Some devices have more than 15 which was the previous
setting.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use iteration for scanning of PROM node siblings.

Based upon a patch by Greg Onufer, who found this bug.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the interrupt enable sequence for the sunzilog driver 
so that interrupts are not enabled untill after the interrupt handler has 
been installed. If this is not done, some SS1 and SS2 sun4c systems panic 
on un-handled interrupt before the handler gets installed preventing boot.

It also adds in support for the ESCC version of the zilog chips. The
changes mean that the FIFO will be enabled for ESCC versions of the
SCC UART. My interpretation of the SCC manual and the existing interrupt
handler code is that it sould be able to make good use of the FIFO without
issues.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

All the sun4u controllers do the same thing to compute the physical
I/O address to poke, and we can move the sun4v code into this common
location too.

This one needs a bit of testing, in particular the Sabre code had some
funny stuff that would break up u16 and/or u32 accesses into pieces
and I didn't think that was needed any more.  If it is we need to find
out why and add back code to do it again.
Signed-off-by: David S. Miller <davem@davemloft.net>

In the process of rewriting the x86 setup code, I found a number of
inaccuracies and outdated recommendations in the boot protocol
documentation.  Revamp to make it more up to date.

In particular, the common use of the heap actually requires (slightly)
more than 4K of heap plus stack, which is the recommended amount in
the document; currently the code compensates by being smaller than
specified, but we can't assume that will be true forever.  Thus,
recommend that if we have a modern bzImage kernel, that the bootloader
maximizes the available space.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert 'sched: redundant reschedule when set_user_nice() boosts a prio of a task from the "expired" array'

Revert commit bd53f96c.

Con says:

This is no good, sorry. The one I saw originally was with the staircase
deadline cpu scheduler in situ and was different.

  #define TASK_PREEMPTS_CURR(p, rq) \
     ((p)->prio < (rq)->curr->prio)
     (((p)->prio < (rq)->curr->prio) && ((p)->array == (rq)->active))

This will fail to wake up a runqueue for a task that has been migrated to the
expired array of a runqueue which is otherwise idle which can happen with smp
balancing,

Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Con Kolivas <kernel@kolivas.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have a standard suffix to associate a designation string to a sensor:
_label.  Use it instead of _position so that libsensors will catch it.
(This isn't implemented yet, but should be soon.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Let the applesmc device export its address to userspace.  libsensors needs
this to recognize the device and give it a unique ID.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Zero-sized allocations are pointless anyway, and the SLUB allocator
complains about them, so stop doing that.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The recent <linux/pci.h> cleanup uncovered that include/asm-m68k/scatterlist.h
needs to include <linux/types.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Miscellaneous fixes to bring FRV up to date:

 (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out
     the syscall table in entry.S too.

 (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so
     that determine_clocks() can access them when CONFIG_PM=y.

 (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is
     available (fixes commit 2fd3beba).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/pid/clear_refs is only defined in the CONFIG_MMU case, so make sure we
don't have any references to clear_refs_smap() in generic procfs code.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is to fix unnecessary __meminit definition.  These are exported for
kernel modules.

I compiled on ia64/x86-64 with memory hotplug on/off.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] cryptomgr: Fix use after free

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Optimize fault kprobe handling just like powerpc.
  [SPARC]: Wire up utimensat syscall.
  [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
  [SPARC64]: Kill asm-sparc64/pbm.h
  [ATYFB]: Fix sparc includes.
  [QLA2XXX]: Fix build on sparc.
  [SPARC64]: Removal of trivial pci_controller_info uses.
  [SPARC64]: Move index info pci_pbm_info.
  [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.
  [SPARC64]: Move pci_ops into pci_pbm_info.
  [SPARC64] SBUS: Error interrupt registry cleanups.
  [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
  [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.
  [SPARC64] PCI: Use common routine to fetch PBM properties.

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
  [SCSI] zfcp: clear boxed flag on unit reopen.
  [SCSI] zfcp: clear adapter failed flag if an fsf request times out.
  [SCSI] zfcp: rework request ID management.
  [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
  [SCSI] zfcp: Locking for req_no and req_seq_no
  [SCSI] zfcp: print S_ID and D_ID with 3 bytes
  [SCSI] ipr: Use PCI-E reset API for new ipr adapter
  [SCSI] qla2xxx: Update version number to 8.01.07-k7.
  [SCSI] qla2xxx: Add MSI support.
  [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
  [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
  [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
  [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
  [SCSI] zfcp: Stop system after memory corruption
  [SCSI] mesh: cleanup variable usage in interrupt handler
  [SCSI] megaraid: replace yield() with cond_resched()
  [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
  [SCSI] aacraid: correct SUN products to README
  [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
  [SCSI] aacraid: kexec fix (reset interrupt handler)
  ...

This reverts commit 464bdd33.

Peter Anvin correctly points out that VESA modes have nothing to do with
frame buffers per se - they are often just regular extended text modes.
Disabling them just because we don't have frame buffer support is very
wrong.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

.. to match what we do on write().  This way, people who write to files
by using [f]truncate + writable mmap have the same semantics as if they
were using the write() family of system calls.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

By the time kthread_run returns the param may have already been freed
so writing the returned thread_struct pointer to param is wrong.

In fact, we don't need it in param anyway so this patch simply puts it
on the stack.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

And eliminate DIE_GPF while we're at it.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Everything it contains can be hidden in pci_impl.h
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to use asm/pbm.h here.
Signed-off-by: David S. Miller <davem@davemloft.net>

We now use pci_device_to_OF_node() to get properties
and of_get_property() returns const pointers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Do not use IRQF_SHARED, these interrupt numbers should all
be unique.

Also use name strings without spaces in them just like
PCI controller drivers do, for consistency.
Signed-off-by: David S. Miller <davem@davemloft.net>

The idea is to move more and more things into the pbm,
with the eventual goal of eliminating the pci_controller_info
entirely as there really isn't any need for it.

This stage of the transformations requires some reworking of
the PCI error interrupt handling.

It might be tricky to get rid of the pci_controller_info parenting for
a few reasons:

1) When we get an uncorrectable or correctable error we want
   to interrogate the IOMMU and streaming cache of both
   PBMs for error status.  These errors come from the UPA
   front-end which is shared between the two PBM PCI bus
   segments.

   Historically speaking this is why I choose the datastructure
   hierarchy of pci_controller_info-->pci_pbm_info

2) The probing does a portid/devhandle match to look for the
   'other' pbm, but this is entirely an artifact and can be
   eliminated trivially.

What we could do to solve #1 is to have a "buddy" pointer from one pbm
to another.
Signed-off-by: David S. Miller <davem@davemloft.net>

They are totally unused.
Signed-off-by: David S. Miller <davem@davemloft.net>

Namely bus-range and ino-bitmap.

This allows us also to eliminate pci_controller_info's
pci_{first,last}_busno fields as only the pbm ones are
used now.
Signed-off-by: David S. Miller <davem@davemloft.net>

As mmc_detect_change() can be called from irq context, using
claim (which can sleep) is inherently unsafe. Use the host
spinlock instead, which also is faster.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Socket power must be fully controlled by adapter driver. This also prevents
unnecessary power-off of the socket when media driver is unloaded, yet
media remains in the socket.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits)
  Use menuconfig objects - hwmon
  hwmon/smsc47b397: Use dynamic sysfs callbacks
  hwmon/smsc47b397: Convert to a platform driver
  hwmon/w83781d: Deprecate W83627HF support
  hwmon/w83781d: Use dynamic sysfs callbacks
  hwmon/w83781d: Be less i2c_client-centric
  hwmon/w83781d: Clean up conversion macros
  hwmon/w83781d: No longer use i2c-isa
  hwmon/ams: Do not print error on systems without apple motion sensor
  hwmon/ams: Fix I2C read retry logic
  hwmon: New AD7416, AD7417 and AD7418 driver
  hwmon/coretemp: Add documentation
  hwmon: New coretemp driver
  i386: Use functions from library in msr driver
  i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu
  hwmon/lm75: Use dynamic sysfs callbacks
  hwmon/lm78: Use dynamic sysfs callbacks
  hwmon/lm78: Be less i2c_client-centric
  hwmon/lm78: No longer use i2c-isa
  hwmon: New max6650 driver
  ...

Commit c5a4dd8b introduced the following
compiler warnings:

net/sunrpc/sched.c:766: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'size_t'
net/sunrpc/sched.c:785: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'size_t'

  - Use %zu to format size_t
  - Kill 2 useless casts
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Add lockdep support for XFS
  [XFS] Fix race in xfs_write() b/w dmapi callout and direct I/O checks.
  [XFS] Get rid of redundant "required" in msg.
  [XFS] Export via a function xfs_buftarg_list for use by kdb/xfsidbg.
  [XFS] Remove unused ilen variable and references.
  [XFS] Fix to prevent the notorious 'NULL files' problem after a crash.
  [XFS] Fix race condition in xfs_write().
  [XFS] Fix uquota and oquota enforcement problems.
  [XFS] propogate return codes from flush routines
  [XFS] Fix quotaon syscall failures for group enforcement requests.
  [XFS] Invalidate quotacheck when mounting without a quota type.
  [XFS] reducing the number of random number functions.
  [XFS] remove more misc. unused args
  [XFS] the "aendp" arg to xfs_dir2_data_freescan is always NULL, remove it.
  [XFS] The last argument "lsn" of xfs_trans_commit() is always called with

* 'reset-seq' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata reset-seq] build and merge fixes
  libata: reimplement reset sequencing
  libata: improve ata_std_prereset()
  libata: improve 0xff status handling
  libata: add deadline support to prereset and reset methods