- 08 Mar, 2013 18 commits
-
-
Johan Hedberg authored
This patch introduces functions to process the HCI request state when receiving HCI Command Status or Command Complete events. Some HCI commands, like Inquiry do not result in a Command complete event so special handling is needed for them. Inquiry is a particularly important one since it is the only forseeable "non-cmd_complete" command that will make good use of the request functionality, and its completion is either indicated by an Inquiry Complete event of a successful Command Complete for HCI_Inquiry_Cancel. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
To have a consistent content for hdev->cmd_q all entries need to follow the semantics of asynchronous HCI requests. This means that even single commands need to be dressed as requests by having a request start indicator. This patch adds these indicators to the two places needing it (hci_send_cmd and hci_sock_sendmsg). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
This function is analogous to hci_send_cmd() but instead of directly queuing the command to hdev->cmd_q it adds it to the local queue of the asynchronous HCI request being build (inside struct hci_request). This is the main function used for building asynchronous requests and there should be one or more calls to it between calls to hci_req_init and hci_req_run. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
This patch moves out the skb creation from hci_send_cmd() into its own prepare_cmd() function. This is essential so the same prepare_cmd() function can be easily reused for skb creation for asynchronous HCI requests. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
This patch adds the initial definitions and functions for asynchronous HCI requests. Asynchronous requests are essentially a group of HCI commands together with an optional completion callback. The request is tracked through the already existing command queue by having the necessary context information as part of the control buffer of each skb. The only information needed in the skb control buffer is a flag for indicating that the skb is the start of a request as well as the optional complete callback that should be used when the request is complete (this will be found in the last skb of the request). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
Having conditional command sending during a request has always been problematic and caused hacks like the hdev->init_last_cmd variable. This patch removes these conditionals and instead splits the init sequence into three stages, each with its own __hci_req_sync() call. This also paves the way to the upcoming asynchronous request support swhich will also benefit by having a simpler implementation if it doesn't need to cater for requests that change on the fly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
If a request callback doesn't send any commands __hci_req_sync() should fail imediately instead of waiting for the inevitable timeout to occur. This is particularly important once we start creating requests with conditional command sending which can potentially result in no commands being sent at all. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Johan Hedberg authored
We'll be introducing an async version of hci_request. To make things clear it makes sense to rename the existing API to have a _sync suffix. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Dean Jenkins authored
rfcomm_session_close() sets the RFCOMM session state to BT_CLOSED. However, in multiple places immediately before the function is called, the RFCOMM session is set to BT_CLOSED. Therefore, remove these unnecessary state settings. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Dean Jenkins authored
In rfcomm_session_del() remove the redundant call to rfcomm_send_disc() because it is not possible for the session to be in BT_CONNECTED state during deletion of the session. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Dean Jenkins authored
Previous commits have improved the handling of the RFCOMM session timer and the RFCOMM session pointers such that freed RFCOMM session structures should no longer be erroneously accessed. The RFCOMM session refcnt now has no purpose and will be deleted by this commit. Note that the RFCOMM session is now deleted as soon as the RFCOMM control channel link is no longer required. This makes the lifetime of the RFCOMM session deterministic and absolute. Previously with the refcnt, there was uncertainty about when the session structure would be deleted because the relative refcnt prevented the session structure from being deleted at will. It was noted that the refcnt could malfunction under very heavy real-time processor loading in embedded SMP environments. This could cause premature RFCOMM session deletion or double session deletion that could result in kernel crashes. Removal of the refcnt prevents this issue. There are 4 connection / disconnection RFCOMM session scenarios: host initiated control link ---> host disconnected control link host initiated ctrl link ---> remote device disconnected ctrl link remote device initiated ctrl link ---> host disconnected ctrl link remote device initiated ctrl link ---> remote device disc'ed ctrl link The control channel connection procedures are independent of the disconnection procedures. Strangely, the RFCOMM session refcnt was applying special treatment so erroneously combining connection and disconnection events. This commit fixes this issue by removing some session code that used the "initiator" member of the session structure that was intended for use with the data channels. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Dean Jenkins authored
Unfortunately, the design retains local copies of the s RFCOMM session pointer in various code blocks and this invites the erroneous access to a freed RFCOMM session structure. Therefore, return the RFCOMM session pointer back up the call stack to avoid accessing a freed RFCOMM session structure. When the RFCOMM session is deleted, NULL is passed up the call stack. If active DLCs exist when the rfcomm session is terminating, avoid a memory leak of rfcomm_dlc structures by ensuring that rfcomm_session_close() is used instead of rfcomm_session_del(). Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Dean Jenkins authored
A race condition exists between near simultaneous asynchronous DLC data channel disconnection requests from the host and remote device. This causes the socket layer to request a socket shutdown at the same time the rfcomm core is processing the disconnect request from the remote device. The socket layer retains a copy of a struct rfcomm_dlc d pointer. The d pointer refers to a copy of a struct rfcomm_session. When the socket layer thread performs a socket shutdown, the thread may wait on a rfcomm lock in rfcomm_dlc_close(). This means that whilst the thread waits, the rfcomm_session and/or rfcomm_dlc structures pointed to by d maybe freed due to rfcomm core handling. Consequently, when the rfcomm lock becomes available and the thread runs, a malfunction could occur as a freed rfcomm_session structure and/or a freed rfcomm_dlc structure will be erroneously accessed. Therefore, after the rfcomm lock is acquired, check that the struct rfcomm_session is still valid by searching the rfcomm session list. If the session is valid then validate the d pointer by searching the rfcomm session list of active DLCs for the rfcomm_dlc structure pointed by d. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Dean Jenkins authored
Use del_timer_sync() instead of del_timer() as this ensures that rfcomm_session_timeout() is not running on a different CPU when rfcomm_session_put() is called. This avoids a race condition on SMP systems because potentially rfcomm_session_timeout() could reuse the freed RFCOMM session structure caused by the execution of rfcomm_session_put(). Note that this modification makes the reason for the RFCOMM session refcnt mechanism redundant. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
David Herrmann authored
There is no reason a caller ever wants to check the return type of this call. _Iff_ a user successfully called bt_sock_register(), they're allowed to call bt_sock_unregister(). All other calls in the kernel (device_del, device_unregister, kfree(), ..) that are logically equivalent return void. Lets not make callers think they have to check the return type of this call and instead simply return void. We guarantee that after bt_sock_unregister() is called, the socket type _is_ unregistered. If that is not what the caller wants, they're using the wrong function, anyway. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
David Herrmann authored
After we successfully registered a socket via bt_sock_register() there is no reason to ever check the return code of bt_sock_unregister(). If bt_sock_unregister() fails, it means the socket _is_ already unregistered so we have what we want, don't we? Also, to get bt_sock_unregister() to fail, another part of the kernel has to unregister _our_ socket. This is sooo _wrong_ that it will break way earlier than when we unregister our socket. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Karl Relton authored
After linux 3.2 the hid_destroy_device call in hidp_session cleaning up invokes a hook to the power_supply code which in turn tries to read the battery capacity. This read will trigger a call to hidp_get_raw_report which is bound to fail because the device is being taken away - so rather than wait for the 5 second timeout failure this changes enables it to fail straight away. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Andre Guedes authored
As hci_acl_disconn function basically sends the HCI Disconnect Command and it is used to disconnect ACL, SCO and LE links, renaming it to hci_disconnect is more suitable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
- 06 Mar, 2013 22 commits
-
-
Amitkumar Karwar authored
Currently 'magic-packet' and 'patterns' options in 'iw wowlan' command are supported. Appropriate packet filters for wowlan are configured in firmware based on provided patterns and/or magic-packet option. For examples, wake-on ARP request for 192.168.0.100: iw phy0 wowlan enable patterns ff:ff:ff:ff:ff:ff 20+08:06 46+c0:a8:00:64 wake-on RX packets sent from IP address 192.168.0.88: iw phy0 wowlan enable patterns 34+c0:a8:00:58 wake-on RX packets with TCP destination port 80 iw phy0 wowlan enable patterns 44+50 wake-on MagicPacket: iw phy0 wowlan enable magic-packet wake-on MagicPacket or patterns: iw phy0 wowlan enable magic-packet patterns 12+00:11:22:33:44:55 18+00:50:43:21 wake-on IPv4 multicast packets: iw phy0 wowlan enable patterns 01:00:5e wake-on IPv6 multicast packets: iw phy0 wowlan enable patterns 33:33 disable all wowlan options iw phy0 wowlan disable Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Host sleep wakeup condition is configured using this command. Supports Wake-on: pumb For examples: wake-on any unicast packets: ethtool -s mlan0 wol u wake-on multicast/broadcast packet: ethtool -s mlan0 wol mb wake-on unicast packets and MAC events: ethtool -s mlan0 wol pu wake-on unicast/multicast/broadcast packets and MAC events: ethtool -s mlan0 wol pmbu disable all wake-on options: ethtool -s mlan0 wol d Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
As we are adding a few more macros in this category in next patch, this cleanup work is required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
We allocate SKB buffers of 4K size to make sure that we process RX AMSDU of 4K. So when skb->len is lesser than 4K; we should modify skb->truesize. This resolves an issue where kernel has allocated packets with 2K assumption and starts dropping packets for large size data transfer. This fix is already present for USB; extend it to PCIE. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
drivers/net/wireless/mwifiex/pcie.c:1157:9: warning: 'desc2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/mwifiex/pcie.c:1048:31: note: 'desc2' was declared here drivers/net/wireless/mwifiex/pcie.c:1159:9: warning: 'desc' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/mwifiex/pcie.c:1047:32: note: 'desc' was declared here Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
drivers/net/wireless/mwifiex/pcie.c:204:12: warning: 'mwifiex_pcie_resume' defined but not used [-Wunused-function] drivers/net/wireless/mwifiex/pcie.c:166:12: warning: 'mwifiex_pcie_suspend' defined but not used [-Wunused-function] The suspend/resume handlers ought to be under CONFIG_PM directive. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
move functions up just to avoid static forward declaration for mwifiex_pcie_resume. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
HT-PHY was found only on BCM4331 which is a BCMA-based chipset. This is reallly unlikely we will ever see HT-PHY on SSB thus make the whole code BCMA specific. This will allow us to call various BCMA-specific functions directly (without extra checks). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
When the RX chainmask is set to 0x2 for AR9462, certain values from chain1 have to be programmed for chain0 also. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
This flag is used for indicating channel interference and we currently do nothing with it, so remove it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The function brcmf_proto_hdrpush() increases the header space and fills in the protocol header fields. One field is the data offset which is currently fixed to zero meaning the data follows right after the header. The parameter is added to determine the actual start of data. This will be used for firmware signalling. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
Adding a packet dequeue function that will return packets that pass the provided match function. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
For transmit packets the function brcmf_txcomplete() must be called. This should be done as well when for some reason the transmit fails to assure proper tx post processing. This patch fixes the code paths in brcmf_usb_tx() that forgot to do so. Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
In the bus-specific driver code each call to brcmf_txcomplete() is following by a free of that packet. This patch moves that free to the brcmf_txcomplete() function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The firmware and host can exchange signals which are carried within the data packets. These are TLV based signals that are inserted before the actual data, ie. ethernet frame. This commit adds the new source module for this feature and enables RSSI signals from firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
Added inline functions to set bitfields in an unsigned integer variable. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
In preparation of firmware signalling feature additional headroom is needed to accommodate signalling protocol data between host and firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
In brcmf_cfg80211_sched_scan_start() the request parameter was checked for being non-null. However, it never is so remove the check which gets rid of following smatch warning: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:2904 brcmf_cfg80211_sched_scan_start() warn: variable dereferenced before check 'request' (see line 2897) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-