- 01 May, 2019 1 commit
-
-
Gal Pressman authored
Similarly to dev/netdev/etc printk helpers, add standard printk helpers for the RDMA subsystem. Example output: efa 0000:00:06.0 efa_0: Hello World! efa_0: Hello World! (no parent device set) (NULL ib_device): Hello World! (ibdev is NULL) Cc: Jason Baron <jbaron@akamai.com> Suggested-by:
Jason Gunthorpe <jgg@ziepe.ca> Suggested-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Gal Pressman <galpress@amazon.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 25 Apr, 2019 4 commits
-
-
Matthew Wilcox authored
The word 'idr' is scattered throughout the API, so I haven't changed it, but the 'idr' variable is now an XArray. Signed-off-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Matthew Wilcox authored
Signed-off-by:
-
Jason Gunthorpe authored
Ariel Levkovich says: ==================== The series exposes the ICM address of the receive transport interface (TIR) of Raw Packet and RSS QPs to the user since they are required to properly create and insert steering rules that direct flows to these QPs. ==================== For dependencies this branch is based on mlx5-next from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux * branch 'mlx5_tir_icm': IB/mlx5: Expose TIR ICM address to user space net/mlx5: Introduce new TIR creation core API net/mlx5: Expose TIR ICM address in command outbox Signed-off-by:
-
Ariel Levkovich authored
This patch exposes the TIR ICM address of raw packet and RSS QPs to user space. In order to pass the new field, the patch extends the mlx5 specific QP creation response structure and fills it with the icm address returned by the FW command, if available. Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
- 24 Apr, 2019 20 commits
-
-
Ariel Levkovich authored
Introducing new TIR creation core API which allows caller to receive back from the call the full command outbox. This comes as a preparation for the next patch that will retrieve the TIR ICM address from the command outbox. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Ariel Levkovich authored
Adding the TIR ICM address to the create_tir command outbox through which the device reports the ICM address of the newly created TIR. The TIR address can be used for direct attachment to a steering rule in SW managed steering mode. Signed-off-by:
-
Ariel Levkovich authored
Add SW ICM related fields to the device memory capabilities structure and sw ownership capability in flow table properties. The currently supported SW ICM types are steering and header modify and the changes exposes the device memory capabilities for each of these two types. SW ICM memory can be allocated by SW and then be accessed by RDMA operations for direct management of the HW packet handling tables. Signed-off-by:
-
Jason Gunthorpe authored
Jason Gunthorpe says: ==================== Upon review it turns out there are some long standing problems in BAR mapping area: * BAR pages intended for read-only can be switched to writable via mprotect. * Missing use of rdma_user_mmap_io for the mlx5 clock BAR page. * Disassociate causes SIGBUS when touching the pages. * CPU pages are being mapped through to the process via remap_pfn_range instead of the more appropriate vm_insert_page, causing weird behaviors during disassociation. This series adds the missing VM_* flag manipulation, adds faulting a zero page for disassociation and revises the CPU page mappings to use vm_insert_page. ==================== For dependencies this branch is based on for-rc from git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git * branch 'rdma_mmap': RDMA: Remove rdma_user_mmap_page RDMA/mlx5: Use get_zeroed_page() for clock_info RDMA/ucontext: Fix regression with disassociate RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages RDMA/mlx5: Do not allow the user to write to the clock page Signed-off-by:
-
Jason Gunthorpe authored
Upon further research drivers that want this should simply call the core function vm_insert_page(). The VMA holds a reference on the page and it will be automatically freed when the last reference drops. No need for disassociate to sequence the cleanup. Signed-off-by:
-
Jason Gunthorpe authored
get_zeroed_page() returns a virtual address for the page which is better than allocating a struct page and doing a permanent kmap on it. Cc: stable@vger.kernel.org Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
When this code was consolidated the intention was that the VMA would become backed by anonymous zero pages after the zap_vma_pte - however this very subtly relied on setting the vm_ops = NULL and clearing the VM_SHARED bits to transform the VMA into an anonymous VMA. Since the vm_ops was removed this broke. Now userspace gets a SIGBUS if it touches the vma after disassociation. Instead of converting the VMA to anonymous provide a fault handler that puts a zero'd page into the VMA when user-space touches it after disassociation. Cc: stable@vger.kernel.org Suggested-by:
Andrea Arcangeli <aarcange@redhat.com> Fixes: 5f9794dc ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by:
-
Jason Gunthorpe authored
Since mlx5 supports device disassociate it must use this API for all BAR page mmaps, otherwise the pages can remain mapped after the device is unplugged causing a system crash. Cc: stable@vger.kernel.org Fixes: 5f9794dc ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by:
-
Jason Gunthorpe authored
The intent of this VMA was to be read-only from user space, but the VM_MAYWRITE masking was missed, so mprotect could make it writable. Cc: stable@vger.kernel.org Fixes: 5c99eaec ("IB/mlx5: Mmap the HCA's clock info to user-space") Signed-off-by:
-
John Fleck authored
The bit VCRCErr in the receive header flag is actually a reserved field. Remove bit operations on this field. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
John Fleck <john.fleck@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
These counters are required for error analysis and debug. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The reference count adjustments on reference count completion are open coded throughout. Add a routine to do all reference count adjustments and use. Reviewed-by:
-
Mike Marciniszyn authored
QP creation already records the allowed_ops. Take advantage of that single field to replace multiple qp_type specific tests. Reviewed-by:
-
Mike Marciniszyn authored
The currently include file ordering for rdmavt headers has an ab/ba include issue the precludes using inlines from rdma_vt.h in rdmavt_qp.h. At the heart of the issue is that rdma_vt.h includes rdmavt_qp.h. Fix the ordering issue by adjusting rdma_vt.h to not require rdmavt_qp.h and move qp related inlines to rdmavt_qp.h. Additionally, promote rvt_mmap_info to rdma_vt.h since it is shared by rdmavt_cq.h and rdmavt_qp.h. Reviewed-by:
-
Mike Marciniszyn authored
The opfn.h include file build-ablility depends on the including file having the correct includes. Fix by making opfn.h self sufficient. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Kaike Wan authored
This patch fixes miscellaneous comment errors. Reviewed-by:
-
Josh Collier authored
Some kernels now enable CONFIG_IO_STRICT_DEVMEM which prevents multiple handles to PCI resource0. In order to continue to support expansion ROM updates while the driver is loaded, the driver must now provide an interface to control the expansion ROM write protection. This patch adds an exprom_wp debugfs interface that allows the hfi1_eprom user tool to disable the expansion ROM write protection by opening the file and writing a '1'. The write protection is released when writing a '0' or automatically re-enabled when the file handle is closed. The current implementation will only allow one handle to be opened at a time across all hfi1 devices. Reviewed-by:
Josh Collier <josh.d.collier@intel.com> Signed-off-by:
-
Leon Romanovsky authored
Verbs destroy callbacks are synchronous operations and can't be delayed. The expectation is that after driver returned from destroy function, the memory can be freed and user won't be able to access it again. Ditch workqueue implementation used in HNS driver. Fixes: d838c481 ("IB/hns: Fix the bug when destroy qp") Signed-off-by:
oulijun <oulijun@huawei.com> Signed-off-by:
-
Parav Pandit authored
When two netdev have same link local addresses (such as vlan and non vlan), two rdma cm listen id should be able to bind to following different addresses. listener-1: addr=lla, scope_id=A, port=X listener-2: addr=lla, scope_id=B, port=X However while comparing the addresses only addr and port are considered, due to which 2nd listener fails to listen. In below example of two listeners, 2nd listener is failing with address in use error. $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545& $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545 rdma_bind_addr: Address already in use To overcome this, consider the scope_ids as well which forms the accurate IPv6 link local address. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
IPv6 link local address for a VLAN netdevice has nothing to do with its resemblance with the default GID, because VLAN link local GID is in different layer 2 domain. Now that RoCE MAD packet processing and route resolution consider the right GID index, there is no need for an unnecessary check which prevents the addition of vlan based IPv6 link local GIDs. Signed-off-by:
-
- 22 Apr, 2019 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxSaeed Mahameed authored
Linux 5.1-rc1 We forgot to reset the branch last merge window thus mlx5-next is outdated and still based on 5.0-rc2. This merge commit is needed to sync mlx5-next branch with 5.1-rc1. Signed-off-by: -
Mark Bloch authored
Switchdev mode and mutiport RoCE mode aren't compatible at this point. Don't create IB reps when a user switches to switchdev mode and the driver operates in that mode. Signed-off-by:
-
Mark Bloch authored
When working in mutliport RoCE mode it is possible to attach a slave before the master. In that case the slave is waiting for a master to be attached. When the master is attached it goes over the list of waiting slaves, finds a slave that is compatible and tries to bind it to itself. The call stack is: mlx5_ib_init_multiport_master() -> mlx5_ib_bind_slave_port() In the bind function we will create a netdev notifier, but this is done before we initialize the RoCE structure (this is done at a later stage by the master in the ROCE stage). Once events are delivered to that notifier we will use mlx5_ib_get_native_port_mdev() to get the actual port and as the native port is zero we will access an invalid index in the port structure. Move the RoCE structure initialization to an earlier stage. Fixes: 32f69e4b ("{net, IB}/mlx5: Manage port association for multiport RoCE") Signed-off-by:
-
Mark Bloch authored
Remove the limitations that were in place and provide support for DEVX and raw flow creation on reps. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Add MLX5_OP_QUERY_ESW_VPORT_CONTEXT to devx white list. It will be allowed only if HCA_CAP.eswitch_manager==1. Signed-off-by:
-
Mark Bloch authored
Allow this only via mlx5 raw create flow API, legacy verbs are not supported. To accommodate that, we add a new attribute to matcher creation to indicate the type of flow table to be used. MLX5_IB_ATTR_FLOW_MATCHER_FT_TYPE With this new attribute MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS is no longer needed, we keep it for compatibility but at most only a single attribute can be passed of the two. When inserting a flow rule to the FDB we require that a DEVX FT is provided as a destination, no other configuration is allowed. Signed-off-by:
-
Mark Bloch authored
Instead of failing the request, just use the supported number of flow entries. Signed-off-by:
-
Mark Bloch authored
Now that we have a specific prio inside the FDB namespace allow retrieving it from the RDMA side. Signed-off-by:
-
Parav Pandit authored
Provide an option to change the net namespace of a rdma device through a netlink command. When multiple rdma devices exists in a system, and when containers are used, this will limit rdma device visibility to a specified net namespace. An example command to change net namespace of mlx5_1 device to the previously created net namespace 'foo' is: $ ip netns add foo $ rdma dev set mlx5_1 netns foo Signed-off-by:
-
Parav Pandit authored
Introduce a helper function that changes rdma device's net namespace which performs mini disable/enable sequence to have device visible only in assigned net namespace. Device unregistration, device rename and device change net namespace may be invoked concurrently. (a) device unregistration needs to wait if a device change (rename or net namespace change) operation is in progress. (b) device net namespace change should not proceed if the unregistration has started. (c) while one cpu is changing device net namespace, other cpu should not be able to rename or change net namespace. To address above concurrency, (a) Use unreg_mutex to synchronize between ib_unregister_device() and net namespace change operation (b) In cases where unregister_device() has started unregistration before change_netns got chance to acquire unreg_mutex, validate the refcount - if it dropped to zero, abort the net namespace change operation. Finally use the helper function to change net namespace of ib device to move the device back to init_net when such net is deleted. Signed-off-by: -
Parav Pandit authored
So we can use the disable_device() helper while changing the net namespace of the rdma device in a subsequent patch, move free_netdevs() out of it. Signed-off-by:
-
Chengguang Xu authored
Fix typo 'faspath' -> 'pastpath'. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
-
- 18 Apr, 2019 2 commits
-
-
Colin Ian King authored
There is a spelling mistake in a module parameter description. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Guy Levi authored
When scatter to CQE is enabled on a DCT QP it corrupts the mailbox command since it tried to treat it as as QP create mailbox command instead of a DCT create command. The corrupted mailbox command causes userspace to malfunction as the device doesn't create the QP as expected. A new mlx5 capability is exposed to user-space which ensures that it will not enable the feature on DCT without this fix in the kernel. Fixes: 5d6ff1ba ("IB/mlx5: Support scatter to CQE for DC transport type") Signed-off-by:
Guy Levi <guyle@mellanox.com> Signed-off-by:
-
- 16 Apr, 2019 1 commit
-
-
Colin Ian King authored
Currently if alloc_skb fails to allocate the skb a null skb is passed to t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid the NULL pointer dereference by checking for a NULL skb and returning early. Addresses-Coverity: ("Dereference null return") Fixes: b38a0ad8 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages") Signed-off-by:Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
