- 16 Feb, 2018 8 commits
-
-
Kirill A. Shutemov authored
This patch converts the of CONFIG_X86_5LEVEL check to runtime checks for p4d folding. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214182542.69302-9-kirill.shutemov@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Kirill A. Shutemov authored
Change page table helpers to fold p4d at runtime. The logic is the same as in <asm-generic/pgtable-nop4d.h>. Signed-off-by:
-
Kirill A. Shutemov authored
Early boot code should be able to initialize page tables for both 4- and 5-level paging modes. Signed-off-by:
-
Kirill A. Shutemov authored
vmemmap area has different placement depending on paging mode. Let's adjust it during early boot accodring to machine capability. Signed-off-by:
-
Kirill A. Shutemov authored
vmalloc area has different placement and size depending on paging mode. Let's adjust it during early boot accodring to machine capability. Signed-off-by:
-
Kirill A. Shutemov authored
For 4- and 5-level paging we have different 'page_offset_base'. Let's initialize it at boot-time accordingly to machine capability. We also have to split __PAGE_OFFSET_BASE into two constants -- for 4- and 5-level paging. Signed-off-by:
-
Kirill A. Shutemov authored
Switching between paging modes requires the folding of the p4d page table level when we only have 4 paging levels, which means we need to adjust 'pgdir_shift' and 'ptrs_per_p4d' during early boot according to paging mode. Signed-off-by:
-
Kirill A. Shutemov authored
'pgtable_l5_enabled' indicates which paging mode we are using. We need to initialize it at boot-time according to machine capability. Signed-off-by:
-
- 14 Feb, 2018 8 commits
-
-
Kirill A. Shutemov authored
For boot-time switching between paging modes, we need to be able to adjust virtual mask shifts. The change doesn't affect the kernel image size much: text data bss dec hex filename 8628892 4734340 1368064 14731296 e0c820 vmlinux.before 8628966 4734340 1368064 14731370 e0c86a vmlinux.after Signed-off-by:
-
Kirill A. Shutemov authored
For boot-time switching between paging modes, we need to be able to adjust size of physical address space at runtime. As part of making physical address space size variable, we have to make X86_5LEVEL dependent on SPARSEMEM_VMEMMAP. !SPARSEMEM_VMEMMAP configuration doesn't build with variable MAX_PHYSMEM_BITS. For !SPARSEMEM_VMEMMAP SECTIONS_WIDTH depends on MAX_PHYSMEM_BITS: SECTIONS_WIDTH SECTIONS_SHIFT MAX_PHYSMEM_BITS And SECTIONS_WIDTH is used on pre-processor stage, it doesn't work if it's dyncamic. See include/linux/page-flags-layout.h. Effect on kernel image size: text data bss dec hex filename 8628393 4734340 1368064 14730797 e0c62d vmlinux.before 8628892 4734340 1368064 14731296 e0c820 vmlinux.after Signed-off-by: -
Kirill A. Shutemov authored
For boot-time switching between 4- and 5-level paging we need to be able to fold p4d page table level at runtime. It requires variable PGDIR_SHIFT and PTRS_PER_P4D. The change doesn't affect the kernel image size much: text data bss dec hex filename 8628091 4734304 1368064 14730459 e0c4db vmlinux.before 8628393 4734340 1368064 14730797 e0c62d vmlinux.after Signed-off-by:
-
Kirill A. Shutemov authored
LDT_BASE_ADDR has different value in 4- and 5-level paging configurations. We need to make it dynamic in preparation for boot-time switching between paging modes. Signed-off-by:
-
Kirill A. Shutemov authored
The new flag would indicate what paging mode we are in. Signed-off-by:
-
Kirill A. Shutemov authored
We need to be able to adjust virtual memory layout at runtime to be able to switch between 4- and 5-level paging at boot-time. KASLR already has movable __VMALLOC_BASE, __VMEMMAP_BASE and __PAGE_OFFSET. Let's re-use it. Signed-off-by:
-
Kirill A. Shutemov authored
With boot-time switching between paging mode we will have variable MAX_PHYSMEM_BITS. Let's use the maximum variable possible for CONFIG_X86_5LEVEL=y configuration to define zsmalloc data structures. The patch introduces MAX_POSSIBLE_PHYSMEM_BITS to cover such case. It also suits well to handle PAE special case. Signed-off-by:
Nitin Gupta <ngupta@vflare.org> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214111656.88514-3-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
__PHYSICAL_MASK_SHIFT is used to define the mask that helps to extract physical address from a page table entry. Although real physical address space available may differ between machines, it's safe to use 52 as __PHYSICAL_MASK_SHIFT. Unused bits above log2(MAXPHYADDR) up to bit 51 are reserved and must be 0. Signed-off-by:
-
- 13 Feb, 2018 5 commits
-
-
Andy Lutomirski authored
EFI is complicated enough that being able to view its pagetables is quite helpful. Rather than requiring users to fish it out of dmesg on an appropriately configured kernel, let users view it in debugfs as well. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/ba158a93f3250e6fca752cff2cfb1fcdd9f2b50c.1517414050.git.luto@kernel.org [ Fixed trivial whitespace damage and fixed missing export. ] Signed-off-by:
-
Kirill A. Shutemov authored
sme_pgtable_calc() is unnecessary complex. It can be re-written in a more stream-lined way. As a side effect, we would get the code ready to boot-time switching between paging modes. Tested-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Kirill A. Shutemov authored
sme_populate_pgd() and sme_populate_pgd_large() operate on the identity mapping, which means they want virtual addresses to be equal to physical one, without PAGE_OFFSET shift. We also need to avoid paravirtualization call there. Getting this done is tricky. We cannot use usual page table helpers. It forces us to open-code a lot of things. It makes code ugly and hard to modify. We can get it work with the page table helpers, but it requires few preprocessor tricks. - Define __pa() and __va() to be compatible with identity mapping. - Undef CONFIG_PARAVIRT and CONFIG_PARAVIRT_SPINLOCKS before including any file. This way we can avoid paravirtualization calls. Now we can user normal page table helpers just fine. Tested-by: -
Kirill A. Shutemov authored
There are bunch of functions in mem_encrypt.c that operate on the identity mapping, which means they want virtual addresses to be equal to physical one, without PAGE_OFFSET shift. We also need to avoid paravirtualizaion call there. Getting this done is tricky. We cannot use usual page table helpers. It forces us to open-code a lot of things. It makes code ugly and hard to modify. We can get it work with the page table helpers, but it requires few preprocessor tricks. These tricks may have side effects for the rest of the file. Let's isolate such functions into own translation unit. Tested-by:
-
Nadav Amit authored
The TLB invalidation info is allocated on the stack, which might cause it to be unaligned. Since this information may be transferred to different cores for TLB shootdown, this may cause an additional cache line to become shared. While the overhead is likely to be small, the fix is simple. We do not use __cacheline_aligned() since it also defines the section, which is inappropriate for stack variables. Signed-off-by:
Nadav Amit <namit@vmware.com> Acked-by:
-
- 12 Feb, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - oversize stack frames on mn10300 in sha3-generic - warning on old compilers in sha3-generic - API error in sun4i_ss_prng - potential dead-lock in sun4i_ss_prng - null-pointer dereference in sha512-mb - endless loop when DECO acquire fails in caam - kernel oops when hashing empty message in talitos" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate crypto: caam - fix endless loop when DECO acquire fails crypto: sha3-generic - Use __optimize to support old compilers compiler-gcc.h: __nostackprotector needs gcc-4.4 and up compiler-gcc.h: Introduce __optimize function attribute crypto: sha3-generic - deal with oversize stack frames crypto: talitos - fix Kernel Oops on hashing an empty file crypto: sha512-mb - initialize pending lengths correctly
-
- 11 Feb, 2018 9 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations -
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Mathieu Malaterre authored
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:David Daney <ddaney@caviumnetworks.com> Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Acked-by:
-
- 10 Feb, 2018 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly -
git://github.com/dvhart/linux-pdx86Linus Torvalds authored
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ... -
Alexey Kardashevskiy authored
59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
-
Al Viro authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type
-
