any kconfig build which could ever lead to it
  being part of a module, and if so define a new define
  -DPOSSIBLE_MODULE [0].

  A more obvious yet theoretical approach I've suggested would be to
  have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
  well but that means getting kconfig symbol names mapping to modules
  always, and I don't think that's the case today. I am not aware of
  Nick or anyone exploring either of these options. Quite recently Josh
  Poimboeuf has pointed out that live patching, kprobes and BPF would
  benefit from resolving some part of the disambiguation as well but for
  other reasons. The function granularity KASLR (fgkaslr) patches were
  mentioned but Joe Lawrence has clarified this effort has been dropped
  with no clear solution in sight [1].

  In the meantime removing module license tags from code which could
  never be modules is welcomed for both objectives mentioned above. Some
  developers have also welcomed these changes as it has helped clarify
  when a module was never possible and they forgot to clean this up, and
  so you'll see quite a bit of Nick's patches in other pull requests for
  this merge window. I just picked up the stragglers after rc3. LWN has
  good coverage on the motivation behind this work [2] and the typical
  cross-tree issues he ran into along the way. The only concrete blocker
  issue he ran into was that we should not remove the MODULE_LICENSE()
  tags from files which have no SPDX tags yet, even if they can never be
  modules. Nick ended up giving up on his efforts due to having to do
  this vetting and backlash he ran into from folks who really did *not
  understand* the core of the issue nor were providing any alternative /
  guidance. I've gone through his changes and dropped the patches which
  dropped the module license tags where an SPDX license tag was missing,
  it only consisted of 11 drivers. To see if a pull request deals with a
  file which lacks SPDX tags you can just use:

    ./scripts/spdxcheck.py -f \
	$(git diff --name-only commid-id | xargs echo)

  You'll see a core module file in this pull request for the above, but
  that's not related to his changes. WE just need to add the SPDX
  license tag for the kernel/module/kmod.c file in the future but it
  demonstrates the effectiveness of the script.

  Most of Nick's changes were spread out through different trees, and I
  just picked up the slack after rc3 for the last kernel was out. Those
  changes have been in linux-next for over two weeks.

  The cleanups, debug code I added and final fix I added for modules
  were motivated by David Hildenbrand's report of boot failing on a
  systems with over 400 CPUs when KASAN was enabled due to running out
  of virtual memory space. Although the functional change only consists
  of 3 lines in the patch "module: avoid allocation if module is already
  present and ready", proving that this was the best we can do on the
  modules side took quite a bit of effort and new debug code.

  The initial cleanups I did on the modules side of things has been in
  linux-next since around rc3 of the last kernel, the actual final fix
  for and debug code however have only been in linux-next for about a
  week or so but I think it is worth getting that code in for this merge
  window as it does help fix / prove / evaluate the issues reported with
  larger number of CPUs. Userspace is not yet fixed as it is taking a
  bit of time for folks to understand the crux of the issue and find a
  proper resolution. Worst come to worst, I have a kludge-of-concept [3]
  of how to make kernel_read*() calls for modules unique / converge
  them, but I'm currently inclined to just see if userspace can fix this
  instead"

Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]

* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
  module: add debugging auto-load duplicate module support
  module: stats: fix invalid_mod_bytes typo
  module: remove use of uninitialized variable len
  module: fix building stats for 32-bit targets
  module: stats: include uapi/linux/module.h
  module: avoid allocation if module is already present and ready
  module: add debug stats to help identify memory pressure
  module: extract patient module check into helper
  modules/kmod: replace implementation with a semaphore
  Change DEFINE_SEMAPHORE() to take a number argument
  module: fix kmemleak annotations for non init ELF sections
  module: Ignore L0 and rename is_arm_mapping_symbol()
  module: Move is_arm_mapping_symbol() to module_symbol.h
  module: Sync code of is_arm_mapping_symbol()
  scripts/gdb: use mem instead of core_layout to get the module address
  interconnect: remove module-related code
  interconnect: remove MODULE_LICENSE in non-modules
  zswap: remove MODULE_LICENSE in non-modules
  zpool: remove MODULE_LICENSE in non-modules
  x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
  ...

Commit 75cff725 ("driver core: bus: mark the struct bus_type for
sysfs callbacks as constant") missed at least one case - the CDX bus
driver.  Probably because Greg didn't notice the build failure, because
it only ends up being enabled on arm64.

And I missed it during the merge, because while I do arm64 builds these
days, I don't do them in between each pull.  So it took a while for me
to notice the breakage, rather than me just fixing it in the driver core
merge that brought this failure case in.

Maybe we should remove the CDX_BUS dependency on arm64 when COMPILE_TEST
is on?

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nipun Gupta <nipun.gupta@amd.com>
Cc: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc drivers updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystems for
  6.4-rc1.

  It's pretty big, but due to the removal of pcmcia drivers, almost
  breaks even for number of lines added vs. removed, a nice change.

  Included in here are:

   - removal of unused PCMCIA drivers (finally!)

   - Interconnect driver updates and additions

   - Lots of IIO driver updates and additions

   - MHI driver updates

   - Coresight driver updates

   - NVMEM driver updates, which required some OF updates

   - W1 driver updates and a new maintainer to manage the subsystem

   - FPGA driver updates

   - New driver subsystem, CDX, for AMD systems

   - lots of other small driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
  mcb-lpc: Reallocate memory region to avoid memory overlapping
  mcb-pci: Reallocate memory region to avoid memory overlapping
  mcb: Return actual parsed size when reading chameleon table
  kernel/configs: Drop Android config fragments
  virt: acrn: Replace obsolete memalign() with posix_memalign()
  spmi: Add a check for remove callback when removing a SPMI driver
  spmi: fix W=1 kernel-doc warnings
  spmi: mtk-pmif: Drop of_match_ptr for ID table
  spmi: pmic-arb: Convert to platform remove callback returning void
  spmi: mtk-pmif: Convert to platform remove callback returning void
  spmi: hisi-spmi-controller: Convert to platform remove callback returning void
  w1: gpio: remove unnecessary ENOMEM messages
  w1: omap-hdq: remove unnecessary ENOMEM messages
  w1: omap-hdq: add SPDX tag
  w1: omap-hdq: allow compile testing
  w1: matrox: remove unnecessary ENOMEM messages
  w1: matrox: use inline over __inline__
  w1: matrox: switch from asm to linux header
  w1: ds2482: do not use assignment in if condition
  w1: ds2482: drop unnecessary header
  ...

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...

Pull staging driver updates from Greg KH:
 "Here is the large set of staging driver updates for 6.4-rc1. Once
  again, we removed more code than was added, a nice trend.

  It was a calm cycle, mostly all just small coding style cleanups,
  included in here are:

   - removal of the greybus loopback testing tools, userspace code that
     didn't belong in a driver subdirectory and was causing problems for
     some build systems

   - platform remove callback cleanups

   - rtl8192e huge cleanups

   - other small staging driver cleanups.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (185 commits)
  staging: rtl8192e: Fix W_DISABLE# does not work after stop/start
  staging: rtl8192e: Remove unchanged variables bfsync_processing and more
  staging: rtl8192e: Remove unchanged variable frame_sync_monitor
  staging: rtl8192e: Remove unchanged variable chan_forced
  staging: rtl8192e: Remove set to true while true of bfirst_after_down
  staging: rtl8192e: Remove second initialization of bActuallySet
  staging: rtl8192e: Remove unused macro RT_SET_PS_LEVEL
  staging: rtl8192e: Remove unused function rtl92e_disable_nic
  staging: rtl8192e: Remove unchanged variable RegRfPsLevel
  staging: rtl8172: Add blank lines after declarations
  staging: rtl8192e: Remove unused variable RF_Type
  staging: rtl8192e: Remove one of two checks for hardware RTL8192SE
  staging: rtl8192e: Remove unused function _rtl92e_dm_init_wa_broadcom_iot
  staging: rtl8192e: Remove macro IS_HARDWARE_TYPE_8192SE
  staging: greybus: drop loopback test files
  staging: rtl8192e: Add blank lines after declarations
  staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPDecryptErrors>
  staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPReplays>
  staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPFormatErrors>
  staging: rtl8192e: fix alignment to match open parenthesis
  ...

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.4-rc1.

  Nothing major, just lots of tiny, constant, forward development. This
  includes:

   - obligatory n_gsm updates and feature additions

   - 8250_em driver updates

   - sh-sci driver updates

   - dts cleanups and updates

   - general cleanups and improvements by Ilpo and Jiri

   - other small serial driver core fixes and driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
  n_gsm: Use array_index_nospec() with index that comes from userspace
  tty: vt: drop checks for undefined VT_SINGLE_DRIVER
  tty: vt: distribute EXPORT_SYMBOL()
  tty: vt: simplify some cases in tioclinux()
  tty: vt: reformat tioclinux()
  tty: serial: sh-sci: Fix end of transmission on SCI
  tty: serial: sh-sci: Add support for tx end interrupt handling
  tty: serial: sh-sci: Fix TE setting on SCI IP
  tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
  tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
  serial: max310x: fix IO data corruption in batched operations
  serial: core: Disable uart_start() on uart_remove_one_port()
  serial: 8250: Reinit port->pm on port specific driver unbind
  serial: 8250: Add missing wakeup event reporting
  tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
  tty: serial: fsl_lpuart: adjust buffer length to the intended size
  serial: fix TIOCSRS485 locking
  serial: make SiFive serial drivers depend on ARCH_ symbols
  tty: synclink_gt: don't allocate and pass dummy flags
  tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.4-rc1.

  The "biggest" thing in here is the removal of two obsolete drivers,
  u132-hcd and ftdi-elan, making this a net-removal of code overall.

  Other than the driver removals, included in here are:

   - Thunderbolt updates for new hardware and features

   - xhci driver updates and fixes

   - dwc3 driver updates and fixes

   - gadget core and driver updates and features added

   - mtu3 driver updates

   - dwc2 driver fixes and updates

   - usb-serial driver updates

   - typec driver updates and fixes

   - platform remove callback changes

   - dts updates and conversions

   - other small changes

  All have been in linux-next for a while with no reported problems"

* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
  usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
  usb: dwc3: gadget: Execute gadget stop after halting the controller
  media: radio-shark: Add endpoint checks
  USB: sisusbvga: Add endpoint checks
  USB: core: Add routines for endpoint checks in old drivers
  usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
  dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
  usb: dwc3: core: add support for disabling High-speed park mode
  dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
  usb: mtu3: add optional clock xhci_ck and frmcnt_ck
  dt-bindings: usb: mtu3: add two optional clocks
  usb: mtu3: expose role-switch control to userspace
  usb: mtu3: unlock @mtu->lock just before giving back request
  usb: mtu3: fix kernel panic at qmu transfer done irq handler
  usb: mtu3: use boolean return value
  usb: mtu3: give back request when rx error happens
  usb: chipidea: fix missing goto in `ci_hdrc_probe`
  usb: gadget: udc: core: Prevent redundant calls to pullup
  usb: gadget: udc: core: Invoke usb_gadget_connect only when started
  usb: typec: ucsi: don't print PPM init deferred errors
  ...

Pull firewire updates from Takashi Sakamoto:
 "The pull request includes a few changes, Its main purpose is to
  prepare for my future work by taking over maintainership from Stefan
  Richter. I have plans to work on several items; e.g. packet processing
  in workqueue context instead of tasklet.

  As you may be aware, the IEEE 1394 technology is outdated. However, we
  still have users. It is better to ensure a smooth transition for the
  users to shift to other categories of devices"

* tag 'firewire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: init_ohci1394_dma: use correct function names in comments
  MAINTAINERS: replace maintainer of FireWire subsystem

Pull HID updates from Jiri Kosina:

 - import a bunch of HID selftests from out-of-tree hid-tools project
   (Benjamin Tissoires)

 - drastically reducing Bluetooth disconnects on hid-nintendo driven
   devices (Daniel J. Ogorchock)

 - lazy initialization of battery interfaces in wacom driver (Jason
   Gerecke)

 - generic support for all Kye tablets (David Yang)

 - proper rumble queue overrun handling in hid-nintendo (Daniel J.
   Ogorchock)

 - support for ADC measurement in logitech-hidpp driver (Bastien Nocera)

 - reset GPIO support in i2c-hid (Hans de Goede)

 - improved handling of generic "Digitizer" usage (Jason Gerecke)

 - support for KEY_CAMERA_FOCUS (Feng Qi)

 - quirks for Apple Geyser 3 and Apple Geyser 4 (Alex Henrie)

 - assorted functional fixes and device ID additions

* tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
  HID: amd_sfh: Fix max supported HID devices
  HID: wacom: generic: Set battery quirk only when we see battery data
  HID: wacom: Lazy-init batteries
  HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RA
  HID: asus: explicitly include linux/leds.h
  HID: lg-g15: explicitly include linux/leds.h
  HID: steelseries: explicitly include linux/leds.h
  HID: apple: Set the tilde quirk flag on the Geyser 3
  HID: apple: explicitly include linux/leds.h
  HID: mcp2221: fix get and get_direction for gpio
  HID: mcp2221: fix report layout for gpio get
  HID: wacom: Set a default resolution for older tablets
  HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of
  HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
  HID: i2c-hid-of: Consistenly use dev local variable in probe()
  HID: kye: Fix rdesc for kye tablets
  HID: amd_sfh: Support for additional light sensor
  HID: amd_sfh: Handle "no sensors" enabled for SFH1.1
  HID: amd_sfh: Increase sensor command timeout for SFH1.1
  HID: amd_sfh: Correct the stop all command
  ...

Pull fbdev updates from Helge Deller:
 "Nothing really exiting in here.

  The majority of lines changed is due to Uwe's preparation patches to
  change the return value of the .remove() callback to void.

  Summary:

   - vt_buffer.h: Fix build on alpha (Randy Dunlap)

   - mmp: Clock handling fix (Christophe JAILLET)

   - 68328fb, ps3fb, vfb: Init .owner field of struct fb_ops (Thomas
     Zimmermann)

   - fbdev: cg14: Convert to platform remove callback returning void

   - Preparation patches to convert drivers to return void in .remove()
     callback (Uwe Kleine-König)

   - Drop Paul Mackerras as rage128 maintainer"

* tag 'fbdev-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (51 commits)
  MAINTAINERS: Remove rage128 framebuffer driver maintainer
  fbdev: vfb: Init owner field of struct fb_ops
  fbdev: ps3fb: Init owner field of struct fb_ops
  fbdev: 68328fb: Init owner field of struct fb_ops
  fbdev: mmp: Fix deferred clk handling in mmphw_probe()
  linux/vt_buffer.h: allow either builtin or modular for macros
  fbdev: xilinxfb: Convert to platform remove callback returning void
  fbdev: wmt_ge_rops: Convert to platform remove callback returning void
  fbdev: wm8505fb: Convert to platform remove callback returning void
  fbdev: vt8500lcdfb: Convert to platform remove callback returning void
  fbdev: via: Convert to platform remove callback returning void
  fbdev: vga16fb: Convert to platform remove callback returning void
  fbdev: vfb: Convert to platform remove callback returning void
  fbdev: vesafb: Convert to platform remove callback returning void
  fbdev: uvesafb: Convert to platform remove callback returning void
  fbdev: tcx: Convert to platform remove callback returning void
  fbdev: sm501fb: Convert to platform remove callback returning void
  fbdev: simplefb: Convert to platform remove callback returning void
  fbdev: sh_mobile_lcdcfb: Convert to platform remove callback returning void
  fbdev: sh7760fb: Convert to platform remove callback returning void
  ...

Pull i2c updates from Wolfram Sang:
 "Mostly fixes for DTs or DT handling this time. And a few driver
  bugfixes"

* tag 'i2c-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
  i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
  i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
  i2c: omap: Improve error reporting for problems during .remove()
  i2c: cadence: Add reset controller support
  dt-bindings: i2c: cadence: Document `resets` property
  i2c: mediatek: add support for MT7981 SoC
  dt-bindings: i2c: i2c-mt65xx: add MediaTek MT7981 SoC
  dt-bindings: i2c: Drop unneeded quotes
  i2c: brcmstb: use devm_platform_ioremap_resource_byname()
  i2c: cadence: Detect maximum transfer size
  i2c: cadence: Allow to specify the FIFO depth
  dt-bindings: i2c: cadence: Document `fifo-depth` property
  i2c: xiic: Use devm_platform_get_and_ioremap_resource()
  i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c property
  i2c: mpc: Use of_property_read_u32 instead of of_get_property
  dt-bindings: i2c: mpc: Mark "fsl,timeout" as deprecated
  i2c: xiic: hide OF related data for COMPILE_TEST
  i2c: synquacer: mark OF related data as maybe unused
  dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
  i2c: imx: Simplify using devm_clk_get_enabled()
  ...

Pull IPMI updates from Corey Minyard:
 "Minor bug fixes for the IPMI driver

  There was a bug in the SSIF driver where in certain conditions it
  could stop working.

  Outside of that: spelling fixes, removing some dead code, re-adding a
  missing statistic increment, and removal of register_sysctl_table()"

* tag 'for-linus-6.4-1' of https://github.com/cminyard/linux-ipmi:
  ipmi:ssif: Drop if blocks with always false condition
  ipmi: fix SSIF not responding under certain cond.
  ipmi:ssif: Add send_retries increment
  char:ipmi:Fix spelling mistake "asychronously" -> "asynchronously"
  ipmi: simplify sysctl registration
  ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it

Pull spi updates from Mark Brown:
 "A fairly standard release for SPI with the exception of a change to
  the API for specifying chip selects done in preparation for supporting
  devices with more than one chip select, this required some mechanical
  changes throughout the tree which have been cooking in -next happily
  for a while.

  There's also a new API to allow us to support TPM chips on half duplex
  controllers.

  Summary:

   - Refactoring in preparation for supporting multiple chip selects for
     a single device, needed by some flash devices, which required a
     change in the SPI device API visible throughout the tree

   - Support for hardware assisted interaction with SPI TPMs on half
     duplex controllers, implemented on nVidia Tedra210 QuadSPI

   - Optimisation for large transfers on fsl-cpm devices

   - Cleanups around device property use which fix some sisues with
     fwnode

   - Use of both void remove() and devm_platform_.*ioremap_resource()

   - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
     Intel MetorLake-S and StarFive J7110 QuadSPI"

* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
  spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
  spi: tegra210-quad: Enable TPM wait polling
  spi: Add TPM HW flow flag
  spi: bcm63xx: remove PM_SLEEP based conditional compilation
  spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
  spi: spi-cadence: Add support for Slave mode
  spi: spi-cadence: Switch to spi_controller structure
  spi: cadence-quadspi: fix suspend-resume implementations
  spi: dw: Add support for AMD Pensando Elba SoC
  spi: dw: Add AMD Pensando Elba SoC SPI Controller
  spi: cadence-quadspi: Disable the SPI before reconfiguring
  spi: cadence-quadspi: Update the read timeout based on the length
  spi: spi-loopback-test: Add module param for iteration length
  spi: add support for Amlogic A1 SPI Flash Controller
  dt-bindings: spi: add Amlogic A1 SPI controller
  spi: fsl-spi: No need to check transfer length versus word size
  spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
  spi: fsl-cpm: Use 16 bit mode for large transfers with even size
  spi: fsl-spi: Re-organise transfer bits_per_word adaptation
  spi: fsl-spi: Fix CPM/QE mode Litte Endian
  ...

Pull sound updates from Takashi Iwai:
 "At this time, it's an interesting mixture of changes for both old and
  new stuff. Majority of changes are about ASoC (lots of systematic
  changes for converting remove callbacks to void, and cleanups), while
  we got the fixes and the enhancements of very old PCI cards, too.

  Here are some highlights:

  ALSA/ASoC Core:
   - Continued effort of more ASoC core cleanups
   - Minor improvements for XRUN handling in indirect PCM helpers
   - Code refactoring of PCM core code

  ASoC:
   - Continued feature and simplification work on SOF, including
     addition of a no-DSP mode for bringup, HDA MLink and extensions to
     the IPC4 protocol
   - Hibernation support for CS35L45
   - More DT binding conversions
   - Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
     nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
     R-Car Gen4, Rockchip RK3588 and TI TAS5733

  ALSA:
   - Lots of works for legacy emu10k1 and ymfpci PCI drivers
   - PCM kselftest fixes and enhancements"

* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
  ALSA: emu10k1: use high-level I/O in set_filterQ()
  ALSA: emu10k1: use high-level I/O functions also during init
  ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
  ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
  ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
  ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
  ALSA: emu10k1: fixup DSP defines
  ALSA: emu10k1: pull in some register definitions from kX-project
  ALSA: emu10k1: remove some bogus defines
  ALSA: emu10k1: eliminate some unused defines
  ALSA: emu10k1: fix lineup of EMU_HANA_* defines
  ALSA: emu10k1: comment updates
  ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
  ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
  ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
  ALSA: emu10k1: minor optimizations
  ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
  ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
  ALSA: emu10k1: remove apparently pointless FPGA reads
  ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
  ...

Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
     iterators

  PCIe native device hotplug:

   - Fix AB-BA deadlock between reset_lock and device_lock

  Power management:

   - Wait longer for devices to become ready after resume (as we do for
     reset) to accommodate Intel Titan Ridge xHCI devices

   - Extend D3hot delay for NVIDIA HDA controllers to avoid
     unrecoverable devices after a bus reset

  Error handling:

   - Clear PCIe Device Status after EDR since generic error recovery now
     only clears it when AER is native

  ASPM:

   - Work around Chromebook firmware defect that clobbers Capability
     list (including ASPM L1 PM Substates Cap) when returning from
     D3cold to D0

  Freescale i.MX6 PCIe controller driver:

   - Install imprecise external abort handler only when DT indicates
     PCIe support

  Freescale Layerscape PCIe controller driver:

   - Add ls1028a endpoint mode support

  Qualcomm PCIe controller driver:

   - Add SM8550 DT binding and driver support

   - Add SDX55 DT binding and driver support

   - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

   - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

   - Add DT "mhi" register region for supported SoCs

   - Expose link transition counts via debugfs to help debug low power
     issues

   - Support system suspend and resume; reduce interconnect bandwidth
     and turn off clock and PHY if there are no active devices

   - Enable async probe by default to reduce boot time

  Miscellaneous:

   - Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
  PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
  PCI: mobiveil: Sort Kconfig entries by vendor
  PCI: dwc: Sort Kconfig entries by vendor
  PCI: Sort controller Kconfig entries by vendor
  PCI: Use consistent controller Kconfig menu entry language
  PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
  PCI: hv: Add 'Microsoft' to Kconfig prompt
  PCI: meson: Add 'Amlogic' to Kconfig prompt
  PCI: Use of_property_present() for testing DT property presence
  PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  PCI: qcom: Add SM8550 PCIe support
  dt-bindings: PCI: qcom: Add SM8550 compatible
  PCI: qcom: Add support for SDX55 SoC
  dt-bindings: PCI: qcom-ep: Fix the unit address used in example
  dt-bindings: PCI: qcom: Add SDX55 SoC
  dt-bindings: PCI: qcom: Update maintainers entry
  PCI: qcom: Enable async probe by default
  PCI: qcom: Add support for system suspend and resume
  PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
  ...

Pull more devicetree updates from Rob Herring:

 - First part of DT header detangling dropping cpu.h from of_device.h
   and replacing some includes with forward declarations. A handful of
   drivers needed some adjustment to their includes as a result.

 - Refactor of_device.h to be used by bus drivers rather than various
   device drivers. This moves non-bus related functions out of
   of_device.h. The end goal is for of_platform.h and of_device.h to
   stop including each other.

 - Refactor open coded parsing of "ranges" in some bus drivers to use DT
   address parsing functions

 - Add some new address parsing functions of_property_read_reg(),
   of_range_count(), and of_range_to_resource() in preparation to
   convert more open coded parsing of DT addresses to use them.

 - Treewide clean-ups to use of_property_read_bool() and
   of_property_present() as appropriate. The ones here are the ones that
   didn't get picked up elsewhere.

* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
  bus: tegra-gmi: Replace of_platform.h with explicit includes
  hte: Use of_property_present() for testing DT property presence
  w1: w1-gpio: Use of_property_read_bool() for boolean properties
  virt: fsl: Use of_property_present() for testing DT property presence
  soc: fsl: Use of_property_present() for testing DT property presence
  sbus: display7seg: Use of_property_read_bool() for boolean properties
  sparc: Use of_property_read_bool() for boolean properties
  sparc: Use of_property_present() for testing DT property presence
  bus: mvebu-mbus: Remove open coded "ranges" parsing
  of/address: Add of_property_read_reg() helper
  of/address: Add of_range_count() helper
  of/address: Add support for 3 address cell bus
  of/address: Add of_range_to_resource() helper
  of: unittest: Add bus address range parsing tests
  of: Drop cpu.h include from of_device.h
  OPP: Adjust includes to remove of_device.h
  irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
  cpuidle: Adjust includes to remove of_device.h
  cpufreq: sun50i: Add explicit include for cpu.h
  cpufreq: Adjust includes to remove of_device.h
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
     TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
     FPGA bindings to DT schema format

   - Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt
     controller

   - Add MediaTek MT8365 UART and SYSIRQ bindings

   - Add Arm Cortex-A78C and X1C core compatibles

   - Add vendor prefix for Novatek

   - Remove bindings for stih415, sti416, stid127 platforms

   - Drop uneeded quotes in schema files. This is preparation for
     yamllint checking quoting for us.

   - Add missing (unevaluated|additional)Properties constraints on child
     node schemas

   - Clean-up schema comments formatting

   - Fix I2C and SPI node bus names in schema examples

   - Clean-up some display compatibles schema syntax

   - Fix incorrect references to lvds.yaml

   - Gather all cache controller bindings in a common directory

  DT core:

   - Convert unittest to new void .remove platform device hook

   - kerneldoc fixes for DT address of_pci_range_to_resource/
     of_address_to_resource functions"

* tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
  dt-bindings: rng: Drop unneeded quotes
  dt-bindings: arm/soc: mediatek: Drop unneeded quotes
  dt-bindings: soc: qcom: Drop unneeded quotes
  dt-bindings: i2c: samsung: Fix 'deprecated' value
  dt-bindings: display: Fix lvds.yaml references
  dt-bindings: display: simplify compatibles syntax
  dt-bindings: display: mediatek: simplify compatibles syntax
  dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references
  dt-bindings: timer: Drop unneeded quotes
  dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc
  dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
  dt-bindings: reset: remove stih415/stih416 reset
  dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127
  dt-bindings: irqchip: sti: remove stih415/stih416 and stid127
  dt-bindings: iommu: Convert QCOM IOMMU to YAML
  dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property
  dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
  of: address: Reshuffle to remove forward declarations
  of: address: Fix documented return value of of_pci_range_to_resource()
  of: address: Document return value of of_address_to_resource()
  ...

Pull iommufd updates from Jason Gunthorpe:
 "Two series:

   - Reorganize how the hardware page table objects are managed,
     particularly their destruction flow. Increase the selftest test
     coverage in this area by creating a more complete mock iommu
     driver.

     This is preparation to add a replace operation for HWPT binding,
     which is done but waiting for the VFIO parts to complete so there
     is a user.

   - Split the iommufd support for "access" to make it two step -
     allocate an access then link it to an IOAS. Update VFIO and have
     VFIO always create an access even for the VFIO mdevs that never do
     DMA.

     This is also preperation for the replace VFIO series that will
     allow replace to work on access types as well.

  Three minor fixes:

   - Sykzaller found the selftest code didn't check for overflow when
     processing user VAs

   - smatch noted a .data item should have been static

   - Add a selftest that reproduces a syzkaller bug for batch carry
     already fixed in rc"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits)
  iommufd/selftest: Cover domain unmap with huge pages and access
  iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static
  vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
  vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
  vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
  vfio-iommufd: No need to record iommufd_ctx in vfio_device
  iommufd: Create access in vfio_iommufd_emulated_bind()
  iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
  iommufd/selftest: Catch overflow of uptr and length
  iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument
  iommufd/selftest: Make selftest create a more complete mock device
  iommufd/selftest: Rename the remaining mock device_id's to stdev_id
  iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain
  iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas
  iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id'
  iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain()
  iommufd: Move iommufd_device to iommufd_private.h
  iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy()
  iommufd: Consistently manage hwpt_item
  iommufd: Add iommufd_lock_obj() around the auto-domains hwpts
  ...

Pull drm fixes from Dave Airlie:
 "A bit out of routine fixes pull for rc1.

  There's a build breakage on some platforms due to ttm, this has that
  fix + qaic uapi removal + minor panel fixes.

  ttm:
   - Fix TTM build on archs where PMD_SHIFT is not constant

  qaic:
   - Revert uAPI from accel/qaic

  panel:
   - Improve error handling in nt35950
   - Fix double unregister in otm8009a when removing the driver"

* tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm:
  drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
  drm/panel: otm8009a: Set backlight parent to panel device
  drm/panel: novatek-nt35950: Improve error handling
  drm/ttm: revert "Reduce the number of used allocation orders for TTM pages"
  Revert "accel/qaic: Add mhi_qaic_cntl"

After upgrading build guests to v6.3, rpm started segfaulting for
specific packages, which was bisected to commit 0503ea8f ("mm/mmap:
remove __vma_adjust()"). rpm is doing many mremap() operations with file
mappings of its db. The problem is that in vma_merge() case 3 (we merge
with the next vma, expanding it downwards) vm_pgoff is not adjusted as
it should when vm_start changes. As a result the rpm process most likely
sees data from the wrong offset of the file. Fix the vm_pgoff
calculation.

For case 8 this is a non-functional change as the resulting vm_pgoff is
the same.
Reported-and-bisected-by: Jiri Slaby <jirislaby@kernel.org>
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1210903
Fixes: 0503ea8f ("mm/mmap: remove __vma_adjust()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-misc-next-fixes-2023-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next-fixes for v6.4-rc1:
- Revert uAPI from accel/qaic.
- Fix TTM build on archs where PMD_SHIFT is not constant.
- Improve error handling in nt35950.
- Fix double unregister in otm8009a when removing the driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45757de9-75d8-5b41-f1f9-562a7c4675b9@linux.intel.com

Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
  mpi3mr, hisi_sas, arcmsr).

  The major core change is the constification of the host templates
  (which touches everything) along with other minor fixups and clean
  ups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
  scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()
  scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately
  scsi: cxlflash: s/semahpore/semaphore/
  scsi: lpfc: Silence an incorrect device output
  scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation
  scsi: scsi_debug: Fix missing error code in scsi_debug_init()
  scsi: hisi_sas: Work around build failure in suspend function
  scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
  scsi: mpt3sas: Fix an issue when driver is being removed
  scsi: mpt3sas: Remove HBA BIOS version in the kernel log
  scsi: target: core: Fix invalid memory access
  scsi: scsi_debug: Drop sdebug_queue
  scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts
  scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store()
  scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued()
  scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll()
  scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd
  scsi: scsi_debug: Use scsi_block_requests() to block queues
  scsi: scsi_debug: Protect block_unblock_all_queues() with mutex
  scsi: scsi_debug: Change shost list lock to a mutex
  ...

- improved handling of battery quirk (Jason Gerecke)
- lazy initialization of battery interfaces (Jason Gerecke)

- import of bunch of HID selftests from out-of-tree hid-tools project
  (Benjamin Tissoires)

- drastically reducing Bluetooth disconnects on hid-nintendo
  driven devices (Daniel J. Ogorchock)
- proper rumble queue overrun handling (Daniel J. Ogorchock)

- generic code improvements for mcp2221 driver (Louis Morhet)

- support for ADC measurement (Bastien Nocera)
- support for Logitech G935 (Bastien Nocera)

- explicit include fixes (Thomas Weißschuh)

- generic support for all Kye tablets (David Yang)

- reset GPIO support (Hans de Goede)

- improve handling of generic "Digitizer" usage (Jason Gerecke)
- support for KEY_CAMERA_FOCUS (Feng Qi)